FCC ID: 2ACCJB118 LTE/UMTS/GSM Smartphone

Safety and Precautions This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio waves section. www.sar-tick.com When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. English - CQF1S31ALAAA Printed in China Safety and use We recommend that you read this chapter carefully before using your phone. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY:

Given that studies show that using a phone while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset...), drivers are requested to refrain from using their phone when the vehicle is not parked. Check the laws and regulations on the use of wireless phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE:

You are advised to switch off the phone from time to time to optimize its performance;

Remember to abide by local authority rules of mobile phone use on aircrafts;

Disassembling the phone can cause bodily injury if the battery is punctured;

Always handle your phone with care and keep it in a clean and dust-free place;

If your phone is a unibody device, where the back cover and battery are not removable, disassembling the phone will void your warranty. Do not allow your phone to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturers recommended operating temperature range is -10C (14F) to +45C (113F). At over 45C (113F), the legibility of the phones display may be temporarily impaired;

Do not open, dismantle, or attempt to repair your phone yourself;

Do not drop, throw, or bend your phone;

1 Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and are compatible with your phone model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries;

Your phone should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products;

Remember to make backup copies or keep a written record of all important information stored on your phone;

Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone;

Parents should monitor their childrens use of video games or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. PRIVACY:

Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your phone regarding taking photographs and recording sounds with your phone. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your phone (including the carrier) disclaim any liability which may result from improper use of the phone. 2 BATTERY:

For a non-unibody device:

Observe the following precautions:

Do not attempt to open the battery (due to the risk of toxic fumes and burns);

Do not puncture, disassemble, or cause a short circuit in the battery;

Do not burn or dispose of a used battery in household garbage or store it at temperatures above 60C (140F). Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication Ltd. and/or its affiliates. For a non-unibody device with a non-removable battery:

Observe the following precautions:

Do not attempt to eject, replace, or open the battery;

Do not puncture, disassemble, or cause a short circuit in the battery;

Do not burn or dispose of your phone in household garbage or store it at temperature above 60C (140F). Phone and battery must be disposed of in accordance with locally applicable environmental regulations. For a unibody device:

Observe the following precautions:

Do not attempt to open the back cover;

Do not attempt to eject, replace, or open the battery;

3 Do not puncture the back cover of your phone;

Do not burn or dispose of your phone in household rubbish or store it at temperature above 60C (140F);

Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. This symbol on your phone, the battery, and the accessories means that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these types of equipment;

Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:

These collection points are accessible free of charge. All products with this sign must be brought to these collection points. In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. In the United States you may learn more about CTIAs Recycling Program at http://www.gowirelessgogreen.org/

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 4 CHARGERS:

Home A.C./ Travel chargers will operate within the temperature range of: 0C (32F) to 40C (104F). The chargers designed for your phone meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. Characteristics of power supply (depending on the country):

Travel charger: Input: 100-240V,50/60Hz, 0.35A Battery:

Output:5V, 2A Lithium 4000 mAh Radio waves THIS PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada (ISEDC), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. 5 This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/

oet/ea/fccid after searching on FCC ID : 2ACCJB118 Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone. Before a phone model is available for sale to the public, compliance with national regulations and standards must be shown. The highest SAR value for 5030J when tested is 1.34 W/Kg for use at the ear and 1.23 W/Kg for use close to the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for RF exposure. For body-worn operation, the phone meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 10 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.ctia.org/

The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of phones. If individuals are concerned, they may choose to limit their own or their childrens RF exposure by limiting the length of calls, or using hands-

free devices to keep phones away from the head and body. Additional WHO information about electromagnetic fields and public health are available on the following website: http://www.who.int/peh-emf. 6 Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:

This phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your phone is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with a headset or usb data cable. If you are using another accessory ensure that whatever product is used is free of any metal and that it positions the phone at least 10 mm away from the body. 7 Please note by using the device some of your personal data may be shared with the main device. It is under your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products with Wi-Fi features, only connect to trusted Wi-Fi networks. Also when using your product as a hotspot (where available), use network security. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various locations including a SIM card, memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and install from trusted sources only. Some apps can impact your products performance and/or have access to private information including account details, call data, location details and network resources. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against unauthorized or unlawful processing and accidental loss or destruction of or damage to such personal data whereby the measures shall provide a level of security that is appropriate having regard to The technical possibilities available;

The costs for implementing the measures;

The risks involved with the processing of the personal data, and;

The sensitivity of the personal data processed. You can access, review, and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request. 8 Licenses microSD Logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and its affiliates is under licence. Other trademarks and trade names are those of their respective owners. Alcatel 5030J Bluetooth Declaration ID D043603 The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Google, the Google logo, Android, the Android logo, Google Search TM, Google Maps TM, Gmail TM, YouTube, Google Play Store, and Hangouts TM are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will show when you touch Google legal in Settings > About phone > Legal information) (1). You have purchased a product which uses the open source (http://opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code and other open source programs licensed under the GNU General Public Licence and Apache Licence. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCL Communication Ltd. You may download the source codes from http://sourceforge.net/projects/alcatel/files/. The provision of the source code is free of charge from the internet.

(1) May not be available in all countries. 9 Hearing Aid Compatibility FCC ID : 2ACCJB118 Your mobile phone is rated: For Hearing Aid, to assist hearing device users in finding mobile phones that may be compatible with their hearing devices. This device is HAC M3 compatible. Reference ANSI C63.19-2011 For more information please visit our website http://www.alcatelonetouch.us General information Internet address: www.alcatelmobile.com Hotline: See the "SERVICES" leaflet that came with your phone or go to our website. Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Electronic labeling path: Touch Settings > Regulatory & safety or press *#07# to find more information about labeling (1), such as FCC ID. On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by email to ask any questions you may have. Your phone is a transceiver that operates on GSM in quad-band (850/900/1800/1900 MHz), UMTS in penta-band (B1/2/4/5/8), LTE (B2/4/7/28). Protection against theft (2)

(1) This may vary depending on country.

(2) Contact your service provider to check service availability. 10 Your phone is identified by an IMEI (phone serial number) shown on the packaging label and in the phones memory. We recommend that you note the number the first time you use your phone by entering *#06# and keep it in a safe place. It may be requested by the police or your carrier if your phone is stolen. This number allows your phone to be blocked preventing a third person from using it, even with a different SIM card. Disclaimer There may be certain differences between the user manual description and the phones operation, depending on the software release of your phone or specific carrier services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the carrier exclusively. Warranty Your phone is warranted against any defect or malfunctioning which may occur in conditions of normal use during the warranty period of twelve (12) months (1) from the date of purchase as shown on your original invoice. Batteries (2) and accessories sold with your phone are also warranted against any defect which may occur during the first six (6) months (1) from the date of purchase as shown on your original invoice. In case of any defect of your phone which prevents you from normal use thereof, you must immediately inform your vendor and present your phone with your proof of purchase.

(1) The warranty period may vary depending on your country.

(2) The life of a rechargeable phone battery in terms of conversation time, standby time and total service life, will depend on the conditions of use and network configuration. Batteries being considered expendable supplies, the specifications state that you should obtain optimal performance for your phone during the first six months after purchase and for approximately 200 more recharges. 11 If the defect is confirmed, your phone or part thereof will be either replaced or repaired, as appropriate. Repaired phone and accessories are entitled to a one (1) month warranty for the same defect. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the cost of parts and labor but excludes any other costs. This warranty shall not apply to defects to your phone and/or accessory due to (without any limitation):

- Non-compliance with the instructions for use or installation, or with technical and safety standards applicable in the geographical area where your phone is used;

oxidation

- Connection to any equipment not supplied or not recommended by TCL Communication Ltd.;

- Modification or repair performed by individuals not authorised by TCL Communication Ltd. or its affiliates or your vendor;

- Modification, adjustment or alteration of software or hardware performed by individuals not authorised by TCL Communication Ltd.;

- Inclement weather, lightning, fire, humidity, infiltration of liquids or foods, chemical products, download of files, crash, high voltage, corrosion, Your phone will not be repaired in case labels or serial numbers (IMEI) have been removed or altered. There are no express warranties, whether written, oral or implied, other than this printed limited warranty or the mandatory warranty provided by your country or jurisdiction. In no event shall TCL Communication Ltd. or any of its affiliates be liable for indirect, incidental or consequential damages of any nature whatsoever, including but not limited to commercial or financial loss or damage, loss of data or loss of image to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of indirect, incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. 12

Safety and Precautions This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio waves section. www.sar-tick.com When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. English - CQF1S31ALAAA Printed in China Safety and use We recommend that you read this chapter carefully before using your phone. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY:

Given that studies show that using a phone while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset...), drivers are requested to refrain from using their phone when the vehicle is not parked. Check the laws and regulations on the use of wireless phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE:

You are advised to switch off the phone from time to time to optimize its performance;

Remember to abide by local authority rules of mobile phone use on aircrafts;

Disassembling the phone can cause bodily injury if the battery is punctured;

Always handle your phone with care and keep it in a clean and dust-free place;

If your phone is a unibody device, where the back cover and battery are not removable, disassembling the phone will void your warranty. Do not allow your phone to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturers recommended operating temperature range is 0C (32F) to +40C (104F). At over 40C (104F), the legibility of the phones display may be temporarily impaired;

Do not open, dismantle, or attempt to repair your phone yourself;

Do not drop, throw, or bend your phone;

1 Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and are compatible with your phone model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries;

Your phone should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products;

Remember to make backup copies or keep a written record of all important information stored on your phone;

Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person never had a previous seizure or blackout. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone;

Parents should monitor their childrens use of video games or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. PRIVACY:

Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your phone regarding taking photographs and recording sounds with your phone. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your phone (including the carrier) disclaim any liability which may result from improper use of the phone. 2 BATTERY:

For a non-unibody device:

Observe the following precautions:

Do not attempt to open the battery (due to the risk of toxic fumes and burns);

Do not puncture, disassemble, or cause a short circuit in the battery;

Do not burn or dispose of a used battery in household garbage or store it at temperatures above 60C (140F). Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication Ltd. and/or its affiliates. For a non-unibody device with a non-removable battery:

Observe the following precautions:

Do not attempt to eject, replace, or open the battery;

Do not puncture, disassemble, or cause a short circuit in the battery;

Do not burn or dispose of your phone in household garbage or store it at temperature above 60C (140F). Phone and battery must be disposed of in accordance with locally applicable environmental regulations. For a unibody device:

Observe the following precautions:

Do not attempt to open the back cover;

Do not attempt to eject, replace, or open the battery;

3 Do not puncture the back cover of your phone;

Do not burn or dispose of your phone in household rubbish or store it at temperature above 60C (140F);

Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. This symbol on your phone, the battery, and the accessories means that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these types of equipment;

Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:

These collection points are accessible free of charge. All products with this sign must be brought to these collection points. In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. In the United States you may learn more about CTIAs Recycling Program at http://www.gowirelessgogreen.org/

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 4 CHARGERS:

Home A.C./ Travel chargers will operate within the temperature range of: 0C (32F) to 40C (104F). The chargers designed for your phone meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. Characteristics of power supply (depending on the country):

Travel charger: Input: 100-240V,50/60Hz, 0.35A Battery:

Output:5V, 2A Lithium 4000 mAh Radio waves THIS PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada (ISEDC), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. 5 This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/

oet/ea/fccid after searching on FCC ID : 2ACCJB118 Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone. Before a phone model is available for sale to the public, compliance with national regulations and standards must be shown. The highest SAR value for 5030J when tested is 1.34 W/Kg for use at the ear and 1.23 W/Kg for use close to the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for RF exposure. For body-worn operation, the phone meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 10 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.ctia.org/

The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of phones. If individuals are concerned, they may choose to limit their own or their childrens RF exposure by limiting the length of calls, or using hands-

free devices to keep phones away from the head and body. Additional WHO information about electromagnetic fields and public health are available on the following website: http://www.who.int/peh-emf. 6 Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:

This phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference;

This device must accept any interference received, including interference that may cause undesired operation. Your phone is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with a headset or usb data cable. If you are using another accessory ensure that whatever product is used is free of any metal and that it positions the phone at least 10 mm away from the body. 7 Please note by using the device some of your personal data may be shared with the main device. It is under your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products with Wi-Fi features, only connect to trusted Wi-Fi networks. Also when using your product as a hotspot (where available), use network security. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various locations including a SIM card, memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and install from trusted sources only. Some apps can impact your products performance and/or have access to private information including account details, call data, location details and network resources. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against unauthorized or unlawful processing and accidental loss or destruction of or damage to such personal data whereby the measures shall provide a level of security that is appropriate having regard to The technical possibilities available;

The costs for implementing the measures;

The risks involved with the processing of the personal data, and;

The sensitivity of the personal data processed. You can access, review, and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request. 8 Licenses microSD Logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and its affiliates is under licence. Other trademarks and trade names are those of their respective owners. Alcatel 5030M Bluetooth Declaration ID D043603 The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Google, the Google logo, Android, the Android logo, Google Search TM, Google Maps TM, Gmail TM, YouTube, Google Play Store, and Hangouts TM are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will show when you touch Google legal in Settings > About phone > Legal information) (1). You have purchased a product which uses the open source (http://opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code and other open source programs licensed under the GNU General Public Licence and Apache Licence. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCL Communication Ltd. You may download the source codes from http://sourceforge.net/projects/alcatel/files/. The provision of the source code is free of charge from the internet.

(1) May not be available in all countries. 9 Hearing Aid Compatibility FCC ID : 2ACCJB118 Your mobile phone is rated: For Hearing Aid, to assist hearing device users in finding mobile phones that may be compatible with their hearing devices. This device is HAC M3 compatible. Reference ANSI C63.19-2011 For more information please visit our website http://www.alcatelonetouch.us General information Internet address: www.alcatelmobile.com Hotline: See the "SERVICES" leaflet that came with your phone or go to our website. Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Electronic labeling path: Touch Settings > Regulatory & safety or press *#07# to find more information about labeling (1), such as FCC ID. On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by email to ask any questions you may have. Your phone is a transceiver that operates on GSM in quad-band (850/900/1800/1900 MHz), UMTS in penta-band (B1/2/4/5/8), LTE (B2/4/7/28). Protection against theft (2)

(1) This may vary depending on country.

(2) Contact your service provider to check service availability. 10 Your phone is identified by an IMEI (phone serial number) shown on the packaging label and in the phones memory. We recommend that you note the number the first time you use your phone by entering *#06# and keep it in a safe place. It may be requested by the police or your carrier if your phone is stolen. This number allows your phone to be blocked preventing a third person from using it, even with a different SIM card. Disclaimer There may be certain differences between the user manual description and the phones operation, depending on the software release of your phone or specific carrier services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the carrier exclusively. Warranty Your phone is warranted against any defect or malfunctioning which may occur in conditions of normal use during the warranty period of twelve (12) months (1) from the date of purchase as shown on your original invoice. Batteries (2) and accessories sold with your phone are also warranted against any defect which may occur during the first six (6) months (1) from the date of purchase as shown on your original invoice. In case of any defect of your phone which prevents you from normal use thereof, you must immediately inform your vendor and present your phone with your proof of purchase.

(1) The warranty period may vary depending on your country.

(2) The life of a rechargeable phone battery in terms of conversation time, standby time and total service life, will depend on the conditions of use and network configuration. Batteries being considered expendable supplies, the specifications state that you should obtain optimal performance for your phone during the first six months after purchase and for approximately 200 more recharges. 11 If the defect is confirmed, your phone or part thereof will be either replaced or repaired, as appropriate. Repaired phone and accessories are entitled to a one (1) month warranty for the same defect. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the cost of parts and labor but excludes any other costs. This warranty shall not apply to defects to your phone and/or accessory due to (without any limitation):

- Non-compliance with the instructions for use or installation, or with technical and safety standards applicable in the geographical area where your phone is used;

oxidation

- Connection to any equipment not supplied or not recommended by TCL Communication Ltd.;

- Modification or repair performed by individuals not authorised by TCL Communication Ltd. or its affiliates or your vendor;

- Modification, adjustment or alteration of software or hardware performed by individuals not authorised by TCL Communication Ltd.;

- Inclement weather, lightning, fire, humidity, infiltration of liquids or foods, chemical products, download of files, crash, high voltage, corrosion, Your phone will not be repaired in case labels or serial numbers (IMEI) have been removed or altered. There are no express warranties, whether written, oral or implied, other than this printed limited warranty or the mandatory warranty provided by your country or jurisdiction. In no event shall TCL Communication Ltd. or any of its affiliates be liable for indirect, incidental or consequential damages of any nature whatsoever, including but not limited to commercial or financial loss or damage, loss of data or loss of image to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of indirect, incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. 12

QUICK START GUIDE SAVE PAPER SAVE TREES PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING us.alcatelmobile.com English - CJB1S31ALAAA Printed in China Your Mobile Keys and connectors Headset connector The Google Assistant Button Back button Micro-USB connector 1 Flash Front camera Volume up/down Power key Recent button Home button Back camera Back flash Fingerprint 2 Getting started 1 Charge the battery 2 Insert or remove the microSD card. 3 Insert or remove the SIM card. 1 2 3 3 Home screen You can bring all of the items (applications, shortcuts, folders, and widgets) that you use most frequently to your Home screen for quick access. Touching the Home button always takes you back to the main Home screen. 1 2 4 1 : With the notification panel open, tap the top of the screen again and drag down to see the Quick Settings menu. 2 : Tap to access the complete Settings menu. Phone call Making a call Enter the desired number from the keyboard and touch to make a call. Answering a call When you receive a call, swipe up to answer or swipe down to reject:

1 5 1 : Reject by SMS Contacts You can view and create contacts on your phone and synchronize these with your Gmail contacts or other applications on the web or on your phone. 1 : Search in Contacts 2 : View your favorites 3 : Open the Quick contact panel Long press to select contact(s) to delete 4 : Add new contact 1 2 3 4 6 Messaging You can create, edit, and receive SMS and MMS. An SMS will be converted to MMS automatically when media files (image, video, audio, slides, etc.) are attached or subject or email addresses are added. 1 2 7 1 : Send the text message 2 : Insert emoticons Gmail The first time you set up your phone, you can select to use an existing Gmail account or to create a new one. 1 : Filter starred emails 2 : See options and settings 3 : Swipe left or right to archive the email 4 : Create an email 1 2 3 4 8 Help To get help:

View user manual and FAQ www.alcatelmobile.com Update your phone's software Go to Settings > System > System update to check software updates. Back up your personal data Go to Settings > System > Backup > Back up to Google Drive and turn it on. Reset your phone Go to Settings > System > Reset options >

Erase all data (factory reset), and then touch to reset you Phone. 9 Support 1. Enter from your Smartphone / Tablet to the application: SUPPORT CENTER 2. Check our frequently asked questions or chat with us through https://www. alcatelmobile.com in the Support section. 3. Call the Call Center Locate your number, below:

Argentina- 0800-444-7361 Australia- 1-800-218-730 Canada- 1-855-844-6058 Chile- 123-002-09025 Colombia- 01-800-518-3882 Ecuador- 800-000-635 Mexico- 01-800-112-4682 Nueva Zealanda- 800-451-708 Peru- 0800-55-639 Rep. Dominicana- 1-800-203-9679 Uruguay- 000-401-90752 USA- 1-855-368-0829 Venezuela- 0800-136-2017 10

QUICK START GUIDE SAVE PAPER SAVE TREES PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING us.alcatelmobile.com English - CJB1S31ALAAA Printed in China M Your Mobile Keys and connectors Headset connector The Google Assistant Button Back button Micro-USB connector 1 Front camera Volume up/down Power key Recent button Home button Back camera Back flash Fingerprint 2 Getting started 1 Charge the battery. 2 Insert or remove the microSD card. 3 Insert or remove the SIM card. 1 2 3 3 Home screen You can bring all of the items (applications, shortcuts, folders, and widgets) that you use most frequently to your Home screen for quick access. Touching the Home button always takes you back to the main Home screen. 1 2 4 1 : With the notification panel open, tap the top of the screen again and drag down to see the Quick Settings menu. 2 : Tap to access the complete Settings menu. Phone call Making a call Enter the desired number from the keyboard and touch to make a call. Answering a call When you receive a call, swipe up to answer or swipe down to reject:

1 5 1 : Reject by SMS Contacts You can view and create contacts on your phone and synchronize these with your Gmail contacts or other applications on the web or on your phone. 1 : Search in Contacts 2 : View your favorites 3 : Open the Quick contact panel Long press to select contact(s) to delete 4 : Add new contact 1 2 3 4 6 Messaging You can create, edit, and receive SMS and MMS. An SMS will be converted to MMS automatically when media files (image, video, audio, etc.) are attached or email addresses are added. 1 2 7 1 : Send the text message 2 : Insert emoticons Gmail The first time you set up your phone, you can select to use an existing Gmail account or to create a new one. 1 : Manage accounts 2 : See options and settings 3 : Swipe left or right to archive the email 4 : Create an email 1 2 3 4 8 Help To get help:

View user manual and FAQ www.alcatelmobile.com Update your phone's software Go to Settings > System > System update to check software updates. Back up your personal data Go to Settings > System > Advanced>

Backup > Back up to Google Drive and turn it on. Reset your phone Go to Settings > System > Advanced

>Reset options > Erase all data (factory reset), and then touch to reset you Phone. 9 Support 1. Check our frequently asked questions or chat with us through https://www. alcatelmobile.com in the Support section. 2. Call the Call Center Locate your number, below:

Australia- 1-800-218-730 Canada- 855-844-6058 Colombia- 1-800-518-3882 Ecuador- 800-000-635 Mexico- 800-112-4682 New Zealand- 080-045-1708 Peru- 800-55-639 Dominican Republic- 1-800-203-9552 USA- 1-855-368-0829 Venezuela- 800-136-2017 10

Safety and Precautions English - CQF2GL0ALAAA M www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the Radio waves section. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. 1 Safety and use We recommend that you read this chapter carefully before using your phone. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. TRAFFIC SAFETY:

Given that studies show that using a phone while driving a vehicle constitutes a real risk, even when the hands-free kit is used (car kit, headset, etc.), drivers are requested to refrain from using their phone when the vehicle is not parked. Check the laws and regulations on the use of wireless phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. CONDITIONS OF USE:

You are advised to switch off the phone from time to time to Remember to abide by local authority rules of mobile phone optimize its performance. use on aircrafts. If your phone is a unibody device, where the back cover and battery are not removable, disassembling the phone will void your warranty. Disassembling the phone can cause bodily injury if the battery is punctured. Always handle your phone with care and keep it in a clean and dust-free place. Do not allow your phone to be exposed to adverse weather or environmental conditions, such as moisture, humidity, rain, infiltration of liquids, dust, sea air, etc. The manufacturers recommended operating temperature range is 0C (32F) to +40C (104F). At over 40C (104F), the legibility of the phones display may be temporarily impaired. Do not open, dismantle, or attempt to repair your phone yourself. Do not drop, throw, or bend your phone. Use only batteries, battery chargers, and accessories which are recommended by TCL Communication Ltd. and its affiliates and which are compatible with your phone model. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries. Your phone should not be disposed of in a municipal waste. Please check local regulations for disposal of electronic products. Remember to make backup copies or keep a written record of all important information stored on your phone. Some people may suffer epileptic seizures or blackouts when exposed to flashing lights, or when playing video games. These seizures or blackouts may occur even if a person has never experienced them before. If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult your doctor before playing video games on your phone or enabling a flashing-lights feature on your phone. Parents should monitor their childrens use of video games or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, orientation, or movements. 2 PRIVACY:

Please note that you must respect the laws and regulations in force in your jurisdiction or other jurisdiction(s) where you will use your phone regarding taking photographs and recording sounds with your phone. Pursuant to such laws and regulations, it may be strictly forbidden to take photographs and/or to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy. It is the user's sole responsibility to ensure that prior authorization has been obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your phone (including the carrier) disclaim any liability which may result from improper use of the phone. BATTERY:

For a non-unibody device:

Observe the following precautions:

Do not attempt to open the battery (due to the risk of toxic Do not puncture, disassemble, or cause a short circuit in the fumes and burns). battery. Do not burn or dispose of a used battery in household garbage or store it at temperatures above 60C (140F). Batteries must be disposed of in accordance with locally applicable environmental regulations. Only use the battery for the purpose for which it was designed. Never use damaged batteries or those not recommended by TCL Communication Ltd. and/

or its affiliates. For a non-unibody device with a non-removable battery:

Observe the following precautions:

Do not attempt to eject, replace, or open the battery. Do not puncture, disassemble, or cause a short circuit in the battery. Do not burn or dispose of your phone in household garbage or store it at temperature above 60C (140F). Phone and battery must be disposed of in accordance with locally applicable environmental regulations. For a unibody device:

Observe the following precautions:

Do not attempt to open the back cover. Do not attempt to eject, replace, or open the battery. Do not puncture the back cover of your phone. Do not burn or dispose of your phone in household rubbish or store it at temperature above 60C (140F). Phone and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations. This symbol on your phone, the battery, and the accessories means that these products must be taken to collection points at the end of their life:

Municipal waste disposal centers with specific bins for these types of equipment. Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries:

These collection points are accessible free of charge. All products with this sign must be brought to these collection points. 3 In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for them to be recycled. In the United States you may learn more about CTIAs Recycling Program at http://www.gowirelessgogreen.org/

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CHARGERS:

Home A.C./ Travel chargers will operate within the temperature range of: 0C (32F) to 40C (104F). The chargers designed for your phone meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for the purpose of charging only. Characteristics of power supply (depending on the country):

Travel charger: Input: 100-240V,50/60Hz, 500mA Battery:

Output: 5V, 2A Lithium 4000mAh Radio waves THIS PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. The exposure standard for phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada (ISEDC), is 1.6 W/kg averaged over 1 gram of body tissue. Tests for SAR are conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. This device is complied with SAR for general population /

uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. 4 The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID : 2ACCJB118 Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the phone. Before a phone model is available for sale to the public, compliance with national regulations and standards must be shown. The highest SAR value for this model phone when tested is 1.34 W/Kg for use at the ear and 1.23 W/Kg for use close to the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for RF exposure. For body-worn operation, the phone meets FCC RF exposure guidelines provided that it is used with a non-metallic accessory with the handset at least 10 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:

http://www.ctia.org/

The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of phones. If individuals are concerned, they may choose to limit their own or their childrens RF exposure by limiting the length of calls, or using hands-free devices to keep phones away from the head and body. Additional WHO information about electromagnetic fields and public health is available on the following website: http://www.who.int/peh-emf. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement:

This phone complies with Part 15 of the FCC Rules. 5 Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Your phone is equipped with a built-in antenna. For optimal operation, you should avoid touching it or degrading it. As mobile devices offer a range of functions, they can be used in positions other than against your ear. In such circumstances the device will be compliant with the guidelines when used with a headset or usb data cable. If you are using another accessory ensure that whatever product is used is free of any metal and that it positions the phone at least 10 mm away from the body. Please note that when using an accessory some of your personal data may be shared with the main device. It is your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or third party devices connected to yours. For products with Wi-Fi features, only connect to trusted Wi-Fi networks. Also when using your product as a hotspot (where available), use network security. These precautions will help prevent unauthorized access to your device. Your product can store personal information in various locations including a SIM card, memory card, and built-in memory. Be sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and only install them from trusted locations. Some apps can impact your products performance and/or have access to private information including account details, call data, location details and network resources. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd. implements and maintains appropriate technical and organizational measures to protect all personal data, for example against unauthorized or unlawful processing and accidental loss, destruction or damage, whereby the measures shall provide a level of security that is appropriate with regard to:

the technical possibilities available;

the costs for implementing the measures;

the risks involved with the processing of the personal data; and the sensitivity of the personal data processed. You can access, review, and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request. 6 Licenses microSD Logo is a trademark. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and its affiliates is under licence. Other trademarks and trade names are those of their respective owners. TCL 4187M Bluetooth Declaration ID D043603 The Wi-Fi Logo is a certification mark of the Wi-Fi Alliance. Google, the Google logo, Android, the Android logo, Google SearchTM, Google MapsTM, GmailTM, YouTube, Google Play Store, Google LatitudeTM, and HangoutsTM are trademarks of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License (the text will appear when you touch Google legal in Settings > System >

About phone > Legal information) (1). You have purchased a product which uses the open source

(http://opensource.org/) programs mtd, msdosfs, netfilter/iptables and initrd in object code and other open source programs licensed under the GNU General Public Licence and Apache Licence. We will provide you with a complete copy of the corresponding source codes upon request within a period of three years from the distribution of the product by TCL Communication Ltd. You may download the source codes from https://sourceforge.net/

projects/tcl-mobile/files/. The provision of the source code is free of charge from the internet. US Information Concerning the Federal Communications Commission

(FCC) Requirements for Hearing Aid Compatibility with Wireless Devices When wireless devices are used near hearing devices (such as hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference, and wireless devices also vary in the amount of interference that they generate. The wireless telephone industry has developed ratings to assist hearing device users in finding wireless devices that may be compatible with their hearing devices. Not all wireless devices have been rated. Wireless devices that are rated will have the rating displayed on the box together with other relevant approval markings. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device is vulnerable to interference, you may not be able to use a rated wireless device successfully. Consulting with your hearing health professional and testing the wireless device with your hearing device is the best way to evaluate it for your personal needs.

(1) May not be available in all countries. 7 This smartphone has been tested and rated for use with hearing aids for some of the wireless technologies that the smartphone uses. However, other wireless technologies may be used in this smartphone that have not been tested for use with hearing aids. It is important to try the different features of your smartphone thoroughly and in different locations to determine if you hear any interfering noise when using this smartphone with your hearing aid or cochlear implant. Consult your wireless service provider about its return and exchange policies, and for information about hearing aid compatibility. Hearing aid compatibility rating for this smartphone: M3 only. How the ratings work M-Ratings: Wireless devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than wireless devices that are not labeled. M4 is the better or higher of the two ratings. Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from wireless devices. For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and other steps that the FCC has taken to ensure that individuals with disabilities have access to telecommunications services, visit www.fcc.gov/cgb/dro. FCC ID: 2ACCJB118 a) 20.19(f)(1): an explanation of the ANSI C63.19 rating system. b) 20.19(f)(2)(i) specified disclosure for handsets certified under ANSI C63.19 and not tested for T-Coil operations in accordance with the guidance issued by OET in KDB Publication 285076 D02 will require disclosure that the handset does not meet the relevant rating(s) with respect to such operation(s). 8 General information Internet address: https://www.tcl.com/mx/es.html Manufacturer: TCL Communication Ltd. Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Electronic labeling path: Touch Settings > System >

Regulatory & safety or press *#07# to find more information about labeling (1), such as FCC ID. On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by email to ask any questions you may have. Your phone is a transceiver that operates on GSM in quad-band

(850/900/1800/1900 MHz), UMTS in penta-band (B1/2/4/5/8) or LTE (B2/4/7/28). Protection against theft (2) Your phone is identified by an IMEI (phone serial number) shown on the packaging label and in the phones memory. We recommend that you note the number the first time you use your phone by entering *#06# and keep it in a safe place. It may be requested by the police or your carrier if your phone is stolen. This number allows your phone to be blocked preventing a third person from using it, even with a different SIM card. Disclaimer There may be certain differences between the user manual description and the phones operation, depending on the software release of your phone or specific carrier services. TCL Communication Ltd. shall not be held legally responsible for such differences, if any, nor for their potential consequences, which responsibility shall be borne by the carrier exclusively.

(1) This may vary depending on country.

(2) Contact your service provider to check service availability. 9 Warranty Your phone is warranted against any defect or malfunctioning which may occur in conditions of normal use during the warranty period of twelve (12) months (1) from the date of purchase as shown on your original invoice. Batteries (2) and accessories sold with your phone are also warranted against any defect which may occur during the first six (6) months (1) from the date of purchase as shown on your original invoice. In case of any defect of your phone which prevents you from normal use thereof, you must immediately inform your vendor and present your phone with your proof of purchase. If the defect is confirmed, your phone or part thereof will be either replaced or repaired, as appropriate. Repaired phones and accessories are entitled to a one (1) month warranty for the same defect. Repair or replacement may be carried out using reconditioned components offering equivalent functionality. This warranty covers the cost of parts and labor but excludes any other costs. This warranty shall not apply to defects to your phone and/or accessory due to (without any limitation):

- Non-compliance with the instructions for use or installation, or with technical and safety standards applicable in the geographical area where your phone is used.

- Connection to any equipment not supplied or not recommended by TCL Communication Ltd.

- Modification or repair performed by individuals not authorised by TCL Communication Ltd. or its affiliates or your vendor.

- Modification, adjustment or alteration of software or hardware performed by individuals not authorised by TCL Communication Ltd.

- Inclement weather, lightning, fire, humidity, infiltration of liquids or foods, chemical products, download of files, crash, high voltage, corrosion, oxidation etc. Your phone will not be repaired in case labels or serial numbers

(IMEI) have been removed or altered. There are no express warranties, whether written, oral or implied, other than this printed limited warranty or the mandatory warranty provided by your country or jurisdiction. In no event shall TCL Communication Ltd. or any of its affiliates be liable for indirect, incidental or consequential damages of any nature whatsoever, including but not limited to commercial or financial loss or damage, loss of data or loss of image to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of indirect, incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you.

(1) The warranty period may vary depending on your country.

(2) The life of a rechargeable phone battery in terms of conversation time, standby time and total service life, will depend on the conditions of use and network configuration. Batteries being supplies, the specifications state that you should obtain optimal performance for your phone during the first six months after purchase and for approximately 200 more recharges. considered expendable 10

/3s8203820001052 Model/Modeio:5030M FCC 1D:2ACCJB118 TCL Communication Ltd Bluetooth Declaration 1D 0043603 N XXX ZLIA 01 NHW Hecho en China 5030M-2AALMX1 359203820001052 DOE N00 10000

354827110000013 Model/Modelo:5030J FCC ID:2ACCJB118 imerek TCL Communication Ltd. ks 3 Bluetooth Declaration 1D D043603 +t N XXX ZLIA 01 NHW Hecho en China 5030J-2AALMX1 354827110000013 WALANG TUE A 2 IS oe Model/Modelo:5130J FCC ID:2ACCJB118 TCL Communication Ltd. Bluetooth Declaration ID D043603 N XXX ZLIA 01 NHW Hecho en China 5130J-2AALMX1 356287 110000059 WLU ON EAT

MoselModeio 187M Fec ipzaccuBtie TCL Communiation Ls Buetocth Devaraton 10 0043603 9006 ZLIA 01 NAW Hecho en China 4387. 2AALMXI 3595 t0a0000246 001 EA

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Authority to Act as Agent Date: __23/09/2020_____ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_____ TCL Communication Ltd. _____ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ____12 months_____ By:

__________________________ _______Gong Zhizhou

(Signature 1)

(Print name) Title:

_________ Product Certification Manager _________________ On behalf of:

TCL Communication Ltd.

(Company Name)

. Telephone:

_______0086-755-36611722____________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11 TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Request for Confidentiality Date: __23/09/2020_____ Subject: Confidentiality Request for: ____2ACCJB118__ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Permanent Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual _____ TCL Communication Ltd._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 022818 11 TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong By:

(Signature/Title3) Gong Zhizhou

(Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

Request for Class II Permissive Change FCC ID: 2ACCJB118 Data: September 28, 2020 TO: Federal Communication Commission Please be notified that we, the undersigned, TCL Communication Ltd. declares that the reasons for this Class II permissive change are as below:

1. Update memory 32GB e-MMC flash memory + 3GB LPDDR4 to 32GB e-MMC flash memory + 2GB LPDDR4;

2. Brand is changed from Alcatel to TCL. Thank you. Sincerely, Zhizhou Gong / Product Certification Manager TCL Communication Ltd. Tel: 86-755-36611722 Fax: 86-755-36612000-81722 Email: zhizhou.gong@tcl.com V1.0

7/F, Block F4, TCL Communication Technology Building, TCL International E City, Zhong Shan Yuan Road, Nanshan District, Shenzhen, Guangdong, P.R. China 518052 TEL: 0086-755-36611722 FAX: 0086-75536612000-81722 Declaration of changes from Initial to Variant General: 4187M is a variant product of 5030J SOFTWARE MODIFICATIONS:

Protocol Stack changes: No MMS/STK/USAT/USIM changes: No DM/SUPL/VT/FUMO/SWP/HCI:NO Other changes detailed: 4187M memory is 32G ROM+2G RAM; 5030J memory is 32G ROM+3G RAM; Brand changed from Alcatel to TCL;

Antenna AP Modem Transceiver Rx SAW Filter ASM HARDWARE MODIFICATIONS:

Band changes: No PCB Layout changes: No Main RF components changes:

No GSM850 No GSM900 GSM1800 No GSM1900 No No No No No No No No No No No No No No No UMTS210 0 UMTS190 0 UMTS170 0 UMTS900 No UMTS850 No No No No No No No No No No No No No No No No No Power Amplifier No No No No No No No No Power Amplifie r No No No No No No No No No No No No No No No No No No No No No No No No Antenna AP Modem Transceiver Tx SAW Filter Duple xer ASM Antenna AP Modem Transceiver Duplexer ASM Power Amplifier Tx SAW Filter Rx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO LTE Band 1 LTE Band 3 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO LTE Band 7 LTE Band 8 LTE Band 20 LTE Band 28A LTE Band 28B LTE Band 38 LTE Band 40 LTE Band 41 NO NO Antenna AP Modem Transceiver Balun Diplexer Power Amplifie r No No Band pass filter No No No No No No Bluetooth No No Wi-Fi FM changes: No LCD/ Speaker/ Camera/ Vibrator changes: (indicated the changed items if yes) No Other changes detailed: NO No No No No No No MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: No Mechanical shell changes:

Whole size of EUT: No Distance of Ear reference point to bottom of handset: No Other trinkets to change the surface of handset: No Other changes detailed:

APPROVED BY:

Project Manager:

Signature:

Date: 2020-09-10

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Authority to Act as Agent Date: __19/08/2020_____ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_____ TCL Communication Ltd. _____ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ____12 months_____ _______Gong Zhizhou

(Print name) _________ Product Certification Manager _________________

(Signature 1) __________________________ By:

Title:

On behalf of: TCL Communication Ltd. . Telephone:

_______0086-755-36611722____________________

(Company Name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11 TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Date: __31/08/2020_____ Subject: Confidentiality Request for: ____2ACCJB118__ Request for Confidentiality Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual _____ TCL Communication Ltd._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 022818 11 TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong By:

(Signature/Title3) Gong Zhizhou

(Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

Request for Class II Permissive Change Data: August 31, 2020 FCC ID: 2ACCJB118 TO: Federal Communication Commission Please be notified that we, the undersigned, TCL Communication Ltd. declares that the reasons for this Class II permissive change are as below:

1. Update memory from 32+3G to 128+4G Thank you. Sincerely, Zhizhou Gong / Product Certification Manager TCL Communication Ltd. Tel: 86-755-36611722 Fax: 86-755-36612000-81722 Email: zhizhou.gong@tcl.com V1.0

7/F, Block F4, TCL Communication Technology Building, TCL International E City, Zhong Shan Yuan Road, Nanshan District, Shenzhen, Guangdong, P.R. China 518052 TEL: 0086-755-36611722 FAX: 0086-75536612000-81722 Declaration of changes from Initial to Variant LTE Band 1 LTE Band 3 Antenna AP Modem Transceiver Rx SAW Filter ASM General: 5030M is a variant product of 5030J SOFTWARE MODIFICATIONS:

Protocol Stack changes: No MMS/STK/USAT/USIM changes: No DM/SUPL/VT/FUMO/SWP/HCI:NO Other changes detailed: NO HARDWARE MODIFICATIONS:

Band changes: No PCB Layout changes: No Main RF components changes:

No GSM850 No GSM900 GSM1800 No GSM1900 No No No No No No No No No No No No No UMTS2100 No UMTS1900 No UMTS1700 No UMTS900 No UMTS850 No No No No No No No No No No No No No No No No Power Amplifier No No No No No No No No Power Amplifie r No No No No No No No No No No Antenna AP Modem Transceiver Tx SAW Filter Duple xer ASM Antenna AP Modem Transceiver Duplexer ASM Power Amplifier Tx SAW Filter Rx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO LTE NO NO NO NO NO NO NO NO NO No No No No No No No No No No No No No No NO NO Band 7 LTE Band 8 LTE Band 20 LTE Band 28A LTE Band 28B LTE Band 38 LTE Band 40 LTE Band 41 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Antenna AP Modem Transceiver Balun Diplexer Power Amplifie r No No Band pass filter No No No No No No Bluetooth No No Wi-Fi FM changes: No LCD/ Speaker/ Camera/ Vibrator changes: (indicated the changed items if yes) No Other changes detailed: Memory Changed from 32+3 to 128+4G No No No No No No MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: No Mechanical shell changes:

Whole size of EUT: No Distance of Ear reference point to bottom of handset: No Other trinkets to change the surface of handset: No Other changes detailed:

APPROVED BY:

Project Manager:

Signature:

Date: 2020-08-03

7/F, Block F4, TCL Communication Technology Building, TCL International E City, Zhong Shan Yuan Road, Nanshan District, Shenzhen, Guangdong, P.R. China 518052 TEL: 0086-755-36611722 FAX: 0086-75536612000-81722 Declaration of changes from Initial to Variant Antenna AP Modem Transceiver Rx SAW Filter ASM General: 5130M is a variant product of 5030M SOFTWARE MODIFICATIONS:

Protocol Stack changes: No MMS/STK/USAT/USIM changes: No DM/SUPL/VT/FUMO/SWP/HCI:NO Other changes detailed: NO HARDWARE MODIFICATIONS:

Band changes: No PCB Layout changes: No Main RF components changes:

No GSM850 No GSM900 GSM1800 No GSM1900 No No No No No No No No No No No No No No No UMTS210 0 UMTS190 0 UMTS170 0 UMTS900 No UMTS850 No No No No No No No No No No No No No No No No No Power Amplifier No No No No No No No No Power Amplifie r No No No No No No No No No No Antenna AP Modem Transceiver Tx SAW Filter Duple xer ASM No No No No No No No No No No No No No No NO NO Antenna AP Modem Transceiver Duplexer ASM LTE Band 1 NO NO NO NO NO NO NO LTE NO NO NO NO NO NO NO Power Amplifier Tx SAW Filter Rx SAW Filter NO NO Band 3 LTE Band 7 LTE Band 8 LTE Band 20 LTE Band 28A LTE Band 28B LTE Band 38 LTE Band 40 LTE Band 41 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Antenna AP Modem Transceiver Balun Diplexer Power Amplifie r No No Band pass filter No No No No No No Bluetooth No No Wi-Fi FM changes: No LCD/ Speaker/ Camera/ Vibrator changes: (indicated the changed items if yes) No Other changes detailed: Brand changed from alcatel to TCL. No No No No No No MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: No Mechanical shell changes:

Whole size of EUT: No Distance of Ear reference point to bottom of handset: No Other trinkets to change the surface of handset: No Other changes detailed:

APPROVED BY:

Project Manager:

Signature:

Date: 2020-08-13

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Authority to Act as Agent Date: __15/04/2020_____ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_____ TCL Communication Ltd. _____ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ____12 months_____ _______Gong Zhizhou

(Print name) _________ Product Certification Manager _________________

(Signature1) __________________________ By:

Title:

On behalf of: _______ TCL Communication Ltd. ___________________ Telephone:

_______0086-755-36611722____________________

(Company Name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11 TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Request for Confidentiality Date: __15/04/2020_____ Subject: Confidentiality Request for: ____2ACCJ B118__ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual _____ TCL Communication Ltd._____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 022818 11 TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong By:

(Signature/Title3) Gong Zhizhou

(Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

7/F, Block F4, TCL Communication Technology Building, TCL International E City, Zhong Shan Yuan Road, Nanshan District, Shenzhen, Guangdong, P.R. China 518052 TEL: 0086-755-36611722 FAX: 0086-75536612000-81722 Declaration of changes from Initial to Variant Antenna AP Modem Transceiver Rx SAW Filter ASM General: 5130J is a variant product of 5030J SOFTWARE MODIFICATIONS:

Protocol Stack changes: No MMS/STK/USAT/USIM changes: No DM/SUPL/VT/FUMO/SWP/HCI:NO Other changes detailed: NO HARDWARE MODIFICATIONS:

Band changes: No PCB Layout changes: No Main RF components changes:

No GSM850 No GSM900 GSM1800 No GSM1900 No No No No No No No No No No No No No No No UMTS210 0 UMTS190 0 UMTS170 0 UMTS900 No UMTS850 No No No No No No No No No No No No No No No No No Power Amplifier No No No No No No No No Power Amplifie r No No No No No No No No No No Antenna AP Modem Transceiver Tx SAW Filter Duple xer ASM No No No No No No No No No No No No No No NO NO Antenna AP Modem Transceiver Duplexer ASM LTE Band 1 NO NO NO NO NO NO NO LTE NO NO NO NO NO NO NO Power Amplifier Tx SAW Filter Rx SAW Filter NO NO Band 3 LTE Band 7 LTE Band 8 LTE Band 20 LTE Band 28A LTE Band 28B LTE Band 38 LTE Band 40 LTE Band 41 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Antenna AP Modem Transceiver Balun Diplexer Power Amplifie r No No Band pass filter No No No No No No Bluetooth No No Wi-Fi FM changes: No LCD/ Speaker/ Camera/ Vibrator changes: (indicated the changed items if yes) No Other changes detailed: Brand changed from alcatel to TCL. No No No No No No MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: No Mechanical shell changes:

Whole size of EUT: No Distance of Ear reference point to bottom of handset: No Other trinkets to change the surface of handset: No Other changes detailed:

APPROVED BY:

Project Manager:

Signature:

Date: 2020-04-22

ITEM COMPANY PN. OracleNumber SUPPLIER PN. SUPPLIER DESCRIPTION Qty AAA0000JA0CX AAA0000JA0C1 RC-01000JT FENGHUA 01000JT,FENGHUA 24 R9 AAA0000JB0CX AAA0000JB0C1 RC-02000JT FENGHUA 02000JT,FENGHUA AAA0000JC0CX AAA0000JC0C1 RS-03000JT FENGHUA 03000JT,FENGHUA AAA0243FA0CX AAA0243FA0C1 RC-01W243FT FENGHUA 01W243FT,FENGHUA AAA036SFD4CX AAA036SFD4C1 RPF-05MR36FT FENGHUA mm,RPF-05MR36FT,FENGHUA AAA0473FA8CX AAA0473FA8C1 RC-01W473FT FENGHUA mm,RC-01W473FT,FENGHUA R6104,R2 AAA047FJA0CX AAA047FJA0C1 RC-01U4R7JT FENGHUA 01U4R7JT,FENGHUA AAA047TFD4CX AAA047TFD4C1 RPF-05MR047FT FENGHUA 05MR047FT,FENGHUA

,Resistor,0 ohm,5 %,1/20 W,0201,0.650.350.26 mm,RC-

,Resistor,0 ohm,5 %,1/16 W,0402,1.10.60.4 mm,RC-

,Resistor,0 ohm,5 %,1/10 W,0603,1.750.950.5 mm,RS-

,Resistor,24K ohm,1 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,0.36 ohm,1 %,1/4 W,0805(T=0.5 mm),2.21.40.6

,Resistor,47K ohm,1

%,1/20 W,0201,0.650.350.28

,Resistor,4.7 ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,0.047 ohm,1

%,1/4 W,0805,2.21.40.6 mm,RPF-

5 3 1 1 2 1 1 1 2 3 4 5 6 7 8 REFERENC E No. C0671,FB7201,R 0205,R0612,R06 16,R0636,R0637

,R0701,R2100,R 7200,MD001,M01 705,M01712,MB2 812,M00805,R07 03,R0705,R0706

,R0711,R5110,M D006,MD007,R1, R0527,R3111,R3 112,R8,FB3104 FB4101,FB3105, FB3106 R2205 R5109 R4101 R6107 BOM Page 1 AAA0513JA0CX AAA0513JA0C1 RC-01W513JT FENGHUA 01W513JT,FENGHUA R1401 AAA0563FA0CX AAA0563FA0C1 RC-01W563FT FENGHUA 01W563FT,FENGHUA AAA0101JA0CX AAA0101JA0C1 RC-01W101JT FENGHUA 01W101JT,FENGHUA

,Resistor,51K ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,56K ohm,1 %,1/20 W,0201,0.650.350.28 mm,RC-

R0608,R0610,R5

,Resistor,100 ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

R0306,R0523,R0 524,R4110,R411 AAA0102JA0CX AAA0102JA0C1 RC-01W102JT FENGHUA 01W102JT,FENGHUA 20 1 AAA0103JA0CX AAA0103JA0C1 RC-01W103JT FENGHUA 01W103JT,FENGHUA AAA0104FA0CX AAA0104FA0C1 RC-01W104FT FENGHUA 01W104FT,FENGHUA R0609,R0611

,Resistor,100K ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

R0310,R3102,R3 AAA0104JA0CX AAA0104JA0C1 RC-01W104JT FENGHUA 01W104JT,FENGHUA AAA0122JA0CX AAA0122JA0C1 RC-01W122JT FENGHUA 01W122JT,FENGHUA AAA0151JA0CX AAA0151JA0C1 RC-01W151JT FENGHUA 01W151JT,FENGHUA R0620,R0621

,Resistor,1.5K ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

R0702,R3103,R3 AAA0152JA0CX AAA0152JA0C1 RC-01W152JT FENGHUA 01W152JT,FENGHUA 106

,Resistor,1K ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,10K ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,100K ohm,1 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,1.2K ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,150 ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

106 1 R6,R7,R0206,R1 402,R1406,R210 1,R2112,R2202, R3131,R3132,R3 138,R3139,R510 5,R6231,R6300, R6301,R6302,R6 303,R2110,R211 R0204,R0316,R0 604,R3109,R610 1,R6103,R00606 114 R3108 1 3 5 7 2 3 1 2 3 9 10 11 12 13 14 15 16 17 18 BOM Page 2 AAA022FJB0CX AAA022FJB0C1 RC-02U2R2JT FENGHUA 02U2R2JT,FENGHUA R5103,R5129,R5 AAA0241FA0CX AAA0241FA0C1 RC-01W241FT FENGHUA 01W241FT,FENGHUA AAA0270JA0CX AAA0270JA0C1 RC-01W270JT FENGHUA 01W270JT,FENGHUA R0619 AAA3011FA8CX AAA3011FA8C1 RC-01W3011FT FENGHUA mm,RC-01W3011FT,FENGHUA AAA0330JA0CX AAA0330JA0C1 RC-01W330JT FENGHUA 01W330JT,FENGHUA R3104,R3110 AAA0510JA0CX AAA0510JA0C1 RC-01W510JT FENGHUA 01W510JT,FENGHUA AAA0511JA0CX AAA0511JA0C1 RC-01W511JT FENGHUA 01W511JT,FENGHUA

,Resistor,2.2 ohm,5 %,1/16 W,0402,1.10.60.4 mm,RC-

,Resistor,240 ohm,1 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,27 ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,3.01K ohm,1

%,1/20 W,0201,0.650.350.28

,Resistor,33 ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,51 ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,510 ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

,Resistor,5.1K ohm,5 %,1/20 W,0201,0.650.350.28 mm,RC-

01W512JT,FENGHUA

(T)Thermistor,47K, 5%,0402,SDNT1005X473J4100FTF,SUNLOR D ORD ESD,Multilayer chip varistor,18 pF,30 %,5.5 V,0402,N/A,SDV1005E5R5C180NPTF,SUNL

(T)Metal Foil Chip Fixed Resistor,0.02 ohm,1%,1/2W,TCR 50PPM/,0805,MFG05HR020FT,Fenghua 3 4 1 3 2 2 6 1 2 8 1 R0520,R0521,R0 522,R2301 R2204,R3107,R3 113 R2132,R2133 R4102,R4103,R6 105,R3,R3101,R 3105 R4104 R0603,R0647 VR3101,VR3102, VR3104,VR3105, MLV6300,MLV630 1,MLV6302,MLV6 303 R6102 AAA0512JA0CX AAA0512JA0C1 RC-01W512JT FENGHUA AAC0473FB6CX AAC0473FB6CB SDNT1005X473J4100FTF SUNLORD ALA0000035CX ALA0000035C1 SDV1005E5R5C180NPTF SUNLORD AAA002SFD3DX AAA002SFD3D1 MFG05HR020FT Fenghua 19 20 21 22 23 24 25 26 27 28 29 BOM Page 3 30 ABA05FBJA0CX ABA05FBJA0C0 GRM0335C1HR50BA01D MURATA mm,GRM0335C1HR50BA01D,MURATA 4 002,M00103 31 32 33 34 35 ABA100JJA0CX ABA100JJA0C2 C0201C0G100J500NTA EYANG ABA101KJACCX ABA101KJACC2 C0201C0G101K500NTA EYANG ABA101JJB0CX ABA101JJB0C7 0402CG101J500NT FENGHUA ABA102KJA0CX ABA102KJA0C2 C0201X7R102K500N EYANG ABA103MGAXCX ABA103MGAXC2 C0201X5R103M250NTA EYANG

,Capacitor,0.5 pF,0.1 pF,50 V,C0G,0201,0.630.330.33 C0689,C7230,MP

,Capacitor,10 pF,5 %,50 V,C0G,0201,0.630.330.33 mm,C0201C0G100J500NTA,EYANG

,Capacitor,100 pF,10 %,50 V,C0G,0201,0.630.330.33 mm,C0201C0G101K500NTA,EYANG

,Capacitor,100 pF,5 %,50 V,C0G,0402,1.050.550.55 mm,0402CG101J500NT,FENGHUA

,Capacitor,1 nF,10 %,50 V,X7R,0201,0.630.330.33 mm,C0201X7R102K500N,EYANG

,Capacitor,10 nF,20 %,25 V,X5R,0201,0.630.330.33 mm,C0201X5R103M250NTA,EYANG 5 1 4 1 C0600,C0602,C0 607,C0615,C061 7,C0619,C0620, C0625,C0629,C0 638,C0643,C074 6,C2100,C2101, 16 C0633,M00216 C0621,C2105,C6 101,C3123,C312 6 C4101 C0740 C0628,C0639,C3 153,C7237 BOM Page 4 BOM Page 5 C0209,C0502,C0 503,C0504,C050 8,C0509,C0512, C0518,C0519,C0 521,C0603,C070 2,C0804,C2205, C2209,C2213,C2 218,C2220,C222 3,C2224,C2225, C2226,C2227,C2 228,C2230,C223 9,C2241,C2244, C2245,C2246,C2 247,C2253,C225 4,C2257,C3109, C3115,C3117,C4 114,C5100,C510 8,C5109,C5113, C5115,C5116,C5 119,C5120,C512 3,C5201,C5202, C5215,C5216,C6 105,C6110,C1,C C0310 C4104 ABA104MCA0CX ABA104MCA0C2 C0201X5R104M6R3NTAT EYANG 57 2,C5,C6506 ABA104MDAXCX ABA104MDAXC2 C0201X5R104M100NTA EYANG C5214,C6109 36 37 38 39 ABA105KGBXDX ABA105KGBXD2 C0402X5R105K250NTB EYANG ABA105KJC0CX ABA105KJC0C4 CL10A105KB8NNNC SAMSUNG

,Capacitor,100 nF,20 %,6.3 V,X5R,0201,0.630.330.33 mm,C0201X5R104M6R3NTAT,EYANG

,Capacitor,100 nF,20 %,10 V,X5R,0201,0.630.330.33 mm,C0201X5R104M100NTA,EYANG

,Capacitor,1 uF,10 %,25 V,X5R,0402,1.050.550.55 mm,C0402X5R105K250NTB,EYANG

,Capacitor,1 uF,10 %,50 V,X5R,0603,1.70.90.9 mm,CL10A105KB8NNNC,SAMSUNG 2 1 1 C0203,C0204,C0 307,C0312,C031 4,C0333,C0334, C0500,C0507,C0 511,C0513,C052 3,C0527,C0605, C0616,C0640,C2 106,C2203,C220 8,C2210,C2212, C2215,C2216,C2 229,C2232,C223 6,C2238,C2242, C2256,C2261,C2 263,C3116,C312 2,C4103,C4107, C5104,C5121,C5 206,C6401,C513 0,C6403,C7232, C5129,C5133,C5 MB2802 M00713,M00301 C3125,C3130 1 2 2 3 5 ABA105MCA0CX ABA105MCA0C4 CL03A105MQ3CSNH SAMSUNG 46 131,C5210 40 41 42 43 44 45 ABA120JJA0CX ABA120JJA0C2 C0201C0G120J500N EYANG ABA12FCGA0CX ABA12FCGA0C2 C0201C0G1R2C250N EYANG ABA153MCAXCX ABA153MCAXC2 C0201X5R153M6R3NTA EYANG ABA15FBJACCX ABA15FBJACC2 C0201C0G1R5B500NTA EYANG ABA180JJA0CX ABA180JJA0C2 C0201C0G180J500NTA EYANG

,Capacitor,1 uF,20 %,6.3 V,X5R,0201,0.630.330.33 mm,CL03A105MQ3CSNH,SAMSUNG

,Capacitor,12 pF,5 %,50 V,C0G,0201,0.630.330.33 mm,C0201C0G120J500N,EYANG

,Capacitor,1.2 pF,0.25 pF,25 V,C0G,0201,0.630.330.33 mm,C0201C0G1R2C250N,EYANG

,Capacitor,15 nF,20 %,6.3 V,X5R,0201,0.630.330.33 mm,C0201X5R153M6R3NTA,EYANG

,Capacitor,1.5 pF,0.1 pF,50 V,C0G,0201,0.630.330.33 C2102,L0606,L0 mm,C0201C0G1R5B500NTA,EYANG

,Capacitor,18 pF,5 %,50 V,C0G,0201,0.630.330.33 mm,C0201C0G180J500NTA,EYANG 600 C0004,C11,C13, C14,M01702 BOM Page 6 46 47 48 49 50 ABA18FCJA0CX ABA18FCJA0C2 C0201C0G1R8C500N EYANG M00506 ABA200JJACC2X ABA200JJACC2 C0201C0G200J500NTA EYANG YANG BOM

,Capacitor,1.8 pF,0.25 pF,50 V,C0G,0201,0.630.330.33 mm,C0201C0G1R8C500N,EYANG

,Capacitor,20 pF,5%,50 V,C0G,0201,N/A,C0201C0G200J500NTA,E

,Capacitor,22 pF,5 %,50 V,C0G,0201,0.630.330.33 mm,C0201C0G220J500NTA,EYANG

,Capacitor,220 pF,10 %,25 V,X7R,0201,0.630.330.33 mm,C0201X7R221K250NTA,EYANG

,Capacitor,2.2 uF,20

%,6.3 V,X5R,0201,0.690.390.39 ABA220JJA0CX ABA220JJA0C2 C0201C0G220J500NTA EYANG ABA221KGA0CX ABA221KGA0C2 C0201X7R221K250NTA EYANG ABA225MCAXCX ABA225MCAXC4 CL03A225MQ3CRNC SAMSUNG mm,CL03A225MQ3CRNC,SAMSUNG 51 ABA225MCB0CX ABA225MCB0C4 CL05A225MQ5NNNC SAMSUNG

,Capacitor,2.2 uF,20 %,6.3 V,X5R,0402,1.050.550.55 mm,CL05A225MQ5NNNC,SAMSUNG 14 1 1 1 1 M00102 C0688,C0735,C6

,C7,C8,C0601,C 0606,C0609,C06 10,C0611,C0612 12

,M00312 C3104 C6108 C0213,C0316,C0 501,C0526,C060 4,C0622,C0623, C2255,C2264,C2 265,C3113,C311 4,C4111,C3105 C0302,C0303,C0 306,C0319,C032 4,C0328,C0329, C0516,C0520,C0 741,C2200,C220 2,C2204,C2217, C2219,C2231,C3 101,C3103,C610 52 ABA226MCC0CX ABA226MCC0C4 CL10A226MQ8NRNC SAMSUNG mm,CL10A226MQ8NRNC,SAMSUNG 20 4,C6111

,Capacitor,22 uF,20 %,6.3 V,X5R,0603,1.811

,Capacitor,33 pF,10 %,50 V,C0G,0201,0.630.330.33 mm,C0201C0G330K500NTA,EYANG C7209,C7213,C0 736,C3110,C311 1,C3118,C3127, 9 C3128,C3129 53 ABA330KJACCX ABA330KJACC2 C0201C0G330K500NTA EYANG Page 7 ABA333MEAXCX ABA333MEAXC2 C0201X5R333M160NTA EYANG ABA36FBJACCX ABA36FBJACC2 C0201C0G3R6B500NTA EYANG ABA390JJA0CX ABA390JJA0C2 C0201C0G390J500NTA EYANG ABA39FCJA0CX ABA39FCJA0C2 C0201C0G3R9C500NTA EYANG C6107 C0781 MS0704 L0611 C0722,C0646,C0 630,C0645,M008 12,MS0104,MS03 04,C0739,MS030 1,M00105,M0030 5,M00512,M0070

,Capacitor,33 nF,20 %,16 V,X5R,0201,0.630.330.33 mm,C0201X5R333M160NTA,EYANG

,Capacitor,3.6 pF,0.1 pF,50 V,C0G,0201,0.630.330.33 mm,C0201C0G3R6B500NTA,EYANG

,Capacitor,39 pF,5 %,50 V,C0G,0201,0.630.330.33 mm,C0201C0G390J500NTA,EYANG

,Capacitor,3.9 pF,0.25 pF,50 V,C0G,0201,0.630.330.33 mm,C0201C0G3R9C500NTA,EYANG

,Capacitor,47 pF,10 %,50 V,C0G,0201,N/A,C0201C0G470K500NTA,E

,Capacitor,470 pF,10 %,25 V,X7R,0201,0.630.330.33 mm,C0201X7R471K250NTA,EYANG

,Capacitor,470 nF,20

%,6.3 V,X5R,0201,0.650.350.35

,Capacitor,4.7 uF,10 %,16 V,X5R,0603,1.70.90.9 mm,CL10A475KO8NNNC,SAMSUNG 1 1 1 1 2 1 2 ABA470KJACCX ABA470KJACC2 C0201C0G470K500NTA EYANG YANG 13 2 ABA471KGA0CX ABA471KGA0C2 C0201X7R471K250NTA EYANG C6102,C0738 ABA474MCAXCX ABA474MCAXC2 C0201X5R474M6R3N EYANG mm,C0201X5R474M6R3N,EYANG C0206 ABA475KEC0CX ABA475KEC0C4 CL10A475KO8NNNC SAMSUNG C3112,C5105 54 55 56 57 58 59 60 61 BOM Page 8 BOM Page 9 C0318,C0320,C0 325,C0331,C050 6,C0510,C0514, C0618,C0627,C2 201,C2207,C221 4,C2222,C2234, C2237,C3102,C4 110,C4112,C411 3,C4115,C3,C51 03,C5111,C5112

,C5114,C5122,C 5127,C6410,C4, M00705 M00402 C0200,C0300,C0 301,C0315,C032 1,C0326,C0505, C2233,C2258,C3 121,C5102,C223 C6106,C6103,C4 105,C0330

,Capacitor,4.7 uF,20 %,6.3 V,X5R,0402,1.150.650.65 mm,CL05A475MQ5NRNC,SAMSUNG

,Capacitor,8.2 pF,0.5 pF,50 V,C0G,0201,0.630.330.33 mm,C0201C0G8R2D500NTA,EYANG

,Capacitor,3 pF,0.25 pF,50 V,C0G,0201,0.630.330.33 mm,C0201C0G3R0C500NTA,EYANG

,Capacitor,10 uF,20 %,6.3 V,X5R,0402,1.20.70.7

,Capacitor,10 uF,20 %,25 V,X5R,0603,1.811 mm,CL10A106MA8NRNC,SAMSUNG

,Inductor,0.6 nH,0.1 nH,DCR=0.08 ohm,850 mA,0201,MultiLayer,0.650.350.35

,Inductor,10 nH,5 %,DCR=1.2 ohm,190 mA,0201,MultiLayer,0.65 0.350.35 1 1 4 1 ABA475MCB0CX ABA475MCB0C4 CL05A475MQ5NRNC SAMSUNG 30 C12 ABA82FDJA0CX ABA82FDJA0C2 C0201C0G8R2D500NTA EYANG ABA030CJA0CX ABA030CJA0C2 C0201C0G3R0C500NTA EYANG ABA106MCB0CX ABA106MCB0C0 GRM155R60J106ME44 MURATA mm,GRM155R60J106ME44,MURATA 12 5 ABA106MGC0CX ABA106MGC0C4 CL10A106MA8NRNC SAMSUNG 67 ACA06HBAA2CX ACA06HBAA2C4 SDCL0603Q0N6BT02B02 SUNLORD mm,SDCL0603Q0N6BT02B02,SUNLORD M00405 68 ACA10TJAA2CX ACA10TJAA2C4 SDCL0603Q10NJT02B02 SUNLORD mm,SDCL0603Q10NJT02B02,SUNLORD 2 M00503,MB2801 62 63 64 65 66 69 ACA10SJB06CX ACA10SJB06C1 SDCL1005CR10JTDF SUNLORD mm,SDCL1005CR10JTDF,SUNLORD L3101 70 ACB010M9BLCX ACB010M9BLCF MPIA201610-1R0M-LF MICROGATE 71 ACB010M9BMCX ACB010M9BMCF MPIA252012-1R0M-LF MICROGATE

,Inductor,100 nH,5 %,DCR=2.6 ohm,150.0 mA,0402,MultiLayer,1.15 0.650.65

,Power Inductor,1 uH,20

%,DCR=0.075 ohm,3150 mA,N/A,2400 mA,Wire-Wound,N/A,2.21.81.05 mm,MPIA201610-1R0M-LF,MICROGATE

,Power Inductor,1 uH,20

%,DCR=0.047 ohm,4000 mA,N/A,3600 mA,Wire-Wound,N/A,2.72.21.2 mm,MPIA252012-1R0M-LF,MICROGATE

,Power Inductor,10 uH,20

%,DCR=0.575 ohm,970 mA,N/A,620 mA,Wire-Wound,2.52.01.2

,Inductor,1 nH,0.1 nH,DCR=0.11 ohm,600 mA,0201,MultiLayer,0.650.350.35

,Inductor,12 nH,5 %,DCR=1.42 ohm,180 mA,0201,MultiLayer,0.65 0.350.35

,Inductor,1.2 nH,0.1 nH,DCR=0.13 ohm,600 mA,0201,MultiLayer,0.650.350.35

,Inductor,1.3 nH,0.1 nH,DCR=0.15 ohm,600 mA,0201,MultiLayer,0.650.350.35

,Inductor,15 nH,5 %,DCR=1.58 ohm,170 mA,0201,MultiLayer,0.65 0.350.35 1 1 1 1 5 1 1 1 7 L0302 L6101 C0634,MB2805,M S0701,R7201,M0 0314 M00704 C0744,M00814,M 01701,MS2802,M S2803,MS2806,L 2101 72 ACA100M907CX ACA100M907C1 SWPA252012S100MT SUNLORD mm,N/A,SWPA252012S100MT,SUNLORD L4103 73 ACA01TBAA5CX ACA01TBAA5C4 SDCL0603Q1N0BT02B02 SUNLORD mm,SDCL0603Q1N0BT02B02,SUNLORD 74 ACA12TJAA4CX ACA12TJAA4C4 SDCL0603Q12NJT02B02 SUNLORD mm,SDCL0603Q12NJT02B02,SUNLORD M00706 75 ACA12HBAA3CX ACA12HBAA3C4 SDCL0603Q1N2BT02B02 SUNLORD mm,SDCL0603Q1N2BT02B02,SUNLORD MS2804 76 ACA13HBAA2CX ACA13HBAA2C4 SDCL0603Q1N3BT02B02 SUNLORD mm,SDCL0603Q1N3BT02B02,SUNLORD 77 ACA15TJAA4CX ACA15TJAA4C4 SDCL0603Q15NJT02B02 SUNLORD mm,SDCL0603Q15NJT02B02,SUNLORD BOM Page 10 78 ACA15HBAA3CX ACA15HBAA3C4 SDCL0603Q1N5BT02B02 SUNLORD mm,SDCL0603Q1N5BT02B02,SUNLORD 6 L7204,M00414 79 ACA18TJAA4CX ACA18TJAA4C4 SDCL0603Q18NJT02B02 SUNLORD mm,SDCL0603Q18NJT02B02,SUNLORD 2 M01713,MB2813 80 ACA18HBAA6CX ACA18HBAA6C4 SDCL0603Q1N8BT02B02 SUNLORD mm,SDCL0603Q1N8BT02B02,SUNLORD 4 81 ACA02TBAA6CX ACA02TBAA6C4 SDCL0603Q2N0BT02B02 SUNLORD mm,SDCL0603Q2N0BT02B02,SUNLORD 2 M00306,M00406 BOM

,Inductor,1.5 nH,0.1 nH,DCR=0.15 ohm,600 mA,0201,MultiLayer,0.650.350.35 M00106,M00114, M00214,M00712,

,Inductor,18 nH,5 %,DCR=1.71 ohm,160 mA,0201,MultiLayer,0.65 0.350.35

,Inductor,1.8 nH,0.1 nH,DCR=0.18 ohm,500 mA,0201,MultiLayer,0.650.350.35

,Inductor,2 nH,0.1 nH,DCR=0.2 ohm,450 mA,0201,MultiLayer,0.65 0.350.35

,Inductor,22 nH,5 %,DCR=1.92 ohm,140 mA,0201,MultiLayer,0.65 0.350.35

,Power Inductor,2.2 uH,20

%,DCR=0.138 ohm,2100 mA,N/A,1450 mA,Wire-Wound,N/A,2.21.81.05 mm,MPIA201610-2R2M-LF,MICROGATE

,Inductor,2.2 nH,0.1 nH,DCR=0.2 ohm,450 mA,0201,MultiLayer,0.650.350.35

,Inductor,2.4 nH,0.1 nH,DCR=0.22 ohm,450 mA,0201,MultiLayer,0.650.350.35

,Power Inductor,0.33 uH, 20 %,DCR=0.022 ohm,6500 mA,N/A,5000 mA,Wire-Wound,N/A,2.72.21.05 mm,MPIA252010-R33M-LF,MICROGATE M00112,MS2801, M00302,M00412 M00514,M01714, MB2814 L0304,L0308 MP003,M00213,M S0101,MD004,M0 0313,M00413 M00113,M00502, L7202,M00215 L0300,L0301,L0 303 3 2 6 4 3 82 ACA22TJAA1CX ACA22TJAA1C4 SDCL0603Q22NJT02B02 SUNLORD mm,SDCL0603Q22NJT02B02,SUNLORD 83 ACB22FM9BJCX ACB22FM9BJCF MPIA201610-2R2M-LF MICROGATE 84 ACA22HBAA6CX ACA22HBAA6C4 SDCL0603Q2N2BT02B02 SUNLORD mm,SDCL0603Q2N2BT02B02,SUNLORD 85 ACA24HBAA4CX ACA24HBAA4C4 SDCL0603Q2N4BT02B02 SUNLORD mm,SDCL0603Q2N4BT02B02,SUNLORD 86 ACB33SM9B8CX ACB33SM9B8CF MPIA252010-R33M-LF MICROGATE Page 11 87 ACA36HBAA6CX ACA36HBAA6C4 SDCL0603Q3N6BT02B02 SUNLORD mm,SDCL0603Q3N6BT02B02,SUNLORD 8 2100,L7229 BOM

,Inductor,3.6 nH,0.1 nH,DCR=0.34 ohm,350 mA,0201,MultiLayer,0.650.350.35 C0718,M00505,M 00714,MS0106,M S0306,MS0706,L 88 ACA43HBAA1CX ACA43HBAA1C4 SDCL0603Q4N3BT02B02 SUNLORD 2 M00701,MS0302 89 ACB47FMDA0CX ACB47FMDA0C4 MPL2012S4R7MHT SUNLORD L4101 90 ACA56HBAA1CX ACA56HBAA1C4 SDCL0603Q5N6BT02B02 SUNLORD mm,SDCL0603Q5N6BT02B02,SUNLORD L7200 mA,0201,MultiLayer,0.650.350.35 M00504,M00802, 91 ACA62HBAA1CX ACA62HBAA1C4 SDCL0603Q6N2BT02B02 SUNLORD mm,SDCL0603Q6N2BT02B02,SUNLORD 2 M00806,MB2804 92 ACA68HJAA3CX ACA68HJAA3C4 SDCL0603Q6N8JT02B02 SUNLORD mm,SDCL0603Q6N8JT02B02,SUNLORD M01704

,Inductor,4.3 nH,0.1 nH,DCR=0.45 ohm,300 mA,0201,MultiLayer,0.650.350.35 mm,SDCL0603Q4N3BT02B02,SUNLORD Power Inductor,4.7 uH,20%,0.25 ohm,0805,230 mA,30 MHz,800 mA,MultiLayer,RoHS,2.31.451 mm,MPL2012S4R7MHT,SUNLORD

,Inductor,5.6 nH,0.1 nH,DCR=0.48 ohm,250

,Inductor,6.2 nH,0.1 nH,DCR=0.5 ohm,200 mA,0201,MultiLayer,0.650.350.35

,Inductor,6.8 nH,5 %,DCR=0.5 ohm,200 mA,0201,MultiLayer,0.65 0.350.35

,Inductor,7.5 nH,5 %,DCR=0.56 ohm,200 mA,0201,MultiLayer,0.65 0.350.35

,Inductor,8.2 nH,5 %,DCR=0.72 ohm,200 mA,0201,MultiLayer,0.65 0.350.35

,Inductor,9.1 nH,5 %,DCR=0.8 ohm,200 mA,0201,MultiLayer,0.65 0.350.35 1 3 1 1 3 3 93 ACA75HJAA3CX ACA75HJAA3C4 SDCL0603Q7N5JT02B02 SUNLORD mm,SDCL0603Q7N5JT02B02,SUNLORD L7205 94 ACA82HJAA1CX ACA82HJAA1C4 SDCL0603Q8N2JT02B02 SUNLORD mm,SDCL0603Q8N2JT02B02,SUNLORD 95 ACA91HJAA4CX ACA91HJAA4C4 SDCL0603Q9N1JT02B02 SUNLORD mm,SDCL0603Q9N1JT02B02,SUNLORD M00111,M00803, M00311 C0631,L4102,L7 207 Page 12 96 97 98 ACA39HBAA4CX ACA39HBAA4C4 SDCL0603Q3N9BT02B02 SUNLORD mm,SDCL0603Q3N9BT02B02,SUNLORD M00401 H-0801-151820-000X H-0801-151820-000 BLM15BD182SN1D MURATA 5BD182SN1D,MURATA FB3102,FB3103 H-1100-D103AW-001X H-1100-D103AW-001 SD103AWSFL JESTEK 99 H-1104-45P4N3-000X H-1104-45P4N3-000 WS4.5P4N3-B CYG WAYON 100 H-1104-05DFBN-000X H-1104-05DFBN-000 WE05DF-BN WAYON 2L,1.0x0.6mm,WE05DF-BN,WAYON 2 VR3103,VR3106 101 H-1104-DUCF02-000X H-1104-DUCF02-000 WE05DUCF-02 WAYON 02,WAYON VR3107 102 H-1401-0032GB-008X H-1401-0032GB-008 UNIC U502 UNMEN05GC1C31AS 153Ball,11.5x13x0.8mm,UNMEN05GC1C31 103 H-1401-13418Q-000X H-1401-13418Q-000 AW13418QNR AWINIC 0.05)mm,AW13418QNR,AWINIC U0800 D4101 D6101

,Inductor,3.9 nH,0.1 nH,DCR=0.34 ohm,350 mA,0201,MultiLayer,0.650.350.35

(S)Ferrite Bead,1.8Kohm,100MHz,100mA,0402,BLM1

(T)Diode,Schottky,350mA40V,SOD-

323,SD103AWSFL,JESTEK

(P)(T)Transient Voltage Suppressor,Bi-

directional,4.5V,400pF,DFN2020-

3L,WS4.5P4N3-B,CYG WAYON

(T)TVS(Transient Voltage Suppressor),Bi-

directional,5V,7pF,DFN-

(T)TVS (Transient Voltage Suppressor),Unidirectional,5V,0.5pF

,DFN1006-2L,1.0x0.6mm,WE05DUCF-

(P)(F)IC(MEMORY),eMMC5.1 Module,32GB,FBGA-

AS,UNIC

(P)(T)IC,0.1-3GHz SP8T Diversity Switch,3.3V VDD,QFN-

14L,2.0x2.0x(0.55

(T)IC,1A Flash LED Driver,Flash Current & Flash Timer Programmable,VIN=2.8-5.5V,DFN3x3-

10L,3.0x3.0x0.80mm,AW3641EDNR,AWINI 1 2 1 1 1 1 1 1 104 H-1401-3641ED-000X H-1401-3641ED-000 AW3641EDNR AWINIC C U5101 BOM Page 13 105 H-1401-4D024G-012X H-1401-4D024G-012 RS768M32LB4D2BDS-53BT RAYSON 0.1)mm,RS768M32LB4D2BDS-53BT,RAYSON U500 106 H-1401-51512Y-000X H-1401-51512Y-000 ET51512YB ETEK 1x1,1.0x1.0x0.5mm,ET51512YB,ETEK U1 107 H-1401-51528Y-000X H-1401-51528Y-000 ET51528YB ETEK 1x1,1.0x1.0x0.5mm,ET51528YB,ETEK U5102 108 H-1401-51530Y-000X H-1401-51530Y-000 ET51530YB ETEK 1x1,1.0x1.0x0.5mm,ET51530YB,ETEK U12 109 H-1401-6937CS-000X H-1401-6937CS-000 ETAsolution tion U6101 110 H-1401-9962ED-000X H-1401-9962ED-000 AW9962EDNR AWINIC 6L,2.0x2.0x0.80mm,AW9962EDNR,AWINIC 1 U4102 111 H-1401-A355DC-000X H-1401-A355DC-000 ETA355DCSU ETA 112 H-1401-AW5005-000X H-1401-AW5005-000 AW5005DNRZ AWINIC U0301 U7201 BOM Page 14

(T)IC(MEMORY),LPDDR4X,24Gb(768Mb x 16I/O x 2 channels),WFBGA-

200Ball,14.5x10.0x(0.7

(T)IC,LDO,High PSRR,Low Noise,300mA,1.2V,DFN4-

(N)IC,LDO,High PSRR,Low Noise,300mA,2.8V,DFN4-

(T)IC,LDO,High PSRR,Low Noise,300mA,3.0V,DFN4-

(P)(T)IC,12V/3A Switching Li Battery Charger and 5V/1A OTG With I2C Control,CSP-

20,2.0x1.6x0.6mm,ETA6937CSU,ETAsolu

(T)IC,Boost WLED Driver with PWM Brightness Control,Support 0.3% PWM Dimming,TDFN-

(F)IC,I2C Controlled Output Synchronous Step-Down Converter,5A,VIN=2.5-5.5V,CSP-

20,1.6x2.0x0.6mm,ETA355DCSU,ETA

(P)(T)IC,LNA for Global Navigation Satellite Systems(GNSS),DFN-

6L,1.5x1.0x(0.55 0.05)mm,AW5005DNRZ,AWINIC

(T)IC,High Efficiency,Low Noise,Ultralow Distortion,Constant Large Volume,Upgrade Seventh Generation Class K Audio Amplifier,CSP-14,1.6x1.68x(0.575 1 1 1 1 1 1 1 1 113 H-1401-AW8737-001X H-1401-AW8737-001 AW8737LCSR AWINIC 0.055)mm,AW8737LCSR,AWINIC U3101 114 H-1401-CP2131-000X H-1401-CP2131-000 OCP2131WPAD OCS CS U4101 115 H-1401-D8546C-000X H-1401-D8546C-000 MXD8546C Maxscend 0.05)mm,MXD8546C,Maxscend U2

(T)IC,Programmable Dual Output LCD Bias for Smartphone and Tablets,Vavdd=+4.0V~+6.0V,Vavee=-

4.0V~-6.0V,80mA,WLCSP-

15Ball,1.3x2.1x0.68mm,OCP2131WPAD,O

(P)(T)IC,X-DPDT Switch for 0.4 to 6.0G Applications,LGA-

10,1.1x1.5x(0.45

(T)IC,Bias Rail CMOS Voltage Regulator,500mA,Low Dropout:120mV at 500mA,Low Noise:25VRMS,UTDFN-

1.21.2-6L,1.2x1.2x0.6mm,SGM2037-

(T)IC,Digital Output 3-axis MEMS Accelerometer,12-bit,LGA-

12,2x2x(1.0

(P)(T)IC,Combo Sensor(Ambient Light Sensor and Proximity Sensor with Built-in IR VCSEL),2.84x1.44x(0.65

(T)IC,Baseband processor(LTE-

TDD/FDD,5M,FHD+,Octa-core up to 1.6GHZ),13.0x12.6x0.83mm,FCCSP-

(T)IC,PMU,FC BGA-

166,6.2x5.8x0.85mm,0.4PITCH,SC2721G

(T)IC,Multimode Multiband LTE-A Transceiver in CMOS,BGA-

123ball,4.5x4.5x0.85mm,0.35PITCH,SR 1 1 1 1 1 1 1 1 U0200 U0600 116 H-1401-GM2037-000X H-1401-GM2037-000 SGM2037-ADJXUDX6G/TR SGMICRO ADJXUDX6G/TR,SGMICRO U2201 117 H-1401-K8BA53-000X H-1401-K8BA53-000 STK8BA53 Sensortek 0.05)mm,STK8BA53,Sensortek U5203 118 H-1401-W20000-000X H-1401-W20000-000 W2000 Sensortek 0.1)mm,W2000,Sensortek U4 119 AMA0001104CX AMA0001104C1 SC9863A SPREADTRUM 774ball,0.4PITCH,SC9863A,SPREADTRUM U2100 120 AMN0001592CX AMN0001592C1 SC2721G SPREADTRUM

,SPREADTRUM 121 AMR0000101CX AMR0000101C1 SR3595D SPREADTRUM 3595D,SPREADTRUM BOM Page 15 122 AMF0001654CX AMF0001654C1 RTM7916-51 RDA 0.10)mm,RTM7916-51,RDA 1 U0705

(T)IC,Tx-Rx FEM for Quad-Band GSM/GPRS/EDGE,Fourteen Linear TRx Switch Ports,Dual-Band TD-

SCDMA,Dual-Band TDD-

LTE,5.3x5.5x(0.842

(T)IC,LTE Multi-band Power Amplifier Module,FDD LTE(B1,2,3,4,5,6,7,8,9,10,12,13,14, 17,18,19,20,25,26,27,28,30,65,66,68

,71),TDD LTE(B33,34,35,36,37,38,39,40,41,44)

,4.0x6.8x(0.80.1)mm,RPM6743-

31,RDA

(T)LED(White),Top View,IF=500mA,2.04x1.64x0.85mm,COLO R BIN(5700-6500K);INTENSITY BIN(100-125LM);VF BIN:W(3.3-

3.9V),MOC2016-03-5565-N-QAQC-

(T)Filter(SAW),RX

,band1,2140MHz,1.1x0.9x0.5mm,SFHG

(P)(T)Filter,SAW Filter For GPS/GLONASS/BEIDOU,Unbalanced,1580M Hz,1.1x0.9x0.65mm,NDFH045-

1580SA,HUAYING

(T)Duplexer(LTE BAND7),Unbalanced,2535/2655MHz,1.80 x1.40x0.6mm,SAYEY2G53BA0F0ARXX,MURA

(T)Filter(SAW),RX

,band7,2655MHz,1.1x0.9x0.5mm,SFHG 1 1 1 1 1 1 U0601 D5101 U0006 U7202 UM007 U0801 123 AMF0000394CX AMF0000394C1 RPM6743-31 RDA 124 H-1501-03QAQC-000X H-1501-03QAQC-000 QAQC-B SHINEON B,SHINEON MOC2016-03-5565-N-

125 H-1800-0AA002-000X H-1800-0AA002-000 SFHG40AA002 WISOL 40AA002,WISOL 126 H-1800-1580SA-000X H-1800-1580SA-000 NDFH045-1580SA HUAYING 127 H-1800-53BR05-000X H-1800-53BR05-000 SAYEY2G53BA0F0ARXX MURATA TA 128 H-1800-56BA00-000X H-1800-56BA00-000 SFHG56BA002 WISOL 56BA002,WISOL BOM Page 16 129 H-1800-718J02-001X H-1800-718J02-001 SFX718EYJ02 WISOL 130 H-1800-733J02-001X H-1800-733J02-001 SFX733EYJ02 WISOL 0.1)mm,SFX733EYJ02,WISOL UMB28

(P)(T)Duplexer(LTE BAND28(A Block)),Unbalanced,718/733MHz,1.80x 1.40x(0.52 0.1)mm,SFX718EYJ02,WISOL

(P)(T)Duplexer(LTE BAND28(B Block)),Unbalanced,733/788MHz,1.80x 1.40x(0.52

(T)Filter,RX Single SAW,LTE BAND28 Full-

Band,Unbalanced,780MHz,1.1x0.9x0.55 mm,SFH780AA402,WISOL

(P)(T)Duplexer(LTE BAND5),Unbalanced,836.5/881.5MHz,1. 80x1.40x(0.55 0.1)mm,SFX836EYJ02,WISOL

(T)Duplexer(TC-SAW LTE BAND8),Unbalanced,897.5/942.5MHz,1. 80x1.40x(0.48

(T)Filter(SAW),Rx,LTE Band 3,1842.5MHz,1.1x0.9x0.5mm,SFHG42AA0 BAND1),Unbalanced,1950/2140MHz,1.80 02,WISOL

(T)Duplexer(LTE x1.40x(0.65

(N)Duplexer(LTE BAND2),Unbalanced,1800/1960MHz,1.80

(P)(T)Filter,WiFi Filter for LTE(2402.5-2481.5MHz),1.1x0.9x(0.6

(T)DIPLEXER,GPS(1.5GHZ)/WLAN(2.4G/5 GHZ),1.6x0.8x0.7mm,MDPX18M1524P69-

1 1 1 1 1 1 1 1 1 1 UM017 U0007 UM005 UM008 UMX02 UM001 UM003 U7204 U7200 131 H-1800-780402-000X H-1800-780402-000 SFH780AA402 WISOL 132 H-1800-836J02-000X H-1800-836J02-000 SFX836EYJ02 WISOL 133 H-1800-897EYT-000X H-1800-897EYT-000 SFX897EYT02 WISOL 0.05)mm,SFX897EYT02,WISOL 134 H-1800-G42A02-000X H-1800-G42A02-000 SFHG42AA002 WISOL 135 H-1800-G50FY9-000X H-1800-G50FY9-000 SFXG50FY902 WISOL 0.05)mm,SFXG50FY902,WISOL 136 H-1800-G80AYM-000X H-1800-G80AYM-000 SFXG80AYM02 WISOL x1.40x0.63mm,SFXG80AYM02,WISOL 137 H-1800-P2413E-000X H-1800-P2413E-000 RSFP2413E ROFS 0.05)mm,RSFP2413E,ROFS 138 H-1801-524P69-000X H-1801-524P69-000 MDPX18M1524P69-D03 MICROGATE D03,MICROGATE BOM Page 17 139 H-2101-10F010-000X H-2101-10F010-000 OK-10F010-04 J5202 140 H-2101-10F024-000X H-2101-10F024-000 OK-10F024-04 J2,J5103,J3 141 H-2101-10F030-000X H-2101-10F030-000 OK-10F030-04 J1,J6 142 H-2106-004A01-000X H-2106-004A01-000 RF004-00112A01 00112A01, J0701 143 H-2106-818998-000X H-2106-818998-000 818011998 ECT J0702,J0801 144 H-2107-818968-000X H-2107-818968-000 818003968 ECT 0.9mmH,6.0x2.8x0.9mmH,818003968,ECT BAT1 145 H-2108-22F38A-000X H-2108-22F38A-000 PH69-1B22F38A 146 H-2109-31025R-001X H-2109-31025R-001 CFPC0310-25RL-TAG TAG, J1001 J4102

(T)BTB connector socket(

),10PIN,0.4PITCH, 0.7mm,4.6x2.5x0.7mm,OK-10F010-04,

(T)BTB connector socket(

),24PIN,0.4PITCH, 0.7mm,7.4x2.5x0.7mm,OK-10F024-04,

(T)BTB connector socket(

),30PIN,0.4Pitch, 0.7mmH,8.6x2.5x0.7mmH,OK-10F030-04,

(T)RF Coaxial ConnectorIV Generation,,, 0.451.5, 1.2mm,2.1x2.05x0.6mmH,RF004-

(T)RF Switchable Receptacle,III Generation,,,0.5, 1.35,2.1x2.0x0.9mmH,818011998,ECT

(P)(T)Battery Connector,,

,6Pin,1.3Pitch,

(T)Audio Jack(3.5mm), 1.65mm,,5Pin(5DIP),

,12.7x8.8x4.0mmH,PH69-1B22F38A,

(T)FPC CONNECTOR, 25PIN,0.3PITCH,,FPC0.2mm,

,9.0x3.25x1.0mmH,CFPC0310-25RL-

1 3 2 1 2 1 1 1 BOM Page 18 147 H-2116-A0303R-002X H-2116-A0303R-002 KCF-A13002003R-0100 A13002003R-0100, J5 148 149 H-2200-000261-030X H-2200-000261-030 H-2302-FS1800-802X H-2302-FS1800-802 X1E000291002400 FS180-MB-V0.2 EPSON X1E000291002400,EPSON PCB,FS180-MB-V0.2, 150 H-5303-FS1680-B11X H-5303-FS1680-B11 FS168 mmH,FS168, 151 H-5303-FS1690-B09X H-5303-FS1690-B09 FS169 152 H-5303-FS1800-B07X H-5303-FS1800-B07 FS180

,FS180, 153 H-5303-FS1800-B08X H-5303-FS1800-B08 FS180

,FS180, 154 H-5303-FS1800-B09X H-5303-FS1800-B09 FS180 155 H-5405-A13000-000X H-5405-A13000-000 KSN-A13000101R-0100 A13000101R-0100, 156 H-5405-JSIT18-000X H-5405-JSIT18-000 P-JS-IT-18

(T)Combo connector(NANO SIM/T NANO SIM )PUSH,

,22PIN,27.7x17.2x1.45mmH,KCF-

(T)Crystal,With thermistor,26MHz, 10ppm,CL=9.0pF,RT=100K OHM(B-

constant=4250K),2520,2.5x2.0x1.0mm,

(T)Shielding Case(GPS),,

,0.2mm,,5.75.41.3

(T)Shielding Case(RF1_V0.2),,

,0.2mm,

,25x16.8x1.5mmH,,FS169,

(P)Shielding Case(BB1),L,, 0.2mm,

,34.35x29.05x1.5mmH,

(T)Shielding Case(BB2),,, 0.2mm,26x22.2x1.5mmH,

(P)Shielding Case(RF),,

,0.2mm,

,28.2x13x1.5mmH,,FS180,

(T)(SMT),, 2.3x1.2,0.55, 0.65/1.25,2.9x1.0x1.25mmH,KSN-

(T)(SMT),, 0.9,0.45,1.0/1.75, 1.4,3.4x0.9x1.8mmH,P-JS-IT-18 , 1 1 1 1 1 1 1 1 8 4 X0600 TPD5 TPD4 TPD1 TPD3 TPD2 SP1,SP2,SP3,SP 4,SP5,SP6,SP31 01,SP3102 ANT0801,ANT080 2,ANT7201,ANT7 202 BOM Page 19 157 H-1800-Y1G73B-000X H-1800-Y1G73B-000 SAYEY1G73BA0F0ARXX MURATA A0F0ARXX,MURATA 158 159 H-1800-G60CA2-000X H-1800-G60CA2-000 SFHG60CA002 CPG0000048CX CPG0000048C0 BOM

(T)Duplexer(LTE BAND4),RX

,1733MHz,1.8x1.4x0.6mm,SAYEY1G73B

(T)Filter,RX Single SAW,LTE Band2,Unbalanced,1960MHz,1.1x0.9x0. 55mm,SFHG60CA002,WISOL

,PCBA LABLE,Rav4,N/A,10.00 8.00 mm,N/A,With Glue,N/A,HENGWEI WISOL HENGWEI UM004 U0809 1 1 1 Page 20

Channel Channel 251 Channel 190 Channel 128 11 Conducted Output Power Table 11.1: GSM Speech GSM 850 33 1 29.5 1 PCS 1900 33 1 29.5 1 Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Channel Channel 810 Channel 661 Channel 512 Table 11.2: GPRS and EGPRS GSM 850 GPRS & GSM 850 EGPRS (GMSK) Channel 251 190 128 1 Txslot 2 Txslots 3Txslots 4 Txslots 1 Txslot 2 Txslots 3Txslots 4 Txslots Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) 33 1 31 1 29 1 27 1 251 27 1 25.5 1 23 1 20.5 1 GSM 850 EGPRS (8PSK) 33 1 31 1 29 1 27 1 190 27 1 25.5 1 23 1 20.5 1 33 1 29.5 1 33 1 31 1 29 1 27 1 128 27 1 25.5 1 23 1 20.5 1 PCS 1900 GPRS & PCS 1900 EGPRS(GMSK) 1 Txslot 2 Txslots 3Txslots 4 Txslots 1 Txslot 2 Txslots 3Txslots 4 Txslots Channel Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) 810 30.0 1 28 1 26.5 24.5 1 1 810 25.5 1 24 1 21 1 17 1 PCS 1900 EGPRS(8PSK) 661 30.0 1 28 1 26.5 24.5 1 1 661 25.5 1 24 1 21 1 17 1 512 30.0 1 28 1 26.5 24.5 1 1 512 25.5 1 24 1 21 1 17 1 Channel Channel 9262 Channel 9400 Channel 9538 Channel Channel 1312 Channel 1412 Channel 1513 Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) 22.5 1 Table 11.3: WCDMA WCDMA Band II 23 1 23 1 WCDMA Band IV WCDMA Band V 23 1 23 1 22.5 1 Channel Channel 4132 Channel 4182 Channel 4233 23 1 23 1 22.5 1 Tolerance (dB) Item band ARFCN FDD II result 9262 9400 9538 Chnannel

(1852.4MHz)

(1880MHz)

(1907.6MHz) HSDPA HSUPA DC-HSDPA 1 2 3 4 1 2 3 4 5 1 2 3 4 Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Tolerance (dB) Tolerance (dB) 23 23 22.5 22.5 1 20 21 21 23 1 23 23 22.5 22.5 1 23 23 22.5 22.5 1 20 21 21 23 1 23 23 22.5 22.5 1 23 23 22.5 22.5 1 20 21 21 23 1 23 23 22.5 22.5 1 Target (dBm) 20.5 20.5 20.5 Item band ARFCN FDD IV result 1312 1412 1513 Chnannel 1712.4MHz 1732.4MHz

(1752.6MHz HSDPA HSUPA DC-HSDPA Tolerance (dB) 1 2 3 4 1 2 3 4 5 1 2 3 4 Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Tolerance (dB) Tolerance (dB) 22 22 21.5 21.5 1 20 20 20 20 22 1 22 22 21.5 21.5 1 22 22 21.5 21.5 1 20 20 20 20 22 1 22 22 21.5 21.5 1 22 22 21.5 21.5 1 20 20 20 20 22 1 22 22 21.5 21.5 1 Item band ARFCN FDD V result 4132 4182 4233 Chnannel

(826.4MHz)

(836.4MHz)

(846.6MHz) Tolerance (dB) 1 2 3 4 1 2 3 4 5 1 2 3 4 Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Tolerance (dB) Tolerance (dB) 22 22 22 22 1 20 20 20 20 22 1 22 22 22 22 1 22 22 22 22 1 20 20 20 20 22 1 22 22 22 22 1 22 22 22 22 1 20 20 20 20 22 1 22 22 22 22 1 HSDPA HSUPA DC-HSDPA Table 11.4: LTE LTE Bands LTE B2 LTE B4 LTE B7

(QPSK/1RB)

(QPSK/1RB)

(QPSK/1RB) Supported Bandwidths (MHz) Target (dBm) Tolerance (dB) 1.4,3,5,10,15,20 1.4,3,5,10,15,20 5,10,15,20 23 1 23 1 23 1 Table 11.5 Maximum Power Reduction (MPR) for LTE Channel bandwidth / Transmission bandwidth configuration [RB]

Modulation 1.4 QPSK 16 QAM 16 QAM MHz

> 5 5

> 5 3 MHz

> 4 4

> 4 10 MHz

> 12 12

> 12 15 MHz

> 16 16

> 16 20 MPR (dB) MHz

> 18 18

> 18 1 1 2 5 MHz

> 8 8

> 8 Power Reduced Table 11.6: GSM Speech PCS 1900 Channel Channel 810 Channel 661 Channel 512 Target (dBm) Tolerance (dB) 27.5 1 27.5 1 27.5 1 Channel Channel 9262 Channel 9400 Channel 9538 Table 11.7: WCDMA WCDMA Band II Target (dBm) Tolerance (dB) Target (dBm) Tolerance (dB) 18.5 1 17.5 1 Channel Channel 1312 Channel 1412 Channel 1513 WCDMA Band IV FDD II result Item band ARFCN 9262 9400 9538 Chnannel

(1852.4MHz)

(1880MHz)

(1907.6MHz) 18.5 1 17.5 1 18.5 18.5 18.0 18.0 1 15.5 16.5 16.0 16.5 18.0 1 18.5 18.5 18.0 18.0 1 18.5 1 17.5 1 18.5 18.5 18.0 18.0 1 15.5 16.5 16.0 16.5 18.0 1 18.5 18.5 18.0 18.0 1 18.5 18.5 18.0 18.0 1 15.5 16.5 16.0 16.5 18.0 1 18.5 18.5 18.0 18.0 1 HSDPA HSUPA DC-HSDPA 1 2 3 4 1 2 3 4 5 1 2 3 4 Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Tolerance (dB) Tolerance (dB) Tolerance (dB) 1 Power Reduced HSDPA HSUPA DC-HSDPA Item band ARFCN FDD IV result 1312 1412 1513 Chnannel 1712.4MHz 1732.4MHz

(1752.6MHz Tolerance (dB) 1 2 3 4 1 2 3 4 5 1 2 3 4 Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Target (dBm) Tolerance (dB) Tolerance (dB) 16.5 16.5 16.0 16.0 1 14.5 14.5 14.5 14.5 16.5 1 16.5 16.5 16.0 16.0 1 16.5 16.5 16.0 16.0 1 14.5 14.5 14.5 14.5 16.5 1 16.5 16.5 16.0 16.0 1 16.5 16.5 16.0 16.0 1 14.5 14.5 14.5 14.5 16.5 1 16.5 16.5 16.0 16.0 1 Power Reduced Table 11.8: LTE B2 LTE Bands LTE B2 (QPSK/1RB) Supported Bandwidths(MHz) 1.4,3,5,10,15,20 Target (dBm) Tolerance (dB) 17.5 1 15 MHz

> 16 16

> 16 Channel bandwidth / Transmission bandwidth configuration [RB]

Modulation 1.4 QPSK 16 QAM 16 QAM MHz

> 5 5

> 5 3 MHz

> 4 4

> 4 5 MHz

> 8 8

> 8 10 MHz

> 12 12

> 12 20 MPR (dB) MHz

> 18 18

> 18 1 1 2 Channel bandwidth / Transmission bandwidth configuration [RB]

LTE Bands Supported Bandwidths (MHz) Target (dBm) Tolerance (dB) Modulation 1.4 QPSK 16 QAM 16 QAM MHz

> 5 5

> 5 3 MHz

> 4 4

> 4 LTE B4

(QPSK/1RB) 1.4,3,5,10,15 16.5 1 15 MHz

> 16 16

> 16 20 MPR (dB) MHz

> 18 18

> 18 1 0.5 1.5 Table 11.9: LTE B4 LTE B4

(QPSK/1RB) 20 17 1 10 MHz

> 12 12

> 12 5 MHz

> 8 8

> 8 Wi-Fi Conducted Output Power Channel Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Table 11.10: Wi-Fi Wi-Fi 802.11b (2.4GHz) Channel 1 Channel 6 Channel 11 Wi-Fi 802.11g (2.4GHz) 6M-24M Channel 1 Channel 6 Channel 11 Wi-Fi 802.11g (2.4GHz) 36M-54M Channel 1 Channel 6 Channel 11 Wi-Fi 802.11n HT20 (2.4GHz)MCS7 Channel 1 Channel 6 Channel 11 10 1 8 1 8 1 7 1 12 1 10 1 10 1 9 1 11 1 9 1 9 1 7 1 BT Conducted Output Power Manufacturing tolerance Channel Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Channel Target (dBm) Tolerance (dB) Channel 0 Channel 19 Channel 39 Table 11.11: BLE GFSK Table 11.12: EDR GFSK

-6.5 1 4.5 1 3.5 1 4.5 1

-7.5 1 5.5 1 4.5 1 5.5 1 Channel 0 Channel 39 Channel 78 EDR2M-4_DQPSK Channel 0 Channel 39 Channel 78 EDR3M-8DPSK Channel 0 Channel 39 Channel 78

-6.5 1 4.5 1 3.5 1 4.5 1