FCC ID: 2AFDGVA-IH006A Baby Monitor

www.vava.com ASIA PACIFIC E-mail: support.jp@sunvalley.co.jp Tel: 03-5542-023810-18/

JP Importer: SUNVALLEY JAPAN Address: 104-003218-6 PMOF EUROPE E-mail: europe@sunvalley-group.de EU Importer: ZBT International Trading GmbH Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland NORTH AMERICA E-mail: support@vava.com Tel: 1-888-456-8468 (Monday-Friday: 9:00 17:00 PST) US Distributor: SUNVALLEYTEK INTERNATIONAL INC. Address: 46724 Lakeview Blvd, Fremont, CA 94538 MANUFACTURER Shenzhen NearbyExpress Technology Development Co.,Ltd. Address: 333 Bulong Road, Shenzhen, China, 518129 Learn more about the EU Declaration of Conformity: www.vava.com MADE IN CHINA V1.4 MODEL: VA-IH006BU, VA-IH006PU BABY MONITOR User Guide CONTENTS SAFETY INSTRUCTIONS CAUTION PACKAGE CONTENTS PRODUCT DIAGRAM GETTING STARTED 1. Charging & Powering Baby Monitor 2. Powering Camera 3. Pairing the Baby Monitor & the Camera 4. Placing the Camera 5. Wall Mounting Camera 6. Wide-Angle Lens (Optional) FUNCTIONS & OPERATIONS Monitor Interface Overview 1. Monitor Settings 2. Add / View / Delete a Camera 3. Digital Zoom & Circulating 4. Pan-n-Tilt 5. Volume Adjustment 6. Night Vision 7. Alarm 8. Talkback 9. Wide-angle Viewing (Optional) 10. Temperature Alert SPECIFICATIONS TROUBLESHOOTING WARRANTY & CUSTOMER SERVICE FCC STATEMENT IC STATEMENT 01 01 02 03 05 05 05 05 06 06 07 08 08 09 10 10 11 11 11 11 12 12 12 13 15 16 17 19 SAFETY INSTRUCTIONS Keep cord out of the reach of children (more than 3ft / 0.9m away) in case of STRANGULATION. 3ft NEVER place the camera or cord in or near the crib or playpen. NEVER mount the camera directly above the crib or playpen to avoid the risk of injury. Only use the AC adapters provided. Never use the unit near water, including near a bathtub, sink, laundry machine tube, wet basement, etc. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat. Only use attachments and accessories specified by the manufacturer. Unplug this device when unused for long periods of time. Do not insert anything into the upgrade pinholes. This operation is only intended for professionals. CAUTION NOT toys. Do not allow children to play with them. The lens and lens hood are small parts, keep them out of your babys reach at all times. This product is NOT intended to replace the proper supervision of children. You MUST check your childs activity regularly. This product is not intended for use as a medical camera and its use should not replace adult supervision. Unplug the product during lightning storms. Please check the operating range and condition of the camera carefully at 01 the initial installation, and on a regular basis after that. Check the reception regularly. Test the camera before use and after changing the cameras location. For indoor use only. Clean the camera with a dry cloth only. Do not block any ventilation openings. Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart. PACKAGE CONTENTS MENU ZOOM AUTO-PILOT

/ OK TALK Quick Start Guide User Guide Baby Monitor (Model: VA-IH006PU) & Camera (Model: VA-IH006BU) Monitor Adapter with USB-C Charging Cable Camera Adapter Micro-USB Charging Cable Quick Start Guide User Guide 02 PRODUCT DIAGRAM Baby Monitor Camera 1 2 8 4 5 6 7 8 9 10 11 12 13 MENU ZOOM AUTO-PILOT

/ OK TALK 1 2 3 14 15 16 1 Antenna 2 Volume Indicators 3 Microphone 4 Charging Indicator 5 Power Indicator 6 Menu Button 7 Zoom Button 8 Left Button 9 Up Button 10 Right Button 11 OK Button 12 Down Button 13 Talk Button 14 Power Button 15 Upgrade Pinholes 16 Back Stand 17 Speaker 18 USB-C Port 3 4 5 6 7 17 18 9 10 1 Camera Vents 2 Camera Antenna 3 Micro-USB Port 4 Temperature Sensor 5 Reset Pinhole 6 Power Switch 7 Speaker 8 Lens 9 Pairing Button 10 Mounting Hole 03 04 GETTING STARTED 1. Charging & Powering Baby Monitor 1) Connect the monitor adapter to the monitor and a power outlet. 2) Unplug the unit when its power indicator turns off, indicating a full charge. 3) Press the Power button on the monitor to power on with the power indicator lighting green. 2. Powering Camera 1) Connect the camera to power source via the Micro-USB cable and camera adapter. 2) Slide the Power Switch on camera to power on. Make sure the power indicator light is green. Only use the power adapters included in the package. Do not place the camera and power cord within the reach of your baby. 3. Pairing the Baby Monitor & the Camera By default, one camera has been paired with the monitor when manufactured. When you power on the monitor and camera, the two will automatically pair. To add more cameras, press the Pair Button at the bottom of the camera, press Menu button, select through auto-pair with the camera.

