Car door status detection, car anti-
owered, theft Timon Rechargeable Trailer and Asset Tracker Maximize efficiency. Minimize risks. Manage assets. WDS is a door sensor, used for remote monitoring of door opening and closing performance ITS RELIABLE WDS is an ultra-thin and durable high-
monitoring device designed specifically for anti-theft applications in containers and parking lots. WDS has an integrated Bluetooth receiver for wireless data communication, can communicate with other monitoring devices such as cameras to form a more complete detection system. The external high-performance antenna is suitable for Bluetooth long-distance transmission, giving the product strong performance. ITS SIMPLE No programming skills required; WDS comes with easy to configure application software and an extended AT command set. The report can be triggered regularly and can also respond to events such as opening or closing doors, severe acceleration and braking, and battery status violations. Can send notifications about the opening and closing status of vehicle doors and battery status ITS FUNCTIONAL The WDS interface supports battery and UART input/output. There are two systems, with built-in reed switches and magnets that can detect the status of car doors. A 3-axis accelerometer can achieve motion detection and monitoring of car door behavior, and real-time data can be sent out through Bluetooth broadcasting. The built-in lithium-ion battery of the device can run continuously for up to 10 years. HIGHLIGHT WDS LED status indicators for activation and pairing status of devices Integrated accelerometer for monitoring vehicle status & driver behavior Reed switch used to sense the status of the car door Battery used for system power supply UART&USB Over the air configuration and firmware update Extended AT Command set for flexible and easy configuration Small size and easy installation OPTIONAL FEATURES The application firmware is flexible and can be customized to be compatible with your existing server at special request. Spireon Inc. Specifications:
BATTERY INFORMATION Type : Li-ION Capacity :3000mAh @ 3V Battery Life : In sleep mode, report once a day for a maximum of 7 to10 years.
(Depending on Bluetooth signal strength a nd number of hourly reports per day) ENVIRONMENTAL Operation Temperature: -30C to +75C with Battery Storage Temperature: -40C to +85C ELECTRICAL Operating Voltage: 2.7V 3V Power Consumption:
Bluetooth pairing : ~ 8mA @ 3V Bluetooth broadcast package: ~ 6mA @ 3V Sleep mode : < 5uA @3V PHYSICAL Dimensions: 37.6 x 20.0 x 1.53 mm Internal Cellular and GPS Antennas Weight : ~11.5g APPROVALS FCC 47 PTCRB & Carrier Approved Asiatelco Technologies Inc. (ATEL) Asiatelco is the leading provider of wireless terminal products to its value customers worldwide. Its innovative products and solutions are widely used for reliable broadband access, IoT/M2M applications and voice communication with 4G LTE, 3G & 2G wireless technologies. ATELs sales and marketing are globally positioned. It has become globally well-known company in the wireless industry due to its excellent products, solutions and services.. For more information, contact Asiatelco Technologies Inc. Spireon Inc FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. ISED Warning statements This device complies with Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(l) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparationd'aumoins 20 cm doittremaintenue entre l'antenne de cetappareilettoutes les personnes. This Class B digital apparatus complies with Canadian ICES-003. Cetappareilnumeriquede la classe B estconforme a la norme NMB-003 du Canada