FCC ID: SWX-U6MESHR Digital Transmission Radio

E-Label User Information FCC ID: SWX-U6MESHR IC ID: 6545A-U6MESHR Ubiquiti Inc. will be incorporating the E-Label procedures per FCC KDB 784748-D02. The information below is what will be included in the E-Labeling. E-label and warning statements can be found in the device/controller GUI under Device >

Settings > About. Detailed compliance information including Declaration of Conformity is available at the following internet address: ui.com/compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generated, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user bill be required to correct the interference at his own expense. ISED Canada CAN ICES-3 (A) / NMB-3 (A) This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (A) / NMB-3 (A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Iappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilize en conflit avec tout autre antenne ou transmetteur.

Datasheet U6-Mesh UniFi 6 Mesh U6-Mesh is a dual-band Wi-Fi 6 ac c ess point designed for indoor or outdoor installation. Its small, sleek design allows plac ement near users for optimal performanc e; plac e it on a desktop or mount it on a pole, wall, or c eiling*. U6-Mesh delivers up to 2. 7 Gbps aggregate radio rate with 5 GHz

( MU-MIMO and O FDMA) and 2. 4 GHz ( MIMO ) radios, and it is c ompatible with FlexHD mounting ac c essories.

* Ceilin g m o u n t s o ld s ep arately. Mechanical Dimensions Weight Hardware Buttons LEDs Power Method Power Supply Max. TX Power 48.5 x 159.5 mm (1.9 x 6.3") Without Mount: 350 g (12.4 oz) With Wall Mount: 357 g (12.6 oz) With Pole Mount: 370 g (13.1 oz) Enclosure Materials Aluminum, Polycarbonate Mount Materials Wall Mount: Polycarbonate Pole Mount: Polycarbonate Weatherproong IP65 Processor Specs 880 MHz MIPS1004 KEc Memory Information 256 MB DDR3 SDRAM Management Interface Ethernet In-Band Networking Interface

(1) 10/100/1000 Mbps Ethernet RJ45 Supported Voltage Range 44 to 57VDC Max. Power Consumption 15W Reset RGB 802.3af PoE, Passive PoE (48V) 802.3af PoE; 48V, 0.32A PoE Adapter 2.4 GHz 5 GHz 23 dBm 26 dBm 2 of 3 2.4 GHz 5 GHz 2.4 GHz 5 GHz 2.4 GHz 5 GHz 2 x 2 4 x 4 3 dBi 6 dBi 300 Mbps 2402 Mbps MIMO Throughput Speeds Antenna Gain Mounting Software Wi-Fi Standards BSSID VLAN Wall/Pole (Kits Included) Ceiling (Sold Separately) Operating Temperature

-10to 60 C (14to 140 F) Operating Humidity 5 - 95% Noncondensing Certications CE, FCC, IC 802.11a/b/g Wi-Fi 4/Wi-Fi 5/Wi-Fi 6 8 per Radio 802.1Q Supported 300+

Advanced QoS Per-User Rate Limiting Guest Trafc Isolation Concurrent Clients Supported Data Rates (Mbps) Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) 802.11n (Wi-Fi 4) 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) 802.11a 802.11b 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 1, 2, 5.5, 11 Mbps 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11ac (Wi-Fi 5) 802.11ax (Wi-Fi 6) 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 7.3 Mbps to 2.4 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) Specications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty 2020 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, UniFi, and UniFiNetwork are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.

fFrnxo Vita i AGEN esa

@18mm

@6mm

(@1/4)

(@11/16) oe 98 90 @

@18mm .

(011/16)

[ow 4) 7 NZ Wi-Fi 4 Download on the

@ App Store GET IT ON b- Google Play UniFi Network Get Answers help.ui.com UniFi Network UI Support

Date: 12/1/2021 TIMCO Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 RE: Request for Confidentiality Software Security Theory of Operation In reference to the application under FCC ID: SWX-U6MESHR, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commissions Rules, Ubiquiti Networks hereby requests permanent confidential treatment of the accompanying information as outlined below:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Mark Feil Ubiquiti lnc. Compliance Manager 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com

Date: 1 December 2021 Federal Communications Commission 7435 Oakland Mills Rd. Columbia, MD 21046 RE: Request for Class II Permissive Change FCC: SWX-U6MESHR It is hereby requested that Ubiquiti Inc. obtain FCC Class II Permissive Change certification of a radio apparatus on the Ubiquiti Inc. product U6-Mesh. The associated FCC: number is listed above. The Class II Permissive Change certification is to add U-NII-2a and U-NII-2c frequencies bands. The U6-Mesh is a four-stream WiFi 6 access point that provides up to 2.7 Gpbs aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios. The U6-Mesh has a Bluetooth management radio, an Ethernet port for data transfer, and is powered from a PoE Adapter. Sincerely, Mark Feil Ubiquiti lnc. Compliance Manager 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com

Power of Attorney Date: 2021/01/20 Dear Sir or Madam, I hereby have entrusted the following entity to be an authorized agent regarding application for Type Certification. Ubiquiti Inc. also authorizes the following entity to be a proxy to handle all certification matters. Unified Compliance Laboratories Address : 427 W 12800 South Draper Utah 84020 e-mail : ucl@ui.com Applicant : Ubiquiti Inc. Address : 685 Third Avenue ,New York NY 10017 United States Of America Name and Job Title. : Mark Feil / Compliance Director E-mail : compliance@ui.com Tel. : 385-200-1617

Date: 6/16/2021 TIMCO Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 RE: Request for Confidentiality Block Diagram Schematics Theory of Operation Software Security Description External Photos Internal Photos Test Setup Photos User Manual Sincerely, Mark Feil Ubiquiti lnc. Compliance Manager In reference to the application under FCC ID: SWX-U6MESHR, and pursuant to Sections 0.457(d)1(ii) and 0.459 of the Commissions Rules, Ubiquiti Networks hereby requests permanent confidential treatment of the accompanying information as outlined below:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to Ubiquiti Networks and provide unjustified benefits to its competitors. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the important rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short term confidentiality on the following attachments until 180 days from grant date. It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Ubiquiti Networks understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. 685 3RD AVE. NEW Y0RK, NY 10071 www.ui.com