FCC ID: SWX-UCCAST UniFi Connect Cast

Datasheet UC-Cast Connect Cast PoE-powered content broadcasting module that presents custom UniFi Connect playlists on HDMI-compatible displays. The Connect Cast (UC Cast) is a portable, PoE-powered content broadcasting module that allows you to present custom multimedia playlists created in the UniFi Connect application on any HDMI-compatible display. The UC Cast can also be powered with the included USB-C adapter and is fully managed with UniFi Connect. Mechanical Dimensions Weight Hardware Processor Memory Power input Connectivity Operating humidity Certications Software Application Without mount: 92 x 52 x 31mm (3.62x 2.05 x 1.22") With mount: 92.1x 56.3 x 35.7mm(3.63x 2.06 x 1.41") Without mount: 163 g (5.75 oz) With mount: 183 g (6.46 oz) Quad-core Arm Cortex-A55,1.9 GHz Storage: 8GB RAM: 2GB PoE 802.3af, 48VDC, 0.35A USB-C 5VDC, 1A

(1) GbE RJ45 port

(2) USB-C port 802.11a/b/g/n/ac WiFi 2.4G b/g/n, BW 20 MHz WiFi 5G a/n/ac, BW 20/40/80 MHz 20 to 90% noncondensing FCC, IC UniFi Connect WiFi standards 802.11 a/b/g/n/ac Operating temperature 0 to 40 C (32 to 104 F) Minimum software requirements Web browser (Chrome recommended) Mobile apps UniFi Connect iOS and Android Ubiquiti products are sold with a limited warranty desc ribed at: ui.c om/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or c lass actions . 2022 Ubiquiti Inc. All rights res erved. Ubiquiti, Ubiquiti Network s, the Ubiquiti U logo, UniFi, and UniFi Connect are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademark s are the property of their respective owners. FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

"This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications.However, there is no guar-

antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help."

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. SED Canada CAN ICES-3(B)/NMB-3(B) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is sub-

ject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio ex empts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suscepti ble den compromettre le fonctionnement. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur.

RF_160, Issue 04 Nina Hsu (1) Cerpass Technology Corporation No.10, Lane 2, Lianfu Street, Luzhu Dist., Taoyuan City 33848 Taiwan Ubiquiti Inc. 685 Third Avenue, New York New York 10017 USA Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Name Representative of agent:

Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

Product description: UniFi Connect Cast Type designation: UC-Cast UBIQUITI Trademark:

Validity/ expiry date on our behalf. Date:

City:

Name:

Function:

Compliance Manager January 17, 2022 Mark Feil (2) New York Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

FCC, Request for non-disclosure RF_501, Issue 7 Date: 19-Oct-10 Page 1 of 1 Company Name: Ubiquiti Inc. Address:

City:

Country:

685 Third Avenue New York 10017 USA Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: SWX-UCCAST Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification: For marketing purpose Planned Release Date STC: 180 days for the date of grant (notes 2, 3, 4, 5). If no date is given, 45 days from grant date will be used. Name and signature of applicant: Mark Feil Date: January 17, 2022 Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period