Web: www.digirf.com Sample: www.comemagic.en.alibaba.com V-CHIP VT-S02C-915 RELEASE MAY-2017 VER1.0.3 VT-S02C-915 Ultra-Low Power Long Range RF Module Industry 1 Advantage Ultra-Low Power Voltage Range: 1.8~3.8V Standby: 0.7uA Active-Mode RX: 5.4mA Active-Mode TX: 13.4mA @+10dBm Long Range 2000m @+10dBm, 2.4kbps 3000m @+15dBm, 2.4kbps TI-RTOS and Contiki System Support External Watchdog Small Size, Compatible with VT-SA02x 2 Descriptions The picture is for reference, please in kind prevail VT-S02C-915 RF Module is base on the SoC chip CC1310 of Texas Instruments design. It integrated with a high performance RF core, an ARMCortex-M3 controller. It operates at 904~920MHz, max output power up to 10dBm. Thanks to its ultra low power feature, the module is extremely suitable for the battery power systems. And thanks to its small size, the module can be easily installed in existing systems without any external circuits. 3 Device Information Frequency Part Number VT-S02C- 915 MHz 904-920 Power dBm 10 Range km 3 Voltage Temperature V 1.8~3.8
-40~85 Discreption Copyright @ 2017~2018, V-chip Microsystems,Inc. DATASHEET VT-S02C-915 RELEASE MAY-2017 VER1.0.3 4 Features Radio Operate Frequency 904~920MHz Peripherals 19 GPIO V-CHIP www.digirf.com Modulation: MSKFSKGFSKOOKASK 4 Timers (8x16-Bit or 4x32-Bit) 2-GFSK4GFSKCPM Support PWM Each Sensitivity: -124dBm @Long-Range Mode 12-Bit ADC, 8-Channel Data Rate from 0.625Kbps to 4Mbps UARTSSII2CI2S Hardware support FEC, Data Whitening, CRC Real-Time Clock (RTC) Support 8.2.15.4g Support LBT and CCA Support Digital RSSI Microcontroller AES-128 Security Module Support 8 Capacitive Sensing Buttons Integrated Temperature Sensor Electric Specification Powerful ARM Cortex-M3 Voltage Range from 1.8 to 3.8V Up to 48MHz Clock Speed Standby: 0.7uA 128KB Flash 20KB SRAM Active-Mode RX: 5.4mA Active-Mode TX: 13.4mA @ +15dBm 2-Pin cJTAG and JTAG Debugging Support OTA Package SMD + DIP Antenna Interface: SMD + DIP + IPEX Connector 5 Applications 915MHz ISM and SRD Systems Industrial Monitoring and Control Energy Harvesting Application Home and Building Automation Electronic Shelf Label Heat Cost Allocators Long-Range Sensor Application Wireless Alarm and Security Systems SmartGrid and Automatic Meter Reading Wireless Sensor Networks Wireless Healthcare Application Active RFID DATASHEET Copyright @ 2017~2018, V-chip Microsystems,Inc. 2 V-CHIP www.digirf.com 6 Terminal Configuration and Functions 6.1 Pin Diagram VT-S02C-915 RELEASE MAY-2017 VER1.0.3 VT-S02C (27.0 20.0 mm) Pin out1.27mm Pitch 6.2 Signal Description Pin NO. Name Type Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VCC GND RST TMS TCK Power Power Voltage Range from 2.4V to 3.8V DC Ground Digital Input Reset, active low. No internal pull-up Digital I/O Digital I/O JTAG TMSC, High drive capability JTAG TCKC DIO16/TDO Digital I/O GPIO, JTAG TDO, High drive capability DIO17/TDI Digital I/O GPIO, JTAG TDI, High drive capability DIO25 DIO26 DIO27 DIO28 DIO29 DIO14 DIO13 Digital/ Analog I/O GPIO, Sensor Controller, Analog Digital/ Analog I/O GPIO, Sensor Controller, Analog Digital/ Analog I/O GPIO, Sensor Controller, Analog Digital/ Analog I/O GPIO, Sensor Controller, Analog Digital/ Analog I/O GPIO, Sensor Controller, Analog Digital I/O Digital I/O GPIO GPIO Copyright @ 2017~2018, V-chip Microsystems,Inc. DATASHEET 3 VT-S02C RELEASE MAY-2017 VER1.0.3 15 DIO11 Digital I/O 16 17 18 19 20 21 22 23 24 25 26 27 DIO10 Digital I/O DIO9 DIO8 DIO7 DIO6 DIO5 DIO4 DIO3 DIO2 GND ANT GND Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Power Analog Power 6.3 External Watchdog Connection V-CHIP www.digirf.com GPIO GPIO GPIO GPIO GPIO, Sensor Controller, High drive capability GPIO, Sensor Controller, High drive capability GPIO, Sensor Controller, High drive capability GPIO, Sensor Controller GPIO, Sensor Controller GPIO, Sensor Controller Ground Antenna, 50ohm Ground 6.3.1 Pin Connection Pin Name Function Type Description DIO19 WAKE Input Connect to Watchdog WAKE pin, issue a periodic WAKE pulse. DIO18 DONE Output Connect to Watchdog DONE pin, must issue a DONE signal to at least 20ms before the rising edge of the next WAKE pulse. Note:
Watchdog may not include in some type of the module. The Watchdog is programmed to 1 minute periodic, please contact with us for other periodic. Make sure to deal with WAKE pulse during debugging. DATASHEET Copyright @ 2017~2018, V-chip Microsystems,Inc. 4 V-CHIP www.digirf.com 6.3.2 Watchdog Pulse Diagram VT-S02C-915 RELEASE MAY-2017 VER1.0.3 7 Specifications 7.1 Electric Spec VCC, Operate Voltage Voltage on any digital pin Voltage on ADC input Input RF level 7.2 Environment Spec Operate Temperature Operate Humidity Storage Temperature 7.3 Radio Spec Condition: Ta=25VCC=3.3V. 915MHz Operate Frequency Output Power Sensitivity @Long-Range Mode, 2.4Kbps Data Rate Copyright @ 2017~2018, V-chip Microsystems,Inc. MIN 1.8
-0.3
-0.3
-
MIN
-40 10%
-40 MIN 904
-10
-
625 MAX UNIT 3.8 VCC+0.3 VCC 10 V V V dBm MAX UNIT 85 90%
150 rh MAX UNIT 920
+10
-124 4M MHz dBm dBm bps DATASHEET 5 VT-S02C RELEASE MAY-2017 VER1.0.3 TX Current @ +10dBm RX Current @ MCU Ative V-CHIP www.digirf.com 24 6 mA mA
-
-
8 Tools and Development Source We provide CC13xx Evaluation Boardfully compact with TI CC13xx LaunchPad. CC1310 sheet of TI: http://www.ti.com/product/CC1310 TI wikihttp://processors.wiki.ti.com/index.php?title=Category:Sub-1GHz CC1310 LaunchPad of TI: http://www.ti.com/tool/launchxl-cc1310 DATASHEET Copyright @ 2017~2018, V-chip Microsystems,Inc. 6 V-CHIP www.digirf.com 9 Size Data VT-S02C-915 RELEASE MAY-2017 VER1.0.3 Copyright @ 2017~2018, V-chip Microsystems,Inc. DATASHEET 7 VT-S02C RELEASE MAY-2017 VER1.0.3 V-CHIP www.digirf.com IMPORTANT NOTICE V-chip Microsystems,Inc. (short of V-chip)reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to V-chips terms and conditions of sale supplied at the time of order acknowledgment. V-chip warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with V-chips standard warranty. Testing and other quality control techniques are used to the extent V-chip deems necessary to support this warranty. V-chip does not warrant or represent that any license, either express or implied, is granted under any V-chip patent right, copyright, mask work right, or other V-chip intellectual property right relating to any combination, machine, or process in which V-chip products or services are used. Information published by V-chip regarding third-party products or services does not constitute a license from V-chip to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from V-chip under the patents or other intellectual property of V-chip. Reproduction of V-chip information in V-chip data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. V-chip is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of V-chip products or services with statements different from or beyond the parameters stated by V-chip for that product or service voids all express and any implied warranties for the associated V-chip product or service and is an unfair and deceptive business practice. V-chip is not responsible or liable for any such statements. V-Chip Microsystems, Inc Add6 floor, Longtang Building, Nan Shan Cloud Valley Innovation Industrial Park, No.1183, Liuxian Road, Nanshan District, Shenzhen city Tel86-755-88844812 Fax86-755-22643680 E-mailsales@digirf.com ZIP518055 Webwww.digiRF.com DATASHEET 8 Copyright @ 2017~2018, V-chip Microsystems,Inc. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Modular Approal & Installation:
The Ultra-Low Power Long Range RF Module is designed to comply with the FCC rules, except for power stabilization which shall be provided by the host. Therefore, any host system using this module, requires additional testing and equipment authorization. This radio module must not be installed to co-locate and operating simultaneously with other radios in host system, if so, then additional testing and equipment authorization may be required to operating simultaneously with other radio. Applicable antenna: Helical antenna,FPC antenna;Applicable antenna Gain:-4dBi to +4dBi. The host system shall have a label indicating: Contains FCC ID: 2APCO-S02C915