Project Name Approval Sheet Rev. Foxconn Part No. Sony Part No. Prepared by Clon Liu Ambit Microsystems (Shanghai) LTD. No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China Tel :86-21-61206688 Ext:22165 FAX:86-21-57749230 Approval Sheet of J20H084ac Customer Name: Sony Corporation WiFi+BT module J20H084.00 1.0 Reviewed by Eddie Huang Approved by 1 CONTENTS 1 REVISION HISTORY ..................................................................... 4 2 MANUFACTURING INFORMATION ........................................................ 5 6 5 3 3.1 3.2 4.1 4.2 4.3 5.1 5.2 5.3 5.4 5.5 PRODUCT OVERVIEW ................................................................... 6 APPLICATION SCOPE .................................................................... 6 REGULATION OF EACH COUNTRIES ...................................... !
4 MODULE HARDWARE OVERVIEW ........................................................ 7 BLOCK DIAGRAM ....................................................................... 7 FEATURES ............................................................................ 7 INTERFACE AND CONNECTOR ............................................................. 7 ELECTRICAL SPECIFICATION ............................................................ 9 ABSOLUTE MAXIMUM RATING ............................................................. 9 RECOMMENDED OPERATING RATING ....................................................... 9 DC CHARACTERISTICS .................................................................. 9 ESD INFORMATION ..................................................................... 9 ENVIRONMENT STORAGE CONDITION ....................................................... 9 RF SPECIFICATION .................................................................... 10 IEEE802.11B ........................................................................ 10 IEEE802.11G ........................................................................ 11 IEEE 802.11N HT20 .................................................................. 12 IEEE 802.11A ........................................................................ 14 IEEE 802.11AN HT20 ................................................................. 15 IEEE 802.11AN HT40 ................................................................. 16 IEEE 802.11AC VHT20 ................................................................ 17 IEEE 802.11AC VHT40 ................................................................ 18 IEEE 802.11AC VHT80 ................................................................ 19 BLUETOOTH 3.0 ....................................................................... 20 ANTENNA ELECTRICAL SPECIFICATION..................................................... 22 7 MECHANICAL SPECIFICATIONS......................................................... 23 SHIELDING COVER DIMENSION ........................................................... 23 PCB ASSEMBLY DIMENSION ............................................................. 25 MOUNT POSITION OF MATERIALS ....................................... !
SCHEMATICS ......................................................... !
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 7.1 7.2 7.3 8 9 LAYOUT PATTERN .................................................... !
MAIN PCB LAYOUT .................................................. !
ANTENNA PCB LAYOUT ............................................... !
10 BOM (BILL OF MATERIALS) ............................................ !
9.1 9.2 11 LABEL INFORMATION ................................................. !
11.1 MAC ID LABEL (FOR PVT, MP) ........................................ !
12 PACKAGE AND STACK INFORMATION ................................. !
12.1 CARTON ASSY ..................................................... !
12.2 PALLET ASSY ...................................................... !
TRAY ID LABEL ..................................................... !
12.3 2 12.4 CARTON LABEL ..................................................... !
