Slide the stand o the camera. Insert the Micro-USB into the port on the back of the camera. Replace the stand, and plug the cord into a power outlet. Launch the SimpliSafe app on your smartphone. Go to Cameras in the main menu and tap the icon. Setup Guide Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Legal Notice FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body and must not be collocated or operating in conjunction with any antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This class B digital apparatus complies with Canadian ICES-003. ROHS This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restric-
tion of the use of certain hazardous substances in electrical equipment. Mentions Legales Dclaration de la FCC propos des interfrences Cet appareil a t test et dclar conforme aux limites imposes aux appareils lectroniques de classe B, dnies la section 15 de la rglemen-
tation de la FCC. Ces normes sont destines assurer une protection raisonnable contre les interfrences nuisibles dans un environnement rsidentiel. Cet appareil produit, utilise et peut mettre des frquences radio et, s'il n'est pas install et utilis conformment aux instructions, provoquer des interfrences gnantes pour les communications radio. Cependant, tout risque d'interfrences ne peut tre totalement exclu : si cet appareil provoque des interfrences lors de la rception d'missions de radio ou de tlvision (il sut, pour le constater, de mettre l'appareil successivement hors, puis de nouveau sous tension), l'utilisateur devra prendre les mesures ncessaires pour les liminer. cette n, il devra:
Rorienter ou dplacer l'antenne de rception Augmenter la sparation entre l'quipment et le rcepteur Brancher l'quipment sur une prise de courant relie un circuit dirent de celui sur lequel le rcepteur est branch Consulter le revendeur ou un technicien radio/TV experiment pour obtenir de l'aide. Dclaration d'exposition aux radiations Cet quipement est conforme aux limites dexposition aux radiofrquences de la norme RSS-102 d'IC, tablies pour un environnement non contrl. Cet quipement ne doit pas tre plac ni utilis de sorte que lmetteur se trouve dans un rayon infrieur 20 cm entre celui-ci et votre corps. Cet appareil est conforme la section 15 de la rglementation FCC. Son utilisation est soumise aux deux conditions suivantes: (1) ce matriel ne doit pas gnrer d'interfrences ; (2) ce matriel doit accepter toute rception d'interfrence, y compris les interfrences pouvant gnrer un fonctionnement indsirable. Attention!
Le fabricant ne peut tre tenu responsable des interfrences radio ou TV provoques par des modications non autorises apportes cet appareil. De telles modications peuvent annulaer le droit dutilisation de appareil par lutilisateur. Dclaration concernant les normes dIC Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Cet appareil est conforme (aux) norme(s) RSS exempte(s) de licence d'Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes : (1) cet appareil ne peut pas provoquer d'interfrence nuisible et (2) cet appareil doit accepter toute interfrence reue, y compris des interfrences pouvant entraner un fonctionnement non dsir. ROHS Ce produit est conforme la directive RoHS 2011/65/UE du parlement europen et du conseil du 8 juin 2011 sur la limitation de lutilisation de certaines substances dangereuses dans les lectriques et lectroniques.