FCC ID: N6C-SDMAN SDIO Wireless Module

User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification

(installation procedure). This radio transmitter SX-SDMAN identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type Antenna Gain 2.4GHz W52/53/58 Embedded Antenna 2.0dBi 2.5dBi For Bluetooth and Wireless LAN For Mobile use only Sleeve antenna 1.0dBi 1.1dBi For Wireless LAN Mini-Nanoblade antenna(*) 2.5dBi 4.8dBi Stand Alone antenna(*) 3.0dBi 4.6dBi For Wireless LAN For Mobile use only For Wireless LAN For Mobile use only Le prsent metteur radio SX-SDMAN a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Type dantenne Gain 2.4GHz W52/53/58 Embedded Antenna 2.0dBi 2.5dBi For Bluetooth and Wireless LAN For Mobile use only Sleeve antenna 1.0dBi 1.1dBi For Wireless LAN Mini-Nanoblade antenna(*) 2.5dBi 4.8dBi Stand Alone antenna(*) 3.0dBi 4.6dBi For Wireless LAN For Mobile use only For Wireless LAN For Mobile use only

(*)It has not been confirmed to meet new rules of FCC 14-30 and RSS-247 in a state of attaching these antennas. Therefore, the testing and the class 2 permissive change application are required before using these antennas.

[for FCC]

Contains Transmitter Module FCC ID: N6C-SDMAN or Contains FCC ID: N6C-SDMAN This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual.

[for IC]

Contains Transmitter Module IC: 4908B-SDMAN or Contains IC: 4908B-SDMAN The following statements must be described on the user manual of the host device of this module;

[for FCC]

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For Mobile use This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. For Portable use The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This product has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.

[for IC]

This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 5.15-5.35GHz band is restricted to indoor operations only. La bande 5 150-5 350 MHz est restreints une utilisation lintrieur. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. For Mobile use This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps. For Portable use The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This product has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency

(RF) Exposure rules. Les connaissances scientifiques dont nous disposons nont mis en vidence aucun problme de sant associ lusage des appareils sans fil faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil faible puissance sont entirement sans danger. Les appareils sans fil faible puissance le spectre des mettent une nergie radiolectrique (RF) trs faible dans micro-ondes lorsquils sont utiliss. Alors quune dose leve de RF peut avoir des effets sur la sant (en chauffant les tissus), lexposition de faibles RF qui ne produisent pas de chaleur na pas de mauvais effets connus sur la sant. De nombreuses tudes ont t menes sur les expositions aux RF faibles et nont dcouvert aucun effet biologique. Certaines tudes ont suggr quil pouvait y avoir certains effets biologiques, mais ces rsultats nont pas t confirms par des recherches supplmentaires. Ce produit a t test et jug conforme aux limites d exposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC.

User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification

(installation procedure). This radio transmitter SX-SDMAN identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type Antenna Gain 2.4GHz W52/53/58 Embedded Antenna 2.0dBi 2.5dBi For Bluetooth and Wireless LAN Sleeve antenna 1.0dBi 1.1dBi Mini-Nanoblade antenna(*) 2.5dBi 4.8dBi Stand Alone antenna(*) 3.0dBi 4.6dBi For Wireless LAN For Mobile use only For Wireless LAN For Mobile use only For Wireless LAN For Mobile use only Le prsent metteur radio SX-SDMAN a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Type dantenne Gain 2.4GHz W52/53/58 Embedded Antenna 2.0dBi 2.5dBi For Bluetooth and Wireless LAN Sleeve antenna 1.0dBi 1.1dBi Mini-Nanoblade antenna(*) 2.5dBi 4.8dBi Stand Alone antenna(*) 3.0dBi 4.6dBi For Wireless LAN For Mobile use only For Wireless LAN For Mobile use only For Wireless LAN For Mobile use only

(*)It has not been confirmed to meet new rules of FCC 14-30 and RSS-247 in a state of attaching these antennas. Therefore, the additional testing and the class 2 permissive change application are required before using these antennas.