-> , and then the monitor will

->

4. Placing the Camera Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason and for a better view when in night vision mode. 5. Wall Mounting Camera 1) Select the spot to mount the camera, keeping it beyond your babys reach. 2) Insert the screw (not included) pre-installed on wall into the mounting hole of the camera. Once theyre paired successfully, the camera number with icon 1 will be shown at the top left. Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart. It is recommended to pair in the baby's room, or wherever you intend to place the camera. Its strongly recommended to use a screw and screw anchor. Dont release the camera until youre sure it is firmly mounted. 05 06 6. Wide-Angle Lens (Optional) The aluminum lens hood (no special video effects) has been installed when the camera was manufactured. To install wide-angle lens (sold separately), simply rotate the original lens hood counterclockwise to remove. Then install the new lens and rotate clockwise to fix in place. FUNCTIONS & OPERATIONS Monitor Interface Overview 1 2 25 PM 12:08 1 2 3 4 Top Status Indications Signal 4 levels 1 2 Current Camera Camera 1 / Camera 2 / Camera 3/ Camera 4 Zoom 2X / 4X Current Temperature C / F Night Vision Auto ON in a dim environment PM 12:08 Current Time AM / PM Alarm Mute ON / OFF Mute all system sounds Talk-back ON / OFF Battery 5 levels 07 08 Bottom Menu Brief Add Camera Max. 4 cameras View Camera Select to view each at a time Delete Camera Select to delete cameras Speaker Volume 0-6 levels (mute when its 0) Brightness 1-8 levels Camera To add / view / delete cameras Alarm Settings OFF / 2Hr / 4Hr /6Hr / Set Time

(hour / minute / AM, PM) Time System sound volume Temperature scale Auto-sleep time Restore to factory setting Customer service contacts To mute the sound during poor monitor-camera connection, please set the system sound volume to mute. When the monitor screen is under sleep mode, the power indicator flashes green slowly while the audio is still on; press any button to awake. You can also short press the Power Button to turn the screen off. Press and hold the Power Button to power on / off the monitor. 2. Add / View / Delete a Camera 1) Press Menu button, select through 2) Select through 3) Select through to view a camera. to delete a camera.

->

->

->

->

to add a camera. You can switch viewing different cameras; the current camera number will be shown with the Camera icon on the monitor. You can only select one camera to view at one time. 1. Monitor Settings Press Menu Button, Left and Right Buttons, and then OK Button to set the monitor:

1) 2) 3) 4) 5) Time setting: Set the current time by setting hour, minute, and AM/ PM. System sound volume: Select between Low, High, and Mute. Temperature scale: Select between C and F. Screen auto-sleep time: Select between 1min, 2min, 5min, and OFF. Restore to factory settings: Press OK Button to confirm resetting;

Restoring factory settings will be shown when restoring, and you cant press any button to control the device during this period. The monitor will auto restart when its done. 6) Customer service contacts: Check the email, Tel. number, and address for customer service. 09 3. Digital Zoom & Circulating Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third pressing of the button will restore to the original image. Press and hold OK Button 4 seconds to start auto circulating, press OK again to stop. The current zoom level number will be shown with the Zoom icon 2 on the monitor 10 4. Pan-n-Tilt When viewing the camera, press Left / Right / Up / Down Button to view at different angles, 108 degrees vertically and 270 degrees horizontally. 8. Talkback Press and hold Talk Button to talk to your baby, release it to exit the talking mode. 5. Volume Adjustment Press Menu Button -> OK Button -> Left / Right Button to volume down / up, and OK Button to saving your settings. For system sound adjustment, please go to Monitor Settings ->

System sound volume

. 6. Night Vision The night vision is automatically activated in a dim environment. The camera has 12 high-intensity infrared LEDs for picking up clear images in the dark. Black and white images can be captured within 2m distance. 7. Alarm Press Menu Button -> Right Button to locate Alarm menu -> OK Button ->

Up / Down Button to select the timer setting. You can set a 2Hr, 4Hr or 6Hr alarm, or set the hour and minute otherwise. When the alarm time is reached, a beep will be heard. Press OK Button to stop; otherwise itll keep beeping for 30s, beeping again in 1min, stops after its alerted 3 times. When the timer is set, the Alarm icon will be shown on the monitor. Before setting, please check that the monitor time is your current time. 11 When you enter the talking mode, the icon will be shown on the monitor. When its mute or the speaker volume is too low, you may not be able to hear the baby. When youre pressing the Talk Button, the camera will not transfer the sound to the monitor. Please release the button to listen to your baby. 9. Wide-angle Viewing (Optional) Install your wide-angle lens (separately sold) referring to the previous mounting wide-angle lens section. Now you can view the camera in a wider angle of about 170 degrees. 10. Temperature Alert The monitor will prompt too high (>35C / 95F) and too low (<0C / 32F) temperatures with the HH and LL icon, accompanied with a icon and a beep alert.

&

When the monitor is mute, you may not be able to hear the baby. 12 SPECIFICATIONS Monitor Model Sonix IC VA-IH006PU SN93700 Resolution IPS (720 x 1280), PPI=293 Connectivity 2.4GHz Image Aspect 16:9 (HD720) Image Compression h.264 (frame rate = 18fs) Operating Range 280 - 300m (antenna vertically positioned at 90) Temperature Alert Yes Volume Control Brightness Antenna Power Input Zoom 8 levels 8 levels Rotatable (max. 90 degree) 5V / 2A (1.5m long USB C cable) Zoom In (2X) Zoom In (4X) Auto-Pilot (1 Cycle) Two-Way Talk Yes Multi-Camera Max. 4 cameras Storage Temperature -10C ~ 55C / 14 - 131F Operation Temperature 0C ~ 40C / 32 - 104 F Camera Model Cmos VA-IH006BU 720p (1280x720), 3.0M, 1/4"

Connectivity 2.4GHz Image Compression h.264 (frame rate = 18fs) Power Input 5V / 1.2A, 2.5m-long Micro-USB cable Pan-n-Tilt 108 degrees vertical (Up=90, Down=18) 270 degrees horizontal (Left=135, Right=135) Zoom Zoom In (2X) Zoom In (4X) Auto-Pilot (1 Cycle) View Angle Vertical: 1.5m, Horizontal: 1.4m Lens Focal Length 1.5m to infinity Night Vision Black & White image, up to 2m clear range IR LED Non-visible IR LED with wavelength 940nm (x 12 pcs) Light Sensor Two-Way Talk Yes Yes Storage Temperature -10C ~ 55C / 14 - 131F OperationTemperature 0C ~ 40C / 32 - 104 F 13 14 TROUBLESHOOTING Product not powering on?

Baby monitor cant connect with the camera?

Nothing shown when I view a camera?

15 Check that the camera and monitor are turned on. Check the camera is connected to power properly (it cannot be charged; its power off once disconnected from power). Check that the monitor is of enough battery (itll auto shut off when battery level icon flashes red slowly on the monitor). Check whether the camera is near the monitor

(recommended to keep within 1.5-2m / 4.9-6.6ft). Check whether the monitor is of low battery. Charge it in time to restore good connection. Check whether the camera is well connected to power. Check whether there are any large metallic objects including doors, refrigerators, mirrors, etc., are placed between the camera and monitor thus blocking the radio signals. Check whether theres any other 2.4GHz product is used nearby like WiFi routers, microwave ovens, which may interfere the connection. If nothing above is involved, please retry to pair:

Press and hold the OK button on monitor to enter pairing mode, and the monitor will connect with the camera nearby automatically. Check all connections to the camera (power cable plugging and pairing). Check whether the screen is in sleep mode. Press any button to awake it. Check whether the camera is within range of the monitor. Adjust the monitor antenna to vertical position for better signal transfer. No sound from the monitor?

Check whether the system sound volume is set High or Low. Itll be mute if set so. Black and white pictures?

Night vision LED may be ON. Please turn on room lights to force it out of the night mode. Check whether the camera is near the monitor and Choppy videos?

that therere no obstacles between them. Adjust the monitor antenna to vertical position for better signal transfer. Too much noise?

Volume may be set too high. Press Menu Button ->

OK Button -> Left Button to volume down. The camera and monitor may be put too close; keep them at least 1.5m / 4.9ft apart. The camera may be too out of range. Please keep it within 10m / 32.8ft to the monitor. WARRANTY & CUSTOMER SERVICE 18 months warranty Lifetime customer service (contacts on the monitor, and back cover of this User Guide) 16 FCC STATEMENT changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 15.21& SAR statements This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The mobile device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under 17 this standard during product certification for use when properly worn on the body is 0.515 W/kg. For body operation, this device has been tested and meets FCC RF exposure guidelines when used with any accessory that contains no metal and that positions a minimum of 15mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. FCC 20cm Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 18 IC STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-ex-

empt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

1) L'appareil ne doit pas produire de brouillage;

2) L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 etla conformit l'exposition de RSS-102 rf, utilisa-

teurs peut obtenir l'information canadienne surl'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. 19 120*160mm 128 80

SUNVALLEYTEK INTERNATIONAL, INC. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AFDGVA-IH006A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name

(Block Diagram, Schematics, Operational (Block Diagram.pdf, Schematics.pdf, Description) Operational Description.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,

(signature) OSS ;

(printed name) Lion Liao Rev 11/20/07

SUNVALLEYTEK INTERNATIONAL, INC, Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: Mar. 14, 2019 SUBJECT: FCC Application for (FCC ID: 2AFDGVA-IH006A) To Whom It May Concern:

We, the undersigned, hereby authorize Alex feng at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, Guangdong, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Alex feng at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, Guangdong, China on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(signature) Sok

(printed name) Lion Liao xu\AppData\Local\ femp\360zip$ Temp\360$7\POA Letter-Camera.docx