FCC ID: 2AGR4-100937B Truman Dual Wireless Charger and Headphone Stand

Truman Dual Wireless Charger and Headphone Stand Wireless charger Overview Operation 1. Plug the power adapter into the wall socket. 2. USB-A side connects to the power wall adapter, USB-C side connects to the wireless charger side, the LED light will illuminate blue which means the unit is ready to charge your device. 3. Place your device on to the charging stand, the blue LED light will be pulsing which denotes the device is being charged. Power Adapter Note: Only the QC2.0/QC3.0 Standard power adapter can support this product's fast charging. Adapters are not included with the product. Indicating status and protection function 1. LED blue light: Standby 2. LED blue pulsing light: Charging 3. Blue light flashing: Device is not correctly placed on the wireless charger, over temperature protection, or detects metal on the back of the device. Wireless charger Indicator Light USB Micro Cable USB-C Interface IC ID: 21530-100937B FCC ID: 2AGR4-100937B Instruction Manual Specification Input: 9V/3.0A Output: 10W*2 (Max) Charging frequency: 115-148 KHz Transmission Distance: 5mm Efficiency: 75%

Product size: L240*W101*H258mm Packing Truman Dual Wireless Charger and Headphone Stand USBA to USBC type charging cable User Manual Front Cover page 02 page 03 page 04 page 05 FCC Statement This device complies with part 15 of the FCC Rules. Operation is Subject To the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 15 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ISED Statement This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference; and This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

lappareil ne doit pas produire de brouillage;

lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. au cours de l'opration de l'appareil sur une distance de 10 cm autour de l'appareil et de 10 cm au - dessus de la surface suprieure de l'appareil doit tre respect. page 06 Back Cover page 07 page 08 page 09 page 10

C5266091_X10_Ed.1

< The Gem Group, Inc. >

Date: 2021-12-08 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID:2AGR4-100937B To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are the equipment. The public considered as proprietary information in operation of disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Tina Song Title: N/A 1/1

C5266091_X8_Ed.1 Letter of Authorization

<The Gem Group, Inc. >

Company:The Gem Group, Inc. Address:9 International Way,Lawrence,Massachusetts ,United States Product Name: Truman Dual Wireless Charger and Headphone Stand Model Number: 100937-001B 100937-121B FCC Identifier:2AGR4-100937B We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del information Carme, s/n, 08193 Bellaterra, Spain, related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Tina Song Date: 2021-12-08 Title: N/A Signature of applicant:

1/1

The Gem Group, Inc. Model Difference Product description: Truman Dual Wireless Charger and Headphone Stand Model name: 100937-001B 100937-121B Trade Name: N/A FCC ID:2AGR4-100937B Regards Sincerely All the model are the same circuit and RF module, only for model name. Clients signature:

Clients name / title :Tina Song(N/A) Contact information / address: 9 International Way,Lawrence,Massachusetts ,United States