FCC ID: SWX-M5G LiteBeam M5-23

by: Ubiquiti Inc. latest update: 2016-08-22 model: M5G

Two grants have been issued under this FCC ID from 12/22/2009 to 08/22/2016 (this is one of sixty-three releases in 2016 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, drivers, warrantee terms, password defaults, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
Get Slack Alerts
|
|   
eg for Slack usage
manuals photo labels
app s submitted / available
1 2 Users Manual pdf 1.14 MiB December 22 2009
1 2 Users Manual pdf 1.14 MiB August 22 2016
1 2 External Photos pdf 258.12 KiB August 22 2016
1 2 ID Label/Location Info pdf 173.15 KiB December 22 2009
1 2 ID Label/Location Info pdf 171.75 KiB August 22 2016
1 2 Cover Letter(s) pdf 33.76 KiB August 22 2016
1 2 Cover Letter(s) pdf 162.35 KiB August 22 2016
1 2 Cover Letter(s) pdf 27.87 KiB August 22 2016
1 2 BOM Parts List/Tune Up Info pdf August 22 2016 confidential
1 2 Block Diagram Block Diagram pdf August 22 2016 confidential
1 2 Internal Photos Internal Photos pdf August 22 2016 confidential
1 2 RF Exposure Info pdf August 22 2016
1 2 Cover Letter(s) pdf 514.10 KiB August 22 2016
1 2 Schematics Schematics pdf August 22 2016 confidential
1 2 Test Report pdf 1.54 MiB August 22 2016
1 2 Test Setup Photos pdf August 22 2016
1 2 Theory of Operation Operational Description pdf August 22 2016 confidential
1 2 Cover Letter(s) pdf 522.79 KiB December 22 2009
1 2 Cover Letter(s) pdf 37.27 KiB December 22 2009
1 2 Test Setup Photos pdf December 22 2009
1 2 RF Exposure Info pdf December 22 2009

 

M5G OEM Users Guide TECH SPECS SYSTEM INFORMATION Processor Specs Memory Information Networking Interface Wireless Approvals RoHS Compliance Atheros MIPS 24KC, 400MHz 32MB SDRAM, 8MB Flash 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION FCC Part 15.247, IC RS210, CE YES OPERATING FREQUENCY 5745MHz-5825MHz 5GHz TX POWER SPECIFICATIONS DataRate 1-24Mbps 36Mbps 48Mbps 54Mbps MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 Avg. TX 20 dBm 19 dBm 18 dBm 16 dBm 20 dBm 20 dBm 20 dBm 20 dBm 19 dBm 17 dBm 16 dBm 15 dBm Tolerance

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB a 1 1 n 1 1 z H G 5 a 1 1 n 1 1 z H G 5 5GHz RX SPECIFICATIONS DataRate 1-24Mbps 36Mbps 48Mbps 54Mbps Sensitivity

-97 dBm min. +/-2dB

-80 dBm

+/-2dB

+/-2dB

-77 dBm

-75 dBm

+/-2dB Tolerance MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7

-96 dBm

-95 dBm

-92 dBm

-90 dBm

-86 dBm

-83 dBm

-77 dBm

-74 dBm

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB Enclosure Size Weight Enclosure Characteristics Mounting Kit Max Power Consumption Power Supply Power Method Operating Temperature Operating Humidity Shock and Vibration PHYSICAL / ELECTRICAL / ENVIRONMENTAL 16cm length x 8cm width x 3cm height 0.5 kg Outdoor UV Stabalized Plastic Pole Mounting Kit included 3.5 Watts 5V USP+POE Adapter Included Passive Power over Ethernet (pairs 4,5+; 7,8 return)

-30C to 75C 5 to 95% Condensing ETSI300-019-1.4 COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation distance of at least following distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. 68.6cm distance for the Dish Antenna 136.9cm distance for the Grid Antenna INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. The device has been designed to operate with the antennas listed below and having a maximum gain of 28dBi. Antennas not included in this list or having a gain greater than 28dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms This device must be professionally installed and is designed strictly for for outdoor point-

to-point wireless links.

 

1 2 Users Manual pdf 1.14 MiB December 22 2009

 

M5G OEM Users Guide TECH SPECS SYSTEM INFORMATION Processor Specs Memory Information Networking Interface Wireless Approvals RoHS Compliance Atheros MIPS 24KC, 400MHz 32MB SDRAM, 8MB Flash 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION FCC Part 15.247, IC RS210, CE YES OPERATING FREQUENCY 5745MHz-5825MHz 5GHz TX POWER SPECIFICATIONS DataRate 1-24Mbps 36Mbps 48Mbps 54Mbps MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 Avg. TX 20 dBm 19 dBm 18 dBm 16 dBm 20 dBm 20 dBm 20 dBm 20 dBm 19 dBm 17 dBm 16 dBm 15 dBm Tolerance

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB a 1 1 n 1 1 z H G 5 a 1 1 n 1 1 z H G 5 5GHz RX SPECIFICATIONS DataRate 1-24Mbps 36Mbps 48Mbps 54Mbps Sensitivity

-97 dBm min. +/-2dB

-80 dBm

+/-2dB

+/-2dB

-77 dBm

-75 dBm

+/-2dB Tolerance MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7

-96 dBm

-95 dBm

-92 dBm

-90 dBm

-86 dBm

-83 dBm

-77 dBm

-74 dBm

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB

+/-2dB Enclosure Size Weight Enclosure Characteristics Mounting Kit Max Power Consumption Power Supply Power Method Operating Temperature Operating Humidity Shock and Vibration PHYSICAL / ELECTRICAL / ENVIRONMENTAL 16cm length x 8cm width x 3cm height 0.5 kg Outdoor UV Stabalized Plastic Pole Mounting Kit included 3.5 Watts 5V USP+POE Adapter Included Passive Power over Ethernet (pairs 4,5+; 7,8 return)

-30C to 75C 5 to 95% Condensing ETSI300-019-1.4 COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation distance of at least following distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. 68.6cm distance for the Dish Antenna 136.9cm distance for the Grid Antenna INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. The device has been designed to operate with the antennas listed below and having a maximum gain of 28dBi. Antennas not included in this list or having a gain greater than 28dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms This device must be professionally installed and is designed strictly for for outdoor point-

to-point wireless links.

 

1 2 Users Manual pdf 1.14 MiB August 22 2016

 

 

n/a

 

 

1 2 External Photos pdf 258.12 KiB August 22 2016

 

M5G FCC ID: SWX-M5G Ubiquiti Networks www.ubnt.com IC: 6545A-M5G This device complies with Part15 of FCC rules. Operation is subject to the following two conditions:

1.) This device may not cause harmful interference and, 2.) This device must accept any interference received, including interference that maay cause undesired operation

 

1 2 ID Label/Location Info pdf 173.15 KiB December 22 2009

 

M5G FCC ID: SWX-M5G Ubiquiti Networks www.ubnt.com IC: 6545A-M5G This device complies with Part15 of FCC rules. Operation is subject to the following two conditions:

1.) This device may not cause harmful interference and, 2.) This device must accept any interference received, including interference that maay cause undesired operation

 

1 2 ID Label/Location Info pdf 171.75 KiB August 22 2016

 

f I UBIOUITI"

NETWORKS December 22,2014 Compliance Testing LLC 1724 S. Nevada Way Mesa, AZ852A4 RE: LETTER OF AGENT AUTHORIZATION To Whom lt May Concern:

We, the undersigned, hereby authorize Compliance Testing LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, MichaelTaylor Compliance Manager 2580 Orchard Parkway San Jose, CA 9513'l USA 408-942-3085 x442 [email protected]

 

1 2 Cover Letter(s) pdf 33.76 KiB August 22 2016

 

M5G 5 GHz Antenna List 1. 28dBi Grid Antenna 2. 22dBi Dish Antenna 1. Ubiquiti AG-5G-28 Gain: 28dBi Dimensions:

15.7 x 23.6 inches

(400 x 600 mm) Azimuth Elevation 2. Ubiquiti D-5G-22 Gain: 22dBi Dimensions:

12 inches diameter

 

1 2 Cover Letter(s) pdf 162.35 KiB August 22 2016

 

Antenna expiration dates FCC ID:

SWX-M5G

(LiteBeam M5

- 23) Application Antenna Model Point to Point Integrated Antenna Gain

(dBi) 23 Expiration Date 06/01/2018

 

1 2 Cover Letter(s) pdf 27.87 KiB August 22 2016

 

12/13/09 Ubiquiti Networks, Inc. 91 E. Tasman San Jose, CA 95134 Attn:

MET laboratories 914 West Patapsco Ave. Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR M5G (FCC ID: SWX-M5G, IC: 6545A-M5G) To Whom It May Concern:

This letter serves as an official request for confidentiality under FCC Rule Section 0.457 & 0.459. We have requested that the schematics, block diagrams, theory of operation, and internal photos required to be submitted with this application be withheld from public review. These documents contain proprietary information that would sacrifice our competitive advantage in the marketplace if made public. Additionally, the mechanical enclosure locking is proprietary and not possible to open by general public Please contact me if there is any information you may need. Sincerely, Robert J. Pera Senior RF Engineer

 

1 2 Cover Letter(s) pdf 514.10 KiB August 22 2016

 

 

n/a

 

 

1 2 Test Report pdf 1.54 MiB August 22 2016

 

12/13/09 Ubiquiti Networks, Inc. 91 E. Tasman San Jose, CA 95134 Attn:

MET laboratories 914 West Patapsco Ave. Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR M5G (FCC ID: SWX-M5G, IC: 6545A-M5G) To Whom It May Concern:

This letter serves as an official request for confidentiality under FCC Rule Section 0.457 & 0.459. We have requested that the schematics, block diagrams, theory of operation, and internal photos required to be submitted with this application be withheld from public review. These documents contain proprietary information that would sacrifice our competitive advantage in the marketplace if made public. Additionally, the mechanical enclosure locking is proprietary and not possible to open by general public Please contact me if there is any information you may need. Sincerely, Robert J. Pera Senior RF Engineer

 

1 2 Cover Letter(s) pdf 522.79 KiB December 22 2009

 

Jennifer Sanchez Jennifer Sanchez Monday, December 21, 2009 7:54 PM

'Dusmantha Tennakoon'

Jenn Warnell; Shawn McMillen; Jennifer Sanchez RE: Technical Review Request: 81790B Ubiquiti Networks - FCC/IC TCB (M5G Model) From:

Sent:

To:

Cc:

Subject:

Importance: High Attachments: 81790 Ubiquiti Networks - IC Package_M5G_Rev1.doc; EMCS81790B-FCC247_Rev1.pdf; M5G user guide_Rev1.pdf HI Dusmantha, Please see response below and revised report, IC package and manual attached. FCC:

1. The user manual should include a statement that installation should only be for point-to-point. Please see revised manual 2. There appears to be a typo in the radiated emissions section of the test report. The raw amplitude is stated as being measured at 3m but there is also a distance correction factor. Please correct this typo. Measurements were taken at 1m meter. The typo has been corrected, please see revised report. IC:

1. The SA settings for the 6dB and 99% Occupied bandwidth are incorrect. The 6 dB bandwidth needs to be measured with a RBW that is close to 1% of the emissions bandwidth. The 99%

bandwidth needs to be measured with a RBW that is close to 1% of the selected span without being below 1%. Corrected, please see revised report. 2. Please clarify how the receiver spurs measurements were performed (i.e. conducted or radiated)? It appears to have been performed radiated. Were the antenna correction factors and cable loss taken into consideration? The limits stated in the standard are in terms of field strength at 3m. However, the SA units are in terms of dBm. Please clarify how the determination was made that the emissions seen pass the field strength limits. There is also what appears to be a limit line on the plots. Please clarify what this line is. Corrected, please see revised report. 3. The RF evaluation in Annex A of the Technical Brief Cover Sheet should state General Public Use. The standard used for evaluation is also incorrect. The RF value should also state 1 mW/cm2. Corrected, please see revised annex A. 4. Reference source not found error on page 15 of 84 of the test report. Corrected, please see revised report. 5. Page 15 of 84 also states that the emissions met class B. However, the tabulated data seems to show class A limits. Please update the test report. Corrected, please see revised report. 12/21/2009

 

1 2 Cover Letter(s) pdf 37.27 KiB December 22 2009
frequency equipment class purpose
1 2016-08-22 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Original Equipment
2 2009-12-22 5745 ~ 5825 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 Effective 2016-08-22
1 2 2009-12-22
1 2 Applicant's complete, legal business name Ubiquiti Inc.
1 2 FCC Registration Number (FRN) 0012268215
1 2 Physical Address 685 Third Avenue
1 2 685 Third Avenue, 27th Floor
1 2 New York
1 2 United States
app s TCB Information
1 2 TCB Application Email Address a******@compliancetesting.com
1 2 t******@metlabs.com
1 2 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 Grantee Code SWX
1 2 Equipment Product Code M5G
app s Person at the applicant's address to receive grant or for contact
1 2 Name M**** F********
1 2 Title Compliance Manager
1 2 Telephone Number 408-9********
1 2 Fax Number 408-9********
1 2 E-mail c******@ubnt.com
app s Technical Contact
n/a
app s Non Technical Contact
1 2 Firm Name MET Laboratories
1 2 Name J******** S********
1 2 Physical Address 3162 Belick Street
1 2 Santa Clara, 95054
1 2 United States
1 2 Telephone Number 40820********
1 2 Fax Number 41035********
1 2 E-mail t******@metlabs.com
app s Confidentiality (long or short term)
1 2 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 Is this application for software defined/cognitive radio authorization?No
1 2 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 DTS - Digital Transmission System
1 2 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)LiteBeam M5-23
1 2 802.11 n radio
1 2 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 Modular Equipment TypeDoes not apply
1 2 Purpose / Application is forOriginal Equipment
1 2 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 136.9 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The 22dBi dish antenna and 28dBi grid antenna are for point-to-point applications only
1 2 Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 136.9 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The 22dBi dish antenna and 28dBi grid antenna are for point-to-point applications only.
1 2 Is there an equipment authorization waiver associated with this application?No
1 2 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 Firm Name Eurofins MET Laboratories, Inc.
1 2 Name J****** F****
1 2 Telephone Number 41094********
1 2 Fax Number 44392********
1 2 E-mail j******@metlabs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 48 5745.00000000 5825.00000000 0.3730000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C 5745.00000000 5825.00000000 0.3730000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC