FCC ID: MG3-TX920U Voice Remote Control

Sony Voice Remote Control RMF-TX920U, RMF-TX920P, RMF-TX920D, RMF-TX920T, RMF-TX920M, RMF-TX920V Quick Reference Guide CONTROLLING YOUR TV (English) 1. Press Power key to turn on the TV. with TV. Control del televisor (Spanish) 2. Press and hold [VOL(-)] key and [Google Assistant

] key for 2 seconds initiate pairing 3. All paring transaction is behind the scene and no setup is required. 1. Pulse la tecla de encendido para encender el televisor . 2. Mantenga presionado [VOL(-)] y la tecla [Google Assistant el emparejamiento con TV. 3. Todas las transacciones de pelado est detrs de la escena y no se requiere ninguna configuracin.

] durante 2 segundos iniciar Controlando a sua TV (Portuguese) 1. Pressione a tecla de alimentao para ligar a TV. 2. Pressione e segure [VOL (-) ] e chave [Google Assistant emparelhamento com TV. 3. Todas as transaes apara est por trs da cena e nenhuma configurao necessria.

] durante 2 segundos iniciar o Caution Please read these safety instructions to ensure our personal safety and prevent property damage Warning

- Do not put remote in a fire

- Do not disassemble the remote control

- Disposal of the remote control A warning that batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Important Safety Instruction 1. Read these instruction 2. Keep these instruction 3. Head all warning 4. Follow all instructions 5. Do not use this apparatus near water 6. Clean only with dry cloth 7. Do not install near any heat source such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 8. Only use attachment/accessories specified by manufacture 9. Refer all servicing to qualified service personnel. Service is required when apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped. Specification Operating Temperature: -10 degree - 45 degree Battery Type: Lithum Battery COMPLIANCE WITH FCC RULES AND REGULATIONS 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase or decrease the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced remote control/ TV technician for help. This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. FCC RF Radiation Exposure Statement:

To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Authorization Label This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2 This device must accept any interference received, including interference that may cause undesired operation. Warning Statement:

Europe-EU Declaration of Conformity and Restrictions Hereby, SONY declares that this Voice Remote Control is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This equipment is marked with the symbol and can be used throughout the European community. This indicates compliance with the RE Directive 2014/53/EU and meets the relevant parts of following technical specifications:

EN300328 v2.2.2: 2019 EN301489-1 v2.2.3: 2019 / -17 v3.2.4:2020 EN62368-1:2020+A11:2000 EN62479: 2010 / EN50663: 2017 EN55032: 2015+A11: 2020 / EN55035: 2017+ A11:2020 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE Product Specification Software: X1 Frequency: 2402 to 2480 MHz Maximum power: 7dBm Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numrique de classe B est conforme la norme NMB-003. RF exposure:

To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Pour se conformer aux exigences de conformit RF canadienne l'exposition, cet appareil et son antenne ne doivent pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. NCC :

LP0002 _ 3.8.2 NCC ID Logo La operacin de este equipo est sujeta a las siguientes dos condiciones 1. 2. Es posible que este equipo o dispositivo no cause interferencia perjudicial Este equipo o dispositivo debe aceptar cualquier interferencia. Incluyendo la que pueda causar su operacin no deseada. Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo n. 242/2000 e atende aos requisitos tcnicos aplicados. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Para maiores informaes, consulte o site da ANATEL www.anatel.gov.br

FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:October6,2023 Ref:AttestationStatementsPart2.911(d)(5)(i)&(ii)Filing FCCID:MG3TX920U Statement for 47 CFR section 2.911(d)(5)(i)

[UniversalElectronicsInc.](theapplicant)certifiesthattheequipmentforwhichauthorizationis soughtisnotcoveredequipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. Statement for 47 CFR section 2.911(d)(5)(ii)

[UniversalElectronicsInc.](theapplicant)certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredListasaspecificallynamedentityoranyofitssubsidiaries oraffiliatesthatproducingcoveredequipment. Sincerely, Signature:

PrintedName/Title:JesseMendez/StaffEngineerElectrical CompanyName:UniversalElectronicsInc.

Date:October6,2023 FederalCommunicationCommission EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MID21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: MG3-TX920U PursuanttoSections0.457(d)and0.459oftheCommissionsRulesandFCCGuidancedocument726920,wehereby requestpermanentconfidentialtreatmentofexhibitsidentifiedassuchinthetablebelowandrequesttheyare permanently withheld from public review based on the documents containing trade secrets and proprietary informationnotcustomarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbeharmfultothe competitors. applicant unjustified benefits provide and its to We also request shortterm confidentiality on certain exhibits until the intended date of marketing as outlined below.Werequesttheexhibitsbewithheldfrompublicviewforaperiodof180days.Weattestmarketingofthe productwillonlycommenceaftertheperiodofshorttermconfidentialityexpires,orifmarketingistocommence before the requested number of days listed above, the grantee will inform the TCB to release the ShortTerm ConfidentialityinformationwithheldontheFCCequipmentauthorizationwebsite. Exhibit Block Diagrams Operation Description Software defined radio & security info Parts List & Placement/BOM Tune-Up Procedure Schematic Diagrams External Photos Internal Photos Test Setup Photos Users Manual Type of Confidentiality Requested Permanent Permanent Permanent Permanent Permanent Permanent

Permanent*

Permanent*

Short Term Short Term

Short Term Short Term Short Term Short Term Short Term Short Term Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note:anydocumentsheldundertheShortTermconfidentialitywillautomaticallybecomepublicafterthe requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams)thatmayhavealreadybeenrequestedtohavePermanentconfidentialityasshownaboveneed notberepeatedunderShortTermconfidentialityrequest. Sincerely, Signed:

Printed name: Jesse Mendez Title: Staff Engineer Electrical Company Name: Universal Electronics Inc.

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: MG3-TX920U To whom it may concern:

Date: October 6, 2021 We, the undersigned, hereby authorize Jim Chang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge

(47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This authorization is valid until further written notice from the applicant. Sincerely, Signature:

Printed Name /Title: Jesse Mendez / Staff Engineer Electrical Company Name: Universal Electronics Inc.

FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoadColumbia, MD21046USA Ref:AttestationStatementsPart2.911(d)(7)Filing Date:October17,2023

[UniversalElectronicsInc.](theapplicant)certifiesthat,asofthedateofthefilingoftheapplication, wedesignateourselvesastheU.S.agentforserviceofprocess. Sincerely, FRN:0007413982 CompanyName:UniversalElectronicsInc. ContactPerson:JesseMendez Address:201E.SandpointeAve;7thFloorSantaAna,CA92707UnitedStates Tel.:7149184100 Email:jmendez@uei.com ApplicantSignature: