FCC ID: 2AVEIJERNANO-F4113 Carbon Nanotube Heating Film

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. iwarm 3.0 uses soft,thin material as the core heating material,which converts electricity quickly into heat energy through efficient electrothermal conversion. I.Features of iwarm 3.0 1. Driving force:5V,high safety factor(<36V);

2. Planar heating, even heating, fast heating,comfortable;

3. The far-infrared wavelength emitted by iwarm 3.0 is very close to the human body;

4. Realize intelligent and touch-tune control mode, meet the requirements of different people and different temperatures in different environments. II.About products 1.Product photos 2.Bluetooth function Connect the USB connector to the 5V / 2A mobile power interface, long-perss the controller, let the Bluetooth light flashing, Controller enters Bluetooth connection status. 3.Using steps

(1). Download and install app for mobile phone.

(2). Install the APP, open your phone Bluetooth, enter the software interface and long-perss the controller, let the Bluetooth light flashing, click on the + to add intelligent wearing, then you can work on the iwarm 3.0 independently III.Controller Control lamp condition Red light long bright Orange light long bright White light long bright Controller usage guide Output level High level Middle level Low level Red light flashing Heating sheet reaches setting high level temperature Orange light flashing Heating sheet reaches setting middle level temperature White light flashing Heating sheet reaches setting low level temperature Bluetooth light flashing Open your phone bluetooth,the controller and your phone must in 2 meters,then connect APP Purple/red light fast flashing The master controller is wrong,please connect with manufacturer IV.Product description 1. Heating clothes are prohibited from dry cleaning. They can be washed by machine or hand at room temperature. After washing, they need to be fully dried before they can be used again. 2. Strictly forbidden to charge and discharge on the edge of mobile power supply. 3. Please turn off or remove the mobile power when not use. Avoid heating when not dress, Forbid using sleep. V.Product parameters Name: iwarm 3.0 One piece size:180mm*300mm Three piece size:150mm*220mm*1P+150mm*120mm*2P Using temperature:-20 to 70 Using relative humidity:85RH%

VI.Disabled groups

*Infants and without self-care ability;

*Careful use of pregnant women VII.Product packing configuration 1. 1 set Heating component;

2. 1 copy instruction manual;

3. 1 tag.

[Warranty terms]

1. From the date of saling. Free warranty within one year(not-human damage);

2. The following cases are not in the warranty scope: beyond the scope of attention, improper use, self-repair or man-made sabotage(including misoperation),and use the product for other purpose beyond the scope,etc. 3. Within the scope of the law, our company reserves the right of modification and final interpretation of the warranty;

4. The provisions of laws and regulations are clearly defined and enforced.

FCC ID: 2AVEIJERNANO-F4113 This device complies with Part of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference.and

(2)this device must accept any interference received, including interference that may cause undesired operation. Label location

Suzhou Jernano Carbon Co.,Ltd. Date: 2019-12-30 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC /D: 2AVEIJERNANO-F4113 To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Suzhou Jernano Carbon Co.,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Wang Xiangrui Title: R&D Signature: Wan meses On behalf of Company: Suzhou Jernano Carbon Co.,Ltd. Telephone: 0512-62872764

Suzhou Jernano Carbon Co.,Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Suzhou Jernano Carbon Co.,Ltd. NO.398 Ruoshui Road, Suzhou Industrial Park, China Regarding: Confidentiality Request regarding application for FCC ID: 2AVEIJERNANO-F4113 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: We Kbangynt Printed Name (on file with the FCC associated with the Grantee Code): Wang Xiangrui Title: R&D Company Name: Suzhou Jernano Carbon Co.,Ltd.