FCC ID: 2ABU6-MBS01 Pallet Beacon

Brief Introduction MBS01 with nRF52 series chip and supporting BLE 5.0 protocol is a low-consumption beacon for trailer tracking; it is easily installed on the trailer or forklifts due to its special design; Besides, based on the indoor positioning technology, the product can help industries including factory manufacturing and warehouse management to achieve digital and visual management on assets. Key Features BLE 5.0 & nRF52 Series 40 Months of Service Life Accidental Shutdown Prevention Ik08 Shockproof IP65 Waterproof & Dustproof 100m Broadcasting Distance Market Applications Smart Warehouse Management Smart Industrial Manufacturing Device Specifications Basic Parameters Item Material Color Protection DimensionsL*W*H Net Weight Value ABS Black/Grey IP65IK08 116.1*25.2*9.2mm Remarks Null Optional Null Null 19g Battery included Battery Battery Lifetime Chip Model Bluetooth Standard 1 pc CR series battery pack 2 pcs units included 40 Months nRF52 series BLE 5.0 Bluetooth Protocol iBeacon & Eddystone Configuration App BeaconSET +

440mAh total capacity by default Null Null Null Null Sensors NFC LED OTA Operating Temperature No No No No

-20~60 Null Null Null Null Null Default Broadcasting Parameters(BeaconPlus Firmware) Type iBeacon

(On) UID

(Off) URL

(Off) TLM

(Off) INFO

(On) Sensor

(Off) Password Connectable Item UUID (16bytes) Major (2bytes) Minor (2bytes) Measured power Tx power Interval (ms) Instance ID Namespace ID Measured power Tx power Interval (ms) URL Default Settings E2C56DB5-DFFB-48D2-B060-D0F5A71 096E0 0 0

-59dBm (0xC5) 0dBm 2000ms Random Random

-24dBm (0xE8) 0dBm 2000ms http://www.minew.com/

Measured power

-24dBm (0xE8) Tx power Interval (ms) Electricity mV PDU packets Boot-time 0dBm 2000ms By default By default By default Measured power

-24dBm (0xE8) Tx power Interval (ms) Device Name Electricity MAC Address Measured power Tx power Interval (ms) Sensor data minew123 Yes 0dBm 4000ms MBS01 By default Factory setting

-24dBm (0xE8)

-8dBm 4000ms No By default It is configuration mode Compatibility Systems Support iOS 10.0 and above Android 4.3 and above Product Appearance Version Support iPhone 6/6Plus/6S/6S Plus, iPhone 7/7Plus, iPhone8/8 Plus, iPhone x/xr/xs/xs max, iPhone 11/11 pro/11 pro max, iPad mini/mini2/4/Air/Pro, etc. SAMSUNG, MIUI, HUAWEI, ONEPLUS, VIVO, OPPO, etc. Installations Methods: Double-side adhesive tape & Screw installation Details:

Double-side adhesive notes:

Recommended Installation Environment: The material surface should be Aluminum, galvanized steel, enamel steel, stainless steel, ceramic, glass/epoxy resin, acrylic, PBT, ABS, PC, hard PVC, etc. Temperature Range: 10 ~ 75 Best Temperature: 21 ~ 38, use in a low-temperature Requirements: No dust on the material surface and clean it before installation. Before increasing the viscosity with a hairdryer, or sticking it over half-hours at a pasting, reasonable temperature and then pressing for 2 seconds and repeat for better stability. Screw installation notes:

Recommended Installation Environment: Screws installation should be considered on the wooden pallet, iron shelf, etc. Temperature Range: -20 ~ 60 Detail Steps:

First Step: drill screw holes on the surface of a hard surface to be installed. Second: put the green expansion plug into the screw holes on the hard surface to be installed. The Last: put the screws into the green expansion plug, and install the product in the direction of screw holes. Notes: the diameter of screws hole is 6mm; the installation above is only as a reference; users should install the product according to the actual situation. Cautions The product is designed with no button and switched on when shipping for avoiding the false trigger, and it also cannot be switched off by configuration app until the battery is exhausted. In a humid environment, the product needs to be installed according to its waterproof grade, and should avoid soaking for a long-time. BLE beacons should be installed away from obstacles and corners. It is not recommended users turn on all broadcasting frames for a long service life. It would be damaged by using over the normal operating temperature. Please avoid the direct sunshine so that damages the shell and affects the shockproof grade. The Minew group will not be responsible for the damage or injury by illegally dissembling the main body. Product Package Items Inner Box (Battery excluded) Outer Box (Battery excluded) Package Picture Quantity Net Weight Gross Weight Dimensions Certifications 36 Pcs/box 684g/box 762g/box 360 Pcs/box 6.84kg/box 8.1kg/box 30.5 x 11 x 7.2 cm 32 x 23.5 x 40 cm FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance co uld void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructi ons, may cause harmful interference to radio communications. However, there is no guarantee th at interference will not occur in a particular installation. If this equipment does cause harmful int erference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is con nected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ ment. This equipment should be installed and operated with minimum distance 20cm between t he radiator & your body. Quality Assurance The factory has already obtained the certification of ISO9001 Quality System. Each product has been strictly tested (testing include transmission power, sensitivity, power consumption, stability, aging, etc.). Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded). Declaration Rights Statement The contents of this manual belong to the Manufacturer of Minew Technologies Co., LTD, Shenzhen, and protected by Chinese laws and applicable international conventions related to copyright laws. The contents can be revised by the company according to the technological development without prior notice. Anyone, companies, or organizations cannot modify the contents and cite the contents of this manual without Minews permission, otherwise, Violators will be held accountable according to law. Disclaimer Minew team reserves the right to the final explanation of the document and product differences. The Minew group is not responsible for liability of property or personal injury with the wrong operation if users develop related products without checking the technical specifications of this manual. Contact Information Manufacturer: Shenzhen Minew Technologies Co., Ltd. Phone: +86(755) 2103 8160 Email: info@minew.com Address: No.8, Qinglong Road, Longhua District, Shenzhen, China https://www.minew.com http://www.minewstore.com

Arial 6pt 10.0 mm 4

. 1 m m Pallet Beacon ModelMBS01 FCC ID: 2ABU6-MBS01 1

. 5 m m Pallet Beacon ModelMBS01 FCC ID: 2ABU6-MBS01

Shenzhen Minew Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 7/12/23

[Shenzhen Minew Technologies Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2ABU6-MBS01):

Name and company of U.S. agent: Sijie Zhang / THREE STONES MEDIA LLC Physical U.S. address of agent: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN of U.S. agent: 0033401761 Email address of U.S. agent: abbyzhangmedia@gmail.com

[THREE STONES MEDIA LLC] acknowledges their obligation to accept service of process on behalf of [Shenzhen Minew Technologies Co., Ltd.].

[Shenzhen Minew Technologies Co., Ltd.] with the FRN [0023364128] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] yanyan Zhang

[Title] Quality Supervisor 4 0 V

[Company] Shenzhen Minew Technologies Co., Ltd.

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Name of U.S. agent] Sijie Zhang

[Title of U.S. agent]

[Company of U.S. agent] THREE STONES MEDIA LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Shenzhen Minew Technologies Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/12/23 To whom it may concern:

We, [Shenzhen Minew Technologies Co., Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID: 2ABU6-MBS01) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature

[Name] yanyan Zhang

[Title] Quality Supervisor

[Company] Shenzhen Minew Technologies Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6