FCC ID: VIXAWSF6R Bluetooth Speaker

rechargeable wireless speaker with LED flickering flame light Quick Start Guide Instructions en franais ......................................................... 7 Instrucciones en espaol ..................................................... 13 AWSF6RBK QSG 00 1 Unpack Make sure the following items came in this package:

(1) Rechargeable Wireless Speaker

(1) Power adapter 2 Charge the speaker Before you start using the speaker for the first time, its a good idea to charge it completely. To charge the speaker: Open the rubber door covering the jacks on the back the speaker. Plug the included power adapter into the DC IN jack behind this door. Plug the other end of the power adapter into a power outlet. The charging indicator is red while the speaker is charging. It turns green when its fully charged. Note: You can use the speaker while its charging. Power adapter Speaker Speaker back Power/Pair Volume Add Speaker Lighting Modes DC In Aux In Turn the speaker on Press and hold the it on. button on back of the speaker to turn The Power/Pair indicator starts blinking blue. Power/Pair Volume DC In Aux In Power/Pair Volume Add Speaker Lighting Modes DC In Aux In Speaker back 3 2 4 Pair and connect to your phone Enable Bluetooth on your smartphone or other device (if it isnt already on). Make sure the Power/Pair indicator on the speaker is blinking rapidly.

(If it isnt, give a quick double press to the gives an audio signal.) button. The speaker Power/Pair Volume DC In Aux In Note: If youve previously paired a different Bluetooth device with this speaker, the speaker will automatically attempt to reconnect to that device when you switch the speaker on. If you want to pair to a new device, double-press the button on the speakerthe speaker gives an audio signal. Choose AR Sedona from the pairing options on your smartphone. (If its not in the list, choose Scan from your phones Bluetooth menu.) The speaker gives an audio signal when its finished pairing and connecting to your smartphone. The Power/Pair indicator turns solid blue. Note: The process of enabling Bluetooth and connecting varies from device to device. See your devices owners manual for more information and specific instructions. Bluetooth Wireless Connection Tips Make sure the Bluetooth capability of your device is turned on. Make sure theres nothing plugged into the speakers AUX IN jack when youre trying to use Bluetooth. The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your devices Bluetooth performance, etc. If youre having problems connecting to the speaker, move closer to it. If your device asks you for a password to connect, use 0000. If youre having trouble reconnecting, try the following solutions:

Find the device named AR Sedona in the Bluetooth menu on your phone, and remove (or forget) this device. Then start the pairing process described in this section again to re-pair and connect. With the speaker on, press and hold the Volume and Volume + buttons for 6 seconds until the speaker gives an audio signal and turns off. This resets the speaker. Then, remove AR Sedona from your phones Bluetooth devices and repeat the pairing process. 5 Start playing music on your device Set your devices volume for music to 50%. Start playing music or other audio on your device. Within seconds, the speaker starts streaming the audio wirelessly via Bluetooth. To adjust the volume of your audio: Give a quick press to the speakers Volume + or button

(on the back panel) or use the volume controls on your phone. TIP: If youre playing music via Bluetooth, a quick single-press on the speakers pause/play. button will 3 Adding Speakers (Stereo Mode) If you have a second AR Sedona wireless speaker, you can use it together with this one in stereo mode. To use 2 AR Sedona speakers together in stereo mode:

Power/Pair 1. Turn on both speakers. (Press and hold the Power/Pair button on the back of each.) Volume Add Speaker Lighting Modes 2. Press and hold the Add Speaker button on the back of the first speaker until the Power/Pair light starts flashing white. 3. Press and hold the Add Speaker button on the back of the second speaker until its Power/Pair light starts flashing white. 4. The speakers announce left connected and right connected when theyre ready to play in stereo. DC In Aux In Power/Pair Volume Add Speaker Lighting Modes DC In Aux In Speaker back Once the speakers are connected with each other, the left speaker will try to pair to your phone (its Power/Pair light will blink fast). Find the AR Sedona in your phones Bluetooth menu and connect to it. Once the speakers are connected to your phone, the right speakers Power/

Pair light will go solid white. The lefts Power/Pair light also goes solid white and blinks off every 5 seconds. Keep your phone close to the left speakerthats the one its connected to!

Using the Lighting Modes The Lighting Mode buttons give you control over this speakers built-

in multi-mode lighting. You can use the lighting whether the speakers on or off. Power/Pair Volume Add Speaker Lighting Modes Press the Lighting Modes button to cycle through the multiple lighting modes:

Big Flame and Small Flame provide different levels of the speakers flame lighting effect. DC In Aux In Pulsing Flame provides a flame effect that pulses to the beat of your music. Power/Pair Volume Add Speaker Lighting Modes DC In Aux In Speaker back White Light provides a soft white light. Off turns the speakers lighting off. 4 Using the AUX input Use a mini-jack audio cable (not included) to connect the audio out-

put from your device to the Aux In audio input on the speakers back panel (open the rubber door to access the jack). The speaker auto-

matically switches to the Aux In audio. (For two-speaker setups, plug into the one whose Power/Pair light is blinking every 5 seconds.) To listen to Bluetooth audio again, unplug the cable from the speakers Aux In jack. Power/Pair Volume Add Speaker Lighting Modes DC In Aux In Tour of the wireless speaker Power/Pair indicator shows the connection status of the speaker:

Speaker back Power/Pair Volume Add Speaker Lighting Modes Solid bluethe speaker is connected via Bluetooth. Fast blinking bluethe speaker is ready to pair via Bluetooth. Slow blinking bluethe speaker is reconnecting via Bluetooth. Solid white(single speaker) an audio cable is plugged into the Aux In jack or (stereo speakers) the right speaker is linked for stereo sound. Slow blinking whitethe two speakers are trying to link for stereo sound. Fast blinking white (left speaker only) means this speaker is ready to pair via Bluetooth. button turns the speaker on and off (press and hold), initiates pairing with a Bluetooth device (double press), or initiates reconnection with a previously paired device (single press). It also functions as a play/

pause button when Bluetooth audio is playing. Aux In DC In Volume and + adjust the speakers volume (quick press). They also function as skip back and forward buttons when Bluetooth audio is playing (press and hold). Add Speaker pairs two AR Sedona speakers to work in stereo. Press and hold on one speaker then the other to set up. Lighting Modes button turns lighting on/off and cycles through the lighting modes. DC In jack connects to the power adapter provided to power or charge the speaker. Aux In jack lets you connect directly to the speaker to listen to an audio source. Charging indicator is red when the speaker is charging and turns solid green when the speaker is charged. 5 If you have any questions about this product, visit Acoustic-Research.com

Confidentiality Request regarding application for FCC ID: VIXAWSF6R SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States To:

Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Paul Tinaphong Signature:

On behalf of Company: Voxx Accessories Corp. Telephone: (317)218-7301 E-mail: ptinaphong@voxxintl.com Title: Senior V.P.

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: Dec 6, 2019 Regarding: FCC ID: VIXAWSF6R To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voxx Accessories Corp. This authorization is valid until further written notice from the applicant. Print Name: Paul Tinaphong Signature:

On behalf of Company: Voxx Accessories Corp. Telephone: (317)218-7301 E-mail: ptinaphong@voxxintl.com Title: Senior V.P.