FCC ID: 2A5MW-XS14PRO Mini smartphone

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:

This Mini smartphone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: XS14Pro

(FCC ID: 2A5MW-XS14PRO) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.194W/kg and when properly worn on the body is 0.837W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

SOYE:S $3 Model: x$14 Pro TD-LTE Digital mobile telephone MLL RL CT IMEI 1-86 aS 19337 ie LT ee Tae IMAE! 2 861507060391945 Manufacturer: Shenzhen SOYES Premium Technology Co., Ltd ACSV == 1A SsOveSs WIM TD-LTE Digital mobile telephone | MEI: 866585020700004 ree rozasww-xsiaero IIIB MMIII IMEI2 : 866585020751312 Color: O Grape purple Midnight black 0 Rouge powder Shenzhen SOYES Premium Technology limited ce Fe

Shenzhen SOYES Premium Technology limited Section 2.911(d)(5)(i) Certification Equipment Type Company name: Shenzhen SOYES Premium Technology limited Address: 502 West Gate, Building 427, Bagua Ling Industrial Zone, No.47 Bagua Fourth Road, Futian District, Shenzhen, 518000, China Product Name: Mini smartphone FCC ID: 2A5MW-XS14PRO Model(s): XS14Pro, XS15Pro, XS16Pro, P60Pro,M80Pro, XS88Pro, XS17Pro, W88Pro, SOYES M1Pro, K13, D13, i14mini, S202306 2.911(d)(5)(i) Equipment Type We, [Shenzhen SOYES Premium Technology limited] certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: xueping zhang Date: 2023-06-28 Title and Company name: Sales Manager/ Shenzhen SOYES Premium Technology limited NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Shenzhen SOYES Premium Technology limited Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Shenzhen SOYES Premium Technology limited Address: 502 West Gate, Building 427, Bagua Ling Industrial Zone, No.47 Bagua Fourth Road, Futian District, Shenzhen, 518000, China Product Name: Mini smartphone FCC ID: 2A5MW-XS14PRO Model(s): XS14Pro, XS15Pro, XS16Pro, P60Pro,M80Pro, XS88Pro, XS17Pro, W88Pro, SOYES M1Pro, K13, D13, i14mini, S202306 2.911(d)(5)(ii) Applicant filing We, [Shenzhen SOYES Premium Technology limited] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: xueping zhang Date: 2023-06-28 Title and Company name: Sales Manager/ Shenzhen SOYES Premium Technology limited NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Shenzhen SOYES Premium Technology limited Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen SOYES Premium Technology limited Address: 502 West Gate, Building 427, Bagua Ling Industrial Zone, No.47 Bagua Fourth Road, Futian District, Shenzhen, 518000, China Product Name: Mini smartphone FCC ID: 2A5MW-XS14PRO Model(s): XS14Pro, XS15Pro, XS16Pro, P60Pro,M80Pro, XS88Pro, XS17Pro, W88Pro, SOYES M1Pro, K13, D13, i14mini, S202306 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen SOYES Premium Technology limited] designate [Linkwld LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Linkwld LLC Address: 1942 Broadway St. STE 314C, Boulder, CO, 80302, US Applicant Company name: Shenzhen SOYES Premium Technology limited Address: 502 West Gate, Building 427, Bagua Ling Industrial Zone, No.47 Bagua Fourth Road, Futian District, Shenzhen, 518000, China FRN:

0033625682 Contact Name: Timothy Zhu FCC ID Number: 2A5MW-XS14PRO Contact Name: xueping zhang 2.911 (d)(7)USA Agent v1.2 Shenzhen SOYES Premium Technology limited Telephone No: +1-716-963-4572 Email: Timothy.linkwld@proton.me Telephone No: 0755-83647157 Email: 1178374914@qq.com Signature:

Title: Manager Date: 2023-06-28 Signature:

Title: Sales Manager Date: 2023-06-28 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

Shenzhen SOYES Premium Technology limited Agent Authorization Company: Shenzhen SOYES Premium Technology limited Address: 502 West Gate, Building 427, Bagua Ling Industrial Zone, No.47 Bagua Fourth Road, Futian District, Shenzhen, 518000, China Product Name: Mini smartphone Model Number(s): XS14Pro, XS15Pro, XS16Pro, P60Pro,M80Pro, XS88Pro, XS17Pro, W88Pro, SOYES M1Pro, K13, D13, i14mini, S202306 Product Description: Mini smartphone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2023-06-28 Name:

xueping zhang Title:

Sales Manager Company: Shenzhen SOYES Premium Technology limited

Shenzhen SOYES Premium Technology limited Declaration on Model Differences We, Shenzhen SOYES Premium Technology limited 502 West Gate, Building 427, Bagua Ling Industrial Zone, No.47 Bagua Fourth Road, Futian District, Shenzhen, 518000, China Declare that the following product(s):

FCC ID: 2A5MW-XS14PRO Product Name: Mini smartphone Model No.: XS14Pro, XS15Pro, XS16Pro, P60Pro,M80Pro, XS88Pro, XS17Pro, W88Pro, SOYES M1Pro, K13, D13, i14mini, S202306 Utilize the identical circuit design, PCB layout, shielding and interface with (XS14Pro), only the model number and appearance color different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: xueping zhang Position: Sales Manager Date of issue: 2023-06-28

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

Shenzhen SOYES Premium Technology limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A5MW-XS14PRO Date: 2023-06-28 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: xueping zhang Title: Sales Manager

Shenzhen SOYES Premium Technology limited FCC Software Configuration Control Declaration Date: June 28, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Mini smartphone/ XS14Pro, XS15Pro, XS16Pro, P60Pro,M80Pro, XS88Pro, XS17Pro, W88Pro, SOYES M1Pro, K13, D13, i14mini, S202306 Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: xueping zhang Date: 2023-06-28 Title: Sales Manager Signature of applicant FCC Software Configuration Control Declaration Rev1.1