Unpack 1. Charge the EarCanz TRU 2. Turn on the EarCanz TRU Make sure you have the following items in your 808 EarCanz TRU package:
For best performance, we recommend you charge your EarCanz TRU earbuds fully before using them. 808 EarCanz TRU Bluetooth earbuds Micro USB charging cable Eartips in 3 sizes Ear ns in 3 sizes Travel case Right and left earbuds (side) Right and left earbuds
(bottom) If you have any questions about this product, visit 808Audio.com or call our toll-free help line at 1-800-732-6866. Open the of each earbud. aps on the bottom Plug the micro-USB ends of the included USB charging cable into the charging jack behind the ap on each earbud. Plug the other end of the charging cable into a USB power source (like a computer or a USB charger). The indicator light on the side of each earbud turns red while that earbud is charging. It turns white when the earbud is fully charged. Right ear Right earbud R Left ear:
FRONT Right ear:
BACK Unplug the USB charging cables when the earbuds are charged. Place each earbud in its assigned ear (marked R or L on the inside of each bud). To turn on the EarCanz TRU:
Press and hold the button on each earbud (front of the left, back of the right) for about 3 seconds, until you hear power on from each earbud. IMPORTANT: You must turn each earbud on separately! For best results, press both time. at the same Linking for Wireless Stereo After you turn them both on, the earbuds start the linking process for wireless stereo. The indicator on the back of each earbud starts blinking red, then white when the earbuds are linked to each other. The left earbud says left connected and the right says right connected. Now youre ready to pair with your smartphone or other Bluetooth device!
If you dont hear left connected and right connected:
Turn the earbuds o& (press and hold the button until they say power o&). Then turn them both back on again. TIP: You can use the right earbud by itself as an earpiece for Bluetooth calls. Just turn it on by itself (and leave the left earbud o&). To turn the EarCanz TRU o": Press and hold the one of the earbuds for 3 seconds. button on 3. Pair + Connect Enable Bluetooth on your smartphone or other device. 8:45PM Wi-Fi Wi-Fi Settings Bluetooth Bluetooth Settings VPN Settings Choose 808 EarCanz TRU from the pairing options on your smartphone. (If its not in the list, choose Scan from your phones Bluetooth menu.) IMPORTANT: If youve previously paired your phone or other Bluetooth device with these earbuds, the earbuds will automatically attempt to reconnect to that device when you turn them on. If you want to pair to a new device, turn Bluetooth o& on the previously paired device. The earbuds will enter pairing mode. Then choose 808 EarCanz TRU from the pairing options on the new device. The earbuds say device connected when the process is complete. The indicators blink white every 6 seconds. Note: The process of enabling Bluetooth and connecting varies from device to device. See your devices owners manual for more information and specic instructions. 3. Pair + Connect (continued) Using the EarCanz TRU Bluetooth Wireless Connection Tips Make sure the Bluetooth capability of your device is turned on. The earbuds Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your devices Bluetooth performance, etc. If youre having problems connecting to the earbuds, move closer to your phone. Make sure your device supports audio transfer A2DP. If your device asks you for a password to connect, use 0000. To pair the EarCanz TRU again After turning your earbuds back on, they automatically attempt to reconnect to the last connected device. If the last connected device is not available, the earbuds will enter pairing mode and be ready to pair to a new or di&erent device. Forget to turn on your devices Bluetooth before turning on the earbuds? Just give a quick single-press to the button on either earbud once you ve turned on your devices Bluetooth to reconnect to it. Putting the EarCanz TRU in your ears The EarCanz TRU earbuds come with medium-sized eartips and ear ns installed. You can use di&erent-sized tips and ns, but rst try them with the medium sizes. Left earbud Left ear L Find the L and R markings on the buds. Place each eartip in your ear as shown here. The n should go in the small ridge just above your ear canal on your outer earit might go automatically, or you might need to move it into place. If the tips or ns dont t, follow the directions in the next section to change them. Changing the eartips or fins Answering/ending phone calls If you want to use a di&erent size ear n or bud, nd the size you want, and match the L/R ns to L/R buds. Listening to music Set your devices volume for music to 50%. Note: This is to make sure the sound from the earbuds isnt too loud when you start streaming. Start playing music or other audio on your device. Within seconds, the earbuds start streaming the audio wirelessly via Bluetooth. Controlling playback and volume button on either earbud lets you control music playback The wirelessly. To play/pause music: Press the To adjust volume: Use the volume controls on your phone. button. The right earbud has a built-in microphone, so you can use it for phone calls. Your phone will ring through the right earbud when youre receiving a call. To answer or end a phone call: Give a short press on the button. To decline a phone call: Press and hold the second. button for one IMPORTANT: Not all phones support playback control and phone answer/
end control. Check your phones user manual for more information if youre having trouble with these functions. Turning the EarCanz TRU Off To turn the EarCanz TRU o": Press and hold the one of the earbuds for 3 seconds. button on quick start guide HPA225 QSG 01