FCC ID: N6C-SXPCEAC2 SX-PCEAC2

by: Silex Technology, Inc. latest update: 2023-04-14 model: SXPCEAC2

Fourteen grants have been issued under this FCC ID from 05/18/2018 to 04/14/2023 (this is one of fourteen releases in 2023 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked instructions, password defaults, troubleshooting guides, drivers, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Internal Photos Internal Photos pdf 470.78 KiB September 04 2020 / September 24 2020
various External Photos External Photos pdf 146.66 KiB April 14 2023 / October 10 2023 delayed release
various Test Report pdf April 14 2023
various Attestation Statements pdf April 14 2023
various Attestation Statements pdf April 14 2023
various Cover Letter(s) pdf April 14 2023
various Cover Letter(s) pdf April 14 2023
various Cover Letter(s) pdf April 14 2023
various Test Report Test Report pdf 1.80 MiB April 14 2023
various Test Setup Photos Test Setup Photos pdf 402.58 KiB April 14 2023 / October 10 2023 delayed release
various Attestation Statements pdf April 14 2023
various Agent Authorization Letter Cover Letter(s) pdf 165.53 KiB April 13 2023
various USA Agent for Service of Process Attestation Statements pdf 783.14 KiB April 13 2023
various Class II permissive change letter Cover Letter(s) pdf 30.45 KiB September 30 2021 / October 12 2021
various Declaration of authorization Cover Letter(s) pdf 266.22 KiB September 30 2021 / October 12 2021
various RF Exposure Info RF Exposure Info pdf 274.41 KiB September 30 2021 / October 12 2021
various class II permissive letter Cover Letter(s) pdf 32.11 KiB September 04 2020 / September 24 2020
various Test Report pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Internal Photos Internal Photos pdf 470.78 KiB September 04 2020 / September 24 2020
various External Photos External Photos pdf 146.66 KiB April 14 2023 / October 10 2023 delayed release
various Test Report pdf April 14 2023
various Attestation Statements pdf April 14 2023
various Attestation Statements pdf April 14 2023
various Cover Letter(s) pdf April 14 2023
various Cover Letter(s) pdf April 14 2023
various Cover Letter(s) pdf April 14 2023
various Test Report Test Report pdf 1.80 MiB April 14 2023
various Test Setup Photos Test Setup Photos pdf 402.58 KiB April 14 2023 / October 10 2023 delayed release
various Attestation Statements pdf April 14 2023
various Agent Authorization Letter Cover Letter(s) pdf 165.53 KiB April 13 2023
various USA Agent for Service of Process Attestation Statements pdf 783.14 KiB April 13 2023
various Class II permissive change letter Cover Letter(s) pdf 30.45 KiB September 30 2021 / October 12 2021
various Declaration of authorization Cover Letter(s) pdf 266.22 KiB September 30 2021 / October 12 2021
various RF Exposure Info RF Exposure Info pdf 274.41 KiB September 30 2021 / October 12 2021
various class II permissive letter Cover Letter(s) pdf 32.11 KiB September 04 2020 / September 24 2020

