ST Engineering Telematics Wireless Ltd Sequencer User Manual Model: SEQUENCER Revision 1.0, May 2nd, 2021 Copyright Telematics Wireless Ltd. All rights reserved The document contains proprietary information of Telematics Wireless, Ltd.; it is provided under a license agreement containing restrictions on use and disclosure, and is also protected by copyright law. Due to continued product development this information may change without notice. The information and intellectual property contained herein is confidential between Telematics Wireless Ltd. and the client, and remains the exclusive property of Telematics Wireless Ltd. If you find any problems in the documentation, please report them to us in writing. Telematics Wireless Ltd. does not warrant that this document is error-free. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Telematics Wireless Ltd. ST Engineering Telematics Wireless Ltd Content 1. 2. General description ................................................................................................................ 3 Technical Data ....................................................................................................................... 4 2.1 Electrical interface .............................................................................................................................. 4 2.2 RF Radio Characteristics ..................................................................................................................... 4 2.3 Mechanical Characteristics ................................................................................................................. 4 2.4 Environmental Characteristics ............................................................................................................ 4 3. Installation ..................................................................................................................................... 5 4. Regulation Information .................................................................................................................. 5 FCC Part 15 Regulation Class B digital device notice ................................................................................ 5 CAN ICES-3 (B)/NMB-3(B) ......................................................................................................................... 5 FCC interference Notice ............................................................................................................................ 6 Industry Canada interference Notice ....................................................................................................... 6 FCC and Industry Canada Radiation Hazard Warning............................................................................... 6 2 ST Engineering Telematics Wireless Ltd 1. General description The Sequencer is a part of an Advanced Water Metering Infrastructure that communicates with water meter end-points via LoRa wireless communication. The infrastructure includes a sequencer, a LoRa gateway and PC computer running the LoRa server and application software to manage the communication with the water meter end-
points. Front panel Rear panel 3 ST Engineering Telematics Wireless Ltd 2. Technical Data 2.1 Electrical interface Table 1: Electrical interface Front panel Power switch IND Antenna connector Rear panel Power supply , external AC/DC USB Value ON/OFF LED indicator SMA female Value 120VAC to DC in 12VDC Type B 2.2 RF Radio Characteristics Table 2: RF radio characteristics Parameter Operating Frequency Modulation Maximum Transmitter output power Maximum Receiver Sensitivity Antenna, omni directional Value(1) 902-928 LoRa 20
-125 2.5max Unit MHz dBm dBm dBi 2.3 Mechanical Characteristics Table 3: Mechanical characteristics Feature Dimensions (mm) (connector excluded) Specifications 128 x 100 x 27 LxWxH 2.4 Environmental Characteristics Table 4: Environmental characteristics Feature Storage Temperature Relative Humidity Specifications
-20C to +70C
-20C to +70C 20% - 90% RH, non-condensing 4 ST Engineering Telematics Wireless Ltd 3. Installation Connect the antenna. Connect the AC/DC adaptor. LED indicator Power ON Tx mode Rx/Idle mode 4. Regulation Information LED is lit Yellow. LED is lit red when data is transmitting. LED is lit green when receiving mode or idle mode is enable. FCC Part 15 Regulation Class B digital device notice The digital circuit of this device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. 5 ST Engineering Telematics Wireless Ltd FCC interference Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Industry Canada interference Notice This device complies with Industry Canadas license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC and Industry Canada Radiation Hazard Warning WARNING! To comply with FCC and IC RF exposure compliance requirements, the device should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. Le dispositif doit tre plac une distance d'au moins 20 cm partir de toutes les personnes au cours de son fonctionnement normal. Les antennes utilises pour ce produit ne doivent pas tre situs ou exploits conjointement avec une autre antenne ou transmetteur. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS-102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. 6 ST Engineering Telematics Wireless Ltd WARNING! Changes or modifications to this equipment not expressly approved by the party responsible for compliance (ST Engineering Telematics Wireless Ltd.) could void the users authority to operate the equipment 7