|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5
|
Effective |
2022-12-09
|
|
1 2 3 4 5
|
2022-11-14
|
|
1 2 3 4 5
|
Applicant's complete, legal business name |
TrellisWare Technologies
|
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0016791279
|
|
1 2 3 4 5
|
Physical Address |
10641 Scripps Summit Ct. Suite 100
|
|
1 2 3 4 5
|
10641 Scripps Summit Ct.
|
|
1 2 3 4 5
|
San Diego, CA
|
|
1 2 3 4 5
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5
|
TCB Application Email Address |
v******@nemko.com
|
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5
|
Grantee Code |
2A6X2
|
|
1 2 3 4 5
|
Equipment Product Code |
1760
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5
|
Name |
M**** R********
|
|
1 2 3 4 5
|
Telephone Number |
85875********
|
|
1 2 3 4 5
|
Fax Number |
85843********
|
|
1 2 3 4 5
|
E-mail |
m******@trellisware.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | No |
| 1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 | DTS - Digital Transmission System |
| 1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WiFi Module capable of operating in the 2.4 and 5 GHz bands |
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 | Change in Identification |
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 | Grant Comments | Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. DFS operation is slave without radar detection. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz, and 5775 MHz.
C2PC as described in this filing. The highest SAR level is 1.58 W/kg. |
| 1 2 3 4 5 | Single Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.
C2PC as described in this filing. The highest SAR level is 1.30 W/kg. |
| 1 2 3 4 5 | Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. DFS operation is slave without radar detection. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210 MHz, 5290 MHz, 5530 MHz, 5610 MHz, 5690 MHz, and 5775 MHz. |
| 1 2 3 4 5 | Single Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
| 1 2 3 4 5 | Single Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5
|
Firm Name |
Nemko USA, Inc. - San Diego EMC Division
|
|
1 2 3 4 5
|
International Certification Corp.
|
|
1 2 3 4 5
|
Name |
J**** B******
|
|
1 2 3 4 5
|
F******** C******
|
|
1 2 3 4 5
|
Telephone Number |
760-4********
|
|
1 2 3 4 5
|
886-3******** Extension:
|
|
1 2 3 4 5
|
Fax Number |
886-3********
|
|
1 2 3 4 5
|
E-mail |
j******@nemko.com
|
|
1 2 3 4 5
|
J******@icertifi.com.tw
|
|