Asset Tag - User Manual Description The asset tag is a long life, cost-effective proximity tag with multiple mounting options. The asset tag is intended to be attached an asset by the methods outlined in this user manual. Safety Recommendations Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. Do not disassemble, dismantle, open, crush puncture, or shred the product. If the product housing/envelope is weakened, cracked, or broken, stop using it immediately. Do not attempt to short-circuit the battery or make contact with a conductive/metal object. Do not expose the product to heat, fire or flame. Only CR2450 batteries can be used in this product. Keep out of reach of children. Dispose of all batteries in accordance with applications laws and regulations. Failure to follow these instructions can result in personal injury or property damage, and the manufacturer will have no liability whatsoever for any such injury or damage arising from or in connection with any failure to follow these or other instructions provided to the end user. Le non-respect de ces instructions peut entraner des blessures corporelles ou des dommages matriels, et fabricant dcline toute responsabilit en cas de blessure ou de dommage rsultant de ou en relation avec le non-respect de ces instructions ou d'autres instructions fournies l'utilisateur final. Product Description The product is designed to track and locate assets. Asset Tag Features and Sensors:
- 2.4 GHz radio
- CR2450 battery
- (3) LEDs
- Attach to equipment using zip tie through eyehole or two-sided adhesive.
- Accelerometer and temperature sensors The product has the following exterior dimensions: 44.5 mm x 29 mm x 7 mm. 2 Back Label The sticker on the back of the device provides the main product information. The TAG ID is necessary to provision the device. This information is encoded in the QR code. Do not remove the label or other proprietary notices or logos affixed to the device. Ne retirez pas l'autocollant ou d'autres mentions de proprit ou logos apposs sur l'appareil. Characteristics Listed below are the main performance characteristics:
Features Use LED Usage Power Internal supply Description Indoor Only Thee (3), Red Continuous CR2450 Battery Only 3V DC 3 Relative humidity environment Less than 95% non-condensing humidity Features Frequency band Max Output power Operating temperature Storage temperature Temperature Measurement Humidity Measurement Accelerometer Description 2.4GHz ISM Band
+4Bm conducted From -30C to + 60C noncondensing From 0C to +35C noncondensing 1 Range: -30C to + 60C Precision: +/- 1C Mechanical dimensions (in millimeters) 44.5 mm x 29 mm x 7 mm Absolute accuracy tolerance: +/- 3 %RH over 20..80%RH at 25C Full relative humidity scale temperature range: 0 to 60C Long Term stability: +/-0,5 %RH/year Configurable range :2/4/8/16 g Resolution: 1mg Sampling rate: 0, 1.6, 12.5, 26, 52, 104, 208, 416, 833, 1660, 3330, 6660 Hz Installing the Tag The product is designed to have a small footprint and be attatched to customer equipment objects using the provided 3M adhesive or zip tie using the keyhole on the deivce. Adhesive Before adhering the device to the asset surface, clean it using an 50/50 mixture of isopropyl alcohol and water can remove dust and oils on the surface to prep for good adhesion. Ideal application temperature range for adhesive application is 70F to 100F (21C to 38C) but as low as 32F
(0C) is acceptable. The adhesive will bond to a broad range of high surface energy substrates including metals, glass, plastics and easier to bond paints. 1 The indicated storage temperature range is intended to maximize the battery life and avoid unexpected discharge during storage. The product can be exposed to an increased temperature range than the indicated storage temperature range (as long as it stays within operating temperature range), but exposure to more extreme temperatures during storage may reduce battery life. 1 La plage de temprature de stockage indique est destine maximiser la dure de vie de la batterie et viter une dcharge inattendue pendant le stockage. Le produit peut tre expos une plage de tempratures plus leve que la plage de tempratures de stockage indique (tant qu'il reste dans la plage de tempratures de fonctionnement), mais une exposition des tempratures plus extrmes pendant le stockage peut rduire la dure de vie de la batterie. 4 1. Using included Tag double-sided adhesive, remove one side of the protective film and secure it to the blank side of the Tag a. Avoid obscuring Tag QR code 2. Remove the other of side of the protective film and apply securely to the asset Zip Tie 1. Separately, procure zip tie 2. Loop zip tie through keyhole on Asset Tag and connect to the asset Activation 1. Pull the battery tab to turn on Tag 2. Using asset tracking software, a. Scan Tag QR code or manually enter Tag ID b. enter asset information c. Confirm successful pairing by pressing SUBMIT Button & LED Behavior LED Blink Rate:
Fast Blink (0.1 seconds each) Atypical Activity Slow Blink (1.0 seconds each) Normal Activity
LED Actions:
Device Action Powered Off Power On Firmware Update Regulatory Notices LED N/A
Blink Count N/A 2 10 This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to indoor use only. 5 Compliance with 47 CFR Part 15 Regulation Class B Devices changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the product. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED Notice of Compliance CAN ICES-3(B) / NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
1) L'appareil ne doit pas produire de brouillage;
2) L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Avis de conformit aux normes dIndustrie Canada (IC). Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Son exploitation est autorise aux deux conditions suivantes:
il ne doit pas produire de brouillage; et il doit accepter tout brouillage radiolectrique subi, mme si celui-
ci est susceptible den compromettre le fonctionnement. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to Avertissement: les changements ou modifications apports cet appareil non expressment approuvs par la partie responsable de la conformit peuvent annuler le droit de l'utilisateur faire fonctionner l'quipement. operate the equipment. 6