[for FCC]

Contains Transmitter Module FCC ID: N6C-SDMAN or Contains FCC ID: N6C-SDMAN This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual.

[for IC]

Contains Transmitter Module IC: 4908B-SDMAN or Contains IC: 4908B-SDMAN The following statements must be described on the user manual of the host device of this module;

[for FCC]

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For Mobile use This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. For Portable use The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This product has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.

[for IC]

This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 5.15-5.35GHz band is restricted to indoor operations only. La bande 5 150-5 350 MHz est restreints une utilisation lintrieur. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. For Mobile use This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps. For Portable use The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This product has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency

(RF) Exposure rules. Les connaissances scientifiques dont nous disposons nont mis en vidence aucun problme de sant associ lusage des appareils sans fil faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil faible puissance sont entirement sans danger. Les appareils sans fil faible puissance le spectre des mettent une nergie radiolectrique (RF) trs faible dans micro-ondes lorsquils sont utiliss. Alors quune dose leve de RF peut avoir des effets sur la sant (en chauffant les tissus), lexposition de faibles RF qui ne produisent pas de chaleur na pas de mauvais effets connus sur la sant. De nombreuses tudes ont t menes sur les expositions aux RF faibles et nont dcouvert aucun effet biologique. Certaines tudes ont suggr quil pouvait y avoir certains effets biologiques, mais ces rsultats nont pas t confirms par des recherches supplmentaires. Ce produit a t test et jug conforme aux limites d exposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC.

EUT - Top View EUT Bottom View Embedded Antenna Top View Embedded Antenna Bottom View

Top View Bottom View Embedded antenna: Ethertronics -Top View Embedded antenna: Ethertronics -Bottom View Sleeve antenna: Sansei -Top View Sleeve antenna: Sansei -Port View

Antenna Photo Mini-Nanoblade antenna Antenna Photo Stand Alone antenna[Model:47950-0001]

RP2D Label RP2D Label Location RP4D Label RP4D Label Location

silex technology Date: November 14, 2018 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID :N6C-SDMAN Applicant: Silex Technology, Inc. SOM Omi NCN mee Neon Please be advised we authorize Yoshihisa Maeda of Consumer Technology Division, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Sincerely, Toshiro Kometani Silex Technology, Inc. JRC MOAI eVA Lae)

silex Z fot technology December 12, 2018 Request for Class IIT Permissive Change Antenna Type 5GHz Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 FCCID : N6C-SDMAN Applicant : Silex Technology, Inc. SOMA ton wIB\ ENA @eneo ete This is to request a Class II permissive change for FCC ID: N6C-SDMAN, originally granted on 08/20/2012 and all its permissive changes. We changed the following points from the original model.

- Addition of 5600-5640 MHz (11a/ 11n-20) and 5590-5630 MHz (11n-40) to Wireless LAN W56 bands.

* The following antennas granted on 03/26/2014 are also used for 5GHz Wireless LAN W56 (5500-

5700 MHz). Mini-Nanoblade antenna: Laird Technolo jes Mint-Nanoblade 4.8dBi Stand Alone antenna: Molex Ae Sem OO OR 4.6dBi Please refer to attached Specification for details of these modifications. Meanwhile we submit the following documents related to this change. There is no change before and after change except for these documents. aU comme) as RF Exsosure External Photo Internal Photo User Manual Label Drawin~ Location Block Diagram Specification Schematic Dia am Parts List i

a a i a L]

This time, we performed the testing and confirmed that this product still meets the minimum requirements of the applicable rules of FCC. Please refer to the test report submitted with this application. Thank you for your attention to this matter. Toshiro Kometani Silex Technology, Inc. i

Silex technology Date: November 14, 2018 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID :N6C-SDMAN Applicant: Silex Technology, Inc. SRoM Kerem imreth mee eouer This product is mounted inside of the end product by professional installers OEM. They use this module with changing the power and operating frequency setting by the software of end product within the scope of this application because the operating frequency band is limited by the used antenna. End user cannot change this setting. Thank you for your attention to this matter. STE Toshiro Kometani Silex Technology, Inc. Declaration Letter of professional installation

Silex November 14, 2018 Request for Modular Transmitter Approval FCCID :N6C-SDMAN Applicant: Silex Technology, Inc. This transmitter, model: SX-SDMAN is designed by us. It complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below:

Modular Approval Checklist:

Modular anproval rec uirement

(1) Have its own RF shielding.