12.5 PALLET LABEL ...................................................... !
13 RELIABILITY TEST PLAN .............................................. !
14 ESD TEST REPORT ................................................... !
15 NOTIFICATION ........................................................ !
3 1 Revision History Date Document revision Change Description 2014/02/19 1.0 Initial release 4 2 Manufacturing Information Manufacture Country:
Made in China Manufacturer:
Ambit Microsystems (Shanghai) LTD. Manufacture Address:
No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China 5 3 Product Overview The J20H084.00 802.11a/b/g/n/ac 2X2 and BT4.0+LE module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on MTK MT7662U solution .It fully complies with IEEE 802.11n,IEEE 802.11 a/b/g and ,IEEE 802.11 ac standards, Bluetooth v2.1+EDR, V4.0 standard, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. 3.1 Application scope The wireless LAN is compliant to IEEE 802.11n,IEEE 802.11 a/b/g and IEEE 802.11 ac standards. Channel Spacing 2.4GHz -> 5MHz, 5GHz-> 20MHz (BW on 20MHz),40MHz (BW on 40MHz) Data rate:
1, 2, 5.5, 11Mbps for 802.11b;
6, 9, 12, 18, 24, 36, 48 and 54Mbps for 802.11a/g;
MCS0(6.5Mbps)~MCS7(72.2Mbps) for 802.11n HT20 mode (single chain);
MCS0(13Mbps)~MCS15(144.4Mbps) for 802.11n HT20 mode (dual chains);
MCS0(13Mbps)~MCS7(150Mbps) for 802.11n HT40 (5G only) mode (single chain);
MCS0(26Mbps)~MCS15(300Mbps) for 802.11n HT40 (5G only) mode (dual chains);
MCS0(6.5Mbps)~MCS8(86.7Mbps) for 802.11ac VHT20 mode (single chain);
MCS0(13Mbps)~MCS8(173.3Mbps) for 802.11ac VHT20 mode (dual chains);
MCS0(13.5Mbps)~MCS9(200Mbps) for 802.11ac VHT40 mode (single chain);
MCS0(27Mbps)~MCS9(400Mbps) for 802.11ac VHT40 mode (dual chains);
MCS0(32.5Mbps)~MCS9(433.3Mbps) for 802.11ac VHT80 mode (single chain);
MCS0(65Mbps)~MCS9(866.6Mbps) for 802.11ac VHT80 mode (dual chains);
BT:
The BT Module is compliant to Bluetooth 4.0 and EDR standard:
Carrier Frequency: 2402MHz ~ 2480 MHz Carrier Spacing: 1.0MHz (classic), 2MHz (LE) Duplexing: TDD Modulation: FHSS 1Mbps (GFSK), 2Mbps (/4-DQPSK), 3Mbps (8DPSK),LE (GFSK) 6 4 Module Hardware Overview 4.1 Block Diagram NA 4.2 Features IEEE802.11a/b/g/n/ac (2X2) based on MTK MT7662U solution. Support BT4.0+LE USB 2.0 Interface, High and Full Speeds supported. Module is powered by the host with a 3.3V +/- 5% supply. External PCB printed antennas. 4 layers through hole PCB design with FR4 material 4.3 Interface and Connector Pin definition:
Vendor: JST Vendor P/N: SM15B-GHS-TB Pin Number Symbol Name 1 2 3 4 5 6 UART_RX UART_TX GND RST_L WOW_H WOBT_H Pin definition UART_RX for BT UART_TX for BT Ground L-drive reset signal input from Host. Wake on WLAN signal output. H-drive is hoped when awake Host. Wake on Bluetooth signal output. H-drive is hoped when awake Host. Status Input Output
-
Input Output Output 7 GND DM DP GND VSYNC GND GND VCC VCC 7 8 9 10 11 12 13 14 15 S1 S2
-
I/O I/O
-
Input
-
-
PWR PWR
(old: Host_wake) Ground USB_DATA-
USB_DATA+
Shield Ground 3D Video sync Signal Ground Ground DC 3.3V DC 3.3V Ground Ground 8 5 Electrical Specification Absolute maximum rating Element DC supply voltage Symbol UV+
Min Recommended operating rating Element DC supply voltage Symbol UV+
Min 2.97 DC Characteristics Parameter Symbol UV+
Supply voltage 2.412GHz Tx Current(1M/16dBm) 2.412GHz Tx Current(MCS0/15dBm) 5.18GHz Tx Current(6M/13Bm/HT20) 5.19GHz Tx Current(MCS0/13dBm/HT40) Rx Current 5.21GHz Tx Current(MCS9/11dBm/VHT80) Min 2.97 Typ 3.3 Typ 3.3 Typ. 3.3 470 440 580 560
-
450 Max 3.65 Unit
(V) Max 3.63 Unit
(V) Max 3.63 Unit
(V)
(mA)
(mA)
(mA)
(mA)
(mA)
(mA) ESD Information Mode HBM Level
+/-1000 Unit V 5.1 5.2 5.3 5.4 Environment condition Environment Storage Condition 5.5 Temperature Humidity Operating Temperature: -10 deg.C ~60 deg.C Storage Temperature: -40 deg.C ~85 deg.C Operating Humidity: 20% ~90%
Storage Humidity: 20% ~90%
9 6.1 Items IEEE802.11b Contents IEEE802.11b DSSS / CCK CH1 to CH13 6 RF Specification Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@1Mbps 2) Target Power@2Mbps 3) Target Power@5.5Mbps 4) Target Power@11Mbps 2. Spectrum Mask @15dBm 1) fc-33MHz f fc-22MHz 2) fc-22MHz f fc-11MHz 3) fc+11MHz f fc+22MHz 4) fc+22MHz f fc+33MHz 3. Frequency Error@25 4 Modulation Accuracy(EVM)@15dBm 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps RX Characteristics 5 Minimum Input Level Sensitivity 1) 1Mbps (FER8%) 2) 2Mbps (FER8%) 3) 5.5Mbps (FER8%) 4) 11Mbps (FER8%) 6 Maximum Input Level (FER8%) 1, 2, 5.5, 11Mbps Typ. Max. 16 16 16 16
-
-
-
-
-
Typ.
