FCC ID: 2AXY5-M1C Magnetic Wireless Charger

(M1C Thank you for using our products, please read the instruction card carefully before use Specifications Model: M1C Input: 9V 2A Output: 15W Max Descript ion UK:

FCC Warning IC Caution:

This product has an adsorption function, which can accurately align the This device was tested for uncontrolled environment operations. To comply with This device complies with part 15 of the FCC Rules. Operation is subject to the Radio Standards Specification RSS-Gen, issue 5 charging position of the mobile phone. RF exposure requirements, a minimum separation distance of 20cm must be following two conditions:(1) This device may not cause harmful interference, and

(Mobile phone/phone case needs to be equipped with built-in magnet) maintained between the users body and the product.

(2) this device must accept any interference received, including interference Important Reminders Declaration of Conformity that may cause undesired operation.

- English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Cable length 1.5M

(Quick Charge) 2.0/3.0.Adapters are compatible with QC (Quick Charge) type M1C is in compliance with following Regulations: Radio Equipment Regulations for compliance could void the user's authority to operate the equipment. RSS(s). Operation is subject to the following two conditions:

1. For maximum charging speed, use a cable and adaptor compatible with QC Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd. declares that the product Any Changes or modifications not expressly approved by the party responsible Innovation, Science and Economic Development Canadas licence-exempt 2.0/3.0 or PD (Power Delivery) Quick Charge or PD (Power Delivery) fast charging. 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the This device may not cause interference. 2. This charger can only be installed on a caseless iPhone with magnetic suction Use of Certain Hazardous Substances in Electrical and Electronic Equipment This equipment has been tested and found to comply with the limits for a Class B This device must accept any interference, including interference that may cause 7MM or the official MagSafe case and ESR Halolock case. It will not connect to any Regulations 2012. The full text of the UK declaration of conformity is available at digital device, pursuant to part 15 of the FCC Rules. These limits are designed to undesired operation of the device. the following internet address:https://www.YFZN.com/

provide reasonable protection against harmful interference in a residential RF exposure statement:

installation. This equipment generates uses and can radiate radio frequency The equipment complies with IC Radiation exposure limit set forth for uncontrolled energy and, if not installed and used in accordance with the instructions, may environment. This equipment should be installed and operated with minimum cause harmful interference to radio communications. However, there is no distance 20cm between the radiator and your body. M1C(RoHS 57.8MM other phones or cases. 3. The charger has a maximum output of 15W. The maximum output of the iPhone is 7.5W. The maximum output power of the headset is 5W. Safety warning damage to the product. 2.Please check the product, data cable and other accessories before use. Immediately stop using the product if you notice any damage. 3. Do not use this product in a high temperature, humid or corrosive environment, so as not to damage the circuit and prevent charging or other 4. Do not contact the product with corrosive liquids, otherwise it will cause serious damage and the product will not be guaranteed. 5. Do not disassemble or modify this product for any reason, so as to avoid secondary failure and burning, which is not covered by the warranty Compatibility:

(Magnetic)iPhone 14 Pro Max/14 Pro/14 Plus/14/

13 Pro Max/13 Pro/13/13 mini/12 Pro Max/12 Pro/12/12mini

(Magnetic)AirPods 3/AirPods Pro2/AirPods Pro

(Please use a magnetic case to charge your phone) EU:

This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be Declaration of Conformity Hereby, Shenzhen Yifeng Intelligent Technology Co., Ltd.declares that the product type M2 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.YFZN.com/

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

- French:

to try to correct the interference by one or more of the following measures:

Cet appareil contient des metteurs / rcepteurs exempts de licence conformes

- Reorient or relocate the receiving antenna. aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada.

- Increase the separation between the equipment and receiver. Le fonctionnement est soumis aux deux conditions suivantes:

- Connect the equipment into an outlet on a circuit different from that to Cet appareil ne doit pas causer d'interfrences. which the receiver is connected. Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles Radiated H-Field 6.6 dBuA/m@10m

- Consult the dealer or an experienced radio/TV technician for help. de provoquer un fonctionnement indsirable de l'appareil. TX/RX Frequency Range 110-148kHz(Only for EU&UK) Shenzhen Yifeng Intelligent Technology Co., Ltd. 10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China. FCC RF exposure statement:

Dclaration d'exposition RF:

The equipment complies with FCC radiation exposure limits set forth for an L'quipement est conforme la limite d'exposition aux radiations de la IC tablie uncontrolled environment. This equipment should be installed and operated pour un environnement non contrl. Cet quipement doit tre install et utilis with minimum distance between 20cm the radiator your body. avec une distance minimale de 20 cm entre le radiateur et votre corps. 1.Do not put this product into fire or water to avoid short circuit leakage or maintained between the users body and the product. 250 70X90mm 140X90mm 2023/4/11

(M1C 34.47mm Magnetic Wireless Charger Model:M1C Input: 9V 2A Output: 15W Max FCC ID: 2AXY5-M1C S/N: 44885 IC: 29029-M1C HVIN: YF-M1C-V2 Shenzhen Yifeng Intelligent Technology Co., Ltd. Made in China 10.44mm 28.02mm 1 Magnetic Wireless Charger Model:M1C Input: 9V 2A Output: 15W Max FCC ID: 2AXY5-M1C S/N: 44885 IC: 29029-M1C HVIN: YF-M1C-V2 Shenzhen Yifeng Intelligent Technology Co., Ltd. Made in China PANTONE Cool Gray 8c M1C YF20230107A01-M1C A01 2023/1/7

C5266091_X24_Ed.1 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization 2AXY5-M1C Applicant Company name: Shenzhen Yifeng Intelligent Technology Co., Ltd. Grantee code: 2AXY5 FCC ID:

Contact Name: Ning Liu Address:

Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China. Telephone No: +86 152 2007 0621

+86-0755-33138690 Fax No:

Email: 3246968776@qq.com 10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science i. ii. Shenzhen Yifeng Intelligent Technology Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. Shenzhen Yifeng Intelligent Technology Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Date: 4.14.2023 Applicants Name: Ning Liu Title: Safety Manager 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1 C5266091_X24_Ed.1 1/1

Shenzhen Yifeng Intelligent Technology Co., Ltd. C5266091_X10_Ed.1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AXY5-M1C To Whom It May Concern, Date: 4/11/2023 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ning Liu Date: 4/11/2023 Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Yifeng Intelligent Technology Co., Ltd. Address: 10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China. Product Name: Magnetic Wireless Charger Model Number: M1C FCC Identifier: 2AXY5-M1C We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ning Liu Date: 4/11/2023 Title: Manager Signature of applicant:

1/1

CFR 47 2.911 (d)(7) Agent Designation Attestation Date: 04-09-2023 FCC ID: 2AXY5-M1C To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Shenzhen Yifeng Intelligent Technology Co., Ltd. (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information:

James He Oasis Compliance, Inc. 3313 Verdi Dr, San Jose, CA 95111 info@oasis-compliance.com Cell: 202-602-8330 Sincerely yours, Ning Liu Manager Shenzhen Yifeng Intelligent Technology Co., Ltd. Address: 10th Floor, Building 2, Chaxi, Zone B, Huafeng First Science Park, Hangcheng Street, Gushu, Baoan District, Shenzhen, China. Email: 3246968776@qq.com Phone: +86-152 2007 0621