(2) Have buffered modulation/data inputs.

(3) Have its own power supply regulation.

(4) Comply with the antenna and transmission system requirements of 15.203, 15.204(b and 15.204(c .

(5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testin shall be unmodified and commerciall available.

(6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.

(7) Comply with any specific rules or operating requirements that [Xx]

ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to ex lainan suchre uirements.

\Z

(8) Comply with any applicable RF exposure requirements in its [X final configuration: The modular transmitter complies with FCC radiation ex sure re uirement. Toshiro Kometani Silex Technology, Inc. technology

silex technology UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID :N6C-SDMAN Applicant: Silex Technology, Inc. stom onmimt hme neon Please be advised that the following information is to be held confidential based on the FCC rules 0.457 and 0.459:

Theory of Operation The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Toshiro Kometani Silex Technology, Inc. Date: November 14, 2018 Request for Confidentiality

Silex Technology, Inc. Si lex 2-3-1 Hikaridai, Seika-cho Sourakugun, Kyoto 619-0237, Japan ieonrnekagy Authorization Letter TO:

Federal Communications Commission Authorization and Evaluation Division FCC ID: N6C-SDMAN IC: 4908B-SDMAN M/N: SIDO Wireless Module We granted single modular approval in mobile configuration. Now the company Honeywell International Inc use this wireless module (FCC ID: NSC-SDMAN) in their portable device (Product Name: Thermal Printer, M/N: RP2D, RP4D), therefore they should perform SAR testing with the host device. Meanwhile we authorized to Honeywell International Inc (Compliance Leader: Lucas Wang) to deal with this action (Class Il Permissive Change based on wireless module FCC ID: N6C-SDMAN). Sincerely, Date: August 15, 2017 Name: Toshiro Kometani Title: General Manager Signature: 7 Conran

Request for Class II Permissive Change FCC ID: N6C-SDMAN Data: October 25, 2017 TO: Federal Communication Commission This is to request a Class II permissive change for FCC ID: N6C-SDMAN, DTS/NII originally granted on 11/14/2014, DSS originally granted on 08/20/2012. This time, the module is used in the portable host device therefore we should perform SAR testing with the host device. There is no hardware change for the module that using one PCB antenna (Antenna type was same as before, antenna gain was more than original report). Besides the SAR testing, the radiated spurious emission and band edge also have be assessed again. The modules turn up procedure was same as before. Sincerely, Name: Lucas Wang Title: Compliance Leader Signature:

Honeywell International Inc.Honeywell Sensing & Productivity Solutions

Confidentiality Letter Date: August 15, 2017 Federal Communications Commission Authorization and Evaluation Division FCC ID: N6C-SDMAN Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

1. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Name: Lucas Wang Title: Compliance Leader Signature:

Declaration of Authorization We Name: Silex Technology, Inc. Address: 2-3-1 Hikaridai, Seika-cho Sourakugun, Kyoto 619-0237, Japan Declare that:

Name Representative of agent: Marlin Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

Product description: SDIO Wireless Module Type designation: SX-SDMAN MRT Technology (Suzhou) Co., Ltd D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, Suzhou China August 15, 2017 Trademark:

on our behalf. Date:

Sign by:

Print Name: Lucas Wang Title: Compliance Leader Honeywell International Inc. Honeywell Sensing & Productivity Solutions

Module Approval Cover Letter Date: August 15, 2017 FCC ID: N6C-SDMAN I: The module has its own RF shielding and kindly refer exhibition External Photo. II: The module must have buffered modulation/data inputs and kindly refer the detailed description on the block diagram and schematic diagram. III: The module must have its own power supply regulation and kindly refer the user manual which detailed the power supply regulation. IV: The module has its own antenna. Kindly refer to the exhibition External Photo. V: The module is tested in a stand-alone configuration and kindly refer exhibition Test Setup Photo. VI: The module labeled with its permanently affixed FCC ID. VII: The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee;

VIII: The module must comply with RF exposure requirements and kindly refer RF Exposure report. Sincerely, __________________ Name: Lucas Wang Position: Compliance Leader Honeywell International Inc Honeywell Sensing & Productivity Solutions

Declaration Letter Date: August 15, 2017 FCC ID: N6C-SDMAN Dear Sir, Host Applicant: Honeywell International Inc Honeywell Sensing & Productivity Solutions Host Address: 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Host Product Name: Thermal Printer Host Model No.: RP2D, RP4D Model Difference: RP2D and RP4D have the same hardware besides the peripheral plastic structure. RP2D was defined as 2 inches size, but RP4D was defined as 4 inches size. Thank you!

Sincerely, Name: Lucas Wang Title: Compliance Leader Signature:

Request for Class II Permissive Change FCC ID: N6C-SDMAN Data: August 15, 2017 TO: Federal Communication Commission This is to request a Class II permissive change for FCC ID: N6C-SDMAN, DTS/NII originally granted on 11/14/2014, DSS originally granted on 08/20/2012. This time, the module is used in the portable host device therefore we should perform SAR testing with the host device. There is no hardware change for the module that using one PCB antenna (Antenna type was same as before, antenna gain was less than original report). The modules turn up procedure was same as before. Sincerely, Name: Lucas Wang Title: Compliance Leader Signature:

silex technology www. silex. jp Letter of Authorization Date: September 7, 2016 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCCID :N6C-SDMAN Applicant: Silex Technology, Inc. To whom it may concern:

Please be advised we authorize Yoshihisa Maeda of Consumer Technology Division, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Sincerely,

age f. Lal sirkKionvlan Toshiro Kometani Silex Technology, Inc.

Request for Class IJ Permissive Change Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID : N6C-SDMAN Applicant: Silex Technology, Inc. To Whom It May Concern:

silex technology www. silex. jp September 21, 2016 This is to request a Class II permissive change for FCC ID: N6C-SDMAN, originally granted on 08/20/2012 and all its permissive changes. We performed the SAR testing with specific host WIRELESS TEACH PENDANT

(FD WLTPDSJN-2) and granted on 09/17/2015. At that time, Bluetooth function (BDR/EDR/LE) and Wireless LAN W56 (5500-5700MHz) were not used in the host device by controlled software setting. This time we performed the additional SAR testing to add the band of Wireless LAN W56 (5500-5700MHz). Please refer to attached Test Report and Theory of operation for details of these modifications. Meanwhile we submit the following documents related to this change. There is no change before and after change except for these documents. bx] | Test Report External Photo

[|_| Internal Photo

[ | | User Manual

| [| | Label drawing/ location

[| | Block Diagram X|_| Theory of operation L_| | Schematic Diagram

| F | | Parts List Thank you for your attention to this matter. Sincerely,

/ , ZAM begvedow LOELELUE Keo Toshiro Kometani Silex Technology, Inc.

silex technology www. silex. jp Declaration of professional installation Date: September 7, 2016 FCCID :N6C-SDMAN Applicant: Silex Technology, Inc. To whom it may concern:

This product is mounted inside of the end product by professional installers OEM. They use this module with changing the power and operating frequency setting by the software of end product within the scope of this application because the operating frequency band is limited by the used antenna. End user cannot change this setting. Thank you for your attention to this matter. Sincerely,

Lb kerribes |

Toshiro Kometani Silex Technology, Inc.

silex technology www. silex. jp Request for Confidentiality Date: September 7, 2016 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCCID :N6C-SDMAN Applicant: Silex Technology, Inc. To whom it may concern:

Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459:

Theory of Operation The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ee vy f+, VLE) TULL creo Toshiro Kometani Senior Manager Silex Technology, Inc.

lex S technology www. silex. jp Letter of Authorization Date: March 12, 2016 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID :N6C-SDMAN Applicant: Silex Technology, Inc. To whom it may concern:

Please be advised we authorize Yoshihisa Maeda of Consumer Technology Division, UL Japan, Inc. to act on our behalf, until otherwise notified, for applications submitted for Federal Communication Commission Radio equipment applications submitted to UL Japan, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. The application for the subject equipment has not been submitted to another TCB for certification. Thank you for your attention to this matter. Sincerely, Dhiathsaialer s st Korn ban Toshiro Kometani Senior Manager Silex Technology, Inc.

silex technology www. silex. jp Request for Class II Permissive Change March 12, 2016 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 FCCID : N6C-SDMAN Applicant : Silex Technology, Inc. To Whom It May Concern:

This is to request a Class II permissive change for FCC ID: N6C-SDMAN, originally granted on 08/20/2012, 03/26/2014, 11/14/2014, 09/17/2015. We changed the following points from the original model based on FCC 14-30 released on April 1, 2014.

* Delete the frequency of W58 (5745-5825MHz) for WLAN from DTS

* Add the frequency of W58 (5745-5825MHz) for WLAN to NII Target Antennas Antenna Type Model Mini-Nanoblade antenna Mini-Nanoblade 2.5dBi 4.8dBi

: Laird Technologies Stand Alpne.antenna | 49966-0001 3.0dBi 4.60Bi

: Molex

*Bluetooth function (BDR/ EDR/ LE) and Wireless LAN W56 (5500-5580 and 5660-5700MHz) are not used by controlled by software. Antenna Gain 2.4GHz W52/53/58 Please refer to attached Test Report for details of these modifications. Meanwhile we submit the following documents related to this change. There is no change before and after change except for these documents. x] | Test Report

[_] | External Photo Internal Photo User Manual Label drawing/ location Block Diagram Specification Schematic Diagram Parts List This time, we performed the testing and confirmed that this product still meets the minimum requirements of the applicable rules of FCC. Please refer to the test report submitted with this application. This module is a Client Device without Radar detection capability, follows the channel selection by a Master device, and its DFS function was not changed from the previous certified model. silex technology www. silex. jp KDB 905462 D03 Client Without DFS New Rules vO1r01 was satisfied with original test report

[321E0154-HO-01-D-R1 issued by UL Japan, SL13032601-SLX003 (FCC_15.407)_DFS Rev1.0 issued by SIEMIC, INC.], so additional test was not performed. Therefore, this module comply the new U-NII rules on KDB926956 DO! U-NII Transition Plan v0 1104. Thank you for your attention to this matter. Sincerely, Auk LOB MW RV, Toshiro Kometani Senior Manager Silex Technology, Inc.

silex technology www. silex. jp Date: March 12, 2016 Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID : N6C-SDMAN Applicant : Silex Technology, Inc. To whom it may concern:

We had granted the following antennas with the new rules for U-NII devices adopted under Docket No. 13-49 on 11/14/2014. Antenna Gain Antenna Type Model

| YP | 2.4GHz W52/53/58

| Embedded Antenna en 2.0dBi 2.5dBi

: Ethertronics (including cable loss0.5dB) (including cable loss1.0dB) Sleeve antenna 1.0dBi 1.1dBi

| : Sansei | TTF AaSo (including cable loss0.5dB) (including cable loss1.0dB) Conducted test of antenna port were performed the following test report and the results are available. Test Report No.: 10517042H-R1 Sincerely Yours, Toshiro Kometani Senior Manager Silex Technology, Inc.

silex technology www. silex. jp Request for Modular Transmitter Approval March 12, 2016 FCC ID :N6C-SDMAN Applicant: Silex Technology, Inc. This transmitter, model: SX-SDMAN is designed by us. It complies with the modular transmitters basic requirements (Item | to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below:

Modular Approval Checklist:

Modular approval requirement

(1) Have its own RF shielding. x) Xis

(2) Have buffered modulation/data inputs.

(3) Have its own power supply regulation.

(4) Comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c).

(5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available. XI Ll} O O OU U4 Kk} &

(6) Equipped with either a permanently affixed label or must be | [X] LJ capable of electronically displaying its FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.

(7) Comply with any specific rules or operating requirements that | Xx] LJ ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.

(8) Comply with any applicable RF exposure requirements in its | [IX] L]

final configuration: The modular transmitter complies with FCC radiation exposure requirement. a a /___}f LOM) TV Kome [eu Toshiro Kometani Senior Manager Silex Technology, Inc.

silex technology www. silex. jp Declaration Letter of FCC 14-30_Old or New rule September 11, 2015 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 FCC ID : N6C-SDMAN Applicant: SILEX TECHNOLOGY INC, To Whom It May Concern:

This application apply the new rule on KDB926956 DO1 U-NII Transition Plan v01r02 and KDB905462. However, it has not been confirmed to meet new rules of FCC 14-30 in a state of attaching the following antennas. Therefore, the testing and the class 2 permissive change application are required before using these antennas.

| Antenna Type Antenna Gain Mini-Nanoblade antenna Stand Alone antenna Thank you for your attention to this matter. Sincerely, Toshiro Kometani SILEX TECHNOLOGY INC.

silex technology Request for Modular Transmitter Approval WWW- silex. jp August 7, 2015 FCC ID :N6C-SDMAN Applicant: Silex Technology, Inc. This transmitter, model: SX-SDMAN is designed by us. It complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below:

Modular Approval Checklist:

of 15.203, 15.204(b) and 15.204(c).

(5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available.

(6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.

(7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.

(8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. Toshiro Kometani Silex Technology, Inc.

silex technology www. silex. jp Request for Short-Term Confidentiality Date: August 7, 2015 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCCID : N6C-SDMAN Applicant: Silex Technology, Inc. To whom it may concern:

Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459:

Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Toshiro Kometani Silex Technology, Inc.

:

:

N6C-SDMAN Silex Technology, Inc. Date: November 4, 2014 Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID Applicant To whom it may concern:

This product was granted DTS on 08/20/2012 as follows;

FCC Rule Parts 15C 15C 15C Though, 0.1723 of the Output Watts in 2412-2462MHz was typo. 0.1730 is the correct value. Please refer to the Test report (32IE0154-HO-01-A-R1) Therefore, please issue the grant with the following fixed value. FCC Rule Parts 15C 15C 15E Frequency Range (MHz) 2402-2480 2412-2462 5745-5825 Frequency Range (MHz) 2402-2480 2412-2462 5745-5825 Output Watts 0.0086 0.1723 0.198 Output Watts 0.0086 0.1730 0.198 Sincerely Yours, Yoshihisa Maeda UL Japan, Inc. Note This frequency will be replaced from DTS to NII in this application.

Silex technology FCC Class Il Permissive Change Request Letter Date: July 9, 2014 To FCC:

RE: FCC Permissive Il Change Request for Company: Silex Technology, Inc. FCC ID: NSC-SDMAN We are submitting an application for a class Il permissive change to the FCC approval of the Company name: Silex Technology, Inc., product description: SDIO Wireless Module (FCC: N6C-SDMAN, Original Grant Date: 8/20/2012) The transmitter module itself has not changed. Here are the changes:

1) Reducing the conducted transmit outout power for WIFI. Sincerely, Dhowkor Toshiro Kometani / R&D Senior Manager 2-3-1 Hikaridai, Seika-cho Sourakugun, Kyoto 619-0237 Japan kometani@silex.jp / PH: +81-774-98-3878 Silex Technology, Inc 2-3-1 Hikaridai, Seika-cho, Kyoto 619-0237, Japan Phone: +81-774-98-3877 Fax: +81-774-98-3678