JOYTECH FOR XBOXK"
WIRELESS NEO S CONTROLLER USER GUIDE Besign and specifications are subject to change without notice. Dispose of this product or products contained in this pack in accordance with local and national disposal regulations. Microsoft, Xbox and the Xbox logo are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and /or other countries and are used with permission from Microsoft. JOY TECH is a registered trademark of Joytech Europe Ltd. and TAKE 2 is a trademark of Take 2 Interactive Software Joytech Europe Ltd. Saxon House 2-4 Victoria Street Windsor Berkshire Sl4 1EN UK VERSION 2.1 A Take2 Company 505-110B060102 i INTRODUCTION
| Thank you for purchasing the JOYTECH Wireless Neo S Controller for use with the Xbox video games system fram Microsoft. The Wireless Neo S Controller features full Analog Controls and Dual Vibration Feedback. Before operating your new controller, please familiarise yourself thoroughly with this User Guide so that you fully understand the set-up procedurs; and functions of the products included in this pack. aS 1 1 t=) ANALOG CONTROLLER rN a RECEIVER MODULE LAYOUT
= oe Signal Lock indicator Left Thumbstick
{La) Action Button Oirectional Button Right Thumbstick
(R3) Back Button Auto Connect Button (AC) Start Button Left trigger Right trigger Power / Vibration Switch Battery Compartment RECEIVER MODULE Expansion Slot A Power Indicator Signal Lock Indicator Auto Connect Button (AC) XS HOW TO SETUP YOUR WIRELESS NEO S CONTROLLER 1) Ensure the power is turned off on your console. i 2) Carefully insert 3 AAA (LRO3) alkaline batteries into the battery compartment observing the correct polarity (+/-). Please note that the life expectancy of alkaline batteries may vary depending on battery strength and use of the Vibration Feedback feature. We advise you to use new batteries as this will ensure the best performance. See section entitled Battery Care 3) Insert the Receiver Module into controller port 1 of your console and turn the power on. The Power Indicator will illuminate.
(NOTE: always connect to port 1 for single player games). 4) Turn on the Wireless Analog Controller by moving the Power /
Vibration switch located on the underside of the controlter to the ON or ON/ VIB position.
(NGTE: When this switch is in the ON position the vibration motors i are deactivated. In the ON/ VIB position the motors are activated). The Wireless Neo S Controller will automatically search for the Receiver Madule. The Signal Lock Indicator on both the Receiver Module and Wireless Neo S Controller will flash quickly until they lock onto each other Once locked, the Signal Lock Indicators will cantinue to flash at a slower rate. 5) You are ready to play. ENGLISH MULTI PLAYER SETUP USING THE AUTO CONNECT BUTTON When usiny two or more JOYTECH Wireless Neo S Controllers (i.e. when several controilers are setup with a Multi Player Adapter) it may be necessary to use the Auto Connect Button (AC) ta match each controller uo a Specific Heceiver Unit. Jo do this simply press the AC Button on the deceiver nic tcated in the controller part you wish te match foiiowea by the AC Bi'tron on the Wireless Neo S Controller you want te match it to. The green Signal Lock Indicators should illuminate when bath the Receiver Unit and controller are matched. ANALOG FUNCTIONS ;
Each button of the Wireless Neo S Controiier (except start, back, directional, L3 & R3 buttons) provides full analog control, meaning that the control is proportional to the amount of pressure placed on the button. The functions of the buttons will be determined by the game. Refer to your game Instruction Guide for further details. VIBRATION FEEDBACK The Wireless Neco S Controller features High Intensity Dual Vibration Feedback Technology and full analog buttons, which will only function if it is supported by the game being played. Please alsa nate that the depth of vibration may vary according to each game. To increase the life expectancy of the alkaline batteries you can turn off the vibration feedback by using the Power/ Vibration switch. AUTO BATTERY SAVE FUNCTION The Wireless Neo S Controller has an intelligent Auto Battery Save Function, which turns the controller power off after 5 minutes of no button activity. Jo turn the power back on, press any button on the controller (except the thumbsticks). NOTE: The Power Indicator LED on the WIRELESS NEO S CONTROLLER |
will Flash rapidly when the battery power is low. It is recammend that you change the batteries at this time. EXPANSION SLOTS
| There are two expansion slots (A and B) within the Receiver Module. These
| can be used to add specific devices to your setup such as a Memory Unit
| and /or the Xbax Live communicator headset.
