Product External Specifications For Silex 802.11b/g/n Draft 2.0 USB module
(Atheros AR9271) Model Number: SX-USBGN Revision: 1.0 Alpha Networks Proprietary and Confidential Information 1 Revision History Rev. Date 1.0 2012/08/23 Author Amanda Wang Reason for Changes Initial Alpha Networks Proprietary and Confidential Information 2 Contents 1.0 SCOPE ............................................................................................................................................................................... 4 1.1 DOCUMENT ...................................................................................................................................................................... 4 1.2 PRODUCT FEATURES ........................................................................................................................................................ 4 2.0 REQUIREMENTS ........................................................................................................................................................... 5 2.1 FUNCTIONAL BLOCK DIAGRAM ....................................................................................................................................... 5 2.2 GENERAL REQUIREMENTS ............................................................................................................................................... 5 2.2.1 IEEE 802.11b Section .............................................................................................................................................. 5 2.2.2 IEEE 802.11g Section .............................................................................................................................................. 5 2.2.3 IEEE 802.11n draft 2.0 Section ............................................................................................................................... 6 2.2.4 General Section ....................................................................................................................................................... 7 2.3 SOFTWARE REQUIREMENTS ............................................................................................................................................. 7 2.3.1 Information .............................................................................................................................................................. 8 2.3.2 Configuration .......................................................................................................................................................... 8 2.3.3 Encryption ............................................................................................................................................................... 8 2.4 MECHANICAL REQUIREMENTS......................................................................................................................................... 8 2.5 COMPATIBILITY REQUIREMENTS ..................................................................................................................................... 8 2.6 REQUIREMENTS OF RELIABILITY, MAINTAINABILITY AND QUALITY ............................................................................... 9 2.7 ENVIRONMENTAL REQUIREMENTS .................................................................................................................................. 9 Alpha Networks Proprietary and Confidential Information 3 1.0 Scope 1.1 Document This document is to specify the product requirements for 802.11 b/g/n USB Module. This Card is based on Atheros chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4~2.5GHz, and it can be used to provide up to 54Mbps for 802.11g, 11Mbps for 802.11b and 150Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Module offers absolute interoperability with different vendors 802.11g, 802.11b and 802.11n Access Points through the wireless LAN. Compatible with IEEE 802.11n draft 2.0 standard to provide wireless 150Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate Operation at 2.4 ~ 2.5GHz frequency band to meet worldwide regulations Dynamic date rate scaling at 6, 9, 12, 18, 24, 36, 48, 54 for IEEE 802.11g. Dynamic date rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b 1.2 Product Features
