FCC ID: TE7NC210 HD Wi-Fi Cloud Camera

NC210 HD Wi-Fi Cloud Camera 1910011585 REV1.0.0 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Adapter shall be installed near the equipment and shall be easily accessible. Caution Please make sure the temperature for adapter will be from 0 C to 40 C. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1 This device may not cause interference, and 2 This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1 lappareil ne doit pas produire de brouillage;

2 lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:

. NCC Notice BSMI Notice

,

. Safety Information When product has power button, the power button is one of the way to shut off the product;

when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Dont disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adapter. Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us. Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment:

Product Description: HD Wi-Fi Cloud Camera Model No.: NC210 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:

Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU The above product is in conformity with the following standards or other normative documents EN 300 328 V1.9.1 EN 301 489-1 V1.9.2 & EN 301 489-17 V2.2.1 EN 55022: 2010 + AC: 2011 EN 55024: 2010 EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 +A2: 2013 EN 61000-3-2:2014/EN61000-3-3:2013 EN 62311: 2008 The product carries the CE Mark:

Person responsible for making this declaration:

Yang Hongliang Product Manager of International Business Date of issue: 2016-03-24 TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China CONTENTS 2.3.1 2.3.2 Chapter 1 About this Guide.................................................................................... 1 1.1 Conventions..................................................................................................................1 1.2 Overview of This Guide ................................................................................................1 Chapter 2 Get to know about your camera ........................................................... 2 2.1 Product Overview .........................................................................................................2 2.2 Main Features...............................................................................................................2 2.3 Panel Appearance ........................................................................................................3 Front Panel ........................................................................................................3 Rear Panel.........................................................................................................4 Chapter 3 Set Up Your Camera .............................................................................. 5 3.1 Set up the Camera with the tpCamera APP..................................................................5 3.2 Position Your Camera ...................................................................................................6 Chapter 4 Configure Your Camera......................................................................... 8 Log in to Your Camera ..................................................................................................8 4.1 4.2 Live View ......................................................................................................................9 4.3 Basic........................................................................................................................... 11 Basic > Status .................................................................................................. 11 Basic > Network...............................................................................................13 Basic > Wireless Connection ...........................................................................14 Basic > Cloud Setting.......................................................................................16 Basic > LED .....................................................................................................17 4.4 Advanced....................................................................................................................17 Advanced > Status...........................................................................................18 Advanced > Network........................................................................................18 Advanced > Wireless Connection ....................................................................21 Advanced > Cloud Setting ...............................................................................21 Advanced > Video............................................................................................21 Advanced > Sound Detection ..........................................................................22 Advanced > Motion Detection ..........................................................................23 Advanced > LED..............................................................................................24 4.5 System........................................................................................................................24 Account............................................................................................................25 4.5.1 4.5.2 Date/Time ........................................................................................................27 4.5.3 Management ....................................................................................................29 System Log......................................................................................................31 4.5.4 Appendix: Specifications....................................................................................... 32 4.4.1 4.4.2 4.4.3 4.4.4 4.4.5 4.4.6 4.4.7 4.4.8 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 Chapter 1 About this Guide NC210 HD Wi-Fi Cloud Camera This User Guide contains information for setup and management of the Cloud Camera. Please read this guide carefully before operation. 1.1 Conventions In this Guide the following conventions are used:

The camera mentioned in this Guide stands for NC210 without any explanation. Bold font indicates a button, a toolbar icon, menu or menu item. Symbol in this Guide Symbol Note:

Description Ignoring this type of note might result in a malfunction or damage to the device. 1.2 Overview of This Guide Chapter Introduction Chapter 1 About This Guide Introduces the guide structure and conventions. Chapter 2 Get to know about your camera Introduces the features, application and appearance of the camera. Chapter 3 Set up your camera Introduces how to quickly set up the camera using the tpCamera app and how to position your camera. Chapter 4 Configure the Camera Introduces how to configure the camera using the built-in web management page. 1 NC210 HD Wi-Fi Cloud Camera Chapter 2 Get to know about your camera 2.1 Product Overview TP-LINK Cloud Camera is a versatile solution for home and office monitoring to keep an eye on your home, kids or workplace, whatever you care for most. TP-LINK Cloud Camera is a cloud-based Wi-Fi video monitoring device with free live streaming and remote viewing, which makes it easy to stay connected with what you care most wherever you are. You can view and manage your camera from anywhere over the Internet through the TP-LINK Cloud website or through the tpCamera app for iOS and Android devices. Through the cameras web management page, you can view the status of the camera, and configure lots of settings of the camera, such as network setting, the cloud setting, the motion detection, and the sound detection. With Motion Detection function, TP-LINK Cloud Camera can send you immediate notification by email or tpCamera whenever motion or sound is detected automatically, allowing you to remain aware of whatever is happening on the ground. With a stable high speed Wi-Fi connection of up to 150Mbps for NC210, you can enjoy fluid video streaming with ease. With the adhesive (included) or screws (not included), you can place your camera anywhere you want, on the table, the wall, or even on the ceiling. 2.2 Main Features Advanced H.264 Video - For amazingly smooth HD video streaming tpCamera App - Use the free tpCamera app to set up, view and manage the camera remotely with your iOS and Android devices TP-LINK Cloud (http://www.tplinkcloud.com) access for easy viewing and management Web-based management page for basic and advanced configurations Easy Setup Connect and follow the tpCamera apps instruction to install and operate the camera within minutes Motion & Sound Detection - Immediate notification by email or tpCamera whenever motion or sound is detected Email or tpCamera app notification triggered by motion detection Support wireless 802.11b/g/n with speed up to 150Mbps. 2 NC210 HD Wi-Fi Cloud Camera 2.3 Panel Appearance 2.3.1 Front Panel Microphone System LED Figure 2-1 Front Panel Microphone: The camera has a built-in internal microphone. This microphone is hidden in the pinhole located on the front panel. System LED:

Status Flashing red and green Flashing Red Flashing Green Solid Green Solid Red Indication Ready to connect. Wi-Fi not connected. Wi-Fi connected (local view only). Wi-Fi connected (local & remote view). System restarting. 3 2.3.2 Rear Panel NC210 HD Wi-Fi Cloud Camera Power Jack Heat Emission Holes RESET Button Figure 2-2 Rear Panel Power Jack: The power jack is where you connect the power adapter to the camera. RESET Button: While the camera is powered on, press the RESET button for 5 seconds until the System LED on the front panel turns solid red. The camera will reset and reboot. Note:

It is recommended to use a pen to press the RESET button on the camera. Do not use a sharp object. Heat Emission Holes: These holes are used for heat dissipation. 4 Chapter 3 Set Up Your Camera NC210 HD Wi-Fi Cloud Camera 3.1 Set up the Camera with the tpCamera APP You can install your camera in minutes with the free tpCamera app. Before you start the setup process, get your smartphone and make sure that it is connected to your home network. To use the tpCamera app, your smartphones operating system should meet these requirements: Android 4.1 or higher; iOS 7.0 or higher. Step 1. Power on the camera. Power on the camera using the provided power supply unit. Step 2. Download and install the tpCamera app. Outlet Camera You can download the free tpCamera app from the App Store or Google play. You can also scan the QR code below to download the tpCamera app. OR Step 3. Add the camera to your TP-LINK Cloud account. Launch the tpCamera app, log into your TP-LINK Cloud account or create one if you do not have an account. Then follow the app instructions to add your new camera to your account. When you reach the My Cam screen, you have successfully added your camera and can start to use your camera. 5 NC210 HD Wi-Fi Cloud Camera 3.2 Position Your Camera Before positioning your camera, please keep these safety guidelines in mind:

Keep your camera out of reach of children and pets. Use your camera only indoors, and keep it out of direct sunlight. Make sure its operating temperature is in the range of 0-40C (32-104F). Pick a location which is close enough to a wall outlet. Use only the power adapter that comes with this camera in the package. You can place your camera to your desired location. Just unplug and replug it without having to go through the apps setup again. Place the camera within the coverage of your wireless network. You can place the camera in various ways:

Place it on a flat surface. Stick it with the included adhesive. Mount it as shown below. Detailed instructions on mounting your camera to a wall or ceiling are shown as follows. Before you start to mount the camera, prepare two screws which meet the following requirements. 6 1. Unscrew the camera head. 2. Remove the base cover. NC210 HD Wi-Fi Cloud Camera 3. Use two screws (not included) to secure 4. Put the base cover and camera head back the base. on. After relocating your camera, face it towards the area youd like to view, and then plug the power adapter into a power outlet. Now that youve finished positioning your camera, use the tpCamera app to check that your camera can see what you want to keep an eye on. Adjust its position if needed. 7 NC210 HD Wi-Fi Cloud Camera Chapter 4 Configure Your Camera This chapter shows how to use the cameras web management page to configure the camera appropriate to your needs. In addition to the web management page, you can use the tpCamera app and TP-LINK Cloud (http://www.tplinkcloud.com) to view and manage your camera remotely. 4.1 Log in to Your Camera 1. Make sure your camera is connected to your router wirelessly. Then connect a computer to the router via wired or wireless connection. 2. Find the management IP address of the camera from the web management page of the router. Here we use the web management page of TP-LINK Archer D20 for demonstration. 3. On a computer that connects to the same router as the camera does, open a web browser, type in the cameras IP address in the address field, and press Enter. Here we use http://192.168.1.103 for demonstration. 4. Enter the default username and password (admin/admin). Click Login. The screen will display the monitor video. 8 NC210 HD Wi-Fi Cloud Camera Note:

For the administrator, the default password is admin. We recommend that you change it in the Account menu. (Go to System > Account) If you log in to the camera as an administrator, you can perform all the settings provided by the camera. If you log in to the camera as a common user, you can only view the Live View. After logging as administrator, you can add up to five user accounts in the Account menu. (Go to System >

Account) 4.2 Live View The Live View screen shows you the live video feed from your camera. On this screen, you can capture a picture. 9 NC210 HD Wi-Fi Cloud Camera Symbols Meaning Note The image file will be automatically saved to your computer. If the camera is installed upside down, Flip Image and Mirror should both be checked. Click to capture a still image shot by the camera. Click to vertically flip the current image. Click to horizontally flip the current image. Brightness: Drag the slider to adjust the brightness level of camera. Large value will brighten the current displayed screen. 10 NC210 HD Wi-Fi Cloud Camera Contrast: Drag the slider to adjust the contrast level of the camera. Large value will contrast the current displayed screen heavily. Saturation: Drag the slider to adjust the saturation level of the camera. Large value will saturate the current displayed screen to be more colorful. Preset: Click the Preset button to restore to factory image settings. 4.3 Basic Click the Basic menu to display the submenus including Status, Network, Wireless Connection, Cloud Setting, and LED. 4.3.1 Basic > Status The Status page displays the current configuration information of the camera. All the information is read-only. 11 NC210 HD Wi-Fi Cloud Camera 12 NC210 HD Wi-Fi Cloud Camera 4.3.2 Basic > Network On this page, you can configure your cameras IP address which is used to access and configure the camera. Dynamic IP: Select this option when a DHCP server is installed on the network to issue IP address assignment. With this setting, the IP address of the camera is assigned automatically. Static IP: Select this option when a static or fixed IP address is obtained for the camera. A static IP address will ease your access to the camera in the future. Add your cameras static IP information to your router to avoid IP conflicts. MAC Address: Displays the Ethernet MAC address of the camera. The MAC address is read-only. IP Address: Enter a fixed IP address for the camera in dotted-decimal notation. Subnet Mask: Enter the subnet mask in dotted-decimal notation. The default value is 0.0.0.0. 13 NC210 HD Wi-Fi Cloud Camera Default Gateway: Enter the default gateway in dotted-decimal notation. Primary DNS Server: Enter a DNS address in dotted-decimal notation. Secondary DNS Server: Enter a DNS address in dotted-decimal notation. Click Save to save and enable the settings. 4.3.3 Basic > Wireless Connection On this page, you can configure your cameras wireless connection. Scan: Click to scan the available wireless network. You will get or refresh the Wireless Network List as shown below. 14 NC210 HD Wi-Fi Cloud Camera Wireless Network Name: Displays the wireless networks name. Make sure the camera and your PC connect to the same wireless network, otherwise your PC can't access the camera. Signal: Displays the strength of the wireless signal. Security: Displays the wireless networks security mode. MAC Address: Displays the MAC address of the router. To change the wireless network that your camera is connected to, follow the steps below:

1. Click Scan to get and refresh the Wireless Network List. 2. Select a wireless network from the wireless network list. 3. If the wireless networks security mode is None, simply click connect. If the security mode requires a password, enter the wireless networks password and then click connect. You can select show password to display what youve entered. 4. A pop-up screen will prompt you for the wireless network modification. Click Change, then the camera will connect to the wireless network that you have selected. 15 NC210 HD Wi-Fi Cloud Camera 5. To log into the web management page the camera, you need to connect your computer to the router that your camera is connected to. Refer to 4.1 Log in to Your Camera to find the IP address of your camera and log into the camera again. 4.3.4 Basic > Cloud Setting A Cloud Camera can be viewed anytime and anywhere over the Internet with TP-LINK Cloud service. On this page, you can add the camera to your TP-LINK Cloud account. Note:

1. You can register a TP-LINK Cloud account in the tpCamera app only. If you do not get the tpCamera app, please refer to the Step 2 Download and install the tpCamera app in 3.1 Set up the Camera with the tpCamera APP to register a TP-LINK Cloud account. 2. To add a camera to your TP-LINK Cloud account, make sure that the camera is connected to the Internet. Add Your Camera to TP-LINK Cloud Account If you already have a TP-LINK Cloud account, to add your camera to your account, just enter the TP-LINK Cloud account and password, and then click Register. 16 NC210 HD Wi-Fi Cloud Camera Account: Enter your TP-LINK Cloud account, either E-mail address or username is allowed. Password: Enter your TP-LINK Cloud accounts password. Camera Name: The default value is the camera model. You can change it to an easy-to-remember one. Camera name can contain up to 31 characters. It cannot contain the following characters: \ / : = & < > { }. After your camera is registered successfully, you can go to http://www.tplinkcloud.com to view it. 4.3.5 Basic > LED The cameras LED is on by default. If you want to turn it off, select Off and click Save. 4.4 Advanced Click the Advanced menu to display the submenus including Status, Network, Wireless Connection, Cloud Setting, Video, Sound Detection, Motion Detection and LED. 17 NC210 HD Wi-Fi Cloud Camera 4.4.1 Advanced > Status Refer to 4.3.1 Basic > Status. 4.4.2 Advanced > Network On this page, you can configure the network settings of the camera. IP Address On this section, you can configure your cameras IP address which is used to access and configure the camera. 18 Dynamic IP: Select this option when a DHCP server is installed on the network to issue IP address assignment. With this setting, the IP address of the camera is assigned automatically. NC210 HD Wi-Fi Cloud Camera Fallback IP: If the camera cannot get a dynamic IP address from a DHCP server within limited tries, the camera will assign a default IP address, 192.168.0.10, by itself as the Fallback IP address. Static IP: Select this option when a static or fixed IP address is obtained for the camera. A static IP address will ease your access to the camera in the future. Add your cameras static IP information to your router to avoid IP conflicts. MAC Address: Displays the Ethernet MAC address of the camera. The MAC address is read-only. IP Address: Enter a fixed IP address for the camera in dotted-decimal notation. Subnet Mask: Enter the subnet mask in dotted-decimal notation. The default value is 0.0.0.0. 19 NC210 HD Wi-Fi Cloud Camera Default Gateway: Enter the default gateway in dotted-decimal notation. Primary DNS Server: Enter a DNS address in dotted-decimal notation. Secondary DNS Server: Enter a DNS address in dotted-decimal notation. Fallback IP: If the camera cannot get a valid static IP address, the camera will assign a default IP address, 192.168.0.10, by itself as the Fallback IP address. HTTP (Hypertext Transfer Protocol) This feature allows you to access and manage your camera via its IP address. Web browser access normally uses the standard HTTP service port 80. The camera uses HTTP port 80 by default. For greater security, you can change the port to a custom one. When HTTP port is set to 80, you can access the camera by typing its IP address (for example, http://192.168.1.100) on a web browser. When HTTP port is set to another value (for example, 2000), you need to type http://192.168.1.100:2000 instead. HTTP Port: The default value is 80. If you want to use a port number other than 80, enter a port number between 1 and 65535. Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or configure DNS servers. Bonjour: To enable or disable the Bonjour service. Bonjour Name: Displays the Bonjour name. By default, it is a combination of model and the last six characters of the cameras MAC address. 20 NC210 HD Wi-Fi Cloud Camera Click Save to save and enable the settings. 4.4.3 Advanced > Wireless Connection Refer to 4.3.3 Basic > Wireless Connection. 4.4.4 Advanced > Cloud Setting Refer to 4.3.4 Basic > Cloud Setting. 4.4.5 Advanced > Video On this page, you can configure the video settings for your camera. Coding Format: Displays the video coding format of the camera. Resolution: Displays the video resolution of the camera. Higher resolution offers better quality, but will require more bandwidth to stream. Frame Rate: Select the frame rate to use for the video stream from the drop-down list. Higher settings offer smoother video streams, but will require more bandwidth. Mode: Displays the bit rate mode of the camera. This camera uses the VBR (variable bit rate) mode. In this mode, the bit rate varies to keep consistent video quality. It allows a higher bit rate (and therefore requires more bandwidth) to be allocated to dynamic scenes while less bit rate to be allocated to static scenes. Image Quality: Select the image quality from the drop-down list: High, Medium and Low. High settings offer better quality, but it may require more bandwidth to stream. 21 Backlight Compensation: If enabled, this feature will compensate for bright backgrounds so foreground objects aren't silhouetted. NC210 HD Wi-Fi Cloud Camera Enabled Disabled Light Frequency: Select the frequency used by your lighting and power to help reduce image flicker. The default setting is Auto, which is recommended. Time Stamp&On-Screen Display (OSD): If enabled, the current time of your camera, which can be set on the System > Date/Time page, will be displayed on the Live View screen. Meanwhile, you can set the OSD text to be displayed with the time stamp. We use NC210 as the OSD text for demonstration here. Enabled Disabled 2016-02-14 09:51:21 NC210 Click Save to save and enable the settings. 4.4.6 Advanced > Sound Detection Sound detection allows your camera to detect a loud sound, which can be used to trigger snapshots. 22 NC210 HD Wi-Fi Cloud Camera Sound Detection: To enable or disable the sound detection function. Sensitivity: Specify the level of difference between current sound and the threshold you set. Select one of the three levels of sensitivity from the drop-down list: High, Medium, and Low. Threshold: Select the threshold of sound level. You can also drag the arrow in the diagram to set the threshold. Snapshots will be triggered and sent to your registered Email box when current sound exceeds the threshold. And notification messages will be sent to the tpCamera app in your smartphone. Click Save to save and enable the settings. 4.4.7 Advanced > Motion Detection Motion detection allows you to specify sensitivity of your cameras video to monitor for motion. When you enable this function, the whole area that you can view in this screen is being monitored. 23 NC210 HD Wi-Fi Cloud Camera Motion Detection: To enable or disable the motion detection function. Sensitivity: Specify the level of difference between two sequential images that would indicate motion. Select one of the three levels of sensitivity from the drop-down list: High, Medium, and Low. Snapshots will be triggered and sent to your registered Email box when the motion meets the level of sensitivity. And notification messages will be sent to the tpCamera app in your smartphone. Click Save to save and enable the settings. 4.4.8 Advanced > LED Refer to 4.3.5 Basic > LED. 4.5 System Click the System menu to display the submenus including Account, Date/Time, Management, and System Log. 24 NC210 HD Wi-Fi Cloud Camera 4.5.1 Account On this page, you can change the administrators password and manage the user account(s) that are allowed to access to your camera. Username: Displays the name of user account. User Group: Displays the group that the user account is in. Different user group has different limits of authority. admin: This group has all authority of configuration. It can only have one account: admin. user: This group can only view the Live View. It can have up to five accounts. Add a New User Account You can create a new user account to provide viewing access for your cameras video. User accounts will only be able to access the Live View section of the web configuration page, but cannot access any other parts or change any settings. To add a new user account, follow the steps below:

1. Click Add, and you will see the following screen. 25 NC210 HD Wi-Fi Cloud Camera 2. Enter a username for your new account. 3. Enter a password for your new account. The password should contain 5 to 20 characters. 4. Enter the password again to confirm it. 5. Click Save to save and enable the settings. Change Password You can change the password of all the accounts here. Note:

The default account and password are both admin. Everyone who knows the cameras IP address can access the device with all configuration authority. It is necessary to change the default password if the device is intended to be accessed only by administrator. To change password, follow the steps below:

1. Select a user account in the list whose password you want to change 2. Click Change Password, and you will see the following screen. 26 NC210 HD Wi-Fi Cloud Camera 3. Enter the current password in the Old Password textbox. 4. Enter a new password. 5. Enter the new password again to confirm it. 6. Click Save to save and enable the settings. Delete a User Account You can delete a user account except admin here. Click a user entry in the list and click Delete. 4.5.2 Date/Time On this page, you can configure the settings of the internal system clocks for your camera. 27 NC210 HD Wi-Fi Cloud Camera Current Time: Displays the current date and time of the camera. Time Zone: Select the time zone for the region where the camera is installed from the drop-down list. Synchronize With NTP Server: Select this option to specify the NTP server name to synchronize the date and time of the camera with those of the time server, known as the NTP

(Network Time Protocol) server. NTP Service: You can either enter a domain name of the NTP server or select one which will be filled in automatically from the drop-down list. Set NTP Server from Dynamic IP: You can use the NTP server applied in the DHCP server on the network. Set Date and Time Manually: Select this option to set the date and time of the camera manually. If enabled, you will see the following screen:

28 NC210 HD Wi-Fi Cloud Camera Copy Your Computers Time Settings: Click this button to copy your computers current time settings. Click Save to save and enable the settings. 4.5.3 Management On this page, you can reboot the camera, backup and restore the cameras current settings, reset factory settings, and update the cameras software. 29 NC210 HD Wi-Fi Cloud Camera Reboot: Click Reboot and then click Reboot on the pop-up screen to confirm. Rebooting will not change the cameras setting. After rebooting, you need to log in to this page again. Backup: Click Backup and follow the instructions on the browser to save the setting data file to your specified location. Browse: Click Browse to locate the saved backup file. Restore: Click Restore, and then the camera will start rebooting. The settings will be restored to the previous configuration. Reset: Click Reset to restore the camera to its factory defaults. Don't turn off the camera while resetting. After resetting, you need to add the camera to your TP-LINK Cloud account again, find out the IP address of your camera (refer to 4.1 Log in to Your Camera), and then use the default username and password (admin/admin) to log in to this web management page. Update: Before update, download the product page at http://www.tp-link.com, and then use decompression software to extract the file. Click Browse to locate the latest downloaded software file, and then click Upgrade to update the cameras software to the latest version. Wait for the upgrading process to complete, and the camera will reboot automatically. firmware latest from the Note:

1. The firmware upgrade procedure must not be interrupted or the camera may be damaged. 2. The firmware upgrade procedure is always risky and do not try to upgrade new firmware if its not necessary. 30 NC210 HD Wi-Fi Cloud Camera 4.5.4 System Log On this page, you can review any changes and events happened to your camera. The system starts logging automatically after startup. Time: Displays the time when the log event occurs. The log can get the correct time after you configure on the Date/Time page. (go to Advanced > Date/Time) Module: Displays the module to which the log information belongs. You can specify the module by selecting one from the Module drop-down list at the bottom. Level: Displays the severity level of the log information. You can specify the level by selecting one from the Level drop-down list at the bottom. Content: Displays the details of the log information. Refresh: Click Refresh to refresh the log information. Save Log: Click Save Log and follow the instructions on the browser to save the log as a text file named log.txt to your specified location. Clear: Click Clear to clear all the log information. Log Control: You may be asked to use this function when contacting our technical support for troubleshooting. 31 NC210 HD Wi-Fi Cloud Camera Appendix: Specifications Image Sensor Resolution Lens SYSTEM 1/4 Progressive scan CMOS sensor 1280*720 F: 2.0, f: 2.8mm Viewing Angle FOV=113 Video/Image Video Compression H.264 Frame Rate & Resolutions Up to 20 fps at 1280*720 (HD) Video Streaming Controllable frame rate and bandwidth Rotation: Mirror, Flip, Mirror Flip Image Configurable brightness, contrast, saturation Overlay capabilities: time, date, text Audio Audio Communication One-way Audio Input Built-in microphone Alarm and Event Management Input Trigger Motion detection, sound detection Notification Method E-mail, App notification Network Standards and Protocols Bonjour, TCP/IP, DHCP, ARP, ICMP, NFS, DNS, NTP, HTTP, HTTPS, TCP, UDP Security Multiple password-protected user levels Wireless Data Rate IEEE 802.11b/g/n, Up to 150Mbps Wireless 32 Frequency 2.4-2.4835GHz NC210 HD Wi-Fi Cloud Camera Wireless Encryption WEP, WPA-PSK/WPA2-PSK System Requirements Microsoft Internet Explorer 9.0 or higher Firefox 4.0 or higher Supported Browser Safari 4.1.1 or higher Supported OS Chrome 5.0 or higher Opera 15.0 or higher Windows XP or higher Mac OS X 10.7 or higher Android 4.1 or higher iOS 7.0 or higher General Certification CE, FCC, IC, NCC, BSMI Operating Temperature: 0C ~ 40C (32 ~ 104) Storage Temperature: -20C ~ 60C (-4 ~ 140) Operating Humidity: 10%-90% non-condensing Storage Humidity: 5%-90% non-condensing Environment 33