FCC ID: RIIBTS30V01 Mini Speakerphone

Contents INSTALLATIONS SPECIFICATIONS DISCLAIMER WARRANTY / LIABILITIES PACKAGE CONTENT BATTERY OPERATIONS SPEAKERPHONE OPERATIONS BUTTON FUNCTIONS AND OPERATION CARE AND MAINTENANCE TROUBLE SHOOTING CUSTOMER SERVICE / CONTACT US FCC / ICC 2 Specications

- Bluetooth Spec.: v2.1

- Weight: 45g

- Talk Time: 5 Hours

- Standby Time: 150 Hours

- Proles Support: Headset, Handsfree

- Operating Range: 10 Meters

- Operation Voltage: 3.3V

- Battery: Li-polymer, 300mAh

- Noise / Echo Reduction: CVC Noise & Echo Reduction

- Volume Control Level: 15 Levels

- Operating Temperature: -5C to 40C

- Storage Temperature: -10C to 70C Disclaimer Distracted driving is dangerous. Always use the Bluetooth Device in a manner that does not reduce your attention and ability to drive carefully and safely. Adhere to all applicable trafc laws and motor vehicle regulations applicable to the device. Consult local laws and regulations for any restrictions on installation or use. Do not install on or near an airbag. Such installation could interfere with airbag deployment or could cause the product or another object to become a projectile, which could result in serious personal injury to occupants. Ensure the product location will not obstruct your vision while driving. Observe all signs that require an electrical device or RF radio product to be switched off in the designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres. Turn off your device prior to boarding an aircraft. Do not use your device in an aircraft. Never allow children to play with the device. Small parts may be a choking hazard. 3 Installations Battery Operations IMPORTANT: Before installing the BTS30, make sure:

Vehicle is parked in a safe area Car engine is OFF Emergency brake is set IMPORTANT: Before using the BTS30 Hands-Free Speakerphone:

Charge the battery before using for the rst time Only use rechargeable batteries provided Your BTS30 may be installed in your vehicles sun visor. Sun Visor Mounting Follow the steps below to install the B T S 3 0 to your cars sunshade panel:

Attach and secure the visor mount on the back side of the BTS30 Slide and mount the BTS30 to the vehicles sun visor 1 2 A. Low Battery Indication Recharge battery when:

Red indicator light turns red BTS30 emits a beeping sound B. Charging the Battery Follow the steps below when charging the BTS30 Hands-Free Speakerphone:

Insert the charging cable to the USB charging port of the BTS30 Plug the cable to a power port When the device is in charging mode, the red battery indicator light is On indicating that charging is in progress NOTE:

Standard charge time is around 3 hours Battery indicator light will turn Off once fully charged IMPORTANT: Do not leave unit charging unattended if you must leave key in the ignition to charge, unless your vehicle is equipped with a port that is powered with key out of ignition. NOTE: To charge the unit at home, use a 12V DC to AC convert or use a USB power outlet with a USB to Mini USB cable 7 CAUTION:Riskofexplosionifbatteryisreplacedbyan incorrecttype.Disposeofusedbatteriesaccordingtothe instructions. NOTE:ActualtalktimeandstandbytimefortheBTS30 willvarywithdifferentBluetoothenabledmobilephones duetodifferentimplementationofpowerdownmodes. Speakerphone Operations microphone volumedown send/end volumeup ON/OFF speaker USBoutlet A.PowerON/OFF ToturntheBTS30ON:

PressandholdtheON/OFFbuttonfor2seconds TheblueLEDindicatorwilllightup,indicatingthe standbymodewasinitiated ToturntheBTS30OFF:

PressandholdtheON/OFFbuttonfor4seconds(in anymode) TheBTS30willshutdown Alongbeepsoundisheard B.Pairing/Linking PairingBluetoothenableddeviceslikemobilephones withtheBTS30Hands-F reeSpeakerphoneauthorizes thedevicestoworkwitheach.Thissteponlyneedstobe performedonce. BeforePairingtheBTS30Hands-F reeSpeakerphone:

EnsuretheBTS30isfullycha rged EnsurethattheBTS30isunpluggedf romthecharger EnsuretheBTS30isintheOFFmode EnsuretheBluetoothonyourmobilephoneis activated FollowthestepsbelowtopairyourBTS30withyour mobile phone for the rst time:

PressandholdON/OFFkeyfor4secondsuntilthe LEDindicatoralternatelyblinksredandblue.Donot let go until you see both colors ashing NOTE:BTS30isnowinpairingmode 8 Activate the Bluetooth settings of your mobile phone NOTE: The following steps are general procedure; to access Bluetooth Menu for your mobile phone, please refer to your phone user manual. Select SET-UP or CONNECT from your mobile phone menu Find and select OPTION to discover Bluetooth devices; establishing a connection may take several minutes If found, phone display should indicate BTS30 device was detected or Select BTS30 from the list Phone should give you a prompt asking if you want to pair the device Select OK or ACCEPT and wait for prompt to enter passkey or PIN Enter the code 0000 Select OK to pair and connect the BTS30 and the handset NOTE: The BTS30 can pair with more than one phone, however it can only connect to one phone at a time. If you wish to pair to a second phone, disable or turn OFF Bluetooth on the phone already paired. NOTE: Under the pairing mode, if the BTS30 and mobile handset did not successfully pair, follow the steps below to retry pairing:

Turn BTS30 OFF Turn OFF all other Bluetooth devices before starting the pairing process Repeat the pairing instructions from the beginning 9 C. Call Operations Making / Receiving Calls User can make a call either from the mobile phone or YD-

V44. Before you make or receive calls, ensure:

Bluetooth connection is established between your BTS30 and mobile phone Battery is fully charged 1. Answering Calls NOTE: Calls may be answered via the mobile handset in the normal way. To answer calls via the BTS30:

Check if power is ON and device is linked The BTS30 will ring or emit a beep sound when there is an incoming call Press the SEND/END button when ring tone is heard NOTE: Some ip phones may require you to change phone answer setting to any key answer. 2. Rejecting Calls The BTS30 will ring or emit a beep sound when there is an incoming call Press and hold the SEND/END button for 2 seconds to reject a call 3. Terminating a Call NOTE: Calls may be ended through the mobile phone To end calls via the BTS30:

Press the SEND/END button 4. LastNumberRe-dial Tocalllastnumberdialedorcalledregister:

PresstheSEND/ENDbuttontwice 5. VoiceDialing PressandholdSEND/ENDbuttonfor2seconds TheBTS30willemitabeepsound Toentervoicedialingmode:

NOTE:Somephoneswillrequireyoudownloadthe phonebooktotheunitforthevoicedialingfunction. 6. MakingaCall NOTE:TheBTS30doesnthaveanumerickeyboard tosupportdialing.UseyourBluetoothmobilephone tomakeoutgoingcalls. EnsuretheBTS30ispairedwithyourBluetooth mobilephonebeforedialing Dialthenumberusingyourmobilephonekeypad Pressthecallbuttonofyourmobilephonetomake acall 7. InterchangingBTS30andHandset Youmayinterchangethecallbetweenyourhandset andBTS30whileonacall PressandholdSEND/ENDbuttonfor2seconds ThecallwillbetransferredtoyourBTS30unitfrom yourmobilephoneorviceversa 8. AdjustingtheVolume Toadjustthevolumeduringacall:

PressVolumeUpkeytoincreasespeakervolume PressVolumeDownkeytodecreasespeaker volume NOTE:Theabove-mentionedfunctionsareonly applicabletothemobilephoneswhichsupportthe BluetoothHands-Freefunction.Pleaserefertoyour Bluetoothmobilephoneusermanualforappropriate applications. 9. Mute/Un-MuteFunctions:

ToMute/Un-mutetheBTS30duringanactivecall:

PresstheON/OFFbutton TheBTS30willemitabeep FCC Statement 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 10 Button Functions And Operation Care And Maintenance Receive Call Once ring tone is heard, press 1 time Do not stick anything inside the BTS30 as this may damage BUTTON FUNCTION OPERATION ON/OFF SEND/

END Power ON Power OFF Pairing Mute/Un-Mute Searching for Paired Device Press and hold for 2 seconds Press and hold for 4 seconds Under OFF mode, press and hold for 4 seconds Press 1 time Press 1 time End Call Reject Press 1 time Press & hold for 2 seconds Last Call Redial Press 2 times Voice Dial Press and hold for 2 seconds Call Transfer Press and hold for 2 seconds Call Waiting Press 1 time to terminate the conversation and answer the new call Volume Up Volume Down Increase Volume Press repeatedly until you reach desired volume Decrease Volume Press repeatedly until you reach desired volume 11 Turn off the BTS30 when not in use Do not let the BTS30 be in contact with liquid as it is not waterproof. Avoid putting it in places where there is excessive moisture and humidity. Do not expose the BTS30 to direct sunlight nor place in areas with high temperature, as it may result in an explosion If the BTS30 is not in use for a prolonged period, store in a cool, dry place, free from moisture, humidity and dust Do not use abrasive cleaning solvents to clean the BTS30 Do not expose the BTS30 to contact with sharp objects as this will cause scratching and damage internal components Do not attempt to disassemble the BTS30, as it does not contain serviceable components Only charge the BTS30s built-in battery in accordance with the instructions of this user guide Do not disassemble the device as it may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the BTS30 is subsequently used Avoid charging the BTS30 in extremely high or low temperatures Its recommended to charge the BTS30 immediately whenever low battery Poweris encountered to prolong durability & standby time of battery