FCC ID: G95-RD900WB 900 MHz Transceiver

MARSTECH LIMITED EXHIBIT A

[FCC Ref. 2.1033(b)(3)]

"Installation and Operating Instructions Furnished to the User"

Thomson/RD900WB EXHIBIT A FCC ID: G95-RD900WB Marstech Report No. 22295D FCC ID: G95-RD900WB Marstech Report No. 22295D EXHIBIT A(1) Important Information WARNING | WARNING To reduce the risk of electric shock, do not remove cover (or back). No RISK OF ELECTRIC SHOCK DO | user serviceable parts inside. Refer To reduce the risk of fire or NOT OPEN servicing to qualified service electric shock, do not expose personnel. this product to rain or moisture. This symbol indicates This symbol indicates dangerous voltage inside important instructions the product that presents a accompanying the risk of electric shock or product. personal injury. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. Product Registration Please fill out the product registration card (packed separately) and return it immediately or register on-line at rca.com. Registering allows us to contact you if needed. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. The numbers are located on the back of the product. Model No. Serial No. Purchase Date: a Dealer/Address/Phone: a ctuaaeececeecenucececceesaeeasecccecsucccesseuecens 3 Protect Against Power Surges.....sssscssssssssssssssssssssesssssssssssssssssscssssssssssssssitieesssseseeseeeeeceececcc 3 Protect Components from Overheating ...cciccscsssssssssssssssssssssssssssssssssssesssssssesoeeeeeeseecccccccee. 3 Position Cables Properly to Avoid Audio Interference cccssssssssssssssssscscccssseseeecoseeececcccccccee. 3 Connection PICtUIeS oc essssssssssssecsssssessssssssssssssessssssssssssssssssssussssitsssistutiessseseeccceseccccccsecccc 3 Audio System Requirement .......ssssssssssssssssssessscsssssssssessessesatsscssesscenesasssess 4 Computer System Requirements .......scsscssssssssssssssssscsesssssssesessseseseeseceseseeees 4 Windows PC Requirements .....sssssssscssssssssessssssssssssssssesusssssssssssssssssssssisesessessesseseeeeeeeececcccccc 4 Unpack the box and check your parts ......ccssssssssssssssssseseseesesesoeseceeececc... 5 Front of the Lyra Wireless Units .......ccsssscscssssssssscsssssssssesesesecesseseceesececcen. 6 Back of the Lyra Wireless Units .......cccssssssscssssscssessssssssstesesesseecsccoesececcce, 6 Connecting the Lyra Wireless Transmitter to your Computer .......cccsees 7 Connecting the Lyra Wireless Receiver to your Audio Receiver ............ 8 Improving Performance .....sssscsssssccsssssssssessssssssesesssatacsessssasaseteesessesesceeseeeess 9 Orientation of the Antemmas ...ccsssccssssssssssssssssisssssssssssssssssssssessessesssssssssssssssesessesseesssssccccccccee 9 Fine Tuning the Lyra Wireless..........sssssscscsssssssssssesarsesssesesstseseceeseeeeceeseeses. 9 IF there is NO Signal at all. cssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssstessssseeeeeeececceccccc 9 If the signal is weak or there is interference ...u...cssssssssssssssssssssssesersssssssccsssssseeeeeccgcccccccc 10 AvOiding Interference ........sssssssssesssssssesesessessssssasseserstsssssssasssssseeeoceeeseeees 10 Cordless Phone and Baby Monitor Interference ...cccccccccccccssssssssssssseseceececcesesesscccccccccceccae 10 Chapter 2: MusicMatch and the Lyra Wireless Install the software On YOUF COMPUTED ...cccccecccscssssssssssssssssssesesssssssssssssssssstsessecceeeeseeseecccccccc 11 Launching MusicMatch ........ssssssscssssssssssesessesssstssseracsesarassestrensesessseeeeeees 13 Launching the Remote Control Software ceccccccccccoseseceee..-s-.. sectatatansestsees 14 Turning Off the Chime ....u...scsssssssssssssesssssssssssssssssssssssssssssssssssssesssssstisisssssssesiseccesesesseseeccecceeccee 14 Closing the Remote Control Software wecccsssssssssscccsssssssssssssssssssssssssssssssssessssssssseeccccccecsccce 14 AUdIO Stup .....sssssssssseesssssessssssessorssesssussssescasessssssessessevarsustassesateseeseeseseeeses 15 SELTINGS 1M MUSICMAtCH o.un....csssssssssscsssssssssssssssssssssssssssseeeeseessssnsssssssssssssssssesssssssaseseeseeeecesseseee 15 Soundcard Settings in Your Computer's Control Panel ..ccccccccsssssssssssssssseseccocseecccccssssssce. 16 CD-ROM Settings in Your Computer's Control Panel ....csssecssssssssssssssssssssesessecsecsccscsssceecc 17 More on MusicMatch ......cssssssssesssssssssssecssssesssesssatatataseracerasassrererseseeeeenees 18 Table of Contents OT Point the Remote in the Right Direction to Control the Component You Want .........ssssssscsssssssssssssssscessussessseeeseesseesece: 19 Playing Music through the Lyra Wireless ...........:.csssssssssssssssssssessesseseseces 20 Fine Tuning the Lyra Wireless..........ccssssssssscscssscesscssssssesscssseserssesecescess 20 If there iS NO Signal at All. sssescssssssssssessescessssssssssssssssssssssssesssssssssssssssesesseeeeseeseeeececcee 20 If the signal is weak or there is interference ...c...scccscsssessssssssssssssssssisssssssessseecssecccccsesecceese. 20 Improving Performance ......sscsscssssssssscesssssssssscerecessssersecsessatsssaresseseeseseeeees 20 Orientation of the Antennas ..........csssssssssssssssssssssssccrssssssssssssssssesssssssesssssesesstssecesescccseesecess 20 Using the Remote with MusicMatch...........scccsssssssssssssssscecsesssssceccesseceeeee 21 Launching MusicMateh ou.....csescssssssssecsssssesssssssssssssssssesssssssessssssssessssssssssssussssstescesseeseccessecccese 21 MUSIC SOULCES wecscessssssssssscssseesssstecessssessssscesssssssssssssecessusecssssssesssssssetsssssassissssssuesssessecsessesceceecccc 21 Playing MUSIC .....ssssssssssssssssccsssssesssssssssessssssssesssssssssssssasussestsssessssssssssssssssasssssesessstesecsssseeecceseseccs 21 Changing Tracks and Scanning Within a Track ....ceesccssssssssssssesssssssssssssssesscsssececcesseecccecsesce 21 Adjusting the Volume o......eesssssssccssssssssssssssssssssssesssssecsssssesssssssesssssesssssssssissstitessessccseescesesccce 21 Changing Playlists and Internet Radio Stations .....c.cssssesssssssssssssssssssssssscssescsseseccceseeccces 21 Repeating a Playlist os sssssscssssssecssssessssssessssssssssssssssssssssesssssssssssssssssssssssstussassuesecseesccecsescee 21 BUYING MUSIC ...ssesssssssssssssseecsssssecsssssecssssssessssssssesssssssesncsssussssssssssssesssusscestssssasssisessssescccssseeccess 21 Other Buttons on the Remote Control ........s.cssssssssscsssssssssscsseceeesecsescecces 22 Programming the Remote to Operate Other Components..........s..s.s00+. 24 Find Out If You Need to Program the Remote ......cccccccssssessssssssssssssssesessssescceseseeceseeeecccccee 24 Programming the Remote .......sssssssssssscssssssssssssssssssssssssssssssssssesssesssssssttssssssssssttesessececesseseseeccc 24 How to Use the Remote After You've Programmedm It vecccccccscccscssssccssossssecccccsceecccccccscccce 25 Code List wc. sssssssessssesssrscsesssessussassssssessessasasacsserstecesuavasseseererseseseseseeseosses 26 Chapter 3: Additional Information Troubleshooting .......csssssssssssssesscsessssssssessasseessasasasseatatststersausttavaresessesessecens 31 Care and Cleaning ......ssssscssssssessesssccsssssssssecsssetssacsesatacsesacacsusascanaraucessesseeess 32 FCC Declaration of Conformity and Industry Canada Information...... 33 Limited Warranty ........cssccscssssssssccesssssesssssssesscesecsssersseestsssasessesseececceesceece, 34 Chapter 1: Connections and Setup CNT Pe LONE CUHIONS aNd Setup Chapter 1: Connections and Setup Things to Consider Before You Connect Protect Against Power Surges e Connect all components before you plug any of their power cords into the wall outlet. e Turn off all components before you connect or disconnect any cables. Protect Components from Overheating e Don't block ventilation holes on any of the components. Arrange the components so that air can circulate freely. e Don't stack components. e When you place components in a stand, make sure you allow adequate ventilation. e If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it wont flow around other components. :

Position Cables Properly to Avoid Audio Interference e Insert each cable firmly into the designated jack. If you place components above the TV, route all cables down the side of the back of the TV instead of straight down the middle of the back of the TV. Connection Pictures Audio cables are usually bundled together. For better visibility, the connection pictures in this book show each cable separately (audio left, audio right, and video). Chapter 1 3 Chapter 1: Connections and Setup ll Audio System Requirements Audio receiver with auxiliary inputs (line level) or other component with audio inputs (TV, VCR, etc.). Computer System Requirements Windows PC Requirements e Pentium 300MHz or higher e Windows 98SE, Me, 2000, or XP e Microsoft Internet Explorer 5.0 or higher e Internet access e 50MB free hard disk space 400MB for MusicMatch Juke Box Radio MX feature (recommended) e 96MB RAM (32MB for Win98) e CD-ROM drive capable of digital audio extraction Available USB port e 16-bit color video card Windows is a trademark of Microsoft Corporation, registered in the U.S.A. and other countries. 4 Chapter 1 Chapter 1: Connections and Setup Unpack the box and check your parts All of the items shown below should have come packed in the box with your Lyra Wireless. Fae st yf |

MS:

4 40 x >

00D AG:

2 O}

1G, 8: a

i L 87:0 000 Yi 0;

; O Ox Lyra Wireless Transmitter Lyra Wireless Receiver | Remote control and batteries Music Management CD Contains the Lyra Wireless remote control Larger power supply for Smaller power supply software and MusicMatch software (for transmitter unit _ for receiver unit Windows only) Part number: 5-4146 Part number: 5-4147 Line out cable Part number: 5-4140 Part number: 5-4138 Chapter 1 5 Chapter 1: Connections and Setup Front of the Lyra Wireless Units Remote control antenna Signal Strength indicators Power indicator Power indicator Antenna Antenna Transmitter Receiver Back of the Lyra Wireless Units Power jack ON switch CHANNEL USB jack Power jack CHANNEL LINE OUT jack

\ Transmitter Receiver Remote control antenna 6 Chapter 1 Chapter 1: Connections and Setup Connecting the Lyra Wireless Transmitter to your Computer 1. Connect the small end of the USB cable to the USB jack on the back of the Lyra Wireless transmitter and the other end to the USB jack on your computer. 2. Connect the small end of the large power supply to the power jack on the back of the Lyra Wireless transmitter and the other end into an AC outlet. |

3. Make sure the ON switch is set to ON (the power indicator comes on). 4. Make sure the CHANNEL switch is set to the same channel as the CHANNEL switch on the Lyra Wireless receiver. 5. Raise the antenna on the front of the unit so that it is straight up. 6. Position the transmitter so that it is facing in the general direction of the receiver. 7. Follow the steps on the next page to connect the Lyra Wireless receiver to your audio receiver. Chapter 1 7 Chapter 1: Connections and Setup C 1. Connect the small end of the audio cable to the LINE OUT jack on the back of the Lyra Wireless receiver and the other ends (the red and white plugs) to the Audio Input jacks (sometimes labeled Aux or Line ) on your audio receiver. Also, make sure to put your audio receiver in the right mode to receive the sound from those jacks. r 2. Connect the small end of the small power supply to the power jack on the back of the Lyra Wireless receiver and the other end into an AC outlet. 3. Make sure the CHANNEL switch is set to the same channel as the CHANNEL switch on the Lyra Wireless transmitter. 4. Raise the antenna on the front of the unit so that it is straight up. 5. Position the receiver so that it is facing in the general direction of the transmitter. 8 Chapter 1 Chapter 1: Connections and Setup ree at DTU Improving Performance Orientation of the Antennas Proper orientation of the antennas is important for good performance. You may find that the system works better with one or more of the antennas in the horizontal (flat) position. The receiver and transmitter tend to operate better in high locations, where the signal path is wider and stronger (on a shelf, for example). Watch the receiver signal strength indicators for indication of signal strength. You may also need to experiment with the position of the remote control antenna on the transmitter unit. See what position works the best for the remote control. Lyra Wireless Receiver wee 7 s.

= Table or high shelf Lyra Wircless

. L Transmitter Table or high shelf x = The Lyra Wireless system can transmit The Lyra Wireless transmitter and receiver __ through walls and floors (up to 100 ft.). antennas can rotate to multiple positions. You may want to try several different angles for the best reception. Fine Tuning the Lyra Wireless To get the best signal reception, the Lyra Wireless units should face each other using an imaginary "line of sight. You can place the transmitter and receiver in separate rooms, or even separate floors of your house, so you don't have to worry about the units being close to each other. Other barriers in your house may affect the signal, so you may need to adjust the positions of the transmitter and receiver somewhat. If the transmitter is sending the signal to the receiver properly, you should see some of the receiver's signal strength meter indicators light up. If there is no signal at all Make sure the CHANNEL switch on the back of both units is set to the same number. eee Chapter 1 | 9 Chapter 1: Connections and Setup ee eeeeeeeeeeeeSeSeeSSSesesiCC If the signal is weak or there is interference Try changing the channel on both units. Make sure the CHANNEL switch is set to the same channel on both units. Avoiding Interference Cordless Phone and Baby Monitor Interference The transmitter and receiver have 4 RF channels to choose from, but if you have a 900Mhz cordless phone or baby monitor, you should pick a channel that doesn't interfere with the frequency the phone/

monitor transmits on. Channel 4 is typically the channel with the least interference with telephones and baby monitors. If you have interference, leave your cordless phone or monitor on, then switch to a channel on both Lyra Wireless units that is clear. 10 | Chapter 1 Chapter 2: MusicMatch and the Lyra Wireless Chapter 2: MusicMatch and the Lyra Wireless Install the software on your computer In order to play music through the Lyra Wireless system, you need to install some software first. The Music Management CD that came with your Lyra Wireless contains all of the necessary software components you need. These components do the following:

e use the MusicMatch Jukebox software to organize your music collection and play it through the Lyra Wireless system e enable you to use the remote control for easier navigation through MusicMatch The MusicMatch Jukebox software compresses audio files (from music CDs) to the MP3 format so you can play them through the Lyra Wireless system. The MusicMatch software also enables you to play music from internet radio. 1. Turn on your computer and place the Music Management CD that came with your Lyra Wireless into your computer. 2. If the setup screen does not appear, double click My Computer, double click your CD-ROM drive icon, and double click install.exe. You can also click, Run, then type D:\install.exe (where D is the letter of your CD-ROM drive). (The Lyra Wireless Quick Start screen appears.) 3. Click Install Remote Control Application to install the Lyra Wireless remote control application. SOO SERS SECIS ARE COE HOT Vein Sidhe LAAN Oe Bet |

LAOREET RANTES WHER UR 4. When the RCA Lyra Wireless Setup screen appears, click Next to begin setup. 5. Read the License Agreement and click Yes to continue the installation. The Lyra Wirelnax Quick cnt 6. Click Next to select the destination location of the screen. installed files. 7. Click Next to install all necessary files. 8. Click Finish to complete Lyra Wireless remote control software installation. Notes:

e = /fyou're running Windows 98SE, you may need to install several different system software components. Don't cancel setup before it says itis finished. Also, your computer may reboot itself between installation of the software components. e = /fyou're re-installing the Lyra Wireless remote control software, you need to close the remote control software first, if itis running. Right click on the transmitter tower icon in your computer's system tray (the software menu appears). Click Exit. When you start to re-install the software, the computer asks you to confirm that you want to re-install it. eee Chapter 2 11 Chapter 2: MusicMatch and the Lyra Wireless SRA SUSI HRW ER Teles Wabi Radleate $a Liat. dock eapabarsntold PPE RL ERRILTS Rie SIRES, Logie:

OE ETRE TTS CF eal

| pene: ear RG arta a aS 3 rs 2 The Lyra Wireless Quick Start screen. screen. 12 9. When the remote control software installation is complete, click /nsta/l MUSICMATCH Jukebox on the Lyra Wireless Quick Start screen to install MusicMatch. 10. When the MusicMatch Jukebox Setup screen appears, click Next to begin setup. Note: It is recommended to uninstall any previous installations of the MusicMatch Jukebox software before proceeding. After the uninstall process has been completed, delete the C:\Program Files\MusicMatch folder from Windows and where C:\Program Files is the path where the software was installed. 11. After you've read the license agreement, click Yes to accept (to continue, you must click Yes), or No to decline. If you click Yes, the User Registration Information screen appears. 12. Enter your name, e-mail address, postal code, country, year of birth, and sex (male or female). Note: You must enter an e-mail address to proceed. If you don't have an e-mail address, enter yourname@xyz.com 13. Click Next (the Personalize Music Recommendation screen appears). Read the screen to determine if you want to use this feature or not you can always change the setting later. Select Yes or No. 14. Click Next (the Installation Options dialog screen appears). Select Express Setup and click Next to continue

(the installation starts). 15. After the installation is complete, click Finish. 16. If necessary, close the main setup screen. 17. Some computers might request that you reboot your computer (a dialog box will appear on the computer screen if this is necessary). e To view the MusicMatch Jukebox tutorial, click Tutorial on the Quick Start screen. e To exit the Quick Start screen, click Quit. Chapter 2 Chapter 2: MusicMateh and the Lyra Wireless een Launching MusicMatch The MusicMatch software converts audio files to the MP3 format so you can play them on your Lyra Wireless. This The MusicMatch icon found in your section describes some basic MusicMatch features and computer's system tray. explains how to convert music to the MP3 format. For more information about MusicMatch, see the tutorial on the Lyra Wireless Quick Start screen or go to www.musicmatch.com. 1. Remove the Music Management CD from your computer. 2. Start the MusicMatch Jukebox software (click on the MusicMatch icon in your system tray or on your desktop). SEN ate ERENCE aE Lee a eaee US OSS Ne AGM eine a 3. The first time you launch MusicMatch, a Getting Started screen appears providing information about MusicMatch and the software. Wat tte HU ROARTCH betes etek sereiryt Cok. iene eT ees Detail Nek iti NUR OF IRE |

4. Detailed information, Getting Started tips, and troubleshooting are available through the Help menu and the MusicMatch internet site (accessed from the Help and Site menus). We recommend you familiarize yourself with the MusicMatch Welcome Tips and view the On-line FAQs before using and recording files. Note: Logging onto the internet while using MusicMatch Jukebox takes advantage of all its features. 5. Choose Settings under the Options menu to customize the MusicMatch Jukebox functionality. Note: You can access the Options menu at almost any time by pressing the right mouse button. BI al I ee a eee a ee The MusicMatch Jukebox Getting Started screen.

-_ --rOowmYvOm eee Chapter 2 13 Chapter 2: MusicMatch and the Lyra Wireless"

eee Launching the Remote Control Software The remote control software is automatically launched every time you start your computer, but if you need to launch it manually, follow these steps:

If you have Windows 98SE, 2000, or Me 1. Click on the Start icon in the lower left-hand corner of your screen. 2. Select Programs, followed by RCA Lyra Wireless. If you have Windows XP 1. Click on the Start icon in the lower left-hand corner of your screen. |

2. Select All Programs, followed by RCA Lyra Wireless. When the Lyra Wireless remote control software is launched, you ll see a TV transmitter tower icon in your computer's system tray. The Lyra Wireless Remote Control icon found in your computer's system tray. Turning off the Chime PE You may want to turn off the chime sound the computer makes each time you press a valid button on the remote. To do this, right click on the transmitter tower icon in your computer's system tray (the software menu appears). Click Chime Sound. The Lyra Wireless software menu. Closing the Remote Control Software To close the remote control software, right click on the transmitter tower icon in your computer's system tray (the software menu appears). Click Exit. 14 Chapter 2 Chapter 2: MusicMatch and the Lyra Wireless Audio Setup Depending on how your computer is currently set up, you may have to make some adjustments so that the music and sound are directed to the right places. You may need to make sure MusicMatch is configured properly, too. Settings in MusicMatch 1. Make sure the MusicMatch application is launched on your computer. If it's not, press the LYRA WIRELESS button on the remote. 2. From MusicMatchs main menu, click on Options and then Settings. 3. Select the Player tab, then click on the arrow under Output Control and select USB Audio Device (or Lyra Wireless for Windows XP). Note: For Windows 98SE, 2000, and Me, the Lyra Wireless is recognized as a USB Audio Device." If there is more than one USB audio device, the system numbers all the devices. The MusicMatch Settings screen for Windows 98SE, 2000, and Me. oo MMM Seem us bene The MusicMatch Settings screen for Windows XP. |

Chapter 2 15 Chapter 2: MusicMatch and the Lyra Wireless Soundcard Settings in Your Computer's Control Panel Note: This setting is to configure the chime sound and Windows sound prompts to play through your computer's sound card. If you want them to play through the Lyra Wirless, select USB Audio Device (or Lyra Wireless, for Windows XP) under the preferred device setting. saa hahAh ae ss If you have Windows 98SE or Me eet 1. Click on the Start icon in the lower left-hand corner of i SS LS

ee your screen. i eha ds: Dane ACB Me Ne Earner 4 . | 2. Select Settings, followed by Contro! Panel (the Control 3. Double click on the Multimedia icon, and select the Audio tab. Click on the arrow under Preferred device and make sure your sound card is selected.

ANGI ;

Ae ae Dae so

( ERT La hs FNS ye Pees e Alt s NS ie a eee SRE ES eae:

Ape Zao ANG esc rauts Ae ae PS OOO ea sie Ve sO ree od :

ae te Aol Ee: *

. rath aus Perks ee aed K a If you have Windows 2000 1. Click on the Start icon in the lower left-hand corner of your screen. 2. Select Settings, followed by Contro/ Panel (the Control Panel window appears). 3. Double click on the Sounds and Multimedia icon, and select the Audio tab. 4. Click on the arrow under Preferred device and make sure your sound card is selected. The sound card settings screen for Windows 2000. 16 Chapter 2 Chapter 2: MusicMatch and the Lyra Wireless OANA Lal Lala Coat aa If you have Windows XP

" cutee es | 1. Click on the Start icon in the lower left-hand corner of Saad rdineoarh cueing cole son u your screen.

(ae 2. Select Settings, followed by Contro! Panel (the Control ore | Panel window appears). 3. Double click on the Sounds and Audio Devices icon, and select the Audio tab. 4. Click on the arrow under Default device and make sure your sound card is selected.

= anh . oy etesunj pence ree ha doea ts pec RECORD ein | oes Seas aan ca eda The sound card settings screen for Windows XP. Rs EI Mhadavecekas Popeaces facn ye

SINS ES ar ee es CROOK CD-ROM Settings in Your Computer's Control Panel 4 a pep rasan y ALES ac Raeenye poe aa petri , pa eee SN i: dio4 xy re ALLS FECES STS PALO a y If you have Windows 98SE or Me Weare reat ee meek eee F|. Click on the Start icon in the lower left-hand corner of ne ete Sea oo : | your screen. ee 4) 2. Select Settings, followed by Contro! Panel (the Control Panel window appears). 3. Double click on the Multimedia icon, and select the CD Music tab. 4. Under CD-ROM Selection, click the box for Enable digital CD audio for this CD-ROM device. yas AW pts The CD-ROM settings screen for Windows 98SE and Me. Chapter 2 17