FCC ID: TE7HS210V3 Kasa Smart Wi-Fi Light Switch, 3-Way

User Guide Smart Wi-Fi Light Switch, 3-Way HS210 1910012319 REV1.0.0 Contents About This Guide 1 Introduction 2 Appearance 3 Set Up Your Smart 3-Way Switch Kit 4 Main Pages 6 Configure Your Smart 3-Way Switch Kit 7 Create Scenes 9 Connect to Amazon Alexa or Google Home 10 Authentication 11 About This Guide This guide provides a brief introduction to Smart 3-Way Switch Kit and the Kasa app, as well as regulatory information. Please note that features of Smart 3-Way Switch Kit may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide, the following convention is used:

Convention Description Teal Key information appears in teal, including management page text such as menus, items, buttons and so on. Underline Hyperlinks are in teal and underlined. You can click to redirect to a website. More Info

. Specifications can be found on the product page at http://www.tp-link.com Our Technical Support and troubleshooting information can be found at http://www.tp-link.com/support. 1 Introduction 3-Way Switching, where a light is controlled from two switch locations, is common in hallways, stairs, and living rooms. 3-Way Switch wiring can be complex, but TP-Links Smart 3-Way Switch Kit makes it an easy smart home upgrade and provides control from anywhere, scheduling, and much more. The Kit includes 2 smart switches specially designed for 3-way switch wiring. The free Kasa app provides step-by-step instructions for wiring your switches and connecting them to your home Wi-Fi network. No Extra Hardware Required - Convenient smart swtiches with no extra hardware required Control Your Lights From Anywhere - Control all of your home lighting using the Kasa app Hands-free Experience - Control your lights by voice commands through support from Amazon Alexa and Google Assistant Scheduling - Program lights to turn off and on at set times throughout the day or night Phone not included;

Works with iOS and Android 2 Appearance Smart 3-Way Switch Kit has two LEDs that changes color according to its status, a RESTART button and a RESET button. See the explanation below:

Green Lit up for about 30 seconds when connected to the Wi-Fi network, then turns off. Blinking Amber and Green App-Config mode initiated. Blinking Amber Resetting. Red No Wi-Fi connection. White Lit up when the light is switched OFF to show the Smart Switch location in the dark. RESTART Press to reboot the Smart Switch. RESET Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks amber rapidly to factory reset the Smart Switch. 3 Set Up Your Smart 3-Way Switch Kit Follow the steps below to set up your Smart 3-Way Switch Kit via Kasa for Mobile app. 1. Download and install Kasa app Go to Google Play or the Apple App Store or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet. 2. Log in or sign up with TP-Link ID Open the app. Use your TP-Link ID to log in. If you dont have a TP-Link ID, tap Create Account and the Kasa app will guide you through the rest. 3. Remove old switches Find the circuit breaker and turn off the power. Remove your old switches but do not disconnect the wires. 4 Set Up Your Smart 3-Way Switch Kit Follow the steps below to set up your Smart 3-Way Switch Kit via Kasa for Mobile app. 4. Wire your new smart switch kit Follow the Kasa app instructions to wire your smart switch kit with the 3-Way wiring method. Then install and secure both switches after the wiring. 5. Set up and pair both switches With your smart switch kit secured, set up your first switch and then pair your second one. Make sure they control the same light. 6. Complete and enjoy Your smart switch kit is all set up and saved in your device list. You can now enjoy using it

. 5 Main Pages After you successfully set up your Smart 3-Way Switch Kit, you will see the home page of the Kasa app. Here you can view the working status of all

. devices that you've added to Kasa and manage them. Tap on a smart switch to check the current status and runtime of your smart switch kit Home Page Device Status 6 Configure Your Smart 3-Way Switch Kit On Device Status page, you can set Schedule, preset Away Mode, set Timer and change the settings of your smart switch kit. Set Schedule Preset Away Mode Tap to set a schedule for your smart switch kit to simplify your daily routine by creating automatic On/Off action. to preset the Away Mode and your off Tap

smart switch kit will be randomly turned on during this time. 7 Configure Your Smart 3-Way Switch Kit On Device Status page, you can set Schedule, Away Mode, Timer and change the settings of your smart switch kit. Set Timer Device Settings to set the time to turn your smart switch Tap kit on or off after specific times. to view and change the settings of Tap your smart switch kit. 8 Create Scenes A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions. 9 Connect to Amazon Alexa or Google Home Connect your Smart 3-Way Switch Kit to Amazon Alexa or Google Home to enjoy a full hands-free experience - control your lights by voice commands. Follow a method below to connect your Smart 3-Way Switch Kit to Amazon Alexa or Google Home. Method 1:

Launch Kasa app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant for detailed instructions. Method 2:

Visit FAQs on the TP-Link official website for detailed instructions:

Google Assistant: www.tp-link.com/us/faq-1534.html Amazon Alexa: www.tp-link.com/us/faq-944.html 10 Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. names are trademarks or registered trademarks of their respective holders. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2018 TP-Link Technologies Co., Ltd. All rights reserved. 11 FCC compliance information statement Product Name: Smart Wi-Fi Light Switch, 3-Way Model Number: HS210 Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. 12 FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2018.1.5 13 Canadian Compliance Statement 1. This device may not cause interference, and This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le 1. lappareil ne doit pas produire de brouillage;

fonctionnement. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) NCC Notice 14 BSMI Notice PCB Pb Cd Hg PBB PBDE 1. " 0.1 wt %" " 0.01 wt %"

2. " "

CrVI Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not allowed. Warnings Install only in a suitable UL Listed outlet box. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. 15 CAUTION - Risk of Electric Shock - More than one disconnect switch may be required to de-energize the equipment before servicing. Supported specified line number for the thread terminal copper wire: 12AWG and14AWG. Tighten terminal screws to 13 lbf-in Supported Load Types:

100-120V~ 15A max, Res 100-120V~ 5A, Incandescent 100-120V~ 5A, Electronic Fluorescent Ballast Operating Temperature: 0 C-40 C (32F-104F) Operating Humidity: 5%-90%RH, Non-condensing Explanation of the symbols on the product label AC voltage Indoor use only RECYCLING Symbol Explanation This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 16

54.5 R3.5 HS210 Kasa Smart Wi-Fi Light Switch, 3-Way Rating: 120 V~ 60 Hz 15 A General Use 600 W Incandescent/LED/CFL

. 5 9 2 TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC HVIN: HS210V3 IC: 8853A-HS210V3 FCC ID: TE7HS210V3 HS210(US) Ver:3.0 S/N:XXXXXXXXXXXXX T r a v e e r l T r a v e e r l UL3.0 C2 54.5*29.5mm 0.2 HS210(US)3.0_ A1 50#PET+

-128 HS210(US)3.0 2020-07-23

TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: August 21, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

UL Verification Services (Guangzhou) Co., Ltd., Song Shan Lake Branch is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____2021/1/13_____ By:

______ __________________ ____________________ ______ Jing Huang

(Signature1)

(Print name) Title:

_____ Regulatory Compliance Manager __ On behalf of: ___ TP-Link Technologies Co., Ltd.__

(Company Name) Telephone:

______ 75521534921 __________ 053019 12

TP-Link Technologies Co., Ltd. Request for Confidentiality Date: August 21, 2020 Subject: Confidentiality Request for: ____ TE7HS210V3_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual TP-Link Technologies Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)3___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, details. 053019 12 By:

_______ _____ ________Jing Huang________________ 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete