www.suprema.co.kr BioStationT2 Innovative Fingerprint Terminal Installation Guide
(ver0.1) Product Contents n Basic Contents Product Contents Screw for fixing main body Terminal Wall mounting metal bracket Wallmounting screwsand holders-4 ea Ferrite Core Software CD 12V DC Adaptor Cables Copyright 2010Suprema Inc. 2 Product Contents n Optional accessories USB fingerprint scanner f or enrollmenton PC Wireless LAN Access Point Copyright 2010Suprema Inc. 3 Cable and Connector Pinout Relay RS485 PIN 1 2 3 PIN 1 2 3 4 PIN DESCRIPTION NORMAL OPEN COMMON NORMAL CLOSE PIN DESCRIPTION TRX -
TRX +
GND SHIELD GND Before Start Copyright 2010Suprema Inc. 4 Cable and Connector Pinout Switch Input VDP Wiegand PIN 1 2 3 4 5 6 7 8 PIN 1 2 3 4 5 6 7 PIN 1 2 3 4 PIN DESCRIPTION SHIELD_GND SWIN_IN0 SWIN_IN1 GND SWIN_IN2 SWIN_IN3 GND SHIELD_GND PIN DESCRIPTION VDP_S GND VDP_VCC VDP_V VDP_OPEN GND SHIELD_GND PIN DESCRIPTION WIEGAND_D0 WIEGAND_D1 GND SHIELD GND Before Start Copyright 2010Suprema Inc. 5 Installation Example PC Network HUB Ethernet 8P Cable 3P Cable Door Lock USB Firmware Upgrade Only USB Exit Button Copyright 2010Suprema Inc. 6 Product Dimension 160 160
(unit : mm) 7 Copyright 2010Suprema Inc. Power Connection n Power connection n Recommended l12V 10%, at least 1500mA for BioStationT2 alone installation. lComply with standard IEC/EN 60950-1 Copyright 2010Suprema Inc. 8 LAN Connection Copyright 2010Suprema Inc. 9 RS485 Network Connection Before Start Copyright 2010Suprema Inc. 10 Relay Connection Fail Safe Lock Copyright 2010Suprema Inc. 11 Relay Connection Fail Secure Lock Copyright 2010Suprema Inc. 12 Relay Connection -Automatic Door Copyright 2010Suprema Inc. 13 TTL Input Port Connection RTE Switches Copyright 2010Suprema Inc. 14 Wiegand Input Connection External reader Copyright 2010Suprema Inc. 15 System Specifications n n n n n n n n n n n n n n n n n n n n CPU :Main B/D CPU -ARM11 667MHz (Samsung S3C6410-667) X 1ea Sensor B/D CPU -DSP 400MHz (ADI BP531-400) X 1ea Memory : Main B/D -Flash : Nand MLC 1GByte + Nor 1MByte, SDRAM(mDDR) : 256MByte Sensor B/D -Flash : SPI 512Kbyte, SDRAM : 32MByte DISPLAY : 5inch WVGA TFT LCD (800 X 480) X 1ea LED : 3-Color LED X 2ea INPUT : Touch Screen X 1ea + 5 Keypad (F1~F4, CALL) CAMERA : 1.3M CMOS Camera X 1ea I/O Port : Wiegand In/Out (S/W Input Output ) X 1ch Switch Input X 4ch RS-485 X 2ch RS-232(Share with RS-485) X 1ch Relay(1A@30Vdc) X 2ch Ethernet(10/100M) X 1ch Sound Out: System Sound Speaker X 2ea RF CARD : Mifare / EM Fingerprint Sensor : OC Sensor Model Power Input : 12Vdc Adaptor or POE Input Copyright 2010Suprema Inc. 16 FCC Rules Caution Warning Information to User Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and
(2) this device must accept any interface received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures:
1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help Copyright 2010Suprema Inc. 17 Electrical Specification Min. Typ. Max. Notes Power Voltage (V) Current (mA) TTL/Wiegand Input VIH (V) VIL (V) Pull-up resistance () TTL/Wiegand Output VOH (V) VOL (V) Output resistance () Relay Switching capacity (A) Switching power
(resistive) Switching voltage (V) 10.8
2
4
12 600
10k
100
13.2 1000
0.8
1
@ IOH = -5mA
@ IOL = 5mA 1 0.3 30W 37.5VA 110 125 30V DC 125V AC DC AC DC AC Copyright 2010Suprema Inc. 18 16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Suprema Inc. Seongnam, Gyeonggi, 463-863 Korea E-mail : support@supremainc.com Website : www.supremainc.com Functions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.