FCC ID: SWX-UAG2M UniFi Access Reader G2 Mini

Datasheet UA-G2-Mini Access Reader G2 Mini UA-G2-Mini Mechanical Dimensions Weight Enclosure material Mounting Weatherproong Hardware 93 x 40 x 36.5mm (3.7x 1.6x 1.4") 210 g (7.4 oz) Polycarbonate, glass In wall, gang box IP-55 Networking interface

(1) 10/100 MbE RJ45 port Connectivity Power method Supported voltage range Max. power consumption BLE 4.1 PoE 48V 5W ESD/EMP protection Air: 15KV, contact: 8KV Sensors Speaker LEDs Button NFC frequency NFC read range NFC standards NFC technology Proximity sensor Radar sensor

(1) IP67, 8 ohm, 0.7W R/G/B/W Flash

(1) Factory-reset 13.56 Mhz

< 30 mm ISO 14443A, 14443B, 15693 NFC Tag 1,2,3,4,5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire Operating temperature

-30 to 45 C (-22to 113 F) Operating humidity Certications 5 to 95% noncondensing FCC, IC Specifications are subjec t to c hange. Ubiquiti products are s old with a limited warranty desc ribed at: www.ui.com/s upport/warranty 2022 Ubiquiti Inc. All rights reserv ed. Ubiquiti, Ubiquiti Network s, the Ubiquiti U logo, UniFi, and UniFi Acc ess are trademark s or regis tered trademark s of Ubiquiti Inc . in the United States and in other countries. All other trademark s are the property of their res pec tive owners. FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help."

ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-3(A)/NMB-3(A) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio ex-

empts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20(FCC/IC) cm from all persons and must not be located or operating in con junction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une dis tance de sparation de toute personnes daumoins 20 (FCC/IC) cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur.`

Ubiquiti Inc. DATE : 2023/01/17 FCC ID: SWX-UAG2M Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Company name: Cerpass Technology Corporation Address: No.10, Lane 2, Lianfu Street, Luzhu Dist., Taoyuan City, 33848, Taiwan(R.O.C.) Name: Nina Hsu For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by TIMCO Engineering Inc., still resides with us. Signature FCC grantee contact person information. Name/Title: Alex Macon / Compliance Manager Company Name: Ubiquiti Inc. Address: 685 Third Avenue, New York, NY, United States, 10017 TEL: 408-942-3084 FAX: 408-904-5255 Email: compliance@ui.com

FCC, Request for non-disclosure RF_501, Issue 7 Date: 19-Oct-10 Page 1 of 1 Company Name: Ubiquiti Inc. Address:

City:

Country:

685 Third Avenue 10017 New York USA To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: SWX-UAG2M Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: For marketing purpose Planned Release Date STC: 180 days from the date of grant. (notes 2, 3, 4, 5). If no date is given, 45 days from grant date will be used. Date: December 22, 2022 Name and signature of applicant: Alex Macon Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160, Issue 04 Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Ubiquiti Inc. 685 Third Avenue 10017, New York USA Name Representative of agent:

Agent Company name:

Address:

City:

Country Nina Hsu (1) Cerpass Technology Corporation No.10, Lane 2, Lianfu Street, Luzhu District Taoyuan City Taiwan R.O.C. is authorized to apply for Certification of the following product(s):

Product description: UniFi Access Reader G2 Mini Type designation: UA-G2-Mini Trademark:

Validity/ expiry date UBIQUITI on our behalf. Date:

City:

Name:

December 22, 2022 New York Alex Macon (2) Function:

Compliance Manager Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

Grant deferral request letter Date: 2023/1/17 Grant deferral request regarding application for certification of FCC ID: SWX-UAG2M To whom it may concern:

We, Ubiquiti Inc., would like to request the approval of our FCC grant for the application with FCC ID: SWX-UAG2M be deferred until 25th January 2023. Yours sincerely, FCC grantee contact person information. Name/Title: Alex Macon / Compliance Manager Company Name: Ubiquiti Inc. Address: 685 Third Avenue, New York, NY, United States, 10017 TEL: 408-942-3084 FAX: 408-904-5255 Email: compliance@ui.com