WIFI BABY MONITOR Whats inside Welcome!................................................................. 2 Getting started ...................................................... 3 Tour of the system ............................................... 9 Everyday use .........................................................13 Motion detection ...........................................14 Sound detection ............................................14 Auto-record time ..........................................15 Battery life........................................................15 Temperature alarm .......................................16 Music ...................................................................16 Share camera with friend .......................... 17 Flip horizontally / vertically .....................18 Camera time set ............................................18 Camera info .....................................................19 Delete Camera ...............................................19 Troubleshooting / FAQs ................................. 20 User Guide PNMWIFIAC Step 1: Unpack The accessories:
(1) Power adapter
(1) 10 charging cable
(2) Mounting screws WiFi camera WELCOME!
This WiFi Baby Monitor makes it simple to keep your eyes and ears on your little one from anywhere!
This guide takes you through the steps to get started!
Check out our setup videos On your computer, go to http://bit.ly/pnwifi-setup or scan the QR code here. Before you start... Make sure you read the Important Information sheet included in this package. 2 GETTING STARTED Step 2: Position the camera Find a location for the camera that gives you the best view of your baby in his or her crib. Place the camera on a flat surface, like a dresser or shelf, or mount the camera to a wall using the keyhole slots on its bottom (see the mounting template included in this package). IMPORTANT: NEVER place the camera or cords of any kind inside the crib. NEVER place the camera or cords within reach of the baby. WARNING Strangulation Hazard:
Children have STRANGLED in cords. Keep this cord out of the reach of children
(more than 3ft (0.9m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. d e t r a t S g n i t t e G 3 Step 3: Test your WiFi signal Step 4: Plug in the camera G e t t i n g S t a r t e d Your Project Nursery WiFi Camera needs strong enough signal from your WiFi router in order to send its video signal. Heres how to test the strength of your WiFi signal in your babys nursery using your smartphone or other portable wireless device (like a tablet or iPod touch). First, go to where you want to put the camera. Make sure your smartphone or other portable wireless device is connected to the WiFi network you want to test. Look at the WiFi icon on your device screen to see the strength of the connection. For example, on iOS devices look in the upper left-hand corner of the screen for the WiFi icon (shown here). For best results, look for a location with at least 50% strength to use the WiFi camera. 4 Plug one end of the included charging cable into the DC In jack on the back of the camera. Plug the other end into the included power adapter. Then plug the adapter into an outlet or surge protector. The camera turns on automatically when you plug it in (the indicator light on its back panel turns solid red). Step 5: Download and install the Project Nursery Monitor App on your phone or tablet In the Google Play or Apple App Stores, search for PROJECT NURSERY MONITOR and look for the icon shown here. Then download and install the App. Step 6: Launch the Project Nursery Monitor App Once the Project Nursery Monitor App has installed on your smarphone or tablet, press the icon to launch the App. Step 7: Create a Project Nursery user name and password d e t r a t S g n i t t e G Register Login Sign Up Username Email Address Password Confirm Password Sign Up The first time you launch the Project Nursery App, youll need to create a user name and password so that you can access your camera securely. Press the Register button to start, then follow the steps to set up your account. IMPORTANT: Make sure you give a valid email address that you have easy access to. The App will use this address if you ever need to recover or reset your password. Once youve finished creating your user name and password, the App will ask you to Login with the name and password you created. IMPORTANT: Your user name cannot contain special characters (like @)only letters and numbers. 5 G e t t i n g S t a r t e d Step 8: Pair the WiFi camera with the App. Make sure the Project Nursery App is open on your phone or tablet. Also make sure that your phone or table is connected to your WiFi network. In the Apps home screen, press the Camera) in the upper right corner of the screen. icon (Add Add Camera Scan QR code located on bottom of camera Press to open QR code scanner ID:
Camera name:
Next step The next screen in the App lets you name the camera youre setting up and prompts you to scan the QR code on the bottom of the camera. To name the camera youre setting up: Press in the Camera name field and enter the name you want to use. To scan the QR code on the WiFi camera: Find the QR code on the bottom of the WiFi camera. Position your smartphone or tablet so that its camera can scan this QR code. Then press where indicated in the App to scan this QR code. Device List Message My Center Add Camera Add new camera with WiFi Add new camera with QR code Get shared camera from friend Device List Message 6 In the next screen, press the Add new camera with WiFi button. The App will prompt you to make sure your camera is on. If you havent already turned it on, press the POWER button on the right side of the camera
(the cameras LED lights up), then press the Next step button in the App. My Center Sallys Nursery Configure WiFi 1. Your camera should be plugged in and turned ON. Press the Set button on the bottom of your camera for 1 second.You will hear one beep and the LED will start blinking red. 2. Choose WiFi SSID (or network name) and enter password below. Make sure you enter the info correctly. If your WiFi SSID does not have a password, you will need to create one. This is for your safety and security. Consult the user guide for your WiFi router/AP to add a password. Helpful Hint: Click on the lock icon in the password area to hide or display text. 3. After youve entered your WiFi info below, press Next step. Your camera will begin connecting to your WiFi network. This can take 23 minutes to complete. When you hear two beeps and the LED turns solid green, your camera is successfully connected and ready for you to use. Next step After youve scanned the QR code on the bottom of the WiFi Camera, the App will ask you to press the SET button on the bottom of the camera and enter the name (WIFI SSID) and password of your WiFi network. Find the SET button on the bottom of the WiFi camera. Press it for one second (until the camera gives an audio signal). Configure WiFi 1. Your camera should be plugged in and turned ON. Press the Set button on the bottom of your camera for 1 second.You will hear one beep and the LED will start blinking red. 2. Choose WiFi SSID (or network name) and enter password below. Make sure you enter the info correctly. If your WiFi SSID does not have a password, you will need to create one. This is for your safety and security. Consult the user guide for your WiFi router/AP to add a password. Helpful Hint: Click on the lock icon in the password area to hide or display text. 3. After youve entered your WiFi info below, press Next step. Your camera will begin connecting to your WiFi network. This can take 23 minutes to complete. When you hear two beeps and the LED turns solid green, your camera is successfully connected and ready for you to use. Next step Enter the name (WIFI SSID) and password for your home WiFi network in the App. d e t r a t S g n i t t e G IMPORTANT: Double check that youve typed your network name and password correctlyotherwise, the camera wont work with the App!
Once youve finished entering your network name and password, press the Next step button on the App screen. The indicator light on the back of the WiFi camera starts flashingthe camera is trying to join your WiFi network. Configure WiFi Once the WiFi camera has successfully connected to your WiFi network, youll see the Success screen in the App and the indicator light on the back of the camera will turn green. Congratulationsyouve just set up your first camera!
IMPORTANT: If the WiFi camera does not connect, follow the instructions in the App to troubleshoot. 7 Congratulations!
Camera successfully added!
G e t t i n g S t a r t e d Step 9: Choose the camera from the home screen Sallys nursery Device ID1234567891234560 Device List Message My Center Sallys nursery 0 2016-1-28-12:00 H D SD RECORD SNAPSHOT JOYSTICK TALK SOUND ON 8 Sallys nursery Device ID1234567891234560 Press the part of the home screen showing the camera you set up in order to choose this camera. The Camera View screen is your gateway to total control of your WiFi camera from My Center virtually anywhere. Device List Message The next chapter gives you a tour of the features available from this screen. TOUR OF THE SYSTEM Camera View Screen Sallys nursery m e t s y s e h t f o r u o T 2016-1-28-12:00 0
(Settings) accesses the Settings menu for this camera. Press this icon to adjust the WiFi and other settings for this camera. H D SD RECORD SNAPSHOT JOYSTICK TALK SOUND ON
(Multi-Camera View) lets you see multiple cameras at once on a single screen (if youve set up multiple cameras). Press this icon to access the multi-camera view screen. SD (HD-SD Select) lets you switch between high- and standard-
H D definition video on the view screen.
