FCC ID: 2ABU6-STAG29 Electronic Shelf Label

FCC Requirement changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turn-

ing the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that towhich the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. AddressBuilding I, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen, 518109, China Phone+86(755)2103 8160 Email: info@minewtag.com Website https://www.minewtag.com

20.0 mm Model:STag29R 6.5 mm FCC ID:2ABU6-STAG29 11.2 mm 4.6 mm 1

. 5 m m 6

. 4 m m 2 2 5.1 mm

. 0 m m 5

. 0 m m 7

. 0 m m 3

. 0 m m 5

. 0 m m 12.0 mm Model:STag29R FCC ID:2ABU6-STAG29 1

. 5 m m 1 1

. 7 m m 5

. 0 m m 7

. 0 m m 3

. 0 m m 5

. 0 m m

Shenzhen Minew Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 5/18/2023

[Shenzhen Minew Technologies Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2ABU6-STAG29):

Name and company of U.S. agent: Sijie Zhang / THREE STONES MEDIA LLC Physical U.S. address of agent: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN of U.S. agent: 0033401761 Email address of U.S. agent: abbyzhangmedia@gmail.com

[THREE STONES MEDIA LLC] acknowledges their obligation to accept service of process on behalf of [Shenzhen Minew Technologies Co., Ltd.].

[Shenzhen Minew Technologies Co., Ltd.] with the FRN [0023364128] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] yanyan Zhang

[Title] Quality Supervisor

[Company] Shenzhen Minew Technologies Co., Ltd. Signature

[Name of U.S. agent] Sijie Zhang

[Title of U.S. agent]

[Company of U.S. agent] THREE STONES MEDIA LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. 4 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Shenzhen Minew Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 5/17/2023 To whom it may concern:

We, [Shenzhen Minew Technologies Co., Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID: 2ABU6-STAG29) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature

[Name] yanyan Zhang

[Title] Quality Supervisor

[Company] Shenzhen Minew Technologies Co., Ltd. 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9

. 2 _ u q E d e r e v o C

l e d o m

_ 2 6 The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.