Datasheet Ultra-Long Range Beacon Model: MBM01 Version: 001 0ft
(0m) 656ft 656ft
(200m) 1509ft
(460m) 01 Version: 001 BRIEF INTRODUCTION MBM01 with simple and stylish design is a Bluetooth location beacon dedicated to positioning and marketing. It has ultra-long broadcast distance, super long battery life and high protection level. Supporting BLE 5.0 technology, it can quickly locate personnel through indoor positioning technology and push marketing information in real time. In addition, the broadcast distance can reach up to 1509ft(460m) and above, it can be reasonably deployed in public places such as airports and railway stations to manage the human trafc and respond to emergency happening by cooperating with the BLE gateway. KEY FEATURS BLE 5.0 &
nRF52 Series Up to 10 years Service Lifetime Up to 1509ft(460m) Broadcasting Distance IP67 Waterproof &
Dustproof Compatible with 1Mbps / 125Kbps External Operation Button APPLICATION SENARIOS Shopping Habits Analysis &
Precision Marketing Information Pushing &
Indoor Navigation Medical Consultation Tracking
& Safety Responding Based on the Bluetooth positioning technology and relative software development, users can collect data of customer shopping habits &
behaviors for precision marketing. Also, the collected data can help users to adjust the commodity category or display to improve the economic prots. Through the reasonable installation of MBM01 in airports, helping passengers save time to nd the right boarding gate or proximity shops. Likewise, the admins can push information, such as ight or promotion information, to the users mobile phone for message notica-
tion and proximity marketing. In a general hospital, based on the indoor positioning technology and relative software development, the admin can collect data of daily medical the consultation reasonable arrangement of medical the resources. Also, reasonable installation of MBM01 in hospitals, the admin can locate every safe-guards positions for fast responding once emergency happening. through for 02 Version: 001 1509ft
(460m) DEVICE SPECIFICATIONS BASIC PARAMETERS Material Color Plastic PC+ABS White DimensionsL*W*H 72*72*23mm Protection Net Weight Battery Battery Lifetime Chip Model Bluetooth Standard Bluetooth Protocol Conguration App Sensors OTA NFC LED IP67 129g / 153.4g nRF52 series BLE 5.0 iBeacon & Eddystone BeaconSET +
No Yes No Yes Operating Temperature
-20
~65
/ -18~50 Lithium / Alkaline Battery Total capacity: 10800mAh / 5800mAh 6 years (125Kbps) / 10 years (1Mbps) Default setting: 8dBm, 900ms Null Null Null Null Lithium/Alkaline Battery Included Null Null Null Null Accelerator Optional Null Null Red/Green/Blue Light Lithium/Alkaline Battery 03 Version: 001 DEFAULT BROADCASTING PARAMETERS(BEACONPLUS FIRMWARE) iBeacon
(On) UID
(Off) URL
(Off) TLM
(Off) INFO
(Off) Extra Function UUID(16bytes) Major(2bytes) Minor(2bytes) MBM01C56DB5-DFFB-48D2-B060-D0F5A71096E0 0 0 Measured power
-59dBm(0xC5) Tx power Interval(ms) Instance ID Namespace ID Measured power Tx power Interval(ms) URL 8dBm 900ms Random Random
-24dBm(0xE8) 8dBm 900ms http://www.minew.com/
Measured power
-24dBm(0xE8) Tx power Interval(ms) Electricity mV PDU packets Boot-time 0dBm 2000ms By default By default By default Measured power
-24dBm(0xE8) Tx power Interval(ms) Device Name Electricity MAC Address Measured power Tx power Interval(ms) Password Connectable Reset factory Update rmware 0dBm 4000ms MBM01 By default Factory setting
-24dBm(0xE8)
-8dBm 4000ms minew123(congurable) Yes(it is conguration mode) available available COMPATIBILITY SYSTEMS SUPPORT iOS 10.0 and above(1mbps VERSION SUPPORT iPhone 5/5C/5S, iPhone 6/6Plus/6S/6S Plus,iPhone 7/7Plus, iPhone 8/8Plus/
iPhone x/xr/xs/xs max, iPhone SE/SMBM01, iPhone 11/11 pro/11 pro max... Android 4.3 and above(1mbps) SAMSUNG, MIUI, HUAWEI, ONEPLUS, VIVO, OPPO,etc. Remark: iOS system cannot receive 125Kbps but 1Mbps currently. Android system can receive both 1Mbps and 125Kbps, but the mobile devices should be compatible with BLE 5.0 & Android 8.0 and above. More details please contact our sales team. 04 Version: 001 PRODUCT APPEARANCE PRODUCT APPEARANCE INSTALLATIONS Methods: Double-side adhesive tape & Screw bracket installation Double-side adhesive notes:
Recommended Installation Environment: The material surface should be Aluminum, galvanized steel, enamel steel, stainless steel, ceramic, glass/epoxy resin, acrylic, PBT, ABS, PC, hard PVC, etc. Best Temperature: 21 ~ 38 Requirements: No dust on the material surface and clean it before installation. Before pasting, increasing the viscosity with a hairdryer, or sticking it over half-hours at a reasonable temperature and then pressing for seconds and repeat for better stability.
, use in a low-temperature. Screw bracket notes:
The arrow of button pointing up is the direction of the antenna, please install the device as the picture shown for better broadcast signal. Recommended Installation Environment: Screws installation should be on a hard surface, such as a wall where is not loose. Temperature Range: same with the operating temperature. Detail Steps:
1 Put the MBM01 into the installation bracket. Drill screw holes on the surface of a hard surface to be installed. Put the green expansion plug into the screw holes on the hard surface to be installed. Put the screws into the green expansion plug, and install the product in the direction of screw holes. 2 3 4 CAUTIONS Press and hold button for 3.6s until the blue light shine for 3s to turn it on; turn it off through the shut-down button on the BeaconSET+ APP, and the blue light will ash 5 times. The blue light ashes 2 times when BeaconSET+ connects the devices successfully; ashes 3 times to show the disconnec-
tion with BeaconSET+ APP. Click the button to re-enter into the congurable page to connect the device after the unconnectable mode. Decreasing the power and increasing the broadcasting interval can extend the lifetime of BLE beacons if it is used in a proper environment. The device will be shut-down for shipping. Please use the device on the suggested working temperature for safety. Minew will not be responsible for the damage caused by disassembling the product. 05 Version: 001 PRODUCT PACKAGE Items Inner Box(Battery included) Outer Box(Battery included) Package Picture 30.5cm 11cm 7.2cm 12.5cm m 2 c 3 40cm Quantity Dimensions 8 Pcs / box 30.5 x 11 x 7.2 cm 40 Pcs / box 32 x 12.5 x 40 cm CERTIFICATIONS CE Regulation FCC Regulation FCC REQUIREMENT changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 2 this device may not cause harmful interference. this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstalla-
tion. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference-
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction 05 Version: 001 QUALITY ASSURANCE The factory has already obtained the certication of ISO9001 Quality System. Each product has been strictly tested (testings include transmission power, sensitivity, power consumption, stability, aging, etc.). Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded). DECLARATION Rights Statement The contents of this manual belong to the Manufacturer of Minew Technologies Co., LTD, Shenzhen, and protected by Chinese laws and applicable international conventions related to copyright laws. The contents can be revised by the company accord-
ing to the technological development without prior notice. Anyone, companies, or organizations cannot modify the contents and cite the contents of this manual without Minews permission, otherwise, Violators will be held accountable according to law. Disclaimer Minew team reserves the right to the nal explanation of the document and product differences. The Minew group is not responsible for liability of property or personal injury with the wrong operation if users develop related products without check-
ing the technical specications of this manual. SHENZHEN MINEW TECHNOLOGIES CO., LTD.
+86 (755) 2103 8160 www.minew.com info@minew.com www.minewstore.com No.8,QinglongRoad, LonghuaDistrict, Shenzhen, China