FCC ID: TZV-ET16S Model remote control with FHSS system

FCC Radiation Exposure Statement:

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: Model remote control (FCC ID: TZV-ET16S) has also been tested against this SAR limit. SAR information on this and other pad can be viewed on line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 0mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Reference No.: WTX22X04078653W001 Page 1 of 18 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: TZV-ET16S Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

ShenZhen WFLY Technology Development Co., Ltd. C3 Building,Xiangli Industrial Park,Haoye Road,Zhancheng Community,Fuhai Subdistrict Office,Baoan,Shenzhen,Guangdong,China

Date: 2022-06-15 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: TZV-ET16S To whom it may concern, Block Diagram Operational Description Schematics Parts List Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of the information accompanying this application as outlined below:

Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ShenZhen WFLY Technology Development Co., Ltd.

(Cheng Ji)

(General Manager)

ShenZhen WFLY Technology Development Co., Ltd. C3 Building,Xiangli Office,Baoan,Shenzhen,Guangdong,China Industrial Park,Haoye Road,Zhancheng Community,Fuhai Subdistrict

Product Name: Model remote control FCC ID: TZV-ET16S Model No.: ET16S, ET16X, ET16Pro, ET16 Model Declaration Letter Dear Regulatory Authority, Model(s): ET16X, ET16Pro, ET16 are same to the model ET16S these models are same PCB Layout, Schematics, BOM. Only for different model name and appearances for different market require. Sincerely yours, Signature: Cheng Ji / General Manager Date: 2022-06-15

ShenZhen WFLY Technology Development Co., Ltd. C3 Building,Xiangli Industrial Park,Haoye Road,Zhancheng Community,Fuhai Subdistrict Office,Baoan,Shenzhen,Guangdong,China

(FCC IDTZV-ET16S) POWER OF ATTORNEY DATE: 2022-06-15 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, ShenZhen WFLY Technology Development Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, ShenZhen WFLY Technology Development Co., Ltd.

(Cheng Ji)

(General Manager)

ShenZhen WFLY Technology Development Co., Ltd. Suppliers Declaration Of Conformity The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906 :

for the FCC SDoC Procedure Product Name: Model remote control Brand Nam: WFLY Model Number: ET16S, ET16X, ET16Pro, ET16 Report Number: WTX22X04078653W002 Its herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following importer / responsible party in United States:

Not Available at Certification Stage Company Name: N/A Company Address: N/A Telephone: N/A Fax: N/A Cheng Ji Name (Full name ) Person is responsible for marking this declaration:

General Manager Position / Title 2022-06-15 Legal Signature Date