EXPANSION SLOT A - For use with Memory Unit only. EXPANSION SLOT B - For use with Memory Unit or the Xbox Live communicator headset. ENGLISH BATTERY CARE Incorrect use of batteries can result in battery leakage or explosion. When using batteries, be sure to following these instructions:
* Make sure that the plus and minus terminals of the batteries are inserted in the correct directions.
* Da not mix old and new or different types of batteries ,
* Do not attempt to recharge non-rechargeable type batteries.
* Remove the batteries when the product will not be used for an extended period of time.
* If the battery has leaked, be sure to carefully remove all residue before inserting new batteries. CAUTION
* Do not remove this product when the console power is ON.
+ Avoid placing this product near extreme temperatures or humidity. Do not submerse or allow this product to come into contact with water Use in dry locations only.
* An adult should supervise young children when using this product.
* Use of any attachment or accessory with this product not recammended or sold by JOYTECH may result in risk of fire, electrical shock or injury ta persons or product.
* Do not clean any parts with alcohol, cleaning solutions containing aicohol or strong abrasives. Use a soft cloth and a little water
* Tampering with this product will invalidate your JOYTECH warranty. ENGLISH RTANT HEALTH WARNINGS PHOTOSENSITIVE SEIZURE WARNING A very small percentage of people may experience a seizure when exposed to certain visual images, including flashing lights or patterns that may-appear in video games. Even peaple who have no-history of seizures or epitecsy ray nave an undiagnosed condition that can cause these photosensitive epileptic seizures while watching video games. These seizures may have a variety of symptams, including
| lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or jegs, disorientation, canfusion, or mamentary loss of awareness. Seizures may also cause lass of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.
' Immediately stop playing and consult a doctor if you
| experience any of these symptoms. i Parents should watch for or ask their children about the
| above symptoms - children and teenagers are more likely than adults to experience these seizures. TAKING THE FOLLOWING PRECAUTIONS MAY REDUCE THE RISK OF PHOTOSENSITIVE EPILEPTIC SEIZURES:
Sit further away from the screen Use a smaller TV screen
* Play in a well-lit room
* Do not play when you are drowsy or fatigued If you or any of your relatives have a history of seizures or epilepsy, consult a doctor before playing. WE ALSO ADVISE YOU TO TAKE REGULAR BREAKS OF 15 MINUTES EVERY HOUR. Design and specifications are subject to change without notice. Dispose of this praduct or products contained in this pack in accordance with local and national disposal regulations. Microsoft, Xbox and the Xbox loge are either registered trademarks or trademarks of Microsoft Corparation in the U.S. and /or other countries and are used with permission fram Microsoft. Seay S
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation, CAUTION To maintain compliance with the FCC's AF exposure guidelines place the receiver module unit at least 2Gcm fram nearby persons. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class8 digital device, pursuant to Part 15 of the FCC Aules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of che following measures:
*Reorient. ar relocate the receiving antenna. Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on @ circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. tals! Y When you purchase from JOYTECH, you purchase quality. JOYTECH offers a One (1) year replacement warranty on this product. JOYTECH warrants to the original consumer purchaser that this product is free from defects in either material or workmanship. If a defect covered by this warranty occurs, JOYTEGH, at its option, will repair or replace the product at no charge. JOYTECH products are tested to withstand norma! wear and tear, but are not indestructible and can be damaged if misused. The JOYTECH warranty does not cover norma! wear and tear.or abusive use. This warranty does not apply to products used for any industrial, profes-
sional or commercial purpose. This warranty does not apply to prod-
ucts that have been damaged by abuse, misuse, modification or tam-
pering or by any other cause not relating to either materials or work-
manship. If a replacement is necessary and your product is no longer available, a comparable product may be substituted at JOYTECH sole discretion. For Tech support please consult the JOYTECH website at www. joytech. net