frequency equipment class purpose
1 2023-04-14 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 2023-04-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2422 ~ 2452 DTS - Digital Transmission System
4 2021-10-12 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
5 2020-09-24 2422 ~ 2452 DTS - Digital Transmission System
6 2019-04-24 2422 ~ 2452 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
7 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
8 2018-07-20 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2422 ~ 2452 DTS - Digital Transmission System
11 2018-05-18 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2422 ~ 2452 DTS - Digital Transmission System
14 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
various Effective 2023-04-14
various 2023-04-13
various 2021-10-12
various 2020-09-24
various 2019-04-24
various 2018-07-20
various 2018-05-18
various Applicant's complete, legal business name Silex Technology, Inc.
various FCC Registration Number (FRN) 0013616305
various Physical Address 2-3-1 Hikaridai, Seika-cho, Soraku-gun
various 2-3-1 Hikaridai,Seika-cho Sourakugun
various Kyoto, N/A 619-0237
various Kyoto, N/A
various Japan
app s TCB Information
various TCB Application Email Address c******@vista-compliance.com
various c******@telefication.com
various t******@siemic.com
various L******@ul.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code N6C
various Equipment Product Code SXPCEAC2
app s Person at the applicant's address to receive grant or for contact
various Name Y**** N****
various T******** K******
various Title General Manager
various Manager
various Telephone Number 81 77********
various Fax Number 81 77********
various E-mail n******@silex.jp
various k******@silex.jp
app s Technical Contact
various Firm Name SGS Taiwan Ltd.
various Name J****** C********
various W******** C******
various Physical Address 134, Wu Kung Road, WuKu Industrial Zone
various No. 134, Wu Kung Road, Wuku District
various Taiwan
various Telephone Number +8862******** Extension:
various 88622******** Extension:
various 88622******** Extension:
various Fax Number 88622********
various E-mail j******@sgs.com
various w******@sgs.com
app s Non Technical Contact
various Firm Name SGS Taiwan Ltd.
various Name J**** C****
various W**** C******
various Physical Address 134, Wu Kung Road, WuKu Industrial Zone
various No. 134, Wu Kung Road, Wuku District
various Taiwan
various Telephone Number +8862******** Extension:
various 88622******** Extension:
various 88622******** Extension:
various 88622********
various Fax Number 88622********
various E-mail j******@sgs.com
various w******@sgs.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/10/2023
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)SX-PCEAC2
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousClass II Permissive Change
variousChange in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive change to add new antenna as documented (Taoglass GW.05.0153 monopole antenna). Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive change : The major change is to decrease output power of WLAN 5GHz by SW. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive change : Only firmware is modified to decrease power output of 802.11b modes. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousC2PC to add Taoglass MA350.A.CG.003 Antenna (Screw Mount Omni-Directional Antenna). Antenna gain: 2.4GHz MIMO Ant1: 3.5dBi Ant2: 5.5dBi / 5GHz MIMO Ant1: 1.6dBi Ant2: 2.3dBi. Bluetooth is disabled Original Grant Comment: Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousC2PC to add Taoglass MA350.A.CG.003 Antenna (Screw Mount Omni-Directional Antenna). Antenna gain: 2.4GHz MIMO Ant1: 3.5dBi Ant2: 5.5dBi / 5GHz MIMO Ant1: 1.6dBi Ant2: 2.3dBi Original Grant Comment: Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive change : The major change is to add antennas with new types. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive change : The major change is to add antennas with new type. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive change : The major change is to add antennas with new types. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousModular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousModular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousModular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Vista Laboratories, Inc.
various SGS Taiwan Ltd. Electromagnetic Compatibility Lab
various Bureau Veritas Consumer Products Services, Inc.
various SGS Taiwan Ltd. Electronics & Communication Lab
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Name D******** Z********
various T******** W******
various L****** B****
various R**** W******
various K****** L****
various Telephone Number +1 (9********
various 88622******** Extension:
various 408-5********
various +886-******** Extension:
various +886-******** Extension:
various Fax Number +8863********
various 408 5********
various +886-********
various +886-********
various E-mail i******@vista-compliance.com
various T******@sgs.com
various l******@siemic.com
various r******@sgs.com
various k******@tw.bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.08
1 2 15E CC MO 5260 5320 0.0749
1 3 15E CC MO 5500 5700 0.0501
1 4 15E CC MO 5745 5825 0.0674
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.002
3 2 15C CC MO 2412 2462 0.485
3 3 15C CC MO 2422 2452 0.205
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.08
4 2 15E CC MO 5260 5320 0.0749
4 3 15E CC MO 5500 5720 0.0501
4 4 15E CC MO 5745 5825 0.0674
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.002
5 2 15C CC MO 2412 2462 0.485
5 3 15C CC MO 2422 2452 0.205
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC MO 2412 2462 0.485
6 2 15C CC MO 2422 2452 0.205
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.08
7 2 15E CC MO 5260 5320 0.0749
7 3 15E CC MO 5500 5720 0.0501
7 4 15E CC MO 5745 5825 0.0674
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.08
8 2 15E CC MO 5260 5320 0.0749
8 3 15E CC MO 5500 5720 0.0501
8 4 15E CC MO 5745 5825 0.0674
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.002
10 2 15C CC MO 2412 2462 0.485
10 3 15C CC MO 2422 2452 0.205
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E 38 CC MO 5180 5240 0.08
11 2 15E 38 CC MO 5260 5320 0.0749
11 3 15E 38 CC MO 5500 5720 0.0501
11 4 15E 38 CC MO 5745 5825 0.0674
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC MO 2402 2480 0.002
13 2 15C CC MO 2412 2462 0.485
13 3 15C CC MO 2422 2452 0.205
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15B CC

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC