FCC ID: 2ACCE-BT030 Vivitar Bluetooth Speaker

PORTABLE BLUETOOTH SPEAKER Art No.: TS-030B Features and Specifications Output Power: 3Watt x 2 Frequency Response: 180Hz 20KHz RMS: (THD=10%) 2.0 Watt Driver: 1.5"*2 Power Supply: USB, DC 5V 500mA Distortion: <0.5%

S/N: >65dB Battery Capacity: 1200mAh Battery Play Time: 4 hours Battery Charging Time: 4 hours Product Size: 120L* 40W * 135H mm Product Weight: 392g Package Contents 1. 2. 3. 4. Charging the Speaker 1. Speaker User Manual USB to Micro-USB Cable 3.5mm Audio Cable 2. 3. 3. 4. 5. 6. 4. 5. Bluetooth function set up 1. 2. Your TS-030B should come with enough power to pair with your device. If you are having trouble with pairing or powering on the TS-030B, please make sure it is fully charged. To charge the unit, connect the supplied micro USB cable to the DC in jack of the unit and the powered USB slot of your charging device. The battery charge indicator will change red while charging and turn off when the battery is fully charged. In order to speed up the charging time, switch off the speaker during the charging process. The playback time depends on the volume level. The unit beeps in doo doo doo when its battery power is closed to be run out. Note: Battery life varies by use and setting. Place speaker within 30ft of the Bluetooth-enabled device. Slide the ON/OFF button to ON. Once switch on the unit, it will automatically enter into paring mode and the indicator light flashes green quickly. Follow the instructions of your device to search for the speaker. The speaker is called TS-030B. If you are prompted for a PIN, enter 0000 (four zeros). Once paired, you can hear a voice indicator. When paired successfully both the speaker and your Bluetooth device will store the last connected device. Now you can play music from your iPod/iPhone or mobile phone through the Bluetooth speaker. When you use the same Bluetooth device to connect to the speaker there is no need to use the password. To disconnect the current connection, please press and hold the phone button till the green light flash quickly. 7. Based instructions 1. 2. Bluetooth mode Press the + or - button to adjust the volume. Press the << or >> to swipe forwards or backwards to skip songs. 3. 4. 1. 2. 1. 2. 3. 4. 5. To Pause and resume play of the music track, press the play/pause button on the speaker or the Bluetooth device. The unit will be turned off automatically if there is no Bluetooth connection in 15mins. Speakerphone mode When there is a coming call, music play pauses. Pick up the phone call by press Phone button. You can talk through the microphone on TS-030B. Music play resumes when your call ends. To reject an incoming call, please press and hold the phone button on the top. Aux-in mode Connect a 3.5mm audio cable to the 3.5mm audio input on the speaker and an audio output on an MP3 player or other audio sources. Speaker will switch to Aux-in mode automatically. The mode indicator light turns to green and start flashing slowing. Play music from your external device and enjoy it. Press the Volume +/- button or native controls on the connected MP3 player to control volume. To Pause and resume play of the music track, press the play/pause button on the speaker or native controls on the connected Mp3 player. FM radio control Please insert Aux-in cable as antenna. Press BLUETOOTH key and switch to FM mode, where the LED green light is flash on. Press the PLAY/PAUSE to start searching for all available FM radio stations, till it stops. Press the << or >> to choose FM channels one by one. To reduce the risk of electric shock, do not attempt to disassemble the device. Do not use this product in an aircraft or in a hospital. Do not expose the device to direct sunlight, heat or flame. The device may become warm while charging. 1. 2. 3. 4. Safety information 1. 2. 3. 4. Caution 1. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. The music streaming may by interrupted by obstacles between the device and the speaker, such as walls, metallic casing that covers the device, or other devices nearby that operate in the same frequency. 2. 3. Speaker button functions (from the left to the right) 1. 2. 3. 4. 5. 6. 7. 8. Microphone Bluetooth button Hands-free Play/pause Previous song Next song Volume down Volume up. FCC Caution. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Test Report Page 16070349-FCC-E 21 of 28 Annex B.ii. Photograph: EUT Internal Photo Cover Off - Top View Small Mainborad - Front View Small Mainborad - Rear View Mainborad - Front View Mainborad - Rear View Battery - Front View Test Report Page 16070349-FCC-E 22 of 28 Battery - Rear View BT - Antenna View

Test Report Page 16070349-FCC-E 20 of 28 Annex B. EUT And Test Setup Photographs Annex B.i. Photograph: EUT External Photo EUT - Front View EUT - Rear View EUT Top View EUT - Bottom View EUT - Left View EUT - Right View

@inj2Id Mojeq SeWUN ay} JO WO}0g 34} UD suonIsod ee LT O0La-399V2 di 994 AS OG :3ndu BuyBseyD ZHM0Z - ZHOSL AONANDAYS ON WALI fel et]

ysiuy ssoj6 yOe/q UO 8}1YM :10]09 ww S'yZX Spy :eZIS jaqe| Buyes yonpoig

Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (current) Revision History To 1.0 2.0 3.0 4.0 5.0 From 1.0 1.0 2.0 3.0 4.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 TOPSAIL (HONG KONG) LIMITED 2016-04-13 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, TOPSAIL (HONG KONG) LIMITED hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s):

Product description : Portable Bluetooth Speaker model name: TS-030B FCC ID: 2ACCE-BT030 Sincerely, Clients signature Clients name / titleAmy Ko/ Manager Contact information / addressUnit 04, 7/F, Bright Tower Building, No. 33 Mong Kok Road, Kowloon SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template& Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete)

(current) Revision History To 1.0 2.0 3.0 From 1.0 1.0 2.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 3.0 4.0 4.0 5.0 March-26-2015 Nov 19 2015 SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 5.0 TOPSAIL (HONG KONG) LIMITED 2016-04-13 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ACCE-BT030 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

- e.g. Block Diagram

- e.g. Schematics

- e.g. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature :

Clients name & title : Amy Ko/ Manager Contact information / address: Unit 04, 7/F, Bright Tower Building, No. 33 Mong Kok Road, Kowloon SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 5.0