-95
-91
-90
-89 0 17.5 17.5 17.5 17.5
-50
-30
-30
-50
+5
-10
-10
-10
-10 Max.
-91
-88
-87
-85
-
Unit dBm dBm dBm dBm dBr dBr dBr dBr ppm dB dB dB dB Unit dBm dBm dBm dBm dBm Min. 14.5 14.5 14.5 14.5
-
-
-
-
-5
-
-
-
-
Min.
-
-
-
-
-10 10 Contents IEEE802.11g OFDM CH1 to CH13 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 13.5 13.5 13.5 13.5 12.5 12.5 12.5 12.5
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-20 Typ. 15 15 15 15 14 14 14 14
-
-
-
-
-
-
-
-
-
-
-28
-
Typ.
-92
-91
-90
-87
-85
-80
-77
-75
-11 Max. 16.5 16.5 16.5 16.5 15.5 15.5 15.5 15.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+5 Max.
-83
-81
-79
-77
-75
-73
-71
-69
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.2 IEEE802.11g Items Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error@25 RX Characteristics 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6 Maximum Input Level (PER < 10%) 11 6.3 IEEE 802.11n HT20 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @14dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@14dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25 RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Contents IEEE802.11n HT20 OFDM CH1 and CH11~CH13 MCS0/1/2/3/4/5/6/7 Max. Typ. 15 15 15 15 14 14 14 14
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
-91
-89
-87
-84
-80
-75
-74
-72
-10 16.5 16.5 16.5 16.5 15.5 15.5 15.5 15.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+5 Max.
-81
-79
-77
-75
-73
-71
-69
-67
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 13.5 13.5 13.5 13.5 12.5 12.5 12.5 12.5
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-20 12 Contents IEEE802.11n HT20 OFDM CH2 to CH10 MCS0/1/2/3/4/5/6/7 Typ. Max. 15 15 15 15 14 14 14 14
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
-91
-89
-87
-84
-80
-75
-74
-72
-10 16.5 16.5 16.5 16.5 15.5 15.5 15.5 15.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+5 Max.
-81
-79
-77
-75
-73
-71
-69
-67
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 13.5 13.5 13.5 13.5 12.5 12.5 12.5 12.5
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-20 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25 RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) 13 Contents IEEE802.11a OFDM CH36 to CH165 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-20 Typ. 13 13 13 13 12 12 12 12
-
-
-
-
-
-
-
-
-
-
-28
-
Typ.
-92
-91
-90
-87
-85
-80
-77
-75
-11 Max. 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+5 Max.
-83
-81
-79
-77
-75
-73
-71
-69
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.4 IEEE 802.11a Items Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3 Modulation Accuracy(EVM)@12dBm 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error@25 RX Characteristics 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6 Maximum Input Level (PER < 10%) 14 Contents IEEE802.11an HT20 OFDM CH36 to CH165 MCS0/1/2/3/4/5/6/7 Typ. Max. 13 13 13 13 12 12 12 12
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
-91
-89
-87
-84
-80
-75
-74
-72
-10 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+5 Max.
-81
-79
-77
-75
-73
-71
-69
-67
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-20 6.5 IEEE 802.11an HT20 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@12dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25 RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) 15 Contents IEEE802.11an HT40 OFDM CH38 to CH159 MCS0/1/2/3/4/5/6/7 Typ. Max. 12 12 12 12 12 12 12 12
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
-88
-86
-84
-81
-77
-72
-71
-69
-10 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28
+5 Max.
-78
-76
-74
-72
-70
-68
-66
-64
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.6 IEEE 802.11an HT40 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @12dBm 1) at fc +/- 21MHz 2) at fc +/- 40MHz 3) at fc > +/-60MHz 3. Modulation Accuracy(EVM)@12dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25 RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-20 16 Contents IEEE802.11ac VHT20 OFDM CH36 to CH165 MCS0/1/2/3/4/5/6/7/8 Typ. Max. 13 13 13 13 12 12 12 12 11
-
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
-91
-89
-87
-84
-80
-75
-74
-72
-63
-10 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 12.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-27
-30
+5 Max.
-81
-79
-77
-75
-73
-71
-69
-67
-58
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 9.5
-
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-
-20 6.7 IEEE 802.11ac VHT20 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 9) Target Power@ MCS8 2. Spectrum Mask @11dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@11dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 4. Frequency Error@25 RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 8) MCS8 (PER < 10%) 6. Maximum Input Level (PER < 10%) 17 6.8 IEEE 802.11ac VHT40 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 9) Target Power@ MCS8 10) Target Power@ MCS9 2. Spectrum Mask @11dBm 1) at fc +/- 21MHz 2) at fc +/- 40MHz 3) at fc > +/- 60MHz 3. Modulation Accuracy(EVM)@11dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error@25 RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 7) MCS8 (PER < 10%) 8) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) Contents IEEE802.11ac VHT40 OFDM CH38 to CH159 MCS0/1/2/3/4/5/6/7/8/9 Typ. Max. 13 13 13 13 12 12 12 12 11 11
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
-88
-86
-84
-81
-77
-72
-71
-69
-64
-60
-10 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 12.5 12.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-27
-30
-32
+5 Max.
-78
-76
-74
-72
-70
-68
-66
-64
-59
-57
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 9.5 9.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-
-
-20 18 Contents IEEE802.11ac VHT80 OFDM CH42 to CH155 MCS0/1/2/3/4/5/6/7/8/9 Typ. Max. 13 13 13 13 12 12 12 12 11 11
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
-80
-78
-76
-74
-72
-70
-68
-66
-63
-59
-10 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 12.5 12.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-27
-30
-32
+5 Max.
-75
-73
-71
-69
-67
-65
-63
-61
-58
-54
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 9.5 9.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-5 Min.
-
-
-
-
-
-
-
-
-
-
-20 6.9 IEEE 802.11ac VHT80 Items Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@ MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 9) Target Power@ MCS8 10) Target Power@ MCS9 2. Spectrum Mask @11dBm 1) at fc +/- 41MHz 2) at fc +/- 80MHz 3) at fc > +/- 120MHz 3. Modulation Accuracy(EVM)@11dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error@25 RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 10) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) 19 6.10 Bluetooth 3.0 BT specification BDR TX PARAMETER DESCRIPTION Frequency range Output power At maximum power output level Gain step Modulation characteristics f1avg f2max(For at least 99.9% of all f2max) f1avg/f2avg ICFT Initial carrier frequency tolerance Carrier frequency drift One slot packet(DH1) Three slot packet(DH3) Five slot packet(DH5) Max drift TX output spectrum 20dB bandwidth 2MHz offset 3MHz offset
>3MHz offset In-Band spurious emission BDR RX PARAMETER DESCRIPTION Frequency range Receiver sensitivity BER<0.1%
Maximum usable signal BER<0.1%
C/I co-channel (BER<0.1%) Co channel selectivity C/I 1MHz (BER<0.1%) Adjacent channel selectivity C/I 2MHz (BER<0.1%) 2nd adjacent channel selectivity 3rd adjacent channel selectivity C/I >=3 MHz (BER<0.1%) C/I Image channel
(BER<0.1%) C/I Image 1MHz (BER<0.1%) 1MHz adjacent to image channel Inter-modulation Image channel selectivity selectivity 30MHz to 2000MHz 2000MHz to 2399MHz 2498MHz to 3000MHz 3000MHz to 12.75GHz Out-of-band blocking PERFORMANCE TYP
-
1 4 MAX 2480 3 8 Unit MHz dBm dB 157 175 KHz 140 0.98 922
-45
-48
-48
-
-
25 25 40 40 20 1000
-20
-40
-40 PERFORMANCE TYP
-
-93.5
-5 4
-14
-42
-49
-25
-50
-13 MAX 2480
-80 11 0
-30
-40
-9
-20 KHz KHz KHz KHz KHz KHz KHz/50us KHz dBm dBm dBm Unit MHz dBm dBm dB dB dB dB dB dB dBm dBm dBm dBm dBm MIN 2402
-1 2 140 115 0.8
-25
-25
-40
-40
-20 MIN 2402
-10
-27
-27
-10 20 EDR TX EDR RX 21 LE TX LE RX 6.11 Antenna Electrical Specification WiFi:
Frequency Ant.1 Peak Gain (dBi) Ant.2 Peak Gain
(dBi) 2.40GHz 3.54dBi 3.06dBi 2.45GHz 4.40dBi 3.12dBi 2.50GHz 3.90dBi 3.19dBi 5.15GHz 7.45dBi 7.63dBi 5.45GHz 6.20dBi 6.99dBi 5.85GHz 7.63dBi 7.87dBi Frequency Cable Length: 500mm Peak 2.40GHz 3.45dBi 2.45GHz 3.53dBi 2.50GHz 3.27dBi Gain (dBi) WiFi antenna BT antenna BT:
22 7 Mechanical Specifications Shielding Cover Dimension 7.1 Dimension (LxWxH): 22.44mm x 27.66mm x 1.5mm Thickness: 0.2mm 23 7.2 Dimension (LxWxH): 22.04mm x 27.26mm x 1.5mm Thickness: 0.1mm Shielding frame Dimension 24 PCB Assembly Dimension 7.3 Dimension (W x Lx H ): 80mmx25mmx1.0mm PCB: 4 layer FR4 design Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions:
(For module device use) 25
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC:
2878DJ20H084AC. 2878DJ20H084AC. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible 2878DJ20H084AC. avec l'inscription suivante: "Contient des IC: 2878D- J20H084AC". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC
ID: AK8J20H084AC. ID: MCLJ20H084AC. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. For Taiwan ()
Note: 1. 2.
: XXXyyyLPDzzzz-x (NCC ID)
Europe EU Declaration of Conformity ThisdevicecomplieswiththeessentialrequirementsoftheR&TTEDirective1999/5/EC.Thefollowingtestmethodshavebeen
appliedinordertoprovepresumptionofconformitywiththeessentialrequirementsoftheR&TTEDirective1999/5/EC:
EN609501:2006+A11:2009+A1:2010+A12:2011
SafetyofInformationTechnologyEquipment
EN62311:2008
Assessmentofelectronicandelectricalequipmentrelatedtohumanexposurerestrictionsforelectromagneticfields(0
Hz300GHz)
(IEC62311:2007(Modified))
EN300328V1.7.1:2006
ElectromagneticcompatibilityandRadiospectrumMatters(ERM);WidebandTransmissionsystems;Datatransmission
equipmentoperatinginthe2,4GHzISMbandandusingspreadspectrummodulationtechniques;HarmonizedENcovering
essentialrequirementsunderarticle3.2oftheR&TTEDirective
EN3014891V1.8.1:2008
ElectromagneticcompatibilityandRadioSpectrumMatters(ERM);ElectroMagneticCompatibility(EMC)standardforradio
equipmentandservices;Part1:Commontechnicalrequirements
EN30148917V2.1.12009
ElectromagneticcompatibilityandRadiospectrumMatters(ERM);ElectroMagneticCompatibility(EMC)standardforradio
equipmentandservices;Part17:Specificconditionsfor2,4GHzwidebandtransmissionsystemsand5GHzhighperformance
RLANequipment
NationalAuthoritieswereinformedaccordingtoArticle6.4ofFrequencyNotification.
SpecialRequirementsareconsidered.TheproductislabeledwithCEMarking.
29