www.taotronics.com TAOTRONICS LED DESK LAMP User Guide Product Diagram 1 Desk Lamp Lamp Head Night Light LampArm Tension Adjuster Power Port 5V/2A iSmart USB port Touch Panel WirelessCharging Pad Touch Panel Brightness Setting On / Off ColorTemperature ColorTemperature+
Favorite Timer Night Light 3 5 6 2 4 Package Contents 1 x TaoTronics LED Desk Lamp (Model:TT-DL050) 1 x Power Adapter 1 x Cleaning Cloth 1 x User Guide 8 7 Specifications Model Input USB Output LED Power Wireless Charging Output Color Temperature CRI TT-DL050 12V / 3A DC 5V / 2A 12W Max 7.5W for iphone Max / 10W for Samsung Max 2700-3000K, 3000-3500K, 4000-4500K, 5000-5500K,6000-6500K
>80 How to Use 1. On / Off The On / Off LED indicator will light up when the lamp is connected with power.Tap the button to turn on the lamp and the touch panel.Tap again to turn off.The TT-DL050 Desk Lamp includes a brightness and color temperature memory function; it will directly activate the previous settings each time its turnedon. 2. Brightness Adjustment Toadjust the brightness,tapor slide across the Brightness Setting icons from the left (least bright) to the right (most bright). 3. Color TemperatureAdjustment Press the button to go through the 5 levels of color temperature. The indicator will flash 3 times when it reaches the highest or the lowest setting. or 4. Timer Function When the lamp is on, tap the button and the indicator will slowly flashes 3 times to starttiming.The lamp will automatically turn off in 60 minutes.Tap again in timer mode to cancel the timer setting.The LED indicator will flash once. 5. Favorite Function When the lamp is on, tap and hold the indicator will flash 3 times and the current color temperature and brightness will be set as your favorite.Each time the lamp is turned on, tap on the button once to activate your favorite setting.Tap and hold again for 2 seconds to erase and set a new favorite. button for 2 seconds.The 6. Night Light Function When the lamp is on, tap the times to light up the night light.Tap either the to turn off the night light. In Night Light mode,tap the cancel the 60 minute timer. Note: The night light and main lamp will not light up at the same time. button until the indicator slowly flashes 3 button button to set or button or the 7. Wireless Charing Place your phone with wireless charging functionality onto the charging pad, charging will startautomatically. Note:
If charging does not occur, adjust the phone so its receiver can be detected. Please note that different model phones have their receivers in different positions. TT-DL050 Structural Parts www.taotronics.com NORTH AMERICA E-mail : support@taotronics.com(US) support.ca@taotronics.com(CA) Tel : 1-888-456-8468 (Monday-Friday: 9:00 17:00 PST) Address: 46724 Lakeview Blvd, Fremont, CA 94538 EUROPE E-mail:
support.uk@taotronics.com(UK) support.de@taotronics.com(DE) support.fr@taotronics.com(FR) support.es@taotronics.com(ES) support.it@taotronics.com(IT) EU Importer:ZBT InternationalTradingGmbH,Halstenbeker Weg98C, 25462 Rellingen,Deutschland ASIA PACIFIC E-mail : support.jp@taotronics.com(JP) JP Importer: SUNVALLEY JAPAN Tel 03-5542-02381018/
104-0032 PMOF MANUFACTURER Shenzhen NearbyExpress Technology Development Co.,Ltd. Address:333 Bulong Road,Shenzhen,China,518129 MADE IN CHINA The lamp head is 90 degrees rotatable to the left / right. The lower lamp arm is 90 degrees rotatable to the left / right on the base. The lower lamp arm is 90 degrees forward and 54 degrees backward rotatable. The upper lamp arm is 90 degrees forward rotatable. Caution Use only the supplied AC power adapter. Please do not dismantle the product by yourself, always ask professional electricians or authorized technicians for repair. If you smell bad odor or anything unusual, please turn off the unit immediately. Please do not remove the power plug with wet hands as it may cause electrical shock. Keep away from children. Donot putthis unit near extreme heat sources,moisture, or corrosive substances. Regularly clean thelamp. Please store in a dry and cool place if not using for a long period of time. Troubleshooting Guide Warranty Problem Possible Cause Solution TaoTronicsproducts are covered by a 12 month limited warranty from the date of its original purchase. If any problems occur, please contact our support team. We can only provide after sales service for products that are sold by TaoTronicsorTaoTronicsauthorized retailersand distributors.Ifyou have purchased your unit from a different place, please contact your seller for return and warrantyissues. No power supply The lamp does not light up The lamp is not turned on Correctly plug in the power adapter Referto the How to Use section Touch the panel with dry hands Hands are wet The touch panel is not responsive Voltage fluctuation causing panel failure Disconnect power to restart the lamp LED failure LED component failed Bad smell Power adapter failed Short circuit Please contact the TaoTronics Support Team Please contact the TaoTronics Support Team Please contact the TaoTronics Support Team FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.