Maximum reliability, throughput and connectivity with automatic data rate switching
Support wireless data encryption with 64/128-bit WEP for security Support infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication Support WEP, 802.1x, WPA and WPA2 enhanced security Friendly user configuration and utilities Drivers support Windows 2K, XP 32/64-bit, Vista 32/ 64-bit High speed USB 2.0 interface RoHS compliant Integrated antenna Alpha Networks Proprietary and Confidential Information 4 2.0 Requirements The following sections identify the detailed requirements of the 802.11n USB2.0 Module. 2.1 Functional Block Diagram GPIOs USB 2.0 SPI Control MAC Memory Control USB DMA CPU M e m o r y Base band DAC ADC Combi RX ner Radio TX Radio RF Switch Frequency Synthesizers Bias / Control AR9271 40 MHz XTAL Serial EEPROM 2.2 General Requirements 2.2.1 IEEE 802.11b Section
2.2.1.1 2.2.1.2 2.2.1.3 2.2.1.4 2.2.1.5 2.2.1.6 2.2.1.7 2.2.1.8 Feature Standard Radio and Modulation Schemes Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector Detailed Description
IEEE 802.11b DQPSK, DBPSK, DSSS, and CCK
2400 ~ 2497MHz ISM band 11 channels for United States 13 channels for Europe Countries 14 channels for Japan 11, 5.5, 2, and 1Mbps CSMA/CA with ACK Typical RF Output Power at each RF chain, Data Rate and at room Temp. 25degree C 17dBm( 2dB) at 1,2,5.5,11Mbps Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
8%
90dBm at 1Mbps 88dBm at 2Mbps 86dBm at 5.5Mbps 84dBm for 11Mbps 2.2.2 IEEE 802.11g Section
2.2.2.1 Feature Standard Detailed Description
IEEE 802.11g Alpha Networks Proprietary and Confidential Information 5
2.2.2.2 2.2.2.3 2.2.2.4 2.2.2.5 2.2.2.6 2.2.2.7 Feature Radio and Modulation Type Operating Frequency Channel Numbers Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector 2.2.2.8 Receiver Sensitivity at Antenna Connector 2.2.3 IEEE 802.11n draft 2.0 Section
2.2.3.1 2.2.3.2 Feature Standard Radio and Modulation Type Operating Frequency 2.2.3.3 2.2.3.4 Data Rate (Mbps) 2.2.3.5 2.2.3.6 Media Access Protocol Transmitter Output Power at Antenna Connector Detailed Description
BPSK, QPSK, 16QAM, 64QAM with OFDM
2400 ~ 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries 13 channels for Japan 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK Typical RF Output Power (tolerance +-2dB) at each RF chain, Data Rate and at room Temp. 25degree C 17 2dBm at 6~24 Mbps 17 2dBm at 36 Mbps 16 2dBm at 48 Mbps 15 2dBm at 54 Mbps Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
10%
87dBm at 6Mbps 87dBm at 9Mbps 84dBm at 12Mbps 82dBm at 18Mbps 79dBm at 24Mbps 75dBm at 36Mbps 71dBm at 48Mbps 70dBm at 54Mbps Detailed Description
IEEE 802.11n BPSK, QPSK, 16QAM, 64QAM with OFDM 2400 ~ 2483.5MHz ISM band Channel Frequency for HT20: 2412~2472MHz Channel Frequency for HT40: 2422~2462MHz TX/RX: MCS0 ~ MCS7 GI=800ns 20MHz 6.5 13 19.5 26 39 52 58.5 65 CSMA/CA with ACK 40MHz 13.5 27 40.5 54 81 108 121.5 135 GI=400ns 20MHz 7.2 14.4 21.7 28.9 43.3 57.8 65.0 72.2 40MHz 15 30 45 60 90 120 135 150 Typical RF Output Power(tolerance +-2dB) at each RF chain, Data Rate and at room Temp. 25degree C
MCS 0 1 2 3 4 5 6 7
HT20 Alpha Networks Proprietary and Confidential Information 6 15 2dBm at MCS0~4 15 2dBm at MCS5 15 2dBm at MCS6 14 2dBm at MCS7 Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate =
10%
Feature 2.2.3.7 Receiver Sensitivity 17 2dBm at MCS0~4 17 2dBm at MCS5 16 2dBm at MCS6 15 2dBm at MCS7 Detailed Description
HT40
HT20
HT40
86dBm at MCS0 83dBm at MCS1 82dBm at MCS2 77dBm at MCS3 74dBm at MCS4 69dBm at MCS5 68dBm at MCS6 67dBm at MCS7 83dBm at MCS0 81dBm at MCS1 78dBm at MCS2 74dBm at MCS3 71dBm at MCS4 66dBm at MCS5 65dBm at MCS6 64dBm at MCS7 2.2.4 General Section
2.2.4.1 2.2.4.2 2.2.4.3 2.2.4.4 Feature Antenna Type Operating Voltage Current Consumption USB Detailed Description
Integrated antenna
5VDC +/- 5%
400mA at continuous transmit mode
200mA at receive mode w/o receiving packet
High Speed USB2.0 Interface 2.3 Software Requirements The Configuration Software supports Microsoft Windows 2000, XP 32/64-bit and Vista 32/64-bit. This configuration software includes the following functions:
Information Information allows you to monitor network status.
Configuration
Configuration allows you to configure parameters for wireless networking. Encryption Encryption provides WEP, WPA, WPA2, and 802.1X security control Alpha Networks Proprietary and Confidential Information 7
Diagnosis Diagnosis allows you to display all channel status and search neighboring access points 2.3.1 Information
2.3.1.1 Feature General Information 2.3.1.2 Current Link Information 2.3.1.3 Site survey 2.3.2 Configuration
2.3.2.1 Feature ESS ID 2.3.2.2 Network Type 2.3.2.3 2.3.2.4
Transmission Speed Roaming
Detailed Description
General Information shows the name of Wireless Adapter, Adapter MAC Address, Regulatory Domain, Firmware Version, and Utility Version. Current Link Information shows the Current Setting ESSID, Channel Number, Associated BSSID, Network Type (infrastructure or Ad-hoc network), WEP Status (enable or disable), Link Status (Connect or Dis-connect), 802.11g Transmit Speed (6, 9, 12, 18, 24, 36, 48, 54Mbps), 802.11b Transmit Speed (1, 2, 5.5, 11Mbps), Signal Strength, and Link Quality.
To search the neighboring access points and display the information of all access points. Detailed Description
Input an SSID number if the roaming feature is enabled Supports for ASCII printable characters. Ad-hoc Mode and 802.11 Ad-hoc Mode for network configurations that do not have any access points Infrastructure Mode for network configurations with access points This indicates the communication rates. Select appropriate transmission speed to match your wireless LAN settings Support Automatic or Manual Rescan to associate with access point. 2.3.3 Encryption
2.3.3.1 Feature Encryption 2.3.3.2 WEP Management 2.3.3.3 2.3.3.4 802.1x WPA/WPA2 RC4 encryption algorithm Support 64/128 bit WEP encryption Support open system and shared key authentication Four WEP keys can be selected STA with WEP off will never associate any AP with WEP enabled Detailed Description
WEP Key Format: Option for Hex format
Support EAP-TLS, EAP-TTLS, and EAP-PEAP Support WPA/WPA2-PSK and WPA/WPA2-EAP Support Cipher Mode AES and TKIP 2.4 Mechanical Requirements
2.4.1 2.4.2 2.4.3 Feature Length Width Height Detailed Description
57.5mm(PCBA) 22.6mm(PCBA) 5.8mm(PCBA) 2.5 Compatibility Requirements This device passes the following compatibility requirements.
2.5.1 Feature Wi-Fi Detailed Description
Meet Wi-Fi certification for IEEE 802.11b/g product Alpha Networks Proprietary and Confidential Information 8
2.5.2 2.5.3 Feature WHQL Physical Layer and Functionality Detailed Description
Meet applicable WHQL certification requirements
Meet Alpha Networks Engineering Test Plan and Test Report 2.6 Requirements of Reliability, Maintainability and Quality
2.7.1 2.7.2 2.7.3 Detailed Description
Mean Time Between Failure > 30,000 hours
Feature MTBF Maintainability Quality There is no scheduled preventive maintenance required The product quality is followed-up by Alpha Networks factory quality control system 2.7 Environmental Requirements
Feature Detailed Description 2.7.1 2.7.2 2.7.3 2.7.4 Operating Temperature Conditions Non-Operating Temperature Conditions Operating Humidity conditions Non-Operating Humidity Conditions
The product is capable of continuous reliable operation when operating in ambient temperature of 0 to +45 .
Neither subassemblies is damaged nor the operational performance is degraded when restored to the operating temperature after exposing to storage temperature in the range of 20 to +75 . The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% non-condensing.
The product is not damaged nor the performance is degraded after exposure to relative humidity ranging from 5% to 95% non-condensing Alpha Networks Proprietary and Confidential Information 9 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Increase the separation between the equipment and receiver.
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2)The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-
location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
Contains FCC ID: N6C-USBGN. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to Alpha Networks Proprietary and Confidential Information 10 install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et
(2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
Contains IC: 4908A-USBGN. Plaque signaltique du produit final Alpha Networks Proprietary and Confidential Information 11 Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 4908A-USBGN". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Alpha Networks Proprietary and Confidential Information 12