FCC ID: 2AJJCTNS-1126 WIRELESS CONTROLLER

TNS-1126 100g 300x150mm 100x150mm 2021.09.13 KC TNS-1126 2109 A0 User Manual Product No.: TNS-1126 Version Number: A.0 1 Product Introduction:

The controller is a Bluetooth multi-function controller with N-S +

Android +PC input mode. It has beautiful appearance and excellent grip, and is a must-have for gamers. 2 Product Diagram:

Screenshot key key key Turbo key Type-C interface Home R2 key R1 key L2 key L1 key Left 3D joystick LED indicator Cross key Right 3D joystick 3 Product Features:

1. Support Bluetoothwireless connection with N-S console and Android phone platform. 2. Support wired connection of data cable with N-S console, Android phone and PC. 3. Turbo setting function, camera button, gyroscope gravity induction, motor vibration and other functions are designed. 3. When the controller is connected to the Android phone by Bluetooth and charged: the LED indicator of the currently connected channel ashes slowly, and the channel indicator is steady on when fully charged. 4. When the controller is in charging, pairing connection, auto re-connection, low power alarm state, the LED indication of pairing connection and tie-back connection is preferred. 5. Type-C USB charging input voltage: 5V DC, input current: 300mA. 8 Automatic Sleep:

1. Connect to N-S mode:

If the N-S console screen closes or turns off, the controller automatically disconnects and enters hibernation. 2. Connect to Android mode:

If the Android phone disconnect Bluetooth or turn off, the controller will automatically disconnect and go to sleep. 3. Bluetooth Connection mode:

After pressing the HOME key for 5 seconds, the Bluetooth connection is disconnected and the sleep is entered. 4. If the controller is not pressed by any key within 5 minutes, it will automatically go to sleep (including gravity sensing). 9 Low Battery Alarm 1. Low battery alarm: The LED indicator ashes quickly. 2. When the battery is low, charge the controller in time. 10 Turbo function (burst setting):

1. Press and hold any key of A, B, X, Y, L1, L2, R1, R2, and press the Turbo key to enter the Turbo (burst) function. 2. Press and hold any key of A, B, X, Y, L1, L2, R1, R2 again, and press the Turbo key to clear the Turbo function. 3. No LED indication for Turbo Function. 4 Turbo Speed Adjustments:

Press and hold the Turbo key and press the right 3D joystick upwards. The Turbo speed changes5Hz->12Hz->20Hz. Press and hold the Turbo key and press the right 3D joystick down. The Turbo speed changes20Hz->12Hz->5Hz. Note: the default turbo speed is 20Hz. 4. The built-in 400mAh 3.7V high-energy lithium battery can be used for cyclic charging. 5. The product adopts Type-C interface design, which can be charged by using original N-S adapter or standard PD protocol adapter. 6. The product has beautiful appearance and excellent grip. Available or not Remarks 34 Function Diagram:

Function Name USB wired connection Bluetooth connection Connection mode Console wake-up function Six-axis gravity sensing Yes Support N-S/PC/

Android Mode Support Yes Yes Yes Yes Yes Yes Yes Yes No A KeyB KeyX KeyY Key Key KeyL KeyR KeyZL KeyZR Key HOME KeyCross KeyTUBRO Key Screenshot key 3D joystick (left 3D joystick function) L3 key (left 3D joystick press function) R3 key (right3D joystick press function) Connection indicator Motor vibration adjustable function NFC reading function Controller upgrade Support 5 Description of Mode and Pairing Connection:

1. N-S Mode:

Press the HOME key about 2 seconds to enter the Bluetooth search mode. The LED indicator ashes by the "1-4-1" light. After successful connection, the corresponding channel indicator is steady on. The controller is in the synchronous state or is being connected with the N-S console: LED indicator ashed by "1-4-1". 2. Android Mode:

Press the HOME key about 2 seconds to enter the Bluetooth search mode. After successful connection, the LED indicator will ash by the

"1-4-1" light. Note: After the controller enters synchronous connection mode, Bluetooth will automatically sleep if it is not connected successfully within 3 minutes. If the Bluetooth connection is successful, the LED indicator is steady on (the channel light is assigned by the console). 6 Startup Instructions and Auto Reconnect Mode:

1. Press and hold the HOME key for 5 seconds to power on; Press and hold HOME key for 5 seconds to shut down. 2. Press the HOME key to wake up the controller for 2 seconds. After being woken up, it will automatically connect with the previously paired console. If the re-connection fails within 20 seconds, it will automatically sleep. 3. Other keys have no wake up function. 4. If the auto reconnects fails, you should to rematch the connection. Note: Do not touch the joysticks or other keys when starting up. This prevents the automatic calibration. If the joysticks are deviating during use, please turn off the controller and restart it. In N-S mode, you can use the Settings menu on the console and attempt Joystick Calibration again. 7 Charging Indication and Charging Characteristics:

1. When the controller is powered off and charged: The LED indicator

"1-4" will ash slowly, and the LED light will steady on when fully charged. 2. When the controller is connected to the N-S console by Bluetooth and charged: the LED indicator of the currently connected channel ashes slowly, and the LED indicator is steady on when the controller is fully charged. 5. Vibration Intensity Adjustment:

Press and hold the Turbo key and press the left 3D joystick upwards, vibration intensity changes: 0 %-> 30 %-> 70 %-> 100%. Press and hold the Turbo key and press the left 3D joystick down, vibration intensity changes: 100 %-> 70 %-> 30 %-> 0. Note: The default vibration intensity is 100%. 1. Battery capacity400mAh 2. Charging current300mA 3. Charging voltage: 5V 4. Maximum working current80mA 5. Static working current10uA 11 Screenshot Function:

15 Attention 1. N-S Mode: After you press the Screenshot key, the screen of the N-S console will be saved as a picture. 2. The Screenshot Key is unavailable on PC and Android. 1. Do not use a USB power adapter to input power more than 5.3V. 2. This product should be stored well when not in use. 3. This product cannot be used and stored in humid environment. 4. This product should be used or stored by avoiding dusts and heavy loads to guarantee its service life. 5. Please do not use the product which is soaked, crashed or broken and with electrical performance problems caused by improper use. 6. Do not use external heating equipment such as microwave ovens for drying. 7. If it is damaged, please send it to the maintenance department for disposal. Do not disassemble it by yourself. 8. Children please use this product properly under the guidance of parents. Do not be obsessed with games. 9. Because the Android system is an open platform, the design standards of different game manufacturers are not unied, which will cause that the controller cannot use for all the games. Sorry for that. 12 USB Connection Function:

1. Support USB wired connection in N-S and PC XINPUT mode. 2. The N-S mode is automatically identied when connecting to the N-S console. 3. The connection mode is XINPUT mode on a PC. 4. USB LED indicator:

N-S mode: After successful connection, the channel indicator of the N-S console automatically turns on. XINPUT mode: the LED indicator lights up after successful connection. 13 Reset Switch Function:

The reset switch is at the pinhole at the bottom of the controller. If the controller crash, you can insert a ne needle into the pinhole and press the reset switch, and the controller can be forcibly shut down. 14 Environmental conditions and electrical parameters:

Item Unit Remarks Technical indicators

-20~40

-40~70 Working temperature Storage temperature Heat-dissipating method Nature wind FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ShenZhen YuYuanXin Electronic Technology Co., LTD Agent Authorization Company: ShenZhen YuYuanXin Electronic Technology Co., LTD Address: Building 11, Tianluohu Industry Park, Guihua Industry Area, Guanguang Road, Guanlan Town, Longhua District, Shenzhen, Guangdong, China Product Name: WIRELESS CONTROLLER Model Number(s): TNS-1126, TNS-1126A,TNS-1126B,TNS-1126D,TNS-1126C Product Description: WIRELESS CONTROLLER We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022/04/15 Name:

Guangrong Tu Title:

General Manager Company: ShenZhen YuYuanXin Electronic Technology Co., LTD

ShenZhen YuYuanXin Electronic Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/04/15 Subject; Request for Confidentiality FCC ID: 2AJJCTNS-1126 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Guangrong Tu Title: General Manager

ShenZhen YuYuanXin Electronic Technology Co., LTD Model Difference 2022/04/15 EUT NAME: ShenZhen YuYuanXin Electronic Technology Co., LTD FCC ID: 2AJJCTNS-1126 MODEL : TNS-1126, TNS-1126A,TNS-1126B,TNS-1126D,TNS-1126C All the model are the same circuit and RF module, except model names. Sincerely Clients signature Clients name / title : Guangrong Tu / General Manager Contact information / address: Building 11, Tianluohu Industry Park, Guihua Industry Area, Guanguang Road, Guanlan Town, Longhua District, Shenzhen, Guangdong, China