(Micro-SD Card) accesses any content stored on the cameras Micro-SD Card (not included). Press this icon to start viewing or downloading motion/sound-activated videos or images from the cameras Micro-SD Card. (This is where youll see auto recordings.) RECORD (Record) starts/stops recording video. The video file is saved to your smartphone or tablet. SNAPSHOT (Snapshot) takes a still photo of the camera video. The snapshot file is saved to your smartphone or tablet. 9
(Joystick) moves the camera angle. Press and hold in the JOYSTICK direction you want the camera angle to move. (You can also pan/
tilt by swiping on the screen in the direction you want to move.)
(Talk) lets you speak through this cameras built-in speaker. TALK Press and hold this icon to start speaking. SOUND ON (Sound On/Off) turns the sound from the camera on and off. Sallys nursery 2016-1-28-12:00 0 H D SD RECORD SNAPSHOT JOYSTICK TALK SOUND ON T o u r o f t h e s y s t e m 10 Camera (front) Camera (back) Adjustable antenna communicates wirelessly with your WiFi network. DC In jack plugs into your charging cable to power the camera. Nighttime sensor adjusts the camera sensitivity to the amount of ambient light. Microphone picks up sound around the camera. POWER button
(right side) turns the camera on and off (press and hold). Thermal sensor detects the temperature around the camera. m e t s y s e h t f o r u o T Indicator light shows the power and connection status of the camera:
- off (camera not plugged in or powered on)
- solid red (on but not connected
- blinking red (in the process of connecting)
- solid green
(connected to network and App)
- blinking green
(camera being actively viewed). 11 Camera (bottom) T o u r o f t h e s y s t e m Mounting keyholes let you mount the camera on a wall
(mounting screws included). MICRO-SD slot
(left side) accepts a micro-SD card
(not included) for storage of automatic photos/
video. SET starts the WiFi setup process (press and hold). QR code passes the camera ID information to the App during the WiFi setup process. 12 3. EVERYDAY USE Sallys nursery Sallys nursery 0 2016-1-28-12:00 In the Camera View screen, press the
(Settings) icon to customize your 2016-1-28-12:00 0 Settings WiFi cameras setup. This chapter takes you through the settings you can customize, one by one. H D SD Motion detection H RECORD SNAPSHOT Sound detection Battery Life M H L L OFF OFF JOYSTICK TALK SOUND ON Auto-record time 20s 60s 90s Temperature alarm H D SD Music White Noise Share camera with friend Flip horizontally Flip vertically SNAPSHOT Camera time set Camera info JOYSTICK Delete Camera SOUND ON RECORD TALK e s u y a d y r e v E 13 Settings Motion detection H M L OFF Motion detection Sound detection H L OFF IMPORTANT: You must have a micro SD card installed in your WiFi camera to use the auto-
recording function of this feature. Battery Life Auto-record time 60s 90s 20s Temperature alarm Music White Noise Settings Share camera with friend You can set up the App and camera so that you get a notification on your phone and the camera automatically records video when the camera detects that your baby is moving. To set up motion detection: In the Settings menu, press the Motion detection sensitivity setting you want to use: OFF, L (low), M (medium), or H (high). Note: You might want to test different levels of sensitivity for this setting, to find the best fit for your environment and preference. M H L L OFF OFF Sound detection E v e r y d a y u s e Motion detection Flip horizontally H Sound detection Flip vertically Battery Life Camera time set IMPORTANT: You must have a micro SD card installed in your 60s WiFi camera to use the auto-
recording function of this feature. Auto-record time Camera info Temperature alarm 20s 90s Music Delete Camera White Noise Share camera with friend Flip horizontally Flip vertically You can set up the App and camera so that you get a notification on your phone and the camera automatically records video when the camera detects sound from your baby. To set up sound detection: In the Settings menu, press the Sound detection sensitivity setting you want to use: OFF, L (low), or H
(high). Note: You might want to test different levels of sensitivity for this setting, to find the best fit for your environment and preference. Notes about notifications:
+ Pressing on a sound- or motion-detection notification or going to messages shows you a screenshot Camera time set of the motion detection event. To view the video, press the icon in the camera view screen.
+ The App sends a maximum of 2 notifications every 4 minutes. It prioritizes notifications in the Camera info following order: temperature, sound, motion. Delete Camera 14 Settings Motion detection H Sound detection Battery Life M H L L OFF OFF Auto-record time 20s 60s 90s Temperature alarm IMPORTANT: You must have a micro SD card installed in your WiFi camera to use this feature. White Noise Music Share camera with friend Flip horizontally Flip vertically Settings Camera time set Motion detection H Camera info Sound detection M H L L OFF OFF Battery Life Delete Camera Battery Life Auto-record time 90s Push Notifications for Camera Battery 20s 60s Temperature alarm Camera battery fully charged Music White Noise Camera battery low: 25%
Share camera with friend Camera battery critically low Flip horizontally Flip vertically Camera time set Camera info Delete Camera Auto-record time You can set up the camera so that it automatically records a certain amount of video when the camera detects a motion or sound alert. To set up an auto-record time: In the Settings menu, press the amount of Auto-record time you want (in seconds) when a motion or sound alert is triggered: 20s, 60s, or 90s. Battery life This setting tells the battery status of rechargeable WiFi cameras. IMPORTANT: This setting does not apply to this WiFi camera. e s u y a d y r e v E 15 Settings Motion detection H Sound detection Battery Life M H L L OFF OFF Auto-record time 20s 60s 90s Temperature alarm Music White Noise Share camera with friend Flip horizontally Flip vertically Camera time set Settings Camera info Motion detection H M Delete Camera H Sound detection L L OFF OFF Battery Life Auto-record time 20s 60s 90s Temperature alarm Music White Noise Music Share camera with friend
"I Don't Want to Miss a Thing"
Flip horizontally
"Holiday"
Flip vertically
"Jolene"
Camera time set Rain Camera info Waves Delete Camera White Noise 16 E v e r y d a y u s e Temperature alarm These alerts tell you when your babys room is too hot or too cold. 1 In the Settings menu, press Temperature alarm. 2 In the Temperature alarm menu, press Edit at the top of the screen to change the settings. To change from degrees Fahrenheit to Celsius: Press the C. To set a high temperature alert: Press the switch next to High temperature alert. Then set the temperature you want for the high temperature alert. To set a low temperature alert: Press the switch next to Low temperature alert. Then set the temperature you want for the high temperature alert. If the temperature in your babys room goes beyond the limit(s) you set, you will get a push notification on your phone or tablet. Music This Project Nursery system comes with 3 lullabies, 2 nature sounds, and white noise ready to playsimply choose the one you want, and the camera youre on will play it back. To play a lullaby, nature sound, or white noise from the active camera: Press Music in the Setup menu. Then press the option you want to play. Note: Make sure youre displaying the camera you want to play the lullaby on. If you want to play on a different camera, go back to the Apps home screen and choose that camera. Sound detection H L OFF Battery Life Auto-record time 20s 60s 90s Temperature alarm Music White Noise Share with friend Share camera with friend Flip horizontally Flip vertically Camera time set Camera info Delete Camera Steps to share with friend Decice List Add Camera Add new camera with WiFi Add new camera with QR code Get shared camera from friend Step 1: Open App and click then Add camera button above in your friends mobile phone Step 2: Select the third option and scan the QR code above Share camera with friend The Project Nursery WiFi Camera lets you share video with friends and family, so that they can see whats happening with baby. These guest accounts have limited access to settingsthey can view and talk through cameras and record pictures and videos directly to their phone. 1 Make sure the person you want to share with has downloaded the Project Nursery App on their phone or tablet. 2 On your phone or tablet, go to the Settings menu and press Share camera with friend. Have the person you want to share with follow the steps shown. IMPORTANT: Your friend or family member will need to scan the QR code on the screen. If they are not physically present to do so, either print the screen or do a screenshot and send it to a phone they can scan with their phone. e s u y a d y r e v E 17 Battery Life Settings 20s L 60s OFF 90s Auto-record time H Motion detection M Temperature alarm H White Noise Music L OFF Sound detection Battery Life Flip horizontally / vertically Flip horizontally and vertically let you reverse the orientation of the Camera View video. Press the switches next to each to toggle these on and off. Camera time set The WiFi cameras internal clock might need to be periodically syncronized with your phones clock. If you notice the two times dont match, choose Camera time set in the Apps Settings menu, and press the Camera time sync button at the bottom of the page. The App will sync the current WiFi cameras clock with your phone or tablets clock. Share camera with friend Auto-record time 20s 60s 90s Flip horizontally Temperature alarm Flip vertically Music White Noise Camera time set Share camera with friend Camera info Flip horizontally Flip vertically Delete Camera Camera time check Camera time set Camera info Delete Camera The camera time on the screen is from network. If you find the camera time is not the same with the mobile phone, please click the button below to synchronize time. Camera time sync E v e r y d a y u s e 18 Music White Noise Share camera with friend Flip horizontally Flip vertically Camera time set Camera info Device info Settings Camera info Motion detection H Delete Camera Device name Serial #
MAC address Battery Life Sound detection Hardware version M IP Camera OFF L 215451516514 L H 442412314575756 OFF 20130101 Software version Auto-record time 20s Temperature alarm BNHS5750101 60s 90s The Device info screen gives you details about the current WiFi camera, including the amount of memory left on the micro-SD card if you have one installed. The Format SD card button at the bottom of the Camera info screen lets you format a micro-SD card before you use it for the first time. Music Space capacity Use Available Share camera with friend White Noise Flip horizontally Flip vertically Format SD card Camera time set Camera info Delete Camera 3.0GB 2.0GB To format a micro-SD card: Insert the card into the WiFi cameras micro-SD card slot. Then press the Format SD card button at the bottom of the Camera info page. e s u y a d y r e v E Delete Camera If youve tried all of the troubleshooting solutions to solve a problem, and nothing seems to work, you might need to reset the WiFi camera and App to their factory settings and start setup again. WARNING: Delete camera erases all of your custom settings. You will have to set up the WiFi camera from scratch. 19 4. TROUBLESHOOTING / FAQS Most issues with the Project Nursery baby monitoring system can be solved by following one of the troubleshooting tips below. For additional assistance, please call 1-844-393-7338. I cant connect the WiFi camera to my network.
+ Make sure your phone or tablet is connected to the WiFi network you want to use.
+ Make sure the camera is getting a good signal from your WiFi router. See page 4 for more information.
+ Make sure your router is broadcasting its SSID (name). The Project Nursery WiFi camera does not support hidden SSIDs.
+ Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi.
+ Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method.
+ Make sure that there is no MAC filter on router or add MAC address to router whitelist.
+ Reset the camera to set up connection again. Press and hold SET key for 10 seconds. The camera will give a long beep when it is fully reset. The WiFi cameras indicator light remains red (connection to network failed).
+ Double check that youve entered the correct password for your WiFi network in the Project Nursery App.
+ Test your WiFi network with other devices to make sure its working.
+ Make sure the camera is getting a good signal from your WiFi router. See page 4 for more information.
+ Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi.
+ Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method. T r o u b l e s h o o t i n g 20 The WiFi cameras indicator light flashes green.
+ The camera is being actively viewed. I dont see video from the camera on my phone/tablet.
+ Make sure the camera is turned on and that it has enough charge or is plugged in to a working outlet.
+ Make sure the camera is within range of your WiFi router (certain kinds of signal obstacles, like large metal objects, might shorten the range somewhat).
+ Make sure your phone/tablet has an active data or WiFi connection and that the Project Nursery App is open and configured with the camera. I cant record video or pictures on the camera (for motion or sound alerts).
+ Make sure you have an Micro SD card (not included) inserted in the MICRO SD card slot on the side of the parent monitor.
+ Make sure auto-record is set to on and a motion or sound alert is set. I cant record video or pictures on my phone/tablet.
+ Make sure your phone/tablet has enough available memory to record video or pictures. My video feed is frozen.
+ Check the time stamp on the video feed screen to make sure the video is frozen. Then return to the camera home screen and reload that camera again.
+ Close the app and re-open. I cant pan/tilt the camera from my phone or tablet.
+ Make sure the camera is moving freely. In certain positions, the camera might bump into the stand neck. If the neck is in the way, pan or tilt the camera in the other direction so that you have a free range of movement. The App is frozen.
+ Force close the App on your phone or tablet. Then re-open it. g n i t o o h s e l b u o r T 21 I cant hear sounds from babys room.
+ Make sure the volume on your phone or tablet is turned up.
+ Make sure sound is turned on in the Camera view screen.
+ Make sure the microphone on the camera is not blocked. The microphone is just below the lens. The lullabies/sounds arent playing.
+
If you have multiple cameras, make sure youve chosen the one you want the lullabies to play on before you start the lullaby. Go to the Home screen and choose the camera you want. Then go to Settings, then Music and select an option to play. The temperature alerts dont work.
+ Make sure youve set the temperature preference to the system you use, Fahrenheit (standard in the US) or Celsius (standard outside the US). To switch your temperature preference, go to Settings >
Temperature alarm.
+ Make sure youve set the right kind of temperature alertfor example, if you want to make sure your babys room does not get below 68 degrees Fahrenheit, set the Low Temperature Alert to 68. If you want to make sure your babys room doesnt get above a certain temperature, set the High Temperature Alert to that temperature. Motion alerts dont work.
+ You might need to adjust the sensitivity of the alertsfor example, if Motion detection is set to Low, the monitor will not come on as often as when Motion detection is set to Medium or High. To adjust this setting, go to Settings > Motion detection. If you have multiple cameras, you might need to set an alert for the camera youre usingmotion alerts need to be set separately for each camera.
+
+ The App gives a maximum of 2 notifications every 4 minutes. T r o u b l e s h o o t i n g 22 Sound alerts dont work.
+ You might need to adjust the sensitivity of the alertsfor example, if Sound detection is set to Low, the monitor will not come on as often as when Sound detection is set to High. To adjust this setting, go to Settings > Sound detection. If you have multiple cameras, you might need to set an alert for the camera youre usingsound alerts need to be set separately for each camera.
+
+ The App gives a maximum of 2 notifications every 4 minutes. Id like to stop sharing the camera view with a friend/family member.
+ Go to the Settings menu in the Project Nursery App on your phone/tablet and select Delete camera at the bottom of the menu. This will stop all sharing, but youll need to set up the camera again on your phone. Id like to give someone full access to my camera (including settings).
+ Guess accounts have limited access to settings. If you want to give someone full access, you will need to give them your account log-in info and password (not recommended!). I cant access the camera from my computer.
+ The Project Nursery WiFi camera works with the Project Nursery App on iOS and Android devices only. It does not support computers or other mobile device operating systems. I cant open the App on my Android tablet.
+ The Project Nursery App is not compatible with some makes and models of Android tablets. Contact our customer service at 1-844-393-7338 to see if your Android tablet is compatible with the Project Nursery App. 23 2017 Voxx Accessories Corp. 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268 PNMWIFIAC IB 05b