FCC ID: SWX-UVCG4INS UniFi Protect G4 Instant

Datasheet UVC-G4-INS G4 Instant Camera WiFi-connected, plug-and-play camera with 2K HD image resolution, a wide-angle lens, and two-way audio. The compact G4 Instant Camera delivers sharp, 2K HD video over dual-band WiFi, and comes equipped with a built-in speaker and microphone to enrich your live feeds and footage with two-way audio. The G4 Instant also features integrated IR LEDs to boost your nighttime image clarity, and its IPX5-rated, weatherproof casing enhances its outdoor durability and tamper resistance, making it an ideal camera to stage in highly populated, public areas. Designed for convenience and ease of use, the camera is powered with its included AC power adapter and can be adopted in minutes via WiFi or Bluetooth with the UniFi Protect web application or mobile app. Mechanical Dimensions Weight Enclosure material Mount material Weatherproong Resistance Optics Sensor Lens View angle Night mode Video Compression Resolution Image settings System Processor specs Memory information Management interface Networking interface Flash memory support Max. power consumption Power supply 81.6 x 50 x 47.2 mm (3.21 x 1.97 x 1.86") Without mount: 125 g (4.41 oz) With mount: 163 g (5.75 oz) Polycarbonate Polycarbonate IPX5 IK04 5 MP CMOS Sensor Fixed focal length EFL 2.8 mm, f/1.6 H: 102.4, V: 71.4, D: 134.3 Built-in IR LED illumination and IR cut lter Dual-Core ARM Cortex-A7 2 GbDDR3 UniFi Protect 802.11 a/b/g/n/acWi-Fi Bluetooth 5.0 2 Gb 6W Maximum frame rate 30 FPS H.264/MJPEG 2688 x 1520 (16:9) Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay Supported voltage range DC 5V, 2A 5V, 2A USB power adapter (included) Instant 802.3af PoE to USBadaptor (optional) 2 of 3 Operating temperature

-20to 40 C (-4 to 104 F) Link/activity LED Button Mounting Operating Humidity Certications Audio Microphone Speaker Software Controller software Mobile apps R/G/B/W Factory reset Wall mount accessory(included) 0 to 90% Noncondensing FCC, IC, CE Yes (can be disabled in software) Yes UniFi Protect UniFi Protect iOS and Android Specifications are s ubjec t to c hange. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty 2021 Ubiquiti Inc. All rights reserv ed. Ubiquiti, Ubiquiti Network s, the Ubiquiti U logo, UniFi, and UniFi Protect are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. Android is a trademark of Google LLC. All other trademark s are the property of their respective owners. FCC Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

"This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help."

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. SED Canada CAN ICES-3(B)/NMB-3(B) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio ex empts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est suscepti ble den compromettre le fonctionnement. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilises pour ce transmetteur doivent tre install en considrant une distance de sparation de toute personnes dau moins 20 cm et ne doivent pas tre localis ou utilis en conflit avec tout autre antenne ou transmetteur.

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: SWX-UVCG4INS. Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

long-term confidentiality Exhibit Type Block Diagram Operational Description Schematic Diagrams File Name Block Diagram.pdf Operational Description.pdf Schematics.pdf Justification for internal photos: The EUT use special screw, the Circuit board(s) or internal components are inaccessible to the user The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

short-term confidentiality Exhibit Type External Photos Users Manual Test Set-up Photos Internal Photos File Name External Photos.pdf User Manual.pdf Test Setup Photos.pdf Internal Photos.pdf Planned release date STC: 180days after grant issued. Sincerely, Mark Feil/ Compliance Manager Ubiquiti Inc. Rev 11/20/07

685 Third Avenue, New York, New York 10017, USA Ubiquiti Inc. DATE : 2021-09-13 FCC ID: SWX-UVCG4INS Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Company name: Cerpass Technology Corporation Address: No.10, Lane 2, Lianfu Street, Luzhu Dist., Taoyuan City, 33848, Taiwan(R.O.C.) Name: Leslie Chiu For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with us. Signature FCC grantee contact person information. Name/Title: Mark Feil / Compliance Manager Company Name: Ubiquiti Inc. Address: 685 Third Avenue, New York, New York 10017, USA TEL: 408-942-3084 FAX: 408-904-5255 Email: compliance@ui.com