FCC ID: 2AXY5-M9 3-in-1 Magnetic Wireless Charger

M9 3-in-1 Magnetic Wireless Charger USER MANUAL Preface:

Dear users, thank you for purchasing this product . ln order to further understand the product, please read this manual carefully before use.Wish you a pleasant experience. Specification:

Product interface: Type-C Product Details:

Charging stand Wireless charging area for mobile phone Magnetic charging area for Apple watch TWS headset charging area Indicator lamp Material: ABS+PC+Aluminum alloy Phone 15W Max Product display:

Input: 9V 2A/12V 1.5A Watch output : 3W Earphone output: 5W Phone output: 5W/7.5W/10W/15W Conversion efficiency: 83%

Product color: black/white (rubber oil) Compatible Devices:

* iPhone 13/13Pro/13Pro Max/13 mini/12/12 Pro/12 Pro Max/12/12 mini

* Apple Watch 7/6/SE/5/4/3/2.

* AirPods 3/ AirPods pro/ AirPods 2 Earphone 5W Max Watch 3W Max ABS+PC Indicator light 20 off IMPORTANT SAFETY INSTRUCTIONS Before Using the unit, please read the user manual carefully.

* Do not store device in a high-temperature environment, including heat caused by intense sunlight or other forms of heat.

* Do not place device in fire or other excessively hot environments. Exposure to fire or temperature above 212F (100) may cause explosion.

* Do not use the wireless charger in excess of its Q&A When I place the phone on the charger, it starts charging, but after a few minutes it stops and the light starts to flash. Why?

- 1. Make sure your device supports the Qi wireless charging function before using this wireless charger.

- 2. Check if you are using the QC 3.0 adapter to power our wireless charger, or test with another adapter. output rating. Overloading outputs above its rating

- 3. Test with other USB cables. may result in a risk of fire or injury to persons.

* Do not expose the wireless charger to rain or snow.

* Do not modify, repair or disassemble the unit. If you need to do so, please contact the manufacturer first.

- 4. Check whether your devices case contains metal. Magnetic and metal attachments will cause an LED flash and prevent charging. If the phone has a case, please make sure the thickness is less than 0.2 in or remove the case before charging.

* Switch off the wireless charger when not in use.

- 5. Please place the phone correctly. If the phone is The wireless charger will automatically switch off placed in the incorrect position, it will affect charging. when disconnected from its wall charger.

- 6. Restart your phone. USB-C port Aluminum alloy Why can't I charge my AirPods 2?

EU Compliance statement:

RF Specification

- 1. Make sure your device supports the wireless charging function. Shenzhen Yifeng Intelligent Technology Co., Ltd. Hereby declares this device in compliance with the

- 2. AirPods 2 is divided into two series; one supports essential requirements and other relevant provisions wireless charging and the other cannot support of Directive 2014/53/EU. WPT: 110KHz-148KHz Radiated H-Filed: -10.48dBuA/m (@10m) WPT for Watch: 300KHz-350KHz Radiated H-Filed: -25.8dBuA/m (@10m) wireless charging.

- 3. When your AirPods 2 has an indicator on the outside of the shell, it can support wireless charging. When your AirPods 2s indicator is inside the clam shell, it cant support wireless charging.

- 4. You can confirm by contacting the customer service. A copy of the EU Declaration of conformity is available online at /euro-compliance https://www.YFZN.com/

Manufacturer:

Shenzhen Yifeng Intelligent Technology Co., Ltd. Address:

10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China. UK compliance statement Shenzhen Yifeng Intelligent Technology Co., Ltd. Hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). A copy of the UK declaration of the conformity is available online at https://www.YFZN.com/

UKCA-compliance FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. THANK YOU FOR CHOOSIN G OUR P ROUDUCT

Shenzhen Yifeng Intelligent Technology Co., Ltd. C5266091_X10_Ed.1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AXY5-M9 To Whom It May Concern, Date: 10/11/2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ning Liu Date: 10/11/2022 Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Yifeng Intelligent Technology Co., Ltd. Address: 10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China. Product Name: 3-in-1 Magnetic Wireless Charger Model Number: M9 FCC Identifier: 2AXY5-M9 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ning Liu Date: 10/11/2022 Title: Manager Signature of applicant:

1/1