Users Manual Product: SDIO Wireless Module Manufacturer: Silex Technology, Inc. Model: SX-SDPAC For Original Equipment Manufacturer integration only this device cannot be sold to the general public FCC ID: N6C-SDPAC IC: 4908A-SDPAC The OEM must include the following notices as required by FCC/IC on the product and in the Users Manual.
(1/5) 1 Notifications FCC IDN6C-SDPAC IC ID4908A-SDPAC NOTICE Federal Communication Interference Statement (United States only) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Re-orient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Canadian Department of Communications Industry Canada Notice (Canada only) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. FCC Rules, Part 15 / Industry Canada This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of this device. Le prsent appareil est conforme aux la partie 15 des rgles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
(2/5) Date 8/17/2016
(3/5) Date 8/17/2016 This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from a persons body. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles les radiolectriques (RF) de la FCC lignes directrices d'exposition dans le Supplment C OET65 et dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit etre install et utilis en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numro de modle s'il fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. For product available in the USA/Canada market, only channels 1-11 can be operated. Selection of other channels is not possible. If this device is to be operated in the 5.15~5.25GHz frequency range, it is restricted to indoor environments only. Antenna: Proprietary Antenna gain information: Embedded Antenna: 3.25dBi (2.4 GHz), 5.0dBi (5 GHz) Frequency Tolerance+/-20ppm WARNING The FCC / The Industry Canada regulations provide that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Manual and Product Labeling information For The OEM The end user manual shall include all required regulatory information/warning as show in this manual. And when this
(4/5) Date 8/17/2016 BT: High Speed UART QCA9377-3, (Qualcomm Atheros) Wifi: SDIO v3.0;
3.30 VDC +/- 5%
-20 to +70 degrees C 18.0 x 13.0 x 2.2 mm (L x W x D) 52-pin proprietary 802.11b/g/n: 2.412 - 2.484 GHz; 802.11a/n: 5.18 - 5.825 GHz BT: 2.402 2.480 GHz IEEE 802.11b:
IEEE 802.11g:
IEEE 802.11a:
IEEE 802.11n HT20:
IEEE 802.11n HT40:
IEEE 802.11ac VHT20:
IEEE 802.11ac VHT40:
IEEE 802.11ac VHT80:
OFDM (256QAM, 64QAM, 16QAM, QPSK, BPSK), DSSS (CCK, DQPSK, DBPSK), GFSK (1Mbps), /4 DQPSK (2Mbps), 8DQPSK (3Mbps) WEP, WPA/WPA2 (TKIP/AES-CCMP), WAPI WMM, WMM-PS, 802.11e module is installed in the host product, it will include "Contains FCC ID: N6C-SDPAC" and Contains IC: 4908A-SDPAC on the label of the host product. General Specifications Chipset:
Host Interface:
Operating Voltage:
Operating Temperature:
Dimensions:
Connector Type:
Radio Specifications:
Link Rates (1 stream):
Modulation Modes:
Hardware Encryption:
Quality of Service (QoS):
1-11 Mbps 6-54 Mbps 6-54 Mbps 6.5-65.0 Mbps 13.5-135.0 Mbps 6.5-78.0 Mbps 13.5-180.0 Mbps 29.3-390.0 Mbps
(5/5) Date 8/17/2016