Head Mounted Display QUICK GUIDE GUIDE RAPIDE de laffichage port sur la tte / GUIDA RAPIDA DELLO Schermo montato sulla testa (HMD) Head Mounted Display KURZANLEITUNG / GUA RPIDA del Pantalla del casco de realidad virtual
/
/
WHATS IN THE BOX?
HMD Tracker Holder 5m Type-C Cable 2 x 0.5m DP Cable 2 x 0.5m USB Type-A Cable 1 x Power Adapter
(ADP-18TB C or ADP-18HW B) 2 x Secure Cable Holder Cable Adapter Cable Adapter Anti-Slip Mat CONNECTING THE HMD - STEP 1 Type-C Cable Type-C Cable CONNECTING THE HMD - STEP 2 Type-C Cable Cable Adapter SECURING THE CABLE CONNECTOR Secure Cable Holder CONNECTING THE HMD - STEP 3 DP Cable USB Cable Power Cable 3 2 1 1 2 3 DP Port USB Port Power Connector CONNECTING THE HEADPHONE HMD Audio Cable Headphone Audio Cable MOUNTING THE TRACKER TO THE HMD Tracker Screws Tracker Holder APPLYING CABLE ADAPTER ANTI-SLIP MAT Anti-Slip Mat Back of Cable Adapter Radio Frequency Interference Warning For safety reasons, turn off all wireless or radio transmitting devices when using your laptop under the following conditions. These devices may include, but are not limited to: wireless LAN
(WLAN), Bluetooth and/or cellular. The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:
Using the wireless adapter on board airplanes, or Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment
(an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on. USA FCC and FAA The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/
IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:
Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio. The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital. FCC radio frequency interference requirements This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. Interference statement This wireless adapter and HMD have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:
Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure SAR Information FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body. Canada Industry Canada (IC) This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage,et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3(B)/NMB-3(B) Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. IC RF Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 0 cm de distance entre la source de rayonnement et votre corps. Temperature:
- Operating : 5C to 40C
- Storage: 20C to 60C Humidity (Non-Condensing):
- Operating : 20% to 80%
- Storage: 20% to 60 %
STARVR SUPPORT USA: Service.pa@starvr.com EUROPE: Service.emea@starvr.com CHINA: Service.cn@starvr.com TAIWAN: Service.tw@starvr.com STARVR WEBSITE VISIT US: https://www.starvr.com/
FOR DEVELOPERS: https://www.starvr-developer.com/
COPYRIGHT & TRADEMARKS 2017 STARVR Corporation. All rights reserved. Version 1.0 issued on November of 2017. The STARVR Logo is a registered trademark or trademark of Starbreeze VR AB. All use is duly authorized through license. TM DECLARATION OF CONFORMITY We, And, STARVR CORPORATION 25F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City, Taiwan Contact Person: Mr. Eric Lin, E-mail: Eric.Lin@starvr.com Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Product:
Trade Name:
Model Number:
SKU Number:
Head mounted display StarVR H7101 SH500 STARVR CORPORATION 25F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City, Taiwan We, STARVR CORPORATION, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU on Radio Equipment, RoHS Directive 2011/65/EU. The following harmonized standards and/or other relevant standards have been applied:
66 Electromagnetic compatibility (Directive 2014/30/EU) 66 EN 55032:2015 66 EN 61000-3-2:2014 Class D 66 EN 61000-3-3:2013 66 EN 55024: 2010+A1:2015 66 EN 301 489-1 V2.2.0 6 EN 301 489-3 V1.6.1 6 EN 301 489-7 V1.3.1 66 EN 301 489-17 V3.2.0 6 EN 301 489-24 V1.5.1 66 Radio frequency spectrum usage (Directive 2014/53/EU) 66 EN 300 328 V2.1.1 6 EN 302 291-1 V1.1.1 6 EN 302 291-2 V1.1.1 66 EN 300 440 V2.1.1 6 EN 300 440-2 V1.4.1 6 EN 301 511 V9.0.2 6 EN 301 893 V2.1.0 66 Healthy and Safety (Directive 2014/35/EU) 66 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013 6 EN 62311:2008 6 EN 62209-1:2006 6 EN 62209-2:2010 66 EN 62479:2010 66 RoHS (Directive 2011/65/EU) 66 EN 50581:2012 Operation frequency and radio-frequency power are listed as below:
2402-2480MHz < 10 dBm Year to begin affixing CE marking: 2018. 6 EN 301 908-1 V11.1.1 6 EN 301 908-2 V6.2.1 6 EN 301 908-13 V6.2.1 6 EN 50360: 2001/A1: 2012 6 EN 50566:2013 Eric Lin / Chief Operating Office STARVR CORPORATION 1/22/2018 Date Federal Communications Commission Declaration of Conformity STARVR CORPORATION 25F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City, Taiwan This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer /Importer is responsible for this declaration:
Product:
Trade Name:
Model Number:
SKU Number:
Name of Responsible Party:
Address of Responsible Party:
Contact Person:
Phone No.:
Fax No.:
January 22, 2018 Head mounted display StarVR H7101 SH500 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110, U. S. A. Acer Representative 1-254-298-4000 1-254-298-4147