FCC ID: X8F-LX2 Smart Watch

LX2 Smart Watch User Manual Before using please check instruction V0.1 1.Considerations for use Notice 1.1 Company reserves the right to modify the contents of this manual without any notice. It is normal for some functions to differ in a particular software version. 1.2 Please charge the product for more than 2 hours before using 1.3 Do not press the button or slide the screen in the water. 1.4 This product supports IP68 waterproof, which is not suitable for diving, soaking hot water, brewing tea and other corrosive liquids. Diving more than 3 meters or pressing the button underwater may cause water entering into the product, which is a destructive use and will not enjoy the product warranty and free maintenance. 1.5 Mobile Device Requirements Android: Support original Android 5.0 and above Android mobiles IOS: Support IOS 9.0 and above 2. Product Introduction Basic operation 2.1 First use, system need to set features, please be patient 2.1.1 Setting Language: set the language you need. 2.1.2 Setting body features, weight, height, Daily exercise goals, etc 2.1.3 Select the your mobiles 2.1.4 Scan the QR code, download and install the sync app according to the tips on your watch.Synchronization software can synchronize the relevant information on the phone to the watch shortcut interface, convenient for you to read, see the

"synchronization software instructions" in detail. 2.2 Press and hold the Power button until the device turns on. 2.2.1To turn the device off: Press and hold the Power button, tap Power off. 2.2.2 Restart: restart the device;

2.2.3 Super power saving: when this option is selected, the super power saving button changes from gray to green, indicating that the system will enter the super power saving mode. The super power saving mode only displays time and power, while other functions are in a deep sleep. The screen cannot slide into function selection.Click the "X" button in the power-saving mode interface to resume normal use. 2.2.4 Recent task: which is the most recent use of the application shortcut, swipe left or right to close the background application, free memory;Swipe up or down to quickly open used apps. 2.3 Basic Operation The dial area is small, during operation, the sliding distance is required to be more than half of the screen diameter, only sliding the middle distance may be invalid. 2.3.1 you can choose functions;

Dial interface from right to left, enter the main menu, Main menu interface, from left to right swipe, are exit Dial effect drawing and setting method :(see the product for more 2.3.2 functions. dial) 3. Notice charge normal;

3.1 Please charge it fully before use, it will take 1-2 hours to 3.2 Charging cable can use the charging head of android smartphone, and use the special magnetic absorption charging cable configured;During charging, keep magnetic absorption 3.3 BT disconnects over the distance during use. After two-way anti-loss is enabled, it cannot use the search function before reconnection. 3.4 When the watch and the mobile phone synchronization software are connected successfully and some functions cannot be used normally, please delete the paired BT information and reconnect. If the connection steps are not as described in the manual, the result will lead to abnormal connection and some functions cannot be used normally. 4. Trouble Sheet Please refer to the following terms to solve the problems arising from the use of mobile phones.If the problem still exists, please contact the dealer or appoint a repairman. 4.1 Can not switch on Press and hold the Power button more than 3 seconds charge the smart watch 4.2 Automatically switch off. Low power, please charge 4.3Watch lasts only a short time The battery is not fully charged, please make sure that there is sufficient charging time (the minimum charge time is 2 hours). The function of raising the hand and brightening the screen is on, which consumes more power 4.4 Watch cant charge Check the charger, or change another charger., Please ensure the PIN on both Smart watch and charger are connected, try one more time. FCC/ISEDCComplianceNotice ThisdevicecomplieswithPart15oftheFCCRulesandISEDCLicenceexempt RSSstandard. Operationissubjecttothefollowingtwoconditions:

(1)Thisdevicemaynotcauseharmfulinterference,and

(2) This device must accept any interference received,including interference thatmaycauseundesiredoperation. Anychangesormodificationsnotexpresslyapprovedbythepartyresponsible forcompliancecouldvoidtheusersauthoritytooperatetheequipment. Cetappareilestconformelapartie15desrglesdelaFCCetlanormeRSS exonredelicenceISEDC. Loprationestsoumiseauxdeuxconditionssuivantes:

(1)cetappareilnepeutpascauserdinterfrencesnuisibles,et

(2) cet appareil doit accepter toute interfrencesquipeuventcauserunfonctionnementindsirable. Toutemodificationoumodificationnonexpressmentapprouveparlapartie responsable de la conformit pourrait annuler lautorisation de lutilisateur dutiliserlquipement. interfrence reue, y compris les ThisdevicehasbeentestedandfoundtocomplywiththelimitsforaClassB digitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesigned toprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation.Thisequipmentgenerates,usesandcanradiatedradiofrequency energy and,ifnot installedandusedinaccordance withtheinstructions,may causeharmfulinterferencetoradiocommunications. However,there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or moreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connect the equipment into an outlet on a circuit different from that to whichthereceiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. RFExposureInformation SAR tests are conducted using standard operating positions accepted by the FCC/ISEDCwiththedevicetransmittingatitshighestcertifiedpowerlevelinall testedfrequencybands,althoughtheSARisdeterminedatthehighestcertified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public,itmustbetestedandcertifiedtotheFCC/ISEDCthatitdoesnotexceed the exposure limit established by the FCC/ISEDC, Tests for each product are performed in positions and locations as required by the FCC/ISEDC. For Handheldoperation,thisdevicehasbeentestedandmeetstheFCC/ISEDCRF exposureguidelineswhenusedwithanaccessorydesignatedforthisproduct orwhenusedwithanaccessorythatcontainsnometal. Forlimbwornoperation,thisdevicehasbeentestedandmeetstheFCC/ISEDC RF exposure guidelines when used with an accessory designated for this productorwhenusedwithanaccessorythatcontainsnometal. Informationssurl'expositionRF LestestsSARsonteffectusl'aidedepositionsdefonctionnementstandard acceptesparlaFCC/ISEDC,l'appareiltransmettantsonniveaudepuissance certifilepluslevdanstouteslesbandesdefrquencestestes,bienquele SARsoitdtermin auniveaudepuissancecertifilepluslev,leniveaude le fonctionnement peut tre bien infrieur la valeur maximale. Avant qu'un nouveau modle ne soit disponible la vente au public, il doit tre test et certifi conforme par la FCC/ISEDC qu'il n'excde pas la limite d'exposition tablie par la FCC/ISEDC. Les tests de chaque produit sont effectus requis par la FCC/ISEDC. En mode portatif, cet appareil a t test et respecte les directives d'exposition RF de la FCC/ISEDC lorsqu'il est utilis avec un accessoire conu pour ce produit ou avec un accessoire ne contenant pas de mtal. Pourlefonctionnementdesmembresuss,cetappareilattestetrespecte les directives d'exposition RF de la FCC/ISEDC lorsqu'il est utilis avec un accessoireconupourceproduitoulorsqu'ilestutilisavecunaccessoirene contenantpasdemtal.

SkyHawke Technologies, LLC ADD: 274 Commerce Park Drive Ridgeland Mississippi United States TEL: 601-605-6100 FAX: 601-605-1664 E-mail: rroot@skyhawke.com Date: 2022-05-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, SkyHawke Technologies, LLC, hereby authorize China Certification ICT Co., Ltd (Dongguan) to act as a laboratory for testing and test report generation for the following project(s):

(Product description: smart watch, FCC ID:X8F-LX2) The chipset MT6580 supports Bluetooth,BLE,2.4G Wi-Fi, GSM,WCDMA.But for this device, only Bluetooth, BLE 1M and 2.4G Wi-Fi were active, others were disable by software. Sincerely, Signature:

Printed Name: Richard Root Title: VP of Technology

SkyHawke Technologies, LLC ADD: 274 Commerce Park Drive Ridgeland Mississippi United States TEL: 601-605-6100 FAX: 601-605-1664 E-mail: rroot@skyhawke.com FCC Confidential Authorization Date: 2022-05-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding app In accordance with Sections 0.457 and 0.459 of the Commissions Rules, (SkyHawke Technologies, LLC) hereby requests long-term confidential treatment of information accompanying this application as outlined below:

lication for certification of FCC ID:X8F-LX2 Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature:

Printed Name: Richard Root Title: VP of Technology QA-FR-171-A

SkyHawke Technologies, LLC ADD: 274 Commerce Park Drive Ridgeland Mississippi United States TEL: 601-605-6100 FAX: 601-605-1664 E-mail: rroot@skyhawke.com FCC Authorization Date: 2022-05-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

Sincerely Yours, Clients signature Printed Name: Richard Root Title: VP of Technology QA-FR-170-B We , SkyHawke Technologies, LLC, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd

(Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant.