| all | frequencies |
|
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|---|
| manuals | photos | label | ||||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Safety Instruction | Users Manual | 462.95 KiB | August 08 2019 | |||
| 1 |
|
User Manual | Users Manual | 2.36 MiB | August 08 2019 | |||
| 1 |
|
Internal Photos | Internal Photos | 2.95 MiB | August 08 2019 | |||
| 1 |
|
External Photos | External Photos | 1.06 MiB | August 08 2019 | |||
| 1 |
|
Label | ID Label/Location Info | 841.18 KiB | August 08 2019 | |||
| 1 |
|
Authorization Letter | Cover Letter(s) | 391.62 KiB | August 08 2019 | |||
| 1 | Block Diagram | Block Diagram | August 08 2019 | confidential | ||||
| 1 |
|
Confidentiality Letter | Cover Letter(s) | 625.26 KiB | August 08 2019 | |||
| 1 | Operational Description | Operational Description | August 08 2019 | confidential | ||||
| 1 |
|
RF Exposure Report | RF Exposure Info | 327.86 KiB | August 08 2019 | |||
| 1 | Schematics | Schematics | August 08 2019 | confidential | ||||
| 1 |
|
Test Report | Test Report | 2.56 MiB | August 08 2019 | |||
| 1 |
|
Test Setup Photos | Test Setup Photos | 852.48 KiB | August 08 2019 |
| 1 | Safety Instruction | Users Manual | 462.95 KiB | August 08 2019 |
Important Information for Singsation Model SPKA25 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE FOR FUTURE REFERENCE 11. WARNING: Only use attachments/
accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Important Battery Precautions Any battery may present a risk of fire, explosion, or chemical burn if abused. Do not try to charge a battery that is not intended to be recharged, do not incinerate, and do not puncture. Non-rechargeable batteries , such as alkaline batteries, may leak if left in your product for a long period of time. Remove the batteries from the product if you are not going to use it for a month or more. If your product uses more than one battery, do not mix types and make sure they are inserted correctly. Mixing types or inserting incorrectly may cause them to leak. Discard any leaky or deformed battery immediately. They may cause skin burns or other personal injury. Please help to protect the environment by recycling or disposing of batteries according to federal, state, and local regulations. Do not mix old and new batteries Do not mix alkaline, standard (carbon-zinc), or rechargeable
(Ni-Cad, Ni-MH, etc.) batteries. This is class II equipment designed with double or reinforced insulation so it does not require a safety connection to electrical earth (US: ground). Plugging in for power AC OUTLET POWER SUPPLY: 100240 V ~ 50/60 Hz CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Care and Maintenance Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface. Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock. If the speaker is used outside on a deck or patio, make sure you take it indoors in the event of a rainstorm to prevent possible damage. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. No naked flame sources, such as lighted candles, should be placed on the apparatus. WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Do not install this equipment in a confined space such as a book case or similar unit. The ventilation should not be impeded by covering the ventilation openings with Items such as newspaper, table-cloths, curtains etc. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Care is required with the use of this apparatus in moderate climates. See marking on the back of the product. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Caution: Changes or modifications not expressly approved by VOXX Accessories Corporation could void the users authority to operate the equipment. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Regulatory Information This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Industry Canada Regulatory Information CAN ICES-3 (B)/NMB-3 (B) IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Avis dIndustrie Canada CAN ICES-3 (B)/NMB-3 (B) Information sur la rglementation dIndustrie Canada Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Information sur la rglementation dIndustrie Canada CAN ICES-3 (B)/NMB-3 (B) Dclaration IC sur lexposition aux radiations : cet quipement est conforme aux limites dexposition stipules par IC pour un environnement non contrl. Cet quipement doit tre install et utilis en respectant une distance minimale de 20 cm entre lmetteur de radiations et vous-mme. Cet metteur ne doit pas tre proche ou fonctionner en conjonction avec une autre antenne ou metteur. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VOXX Accessories Corporation is under license. Other trademarks and trade names are those of their respective owners. Stock media provided by Stuart Duffield, SoundIdeasCom, CreativeDot, tytonsound, jdgehlert, randomplayer, AppleBeamStudios, sounddogs, ProSoundEffects, and Pond5. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No.: _____________________________________________________________________________________________ Purchase Date: _________________________________________________________________________________________ Dealer/Address/Phone: __________________________________________________________________________________ Information importante pour Singsation Modle SPKA25 IMPORTANTES INSTRUCTIONS DE SCURIT BIEN LIRE ET CONSERVER POUR RFRENCE ULTRIEURE 11. AVERTISSEMENT : Utiliser uniquement des accessoires spcifis par le fabricant. 12. Utiliser seulement avec le chariot, le socle, le trpied, le support ou la table spcifis par le fabricant, ou le dispositif vendu avec lappareil. Quand un chariot est utilis, faire preuve de prudence lors du dplacement de lensemble chariot/
appareil afin dviter toute blessure provoque par un basculement ventuel. 13. Dbrancher cet appareil pendant les orages lectriques ou sil nest pas utilis pendant de longues priodes. 14. Confier lentretien de lappareil un technicien agr. Faire rparer lappareil sil a t endommag de quelque manire que ce soit, par exemple si le cordon dalimentation, ou la fiche, est endommag(e), si du liquide a t renvers sur lappareil ou si des objets sont tombs sur lappareil, sil a t expos la pluie ou lhumidit, sil ne fonctionne pas normalement ou sil est tomb. Prcautions importantes relatives aux piles Toute pile peut prsenter un risque dincendie, dexplosion ou de brlure chimique en cas de traitements inappropris. Ne pas essayer de charger une pile qui nest pas conue pour tre recharge, ne pas lincinrer et ne pas la percer. Les piles non rechargeables, par exemple les piles alcalines, peuvent fuir si on les laisse dans un appareil pendant une longue priode. Enlever les piles du produit sil nest pas utilis durant un mois ou plus. Si le produit fonctionne avec plusieurs piles, ne pas mlanger diffrents types de piles, et veiller les insrer correctement. Mlanger les piles ou les insrer incorrectement peut provoquer des fuites. Jeter immdiatement toute pile prsentant des fuites ou toute pile dforme. Ces piles peuvent provoquer des brlures ou dautres types de blessures. Protger lenvironnement en recyclant ou en liminant les piles conformment aux rglementations provinciales et locales. Ne pas mlanger des piles neuves avec des piles anciennes. Ne pas mlanger des piles alcalines, standard (carbone-zinc) ou rechargeables (cadmium-nickel). Cet appareil de classe II est dot dune isolation double ou renferme et ne requiert pas de mise la terre de scurit. Branchement ALIMENTATION COURANT ALTERNATIF :
100240 V ~ 50/60 Hz MISE EN GARDE : Les consignes de maintenance de cette notice sont destines uniquement aux techniciens qualifis. Afin de rduire les risques dlectrocution, neffectuez aucune tche dentretien autre que celles dcrites dans les consignes de fonctionnement si vous ntes pas qualifi. Entretien et maintenance Toujours utiliser un chiffon doux pour nettoyer le haut-
parleur et lmetteur. Ne jamais utiliser un produit qui contient de lalcool ou dautres solvants, car il risque dendommager la surface. Faire preuve de prudence lors du branchement des transformateurs dans une prise de courant alternatif, afin dviter les risques de choc lectrique. Si les haut-parleurs sont utiliss lextrieur, sur une terrasse ou sur un patio, veiller les rentrer lintrieur en cas dorage pour viter de les endommager. Lappareil ne doit tre expos ni un gouttement ni des claboussures. Aucun objet rempli de liquide, par exemple un vase, ne doit tre plac sur lappareil. Aucune source de flamme nue, comme une chandelle allume, ne doit tre dpose sur lappareil. AVERTISSEMENT : La prise lectrique ou le coupleur est utilis comme dispositif de dconnexion, celui-ci doit rester facilement accessible. Ne pas installer ce matriel dans un espace confin comme une bibliothque ou un meuble similaire. La ventilation ne doit pas tre gne par lobstruction des ouvertures de ventilation avec des objets tels que journaux, nappes, rideaux, etc. AVERTISSEMENT : Les piles ne doivent pas tre exposes une chaleur excessive, par exemple la chaleur dgage par le soleil, un feu, etc. Des prcautions sont ncessaires pour lutilisation de cet appareil dans des climats modrs. Se reporter aux inscriptions au dos du produit. Instructions de scurit importantes 1. Lire ces instructions. 2. Conserver ces instructions. 3. Respecter tous les avertissements. 4. Suivre toutes les instructions. 5. Ne pas utiliser cet appareil prs de leau. 6. Nettoyer seulement avec un chiffon sec. 7. Ne bloquer aucune ouverture de ventilation. Installer conformment aux instructions du fabricant. 8. Ne pas installer prs dune source de chaleur, par exemple des radiateurs, des registres de chaleur, des poles ou autres appareils (amplificateurs, par exemple) qui produisent de la chaleur. 9. Ne pas contourner le dispositif de scurit de la fiche polarise ou de la fiche de type mise la terre. Une fiche polarise est munie de deux lames, dont lune est plus large que lautre. Une fiche de mise la terre est munie de deux lames et dune troisime broche de mise la terre. La lame large ou la troisime broche sont fournies pour garantir la scurit. Si la fiche fournie nentre pas dans la prise, consulter un lectricien pour le remplacement de la prise obsolte. 10. Protger le cordon dalimentation de manire ne pas marcher dessus ni le pincer, surtout au niveau de la fiche, de la prise ou de la sortie du cordon de lappareil. Dclaration de la FCC Cet appareil est conforme la partie 15 du rglement de la FCC. Le fonctionnement est sujet aux deux conditions suivantes :
1) Cet appareil ne doit pas provoquer de brouillage prjudiciable et (2) cet appareil doit accepter tout brouillage reu, y compris le brouillage susceptible de provoquer un fonctionnement indsirable. Remarque : cet quipement a t soumis des essais et a t dclar conforme aux limites stipules pour un appareil numrique de classe B, conformment aux spcifications de la partie 15 du rglement de la FCC. Ces limites ont pour but dassurer une protection raisonnable contre le brouillage nuisible dans une installation rsidentielle. Cet quipement produit, utilise et peut mettre de lnergie en radio frquence et, sil nest pas install et utilis conformment aux directives, il peut causer un brouillage nuisible dans les communications radio. Cependant, il est impossible de garantir quaucun brouillage ne se produira dans une installation particulire. Si cet quipement cause un brouillage de la rception de radio ou de tlvision, ce quil est possible de dterminer en teignant puis en rallumant lquipement, lutilisateur est pri dessayer de corriger le brouillage au moyen de lune ou de plusieurs des mesures suivantes :
Attention : les changements ou les modifications effectues qui ne sont pas expressment approuvs par VOXX Accessories Corporation peuvent annuler lautorisation accorde lutilisateur de se servir de lquipement. Rorienter ou dplacer lantenne de rception. Augmenter la distance sparant lquipement du rcepteur. Brancher lquipement dans une prise dont le circuit est diffrent de celui o est branch le rcepteur. Consulter le revendeur ou un technicien expriment de radio/tlvision. Dclaration FCC sur lexposition aux radiations Cet quipement est conforme aux normes dexposition de la FCC en matire de radiations dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis en respectant une distance minimale de 20 cm entre lmetteur de radiations et vous-mme. Cet metteur ne doit pas tre proche ou fonctionner en conjonction avec une autre antenne ou metteur. Information sur la rglementation dIndustrie Canada Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Information sur la rglementation dIndustrie Canada CAN ICES-3 (B)/NMB-3 (B) Dclaration IC sur lexposition aux radiations : cet quipement est conforme aux limites dexposition stipules par IC pour un environnement non contrl. Cet quipement doit tre install et utilis en respectant une distance minimale de 20 cm entre lmetteur de radiations et vous-mme. Cet metteur ne doit pas tre proche ou fonctionner en conjonction avec une autre antenne ou metteur. Le mot servant de marque et les logos de Bluetooth sont des marques dposes et sont la proprit de Bluetooth SIG, Inc. et toute utilisation de telles marques par VOXX Accessories Corporation est effectue sous licence. Toutes les autres marques de commerce et dnominations commerciales sont celles de leurs propritaires respectifs. Mdia de stockage fourni par Stuart Duffield, SoundIdeasCom, CreativeDot, tytonsound, jdgehlert, randomplayer, AppleBeamStudios, sounddogs, ProSoundEffects et Pond5. Information sur le produit Conserver la facture comme preuve dachat, ainsi que pour obtenir des pices et toute rparation couverte par la garantie. Attacher la facture ici et inscrire le numro de srie et de modle comme rfrence en cas de besoin. Ces numros se trouvent sur le produit. Numro de modle : ____________________________________________________________________________________________ Date dachat : __________________________________________________________________________________________________ Adresse/tlphone du revendeur : ________________________________________________________________________________ Informacin importante para Singsation modelo SPKA25 IMPORTANTES INSTRUCCIONES DE SEGURIDAD FAVOR DE GUARDAR ESTO PARA UNA REFERENCIA FUTURA 11. ADVERTENCIA: Utilice slo aditamentos o accesorios especificados por el fabricante. 12. Use slo con el carrito, base, trpode, soporte o mesa especificados por el fabricante o vendidos con el aparato. Si usa un carrito, tenga cuidado al mover el aparato y el carrito juntos para evitar lesiones si se vuelcan. 13. Desenchufe este aparato en caso de tormentas o de lapsos prolongados de inactividad. 14. Solicite al personal tcnico calificado todo tipo de mantenimiento del producto. Es necesario darle mantenimiento al aparato si ha sido averiado de alguna forma, por ejemplo, si se ha daado el cable de alimentacin o el enchufe, si se le ha derramado algn lquido encima, si han cado objetos en su interior, si ha sido expuesto a la lluvia o la humedad, si no funciona correctamente o si se ha dejado caer. Precauciones importantes sobre las bateras Todas las bateras podran presentar riesgo de incendio, explosin o quemadura qumica si se utilizan de manera negligente. No intente cargar una batera que no ha sido diseada para ser recargada; no la incinere ni la perfore. Las bateras no recargables, tal como las bateras alcalinas, podran presentar fugas si se dejan instaladas por un perodo de tiempo prolongado. Extraiga las bateras del producto si no piensa utilizar la unidad por espacio de un mes o ms. Si el producto utiliza ms de una batera, no combine diferentes tipos de bateras y asegrese que estn instaladas correctamente. Las bateras podran presentar fugas si se combinan distintos tipos o si se instalan incorrectamente. Deseche inmediatamente cualquier batera que presente fugas o que est deformada. stas pueden ocasionar quemaduras en la piel u otras lesiones. Ayude a proteger el medio ambiente reciclando o desechando las bateras segn lo disponen los reglamentos federales, estatales y locales. No combine bateras nuevas y viejas. No combine diferentes tipos de bateras: alcalinas, estndar
(carbn-zinc) o recargables (nquel-cadmio). Este es un equipo clase II diseado con doble aislamiento o refuerzo de manera que no requiera una conexin de seguridad a tierra elctrica (EE.UU.: tierra). Conexin a la red FUENTE DE ALIMENTACIN CA: 100 240 V ~ 50/60 Hz Declaracin de la Comisin Federal de Comunicaciones de los Estados Unidos Este dispositivo cumple con la Parte 15 de las Reglas de la FCC. Su funcionamiento est sujeto a las siguientes dos condiciones:
1) Este dispositivo no debe causar interferencia y 2) Este dispositivo debe aceptar toda interferencia recibida, incluida aqulla que puede causar un funcionamiento no deseado. Aviso: Este equipo ha sido probado, y se consider que cumple con los lmites de los aparatos digitales de Clase B, de acuerdo con las especificaciones de la Parte 15 de las Reglas de la FCC. El objetivo de estos lmites es ofrecer una proteccin razonable contra interferencias nocivas en una instalacin residencial. Este equipo genera, utiliza y puede radiar energa de radiofrecuencia y, si no se instala y utiliza de acuerdo con estas instrucciones, puede generar interferencia perjudicial para las radiocomunicaciones. Sin embargo, no se garantiza que no se producir interferencia en una instalacin en particular. Si su equipo causa interferencia perjudicial para la recepcin de radio o televisin, que se puede averiguar apagando y encendiendo el equipo, intente corregirla mediante uno o varios de los siguientes procedimientos:
Atencin: Los cambios o modificaciones no aprobados expresamente por VOXX Accessories Corporation podran anular la autoridad del usuario conferida para utilizar este equipo. Vuelva a orientar o cambie de lugar la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte este equipo a un tomacorriente en un circuito diferente al que est conectado el receptor. Consulte al distribuidor o a un tcnico experimentado de radio y televisin para solicitar asistencia. Declaracin sobre la exposicin a radiaciones segn la FCC Este equipo cumple los lmites de exposicin a radiacin de la FCC establecidos para un entorno no controlado. Este dispositivo debe instalarse y operarse con una distancia mnima de 20 cm entre el radiador y su cuerpo. Este transmisor no debe coposicionarse ni usarse conjuntamente con otras antenas u otros transmisores. Informacin Regulatoria de la Industria Canadiense Este dispositivo contiene transmisor (es) / receptor (es) exento (s) de licencia que cumple con el (los) RSS (s) de exencin de licencia de Innovation, Science and Economic Canada. La operacin est sujeta a las siguientes dos condiciones:
(1) Este dispositivo no puede causar interferencia.
(2) Este dispositivo debe aceptar cualquier interferencia, incluidas las interferencias que puedan causar un funcionamiento no deseado del dispositivo. Informacin Regulatoria de la Industria Canadiense CAN ICES-3 (B)/NMB-3 (B) Declaracin IC de exposicin a la radiacin: Este equipo cumple con los lmites de exposicin a la radiacin establecidos por IC para un entorno no controlado. Este dispositivo debe instalarse y operarse con una distancia mnima de 20 cm entre el radiador y su cuerpo. Este transmisor no debe coposicionarse ni usarse conjuntamente con otras antenas u otros transmisores. La marca denominativa y los logotipos de Bluetooth son marcas registradas propiedad de Bluetooth SIG, Inc. y el uso de dichas marcas por parte de VOXX Accessories Corporation se hace bajo licencia. Otras marcas comerciales y nombres de marcas son aquellas de sus respectivos dueos. Imgenes de archivo suministradas por Stuart Duffield, SoundIdeasCom, CreativeDot, tytonsound, jdgehlert, randomplayer, AppleBeamStudios, sounddogs, ProSoundEffects y Pond5. Informacin sobre el Producto Guarde el recibo como prueba de su compra y presntelo para obtener repuestos o solicitar servicio bajo garanta. Anxelo aqu y anote los nmeros de serie y de modelo para referencia en caso necesario. Estos nmeros se encuentran en el producto. Nmero de modelo: ____________________________________________________________________________________________ Fecha de Compra: ______________________________________________________________________________________________ Distribuidor/Direccin/Telfono: _________________________________________________________________________________ PRECAUCIN: Estas instrucciones de servicio son para uso exclusivo del personal de servicio calificado. Para reducir el riesgo de descarga elctrica, no realice reparaciones que no se encuentren en las instrucciones de funcionamiento a menos que usted est calificado para hacerlo. Cuidado y Mantenimiento Siempre utilice un pao suave para limpiar el altavoz y el transmisor. Nunca utilice productos que contengan alcohol u otros solventes ya que estos podran ocasionar daos a la superficie. Tenga precaucin al enchufar los transformadores de potencia en un tomacorriente de CA para evitar el riesgo de choque elctrico. Si se utiliza el altavoz en una terraza o patio, asegrese de almacenarlo en el interior en caso de tormentas para evitar posibles daos. SPKA25 Safety and Warranty 00 El aparato no deber exponerse a goteos ni salpicaduras. No se debe colocar objetos que contengan lquidos como, por ejemplo, floreros, sobre el aparato. Ninguna fuente de flama abierta, tal como velas encendidas, deber colocarse sobre el aparato. ADVERTENCIA: El acoplador del aparato o el enchufe de la red elctrica (MAINS) se utilizan como dispositivo de desconexin; ste deber estar siempre listo para funcionar. No instale este equipo en un espacio confinado como, por ejemplo, una estantera de libros o una unidad similar. Para garantizar una ventilacin adecuada, no cubra las aberturas de ventilacin con artculos como, por ejemplo, peridicos, manteles, cortinas, etc. ADVERTENCIA: Las bateras no deben estar expuestas a calor excesivo, tal como la luz del sol, fuego o fuentes trmicas similares. Se debe tener cuidado siempre que se utilice este aparato en climas moderados. Consulte las indicaciones marcadas en la parte posterior del producto. Importantes Instrucciones de Seguri-
dad 1. Lea estas instrucciones. 2. Guarde estas instrucciones. 3. Preste atencin a todas las advertencias. 4. Acate todas las instrucciones. 5. No use este aparato cerca de agua. 6. Limpie slo con un trapo seco. 7. No obstruya ningn orificio de ventilacin. Instale en conformidad con las instrucciones del fabricante. 8. No instale cerca de fuentes trmicas, como radiadores, reguladores de calefaccin, cocinas y otros aparatos que generen calor (incluidos los amplificadores). 9. No anule el propsito de seguridad que tiene el enchufe polarizado o puesto a tierra. Un enchufe polarizado tiene dos paletas, una ms ancha que la otra. Un enchufe puesto a tierra tiene dos paletas y una clavija de conexin a tierra. La paleta ms ancha o la clavija se incluyen por su seguridad. Si el enchufe proporcionado no encaja en su tomacorriente, solicite a un electricista que reemplace el tomacorriente obsoleto. 10. Proteja el cable de alimentacin de modo que no resulte pisado ni aprisionado, especialmente en el enchufe, la caja de contacto y el punto por donde sale del aparato.
| 1 | User Manual | Users Manual | 2.36 MiB | August 08 2019 |
STAR BURST A L L - IN - O NE P A R T Y SY S T EM QUICK START GUIDE Instructions en franais ..................................... 10 Instrucciones en espaol ....................................19 Step 1: Unpack Make sure the following items came in this package:
Singsation Star Burst All-In-One Party System ACCESSORIES:
+ AC Power Adapter
+ 2 Microphones 2 Step 2: Power the speaker There are two options to power your Singsation Star Burst: using the included AC power adapter or using 8 AA batteries (not included). Back Back To power using the AC power adapter: Attach one end of the AC adapter to the DC IN jack on the back of the Singsation Star Burst. Plug the other end of the adapter into a working outlet or surge protector. To power using AA batteries: Unscrew and remove the battery compartment cover on the back of the speaker. Insert eight (8) AA batteries
(not included) into the speaker following the polarity (+ and -) as diagrammed inside the battery compartment. Replace the battery compartment cover on the back of the speaker and screw it back in place. 3 Right side 8:45PM Wi-Fi Wi-Fi Settings Bluetooth Bluetooth Settings VPN Settings Right side Step 3: Turn on Press and hold the POWER/PAIR button on the right side of the Star Burst to turn it on. The Star Burst plays its startup sound and the indicator above the POWER/PAIR button starts blinking slowly. After 1530 seconds, the Singsation Star Burst announces Pairing and goes to Bluetooth pairing mode to set up with your Bluetooth device. The indicator starts blinking faster. Step 4: Pair + Connect Enable Bluetooth on your smartphone or other Bluetooth device. Make sure the indicator above the Star Bursts POWER/PAIR button is blinking rapidly. (If it isnt, give a short double-press on the POWER/
PAIR button. The Singsation Star Burst announces Pairing.) If youve previously paired your phone or other Bluetooth device with the Singsation Star Burst, it will automatically attempt to reconnect to that device when you switch it on. If you want to pair to a new device, give a short double-press to the POWER/PAIR button. The Singsation Star Burst announces Pairing and its indicator starts blinking. 4 Choose SINGSATION STAR BURST from the pairing options on your Bluetooth device. (If its not in the list, choose Scan from your devices Bluetooth menu.) The Singsation Star Burst announces Device Connected when its finished pairing and connecting to your Bluetooth device. The indicator above the POWER/PAIR button turns solid blue. Note: The process of enabling Bluetooth and connecting varies from device to device. See your devices owners manual for more information and specific instructions. Bluetooth Wireless Connection Tips Make sure the Bluetooth capability of your device is turned on. Make sure theres nothing plugged into the Singsation Star Bursts AUX IN jack when youre trying to use Bluetooth. The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your devices Bluetooth performance, etc. If youre having problems connecting to the speaker, move closer to it. If your device asks you for a password to connect, use 0000. Make sure the volume of your Bluetooth device is turned all the way up (or at least to 75%). 5 Step 5: Sing along!
The Singsation Star Burst comes with 2 microphones you can use to sing along or make announcements!
Left side Right side Top M U S I C V O L U M E TOO QUIET?
Make sure the volume of your Bluetooth device is turned all the way up (or at least to 75%). To sing along: Plug one or both of the provided microphones into the MIC 1 and MIC2 jacks on the left side of the Singsation Star Burst. Start playing music on your Bluetooth device and start singing!
IMPORTANT: Make sure the volume of your Bluetooth device is turned all the way up (or at least to 75%). To adjust the volume of the microphones: Use the MIC/FX VOL+ and MIC/FX VOL buttons on the right side of the Star Burst. To adjust the volume of your music: Use the MUSIC VOLUME knob on the top of Star Burst, or use the volume controls on your Bluetooth device. IMPORTANT: Make sure the volume of your Bluetooth device is turned all the way up (or at least to 75%). Fun with Voice and Sound Effects To use sound effects: Press the SOUND FX button on the Star Burst. A single press plays the same effect again. Press and hold the button or remote key to change effects. To change voice effects: Press the VOICE FX button on the Star Burst. Keep pressing to try all the effects!
6 Using Light Effects The MODE and COLOR buttons on the right side of the Star Burst give you control over its built-in dynamic lighting. The Star Burst offers 10 different light effects, with color variations for many. Right side To cycle through light effects: Press the MODE button on the Star Burst repeatedly. To change the color of a light effect: Press the COLOR button on the Star Burst repeatedly. Note:
Not every light effect offers color variations. To turn light effects off: Press and hold the MODE button on the Star Burst. Demo Mode The Star Burst has a demo mode that shows off all of its lighting options. To activate/deactivate demo mode: Make sure the Star Burst is on and plugged in (not running on battery power). Then press and hold the COLOR button for 10 seconds. 7 Tour of the Singsation Star Burst Star Burst Right Side Bluetooth indicator Bluetooth indicator shows the Bluetooth status of the Singsation Star Burst (solid blue is connected; fast flashing blue means pairing, and slow flashing blue means not connected). This indicator turns solid white when AUX IN is connected. button turns the Star Burst on/off (press POWER/PAIR and hold). A short double-press when the Star Burst is on puts it into pairing mode. MODE button controls the speakers multi-mode lighting. Press to cycle through the light modes. Press and hold to turn lighting off. COLOR button changes the color of the light in light modes where you can select color. SOUND FX button plays one of the available sound effects. Press once to play the current effect. Press and hold to change effects. VOICE FX button cycles through the available voice effects. MIC/FX VOL + and buttons adjust the volume of the MIC 1 and MIC 2 microphones. Star Burst Left Side MIC 1 and MIC 2 jacks let you connect up to two microphones to use with the speaker, for karaoke or announcements. AUX IN jack lets you connect to an external audio device with a 3.5mm audio cable. The speaker switches automatically to this input (and turns Bluetooth off) when you insert the cable. 8 Star Burst Top and Back (Not Shown) MUSIC VOLUME dial (top) adjusts the volume of the music playing. IMPORTANT: Make sure the volume of your Bluetooth device is turned all the way up (or at least to 75%). DC IN jack (back) connects to the provided power cable. Battery compartment lets you power the Star Burst with 8 AA batteries (not included). 90-Day Limited Warranty Voxx Accessories Corporation (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Companys option) without charge for parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. For the location of the nearest warranty station to you, call toll-free to our control office: 1-800-645-4994. This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static or noise, to costs incurred for the installation, removal or reinstallation of the product. The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or by leaving non-rechargeable batteries in the product while plugged into an AC outlet. THE EXTENT OF THE COMPANYS LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANYS LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state/province to state/province. 9 STAR BURST S Y S T M E T O U T - E N - U N A L L - IN - O NE P A R T Y SY S T EM P O U R L A F T E GUIDE DE DMARRAGE RAPIDE English Instructions ..............................................1 Instrucciones en espaol ....................................19 10 tape 1 : Dballage Vrifier que les articles suivants sont inclus dans lemballage :
Singsation Star Burst Systme tout-en-un pour la fte ACCESSOIRES :
+ Adaptateur dalimentation c.a.
+ 2 Microphones DMARRAGE RAPIDE 11 tape 2 : Alimentation du haut-parleur Il y a deux options pour alimenter la Singsation Star Burst : en utilisant ladaptateur dalimentation c.a. inclus ou en utilisant 8 piles AA (non incluses). Arrire de lappareil Alimentation grce ladaptateur dalimentation c.a. : Brancher une extrmit de ladaptateur c.a. dans la prise DC IN (Entre c.c.) larrire de la Singsation Star Burst. Brancher lautre extrmit de ladaptateur sur une prise active ou sur un parasurtenseur. Arrire de lappareil Alimentation grce aux piles AA : Dvisser et enlever le couvercle du compartiment piles situ larrire du haut-parleur. Insrer 8 piles AA (non incluses) dans le haut-parleur en respectant la polarit ( + et - ) comme lindique le schma lintrieur du compartiment piles. Remettre en place le couvercle du compartiment piles situ larrire du haut-parleur et le revisser. 12 Ct droit de lappareil tape 3 : Activer Appuyer sur le bouton POWER/PAIR
(Alimentation/appariement) sur le ct droit de la Star Burst et le maintenir enfonc pour lactiver. La Star Burst diffuse son son de dmarrage et le voyant au-dessus du bouton POWER/
PAIR (Alimentation/appariement) commence clignoter lentement. Aprs 1530 secondes, la Singsation Star Burst annonce Pairing (Appariement) et passe en mode dappariement Bluetooth pour configurer votre appareil Bluetooth. Le voyant commence clignoter plus rapidement. tape 4 : Apparier + connecter Activer la fonction Bluetooth du tlphone intelligent ou de tout autre appareil Bluetooth. Vrifier que le voyant au-dessus du bouton POWER/PAIR clignote rapidement. (Dans le cas contraire, appuyer rapidement deux fois sur le bouton POWER/PAIR (Alimentation/
appariement). La Singsation Star Burst annonce Pairing [Appariement].) Si un tlphone ou tout autre appareil Bluetooth a t appari antrieurement la Singsation Star Burst, elle essaie automatiquement de se reconnecter cet appareil lorsquil est activ. Pour apparier un nouvel appareil, appuyer rapidement deux fois sur le bouton POWER/PAIR (Alimentation/appariement). La Singsation Star Burst annonce Pairing (Appariement) et son voyant commence clignoter. 8:45PM Wi-Fi Wi-Fi Settings Bluetooth Bluetooth Settings VPN Settings Ct droit de lappareil 13 Slectionner SINGSATION STAR BURST dans les options dappariement de votre appareil Bluetooth. (Si elle ne figure pas sur la liste, choisir Balayer/Scan dans le menu Bluetooth de lappareil.) La Singsation Star Burst annonce Device Connected (Appareil connect) lorsque lappariement et la connexion lappareil Bluetooth sont termins. Le voyant au-dessus du bouton POWER/PAIR devient bleu fixe. Remarque : Le processus dactivation Bluetooth et de connexion varie dun appareil lautre. Se reporter au manuel du propritaire de lappareil pour obtenir des informations supplmentaires et des instructions spcifiques. Conseils pour la connexion sans fil Bluetooth Vrifier que la fonction Bluetooth de lappareil est active. Vrifier que rien nest branch sur la prise AUX IN (Entre aux.) de la Singsation Star Burst lors de la tentative dutilisation de Bluetooth. La connexion sans fil Bluetooth dispose dune porte denviron 10 m (33 pi). Cependant, cette porte peut varier en fonction dautres facteurs, tels que lagencement de la pice, le matriau des murs, les obstacles, la performance Bluetooth de lappareil, etc. En cas de problme de connexion avec le haut-parleur, se rapprocher du haut-parleur. Si lappareil demande un mot de passe pour se connecter, utiliser 0000 . Sassurer que le volume de lappareil Bluetooth est rgl au maximum
(ou au moins 75 %). 14 tape 5 : Chanter en mme temps!
La Singsation Star Burst est livre avec 2 microphones qui peuvent tre utiliss pour chanter ou faire des annonces!
Ct gauche de lappareil Ct droit de lappareil Dessus de lappareil M U S I C V O L U M E VOLUME TROP FAIBLE?
Sassurer que le volume de lappareil Bluetooth est rgl au maximum (ou au moins 75 %). Pour chanter en mme temps : Brancher un ou les deux microphones fournis dans les prises MIC 1 et MIC2 sur le ct gauche de la Singsation Star Burst. Dmarrer la lecture de musique sur lappareil Bluetooth et commencer chanter en mme temps! IMPORTANT : Sassurer que le volume de lappareil Bluetooth est rgl au maximum (ou au moins 75 %). Rglage du volume des microphones : Utiliser les boutons MIC/FX VOL+ et MIC/
FX VOL (Volume micro/effets + et -) sur le ct droit de la Star Burst. Rglage du volume de la musique : Utiliser le bouton MUSIC VOLUME (Volume de la musique) sur le dessus de la Star Burst, ou utiliser les commandes du volume de lappareil Bluetooth. IMPORTANT : Sassurer que le volume de lappareil Bluetooth est rgl au maximum (ou au moins 75 %). Du plaisir avec des effets lumineux et sonores Pour utiliser les effets sonores : Appuyer sur le bouton SOUND FX (Effet sonore) de la Star Burst. Une simple pression rejoue le mme effet. Appuyer sur le bouton ou sur une touche de la tlcommande et la maintenir enfonce pour changer les effets. Pour changer les effets vocaux : Appuyer sur le bouton SOUND FX (Effet vocal) de la Star Burst. Continuer appuyer pour essayer tous les effets!
15 Utilisation des effets lumineux Les boutons MODE et COLOR (Couleur) sur le ct droit de la Star Burst permettent de contrler lclairage dynamique intgr. La Star Burst offre 10 effets lumineux diffrents, avec des variations de couleur pour beaucoup dentre eux. Ct droit de lappareil Pour faire dfiler les effets lumineux : Appuyer plusieurs fois sur le bouton MODE de la Star Burst. Pour changer la couleur dun effet lumineux :
Appuyer plusieurs fois sur le bouton COLOR
(Couleur) de la Star Burst. Remarque : Les effets lumineux noffrent pas tous des variations de couleur. Pour dsactiver les effets lumineux : Appuyer le bouton MODE sur la Star Burst et le maintenir enfonc. Mode dmonstration La Star Burst dispose dun mode dmonstration qui prsente toutes les options dclairage. Activation/dsactivation du mode dmonstration : Vrifier que la Star Burst est active et branche sur le secteur (quelle ne fonctionne pas sur piles). Appuyer sur le bouton COLOR (Couleur) et le maintenir enfonc pendant 10 secondes. 16 Voyant Bluetooth Prsentation de la Singsation Star Burst Ct droit de la Star Burst Le voyant BLUETOOTH indique ltat Bluetooth de la Singsation Star Burst (le bleu fixe indique la connexion, le clignotement rapide signifie lappariement et le clignotement lent signifie la connexion en cours). Ce voyant devient blanc fixe lorsque AUX IN (Entre ligne) est connecte.
(Alimentation/appariement) Le bouton POWER/ PAIR allume/teint la Star Burst (appuyer et maintenir enfonc). Une courte double pression lorsque la Star Burst est allume la met en mode dappariement. Le bouton MODE commande lclairage multimode du haut-parleur. Appuyer dessus pour faire dfiler les modes dclairage. Appuyer et maintenir enfonc pour larrter. Le bouton COLOR (Couleur) permet de changer la couleur de la lumire dans les modes o il est possible de slectionner une couleur. Le bouton SOUND FX (Effets sonores) permet de diffuser lun des effets sonores disponibles. Appuyer une fois pour jouer leffet actuel. Appuyer et maintenir enfonc pour changer les effets. Le bouton VOICE FX (Effet vocaux) permet de faire dfiler les effets vocaux disponibles. Les boutons MIC/FX VOL + et (Volume micro/effets) permettent dajuster le volume des microphones MIC1 et MIC2. Ct gauche de la Star Burst Les prises MIC 1 et MIC 2 permettent de connecter jusqu deux microphones utiliser avec le haut-parleur, pour le karaok ou pour des annonces. La prise AUX IN (entre auxiliaire) permet de se connecter un appareil audio externe avec un cble audio de 3,5 mm. Le haut-parleur passe automatiquement cette entre (et dsactive le Bluetooth) quand un cble est insr. 17 Dessus et arrire de la Star Burst (non reprsents) Le bouton rotatif MUSIC VOLUME (dessus) (Volume de la musique) permet dajuster le volume de la musique diffuse. IMPORTANT : Sassurer que le volume de lappareil Bluetooth est rgl au maximum (ou au moins 75 %). La prise DC IN ( larrire) permet la connexion laide du cble secteur fourni. Le compartiment piles permet dalimenter la Star Burst avec 8 piles AA (non incluses). Garantie limite de 90 jours Voxx Accessories Corporation (l Entreprise ) garantit lacheteur au dtail dorigine de ce produit que si, dans les 90 jours suivant la date dachat dorigine, ce produit ou lune quelconque de ses pices, sous rserve dutilisation et de conditions normales, prsente un ou des dfauts de matriau ou de fabrication, ce ou ces dfauts feront lobjet dune rparation ou dun remplacement avec un produit reconditionn ( la discrtion de lEntreprise) sans frais pour les pices et pour la main-duvre. Pour obtenir une rparation ou un remplacement en vertu des termes de la garantie, le produit doit tre livr avec preuve de couverture de garantie (cest--dire une preuve dachat date), une description du ou des dfauts, et les frais de transport pays davance, un centre de rparation agr. Pour connatre lemplacement du centre de rparation le plus proche de chez vous, veuillez appeler sans frais notre bureau de contrle au : 1-800-645-4994. La prsente garantie ne peut pas tre transfre et ne couvre pas les produits achets, rpars ou utiliss lextrieur des tats-Unis ou du Canada. La garantie ne couvre ni llimination de llectricit statique ou du bruit produits de faon externe ni les frais encourus pour linstallation, lenlvement ou la rinstallation du produit. La garantie ne sapplique pas tout produit ou toute pice du produit qui selon lavis de lEntreprise, a subi des dommages suite une altration, une installation incorrecte, une manipulation incorrecte, une mauvaise utilisation, une ngligence, un accident ou une exposition de lhumidit. Cette garantie ne sapplique pas des dommages causs par un adaptateur c.a. qui nest pas fourni avec le produit ou lorsque les piles non rechargeables ont t laisses dans le produit alors quil tait branch sur une prise secteur (c.a.). LTENDUE DE LA RESPONSABILIT DE LENTREPRISE EN VERTU DE LA PRSENTE GARANTIE EST LIMITE LA RPARATION OU AU REMPLACEMENT INDIQUS CI-DESSUS ET, EN AUCUN CAS, LA RESPONSABILIT DE LENTREPRISE NE PEUT DPASSER LE PRIX DACHAT PAY PAR LACHETEUR POUR LE PRODUIT. La prsente garantie remplace toute autre garantie ou responsabilit expresse. TOUTE GARANTIE IMPLICITE, INCLUANT TOUTE GARANTIE IMPLICITE DE QUALIT MARCHANDE OU DADAPTATION UN USAGE PARTICULIER, EST LIMITE LA DURE DE LA PRSENTE GARANTIE. TOUTE ACTION POUR VIOLATION DE TOUTE GARANTIE MENTIONNE DANS LES PRSENTES, INCLUANT TOUTE GARANTIE IMPLICITE, DOIT TRE PRSENTE DANS LES 24 MOIS SUIVANT LA DATE DE LACHAT DORIGINE. EN AUCUN CAS LENTREPRISE NE PEUT TRE TENUE RESPONSABLE DUN QUELCONQUE DOMMAGE CONSCUTIF OU INDIRECT. Aucune personne ni aucun reprsentant nest autoris assumer pour lEntreprise une quelconque responsabilit autre que celle exprime dans les prsentes en relation avec la vente de ce produit. Certaines juridictions nautorisent pas de limites quant la dure dune garantie implicite ou quant lexclusion ou la limitation de dommages indirects ou conscutifs; les limitations et exclusions indiques dans les prsentes pourraient donc ne pas sappliquer votre cas. La prsente garantie vous donne des droits lgaux spcifiques et vous pourriez galement bnficier dautres droits qui varient selon ltat, de province tat, selon la province. 18 STAR BURST S I S T E M A D E F I E S T A S A L L - IN - O NE P A R T Y SY S T EM I N T E G R A L GUA DE INICIO RPIDO English Instructions ..............................................1 Instructions en franais ..................................... 10 19 Paso 1: Desempaque Asegrese que el paquete contenga estos artculos:
Singsation Star Burst Sistema de fiestas integral ACCESORIOS:
+ Adaptador de corriente de CA
+ 2 micrfonos 20 Paso 2: Alimentacin del altavoz Hay dos opciones para alimentar el Singsation Star Burst: utilizar el adaptador de corriente de CA incluido o utilizar 8 bateras tipo AA (no se incluyen). Parte posterior Para usar con el adaptador de corriente de CA:
conecte un extremo del adaptador de CA en el conector DC IN situado en la parte posterior del Singsation Star Burst. Conecte el otro extremo del adaptador en un tomacorriente o un protector de sobrecarga. Parte posterior Para usar con las bateras AA: desatornille y retire la tapa del compartimiento de las bateras en la parte trasera del altavoz. Inserte ocho
(8) bateras AA (no se incluyen) en el altavoz respetando la polaridad (+, ) segn se ilustra en el diagrama dentro del compartimiento de las bateras. Vuelva a colocar la tapa del compartimiento de las bateras en la parte posterior del altavoz y atornllela en su lugar. 21 Lado derecho 8:45PM Wi-Fi Wi-Fi Settings Bluetooth Bluetooth Settings VPN Settings Lado derecho Paso 3: Encindalo Oprima y no suelte el botn POWER/PAIR en el lado derecho del Star Burst para encenderlo. El Singsation Star Burst reproduce su sonido de inicializacin, y el indicador encima del botn POWER/PAIR comienza a parpadear lentamente. Despus de 15 a 30 segundos, el Singsation Star Burst emite el mensaje Pairing (Sincronizando) y pasa al modo de sincronizacin Bluetooth para configurarse con su dispositivo Bluetooth. El indicador comienza a parpadear ms rpido. Paso 4: Sincronice + Conecte Active la funcin Bluetooth en su telfono inteligente u otro dispositivo Bluetooth. Asegrese de que el indicador encima del botn POWER/PAIR del Star Burst est parpadeando rpidamente (si no lo est, oprima brevemente el botn POWER/PAIR dos veces. El Singsation Star Burst emite el mensaje Pairing
[Sincronizando]). Si anteriormente sincroniz su telfono u otro dispositivo Bluetooth con el Singsation Star Burst, ste intentar automticamente reconectarse con ese dispositivo cuando lo encienda. Si desea sincronizar con un nuevo dispositivo, oprima brevemente el botn POWER/PAIR dos veces. El Singsation Star Burst anuncia Pairing
(Sincronizando) y su indicador empieza a parpadear. 22 Seleccione SINGSATION STAR BURST entre las opciones de sincronizacin que le ofrece su dispositivo Bluetooth (si no aparece en la lista, seleccione Scan (Explorar) en el men de Bluetooth de su dispositivo). El Singsation Star Burst emite el mensaje Device Connected (Dispositivo conectado) cuando termina de sincronizar y conectarse con su dispositivo Bluetooth. El indicador encima del botn POWER/PAIR se enciende de color azul continuo. Aviso: El proceso de activacin de la funcin Bluetooth y de conexin vara segn el dispositivo. Consulte el manual del usuario del dispositivo para obtener informacin adicional e instrucciones especficas. Consejos para la conexin inalmbrica Bluetooth Asegrese que est activada la funcin Bluetooth de su dispositivo. Asegrese que no haya nada acoplado al conector AUX IN del Singsation Star Burst cuando est intentando utilizar Bluetooth. La conexin inalmbrica Bluetooth tiene un alcance eficaz de aproximadamente 33 pies
(10 metros). Sin embargo, este alcance puede variar dependiendo de otros factores, tales como el diseo de la habitacin, el material de las paredes, los obstculos, el desempeo de Bluetooth de su dispositivo, etc. Si tiene problemas para conectarse con el altavoz, acrquese ms. Si su dispositivo le solicita un cdigo para conectarse, utilice 0000. Asegrese de subir completamente (o al menos hasta el 75 %) el volumen de su dispositivo Bluetooth. 23 Paso 5: A cantar!
El Singsation Star Burst viene con un micrfono que usted puede utilizar para cantar o hacer anuncios!
Lado izquierdo Lado derecho Parte superior M U S I C V O L U M E DEMASIADO BAJO?
Asegrese de subir completamente (o al menos hasta el 75 %) el volumen de su dispositivo Bluetooth. Para cantar al comps de su msica: Enchufe uno o los dos micrfonos suministrados en los conectores MIC 1 y MIC 2 situados en el lado izquierdo del Singsation Star Burst. Ponga msica en su dispositivo Bluetooth y empiece a cantar! IMPORTANTE: Asegrese de subir completamente (o al menos hasta el 75
%) el volumen de su dispositivo Bluetooth. Para ajustar el volumen de los micrfonos: Utiice los botones MIC/FX VOL+ y MIC/FX VOL en el lado derecho del Star Burst. Para ajustar el volumen de su msica: Utilice el mando MUSIC VOLUME en la parte superior del Star Burst o los controles de volumen en su dispositivo Bluetooth. IMPORTANTE: Asegrese de subir completamente (o al menos hasta el 75 %) el volumen de su dispositivo Bluetooth. Divirtase con efectos de sonido y voz Para utilizar los efectos de sonido: Oprima el botn SOUND FX en el Star Burst. Oprima una vez para reproducir el mismo efecto otra vez. Oprima y no suelte el botn o la tecla del control remoto para cambiar los efectos. Para cambiar los efectos de voz: Oprima el botn VOICE FX en el Star Burst. Contine oprimiendo para probar todos los efectos!
24 Uso de los efectos de iluminacin Los botones MODE y COLOR en el lado derecho del Star Burst le dan control sobre su iluminacin dinmica incorporada. El Star Burst ofrece 10 efectos de iluminacin diferentes, con variaciones de color para muchos de ellos. Lado derecho Para avanzar a travs de los efectos de iluminacin: Oprima repetidamente el botn MODE en el Star Burst. Para cambiar el color de un efecto de iluminacin: Oprima repetidamente el botn COLOR en el Star Burst. Aviso: No todos los efectos de iluminacin ofrecen variaciones de color. Para apagar los efectos de iluminacin: Oprima y no suelte el botn MODE en el Star Burst. Modo de demostracin El Star Burst tiene un modo de demostracin que muestra todas las opciones de iluminacin. Para activar o desactivar el modo de demostracin: Asegrese de que el Star Burst est encendido y enchufado (que no est funcionando con alimentacin de las bateras). A continuacin, oprima y no suelte el botn COLOR durante 10 segundos. 25 Indicador Bluetooth
: enciende y apaga el Star Burst Recorrido del Singsation Star Burst Lado derecho del Star Burst Indicador Bluetooth: muestra el estado Bluetooth del Singsation Star Burst (azul continuo es conectado;
azul parpadeando rpido significa sincronizando y azul parpadeando lento significa desconectado). Este indicador cambia a color blanco continuo cuando AUX IN est conectado. Botn POWER/PAIR
(oprima y no suelte). Si este botn se oprime brevemente dos veces cuando el Star Burst est encendido, se activa el modo de sincronizacin. Botn MODE: controla la iluminacin multimodo del altavoz. Oprima para avanzar a travs de los modos de iluminacin. Oprima y no suelte para apaga la iluminacin. Botn COLOR: cambia el color de la luz en los modos de iluminacin donde usted puede seleccionar el color. Botn SOUND FX: reproduce uno de los efectos de sonido disponibles. Oprima una vez para reproducir el efecto actual. Oprima y no suelte para cambiar de efecto. Botn VOICE FX: cicla a travs de los efectos de voz disponibles. Botones MIC/FX VOL + y : ajusta el volumen de los micrfonos MIC 1 y MIC 2. Lado izquierdo del Star Burst Conectores MIC 1 y MIC 2: le permiten conectar hasta dos micrfonos para usar con el altavoz, para karaoke o para hacer anuncios pblicos. Conector AUX IN: le permite conectar a un dispositivo de audio externo utilizando un cable de audio de 3.5 mm. El altavoz cambia automticamente a esta entrada (y apaga Bluetooth) cuando se introduce el cable. 26 Parte superior y posterior del Star Burst (no se muestra) Selector MUSIC VOLUME (parte superior): ajusta el volumen de la msica que se est reproduciendo. IMPORTANTE: Asegrese de subir completamente (o al menos hasta el 75 %) el volumen de su dispositivo Bluetooth. Conector DC IN (parte posterior): conecta al cable de alimentacin suministrado. Compartimiento de las bateras: le permite utilizar el Star Burst con 8 bateras AA
(no se incluyen). Garanta limitada de 90 das Voxx Accessories Corporation (la Compaa) le garantiza al comprador original de este producto que, si se demostrara que este producto o cualquiera de sus piezas, sometidos a condiciones y uso normales, presentan defectos de materiales o fabricacin en el lapso de 90 das a partir de la fecha de compra original, se repararn esos defectos o se reemplazar el producto por uno nuevo o renovado (a eleccin de la Compaa) sin costo por concepto de piezas y trabajo de reparacin. Para recibir los servicios de reparacin o reemplazo de acuerdo con los trminos de la garanta, el producto deber enviarse, habiendo pagado el transporte por adelantado, a un centro de garanta autorizado, acompaado de una prueba de cobertura de garanta (por ejemplo, la factura de venta con fecha) y la especificacin de los defectos. Para ubicar el centro de garanta ms cercano a usted, srvase llamar libre de cargo a nuestra oficina de control, al telfono: 1-800-645-4994. Esta garanta no es transferible y no cubre productos que se hayan adquirido, hayan recibido servicio tcnico o se hayan usado fuera de Estados Unidos o Canad. Esta garanta no incluye la eliminacin de esttica o ruidos generados externamente, ni los costos incurridos en la instalacin, remocin o reinstalacin del producto. La garanta no se aplica a ningn producto o pieza que, en opinin de la compaa, haya sufrido daos debido a alteraciones, instalacin inadecuada, maltrato, abuso, negligencia, accidente o exposicin a la humedad. Esta garanta no aplica a daos ocasionados por un adaptador de CA que no haya sido suministrado con el producto, o por dejar instaladas bateras no recargables en el producto mientras la unidad se encontraba enchufada a un tomacorriente de CA. EL ALCANCE DE LA RESPONSABILIDAD DE LA COMPAA DE ACUERDO CON ESTA GARANTA SE LIMITA A LA REPARACIN O EL REEMPLAZO DESCRITOS ANTERIORMENTE Y, EN NINGN CASO, LA RESPONSABILIDAD DE LA COMPAA SUPERAR EL PRECIO DE COMPRA QUE HAYA PAGADO EL COMPRADOR POR ESTE PRODUCTO. Esta garanta reemplaza cualesquiera otras responsabilidades o garantas expresas. CUALESQUIERA GARANTAS IMPLCITAS, INCLUIDA CUALQUIER GARANTA IMPLCITA DE COMERCIABILIDAD O ADAPTABILIDAD PARA UN PROPSITO EN PARTICULAR, SE LIMITARN A LA DURACIN DE ESTA GARANTA. TODA ACCIN POR EL INCUMPLIMIENTO DE CUALQUIER GARANTA CONFORME A LOS TRMINOS AQU ESTABLECIDOS, INCLUIDA TODA GARANTA IMPLCITA, DEBER EMPRENDERSE EN UN LAPSO DE 24 MESES A PARTIR DE LA FECHA DE COMPRA ORIGINAL. EN NINGN CASO LA COMPAA SER RESPONSABLE POR DAOS EMERGENTES O INCIDENTALES. Ninguna persona ni representante estn autorizados para asumir en nombre de la Compaa ninguna responsabilidad, salvo la aqu expresada en relacin con la venta de este producto. Algunos estados/provincias no permiten limitaciones sobre la duracin de una garanta implcita o la exclusin o la limitacin de daos incidentales o emergentes, de modo que es posible que las limitaciones o exclusiones anteriores no se apliquen en su caso. Esta garanta le confiere derechos legales especficos, y es posible adems que le asistan otros derechos que pueden variar segn el estado o la provincia. 27 SPKA25 QSG 03
| 1 | Internal Photos | Internal Photos | 2.95 MiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 10 Internal Photos for SZEM1907016369CR FCC ID: VIXSPKA25 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 10 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 8 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 9 of 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 10 of 10
| 1 | External Photos | External Photos | 1.06 MiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM1907016369CR FCC ID: VIXSPKA25 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 EUT Constructional Details 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5
| 1 | Label | ID Label/Location Info | 841.18 KiB | August 08 2019 |
Karaoke System Model: SPKA25 Input: 9V 1A FCC ID: VIXSPKA25 IC: 21578-SPKA25 or 8 x 1.5V AA batteries Made in China CAN ICES-3 (B)/NMB-3 (B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SN Label 28*5mm Embossed (Tooling insert) SPKA25 A19030 Rating
| 1 | Authorization Letter | Cover Letter(s) | 391.62 KiB | August 08 2019 |
Date: Jul 9, 2019 TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: VIXSPKA25 To whom it may concern:
We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Voxx Accessories Corp. This authorization is valid until further written notice from the applicant. Print Name: Paul Tinaphong Signature:
On behalf of Company: Voxx Accessories Corp. Telephone: (317) 2187301 E-mail: PTinaphong@voxxintl.com Title: Senior Vice President
| 1 | Confidentiality Letter | Cover Letter(s) | 625.26 KiB | August 08 2019 |
3502 Woodview Trace, Suite 220, Indianapolis, IN 46268 Confidentiality Request regarding application for FCC ID: VIXSPKA25 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States To:
From: Voxx Accessories Corp. Regarding:
LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely Print Name: Paul Tinaphong Signature:
On behalf of Company: Voxx Accessories Corp. Telephone: (317) 2187301 E-mail: PTinaphong@voxxintl.com Title: Senior Vice President
| 1 | RF Exposure Report | RF Exposure Info | 327.86 KiB | August 08 2019 |
1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636903 Page:
1 of 7 Cover page SAR Evaluation Report Application No.:
SZEM1907016369CR Applicant:
Voxx Accessories Corp. Address of Applicant:
3502 Woodview Trace suite 220, Indianapolis, Indiana 46268, United States Manufacturer:
Shenzhen Great Power Innovation and Technology Enterpriese Co., Ltd Address of Manufacturer:
Building E, Xinxulong Industral Area, Kukeng Village, Guanlan Town, Longhua New District, Shenzhen, China Factory:
Shenzhen Great Power Innovation and Technology Enterpriese Co., Ltd Address of Factory:
Building E, Xinxulong Industral Area, Kukeng Village, Guanlan Town, Longhua New District, Shenzhen, China Equipment Under Test (EUT):
EUT Name:
Model No.:
Trade mark:
FCC ID:
Standards:
Karaoke System SPKA25 SINGSATION VIXSPKA25 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt:
2019-07-15 Date of Test:
Date of Issue:
Test Result :
2019-07-17 to 2019-07-29 2019-07-31 PASS*
*
In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager 2 Version SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636903 Page: 2 of 7 Version Chapter Date Modifier Remark Revision Record 01 2019-07-31 Original Authorized for issue by:
Leo Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636903 Page: 3 of 7 3 Contents Page 1 2 3 4 COVER PAGE .............................................................................................................................................. 1 VERSION ...................................................................................................................................................... 2 CONTENTS .................................................................................................................................................. 3 GENERAL INFORMATION .......................................................................................................................... 4 4.1 4.2 4.3 4.4 4.5 4.6 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 TEST LOCATION ...................................................................................................................................... 5 TEST FACILITY ........................................................................................................................................ 5 DEVIATION FROM STANDARDS ................................................................................................................. 6 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 6 5 SAR EVALUATION ...................................................................................................................................... 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 7 5.1.1 Standard Requirement ..................................................................................................................... 7 5.1.2 Limits ................................................................................................................................................ 7 5.1.3 EUT RF Exposure ............................................................................................................................ 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636903 Page: 4 of 7 4 General Information 4.1 General Description of EUT Power supply:
Cable:
DC 9V Adapter Model: HX12H-0901000-AU-001 Input:AC100-240V 50/60Hz 0.5A Max Output: DC 9.0V 1.0A 12V DC (1.5Vx8"AA" Size Batteries) DC cable: 190cm unshielded Microphone cable: 210cm unshielded Operation Frequency:
2402MHz to 2480MHz Bluetooth Version:
V5.0 Classic Spectrum Spread Technology:
Frequency Hopping Spread Spectrum(FHSS) Modulation Type:
GFSK, /4DQPSK, 8DPSK Number of Channels:
79 Channel Spacing:
1MHz Antenna Type:
PCB Antenna Antenna Gain:
0dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636903 Page: 5 of 7 4.2 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations:
CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. FCC Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636903 Page: 6 of 7 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636903 Page: 7 of 7 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 5.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]
[f(GHz)] 3.0 for 1-g SAR and 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 5.1.3 EUT RF Exposure The Max. power (including tune-up tolerance) is 2.89 2.89 dBm logarithmic terms convert to numeric result is nearly 1.95 mW According to the formula. calculate the test exclusion thresholds:
dBm on the lowest channel 2.402 GHz (*) General RF Exposure
. , ,
. , General RF Exposure = (1.95 mW / 5 mm) x 2.402 GHz = 0.60 SAR requirement:
S = 3.0
(1) < (2) So the SAR report is not required.
(1)
(2)
(*) Max. power refer to Report No.:SZEM190701636902
- End of the Report -
| 1 | Test Report | Test Report | 2.56 MiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page:
1 of 97 TEST REPORT Application No.:
SZEM1907016369CR Applicant:
Voxx Accessories Corp. Address of Applicant:
3502 Woodview Trace suite 220, Indianapolis, Indiana 46268, United States Manufacturer:
Shenzhen Great Power Innovation and Technology Enterpriese Co., Ltd Address of Manufacturer:
Building E, Xinxulong Industral Area, Kukeng Village, Guanlan Town, Longhua New District, Shenzhen, China Factory:
Shenzhen Great Power Innovation and Technology Enterpriese Co., Ltd Address of Factory:
Building E, Xinxulong Industral Area, Kukeng Village, Guanlan Town, Longhua New District, Shenzhen, China Equipment Under Test (EUT):
EUT Name:
Model No.:
Trade mark:
FCC ID:
Standard(s) :
Date of Receipt:
Date of Test:
Date of Issue:
Test Result:
Karaoke System SPKA25 SINGSATION VIXSPKA25 47 CFR Part 15, Subpart C 15.247 2019-07-15 2019-07-17 to 2019-07-29 2019-07-31 Pass*
* In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 2 of 97 Version Chapter Date Modifier Remark Revision Record 01 2019-07-31 Original Authorized for issue by:
Leo Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 3 of 97 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 Radio Spectrum Matter Part N/A N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Item Standard Method Requirement Result Conducted Emissions at AC Power Line
(150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 6.2 C 15.207 Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 7.8.5 C 15.247(b)(1) 20dB Bandwidth Carrier Frequencies Separation Hopping Channel Number Dwell Time 47 CFR Part 15, Subpart C 15.247 47 CFR Part 15, Subpart C 15.247 47 CFR Part 15, Subpart C 15.247 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 7.8.7 C 15.247(a)(1) ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 7.8.2 C 15.247a(1) ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 7.8.3 C 15.247a(1)(iii) ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 7.8.4 C 15.247a(1)(iii) Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 7.8.6 C 15.247(d) Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 7.8.8 C 15.247(d) Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 6.10.5 C 15.205 & 15.209 Pass Pass Pass Pass Pass Pass Pass Pass Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 4 of 97 3 Contents 1 COVER PAGE ............................................................................................................................................ 1 Page 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 4.2 4.3 4.4 4.5 4.6 4.7 DETAILS OF E.U.T. .............................................................................................................................. 6 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 TEST LOCATION .................................................................................................................................... 7 TEST FACILITY ...................................................................................................................................... 7 DEVIATION FROM STANDARDS ............................................................................................................... 7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 13 6.1 6.2 ANTENNA REQUIREMENT .................................................................................................................... 13 6.1.1 Test Requirement: ....................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................... 13 OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE ........ 14 6.2.1 Test Requirement: ....................................................................................................................... 14 6.2.2 Conclusion ................................................................................................................................... 14 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 16 7.1 7.2 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ........................................................... 16 7.1.1 E.U.T. Operation .......................................................................................................................... 17 7.1.2 Test Setup Diagram ..................................................................................................................... 17 7.1.3 Measurement Procedure and Data............................................................................................. 17 CONDUCTED PEAK OUTPUT POWER .................................................................................................... 20 7.2.1 E.U.T. Operation .......................................................................................................................... 21 7.2.2 Test Setup Diagram ..................................................................................................................... 21 7.2.3 Measurement Procedure and Data............................................................................................. 21 20DB BANDWIDTH .............................................................................................................................. 22 7.3.1 E.U.T. Operation .......................................................................................................................... 22 7.3.2 Test Setup Diagram ..................................................................................................................... 22 7.3.3 Measurement Procedure and Data............................................................................................. 22 CARRIER FREQUENCIES SEPARATION .................................................................................................. 23 7.4.1 E.U.T. Operation .......................................................................................................................... 24 7.4.2 Test Setup Diagram ..................................................................................................................... 24 7.4.3 Measurement Procedure and Data............................................................................................. 24 HOPPING CHANNEL NUMBER............................................................................................................... 25 7.5.1 E.U.T. Operation .......................................................................................................................... 26 7.5.2 Test Setup Diagram ..................................................................................................................... 26 7.5.3 Measurement Procedure and Data............................................................................................. 26 DWELL TIME ....................................................................................................................................... 27 7.3 7.4 7.5 7.6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 5 of 97 7.8 7.7 7.6.1 E.U.T. Operation .......................................................................................................................... 28 7.6.2 Test Setup Diagram ..................................................................................................................... 28 7.6.3 Measurement Procedure and Data............................................................................................. 28 CONDUCTED BAND EDGES MEASUREMENT .......................................................................................... 29 7.7.1 E.U.T. Operation .......................................................................................................................... 30 7.7.2 Test Setup Diagram ..................................................................................................................... 30 7.7.3 Measurement Procedure and Data............................................................................................. 30 CONDUCTED SPURIOUS EMISSIONS ..................................................................................................... 31 7.8.1 E.U.T. Operation .......................................................................................................................... 32 7.8.2 Test Setup Diagram ..................................................................................................................... 32 7.8.3 Measurement Procedure and Data............................................................................................. 32 RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS .............................................................. 33 7.9.1 E.U.T. Operation .......................................................................................................................... 34 7.9.2 Test Setup Diagram ..................................................................................................................... 34 7.9.3 Measurement Procedure and Data............................................................................................. 35 7.10 RADIATED SPURIOUS EMISSIONS ........................................................................................................ 40 E.U.T. Operation ...................................................................................................................... 41 7.10.1 Test Setup Diagram ................................................................................................................. 41 7.10.2 7.10.3 Measurement Procedure and Data ........................................................................................ 42 7.9 8 PHOTOGRAPHS ...................................................................................................................................... 51 8.1 8.2 TEST SETUP ....................................................................................................................................... 51 EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS) ................................................................................. 51 9 APPENDIX ................................................................................................................................................ 52 9.1 APPENDIX 15.247 ........................................................................................................................ 52-97 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 6 of 97 4 General Information 4.1 Details of E.U.T. Power supply:
DC 9V Adapter Model: HX12H-0901000-AU-001 Input:AC100-240V 50/60Hz 0.5A Max Output: DC 9.0V 1.0A 12V DC (1.5Vx8"AA" Size Batteries) Cable:
DC cable: 190cm unshielded Microphone cable: 210cm unshielded Operation Frequency:
2402MHz to 2480MHz Bluetooth Version:
V5.0 Classic Spectrum Spread Technology:
Frequency Hopping Spread Spectrum(FHSS) Modulation Type:
GFSK, /4DQPSK, 8DPSK Number of Channels:
79 Channel Spacing:
1MHz Antenna Type:
Antenna Gain:
PCB Antenna 0dBi 4.2 Description of Support Units The EUT has been tested as an independent unit. 4.3 Measurement Uncertainty No. 1 2 3 4 5 6 7 8 9 10 Item Measurement Uncertainty Radio Frequency Occupied Bandwidth Conduction emission RF conducted power Conducted Spurious emissions Radiated Spurious emission test Temperature test Humidity test Supply voltages Time 7.25 x 10-8 3%
3.0dB (150kHz to 30MHz) 0.75dB 0.75dB 4.5dB (Below 1GHz) 4.8dB (Above 1GHz) 1C 3%
1.5%
3%
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 7 of 97 4.4 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 No tests were sub-contracted. Fax: +86 755 2671 0594 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations:
CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. FCC Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 8 of 97 5 Equipment List Conducted Emissions at AC Power Line (150kHz-30MHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room ZhongYu Electron GB-88 SEM001-06 2019-06-13 2024-06-12 Measurement Software AUDIX Coaxial Cable SGS e3 V8.2014-6-
27 N/A N/A N/A N/A SEM024-01 2019-07-11 2020-07-10 LISN LISN Rohde & Schwarz ENV216 SEM007-01 2018-09-25 2019-09-24 ETS-LINDGREN 3816/2 SEM007-02 2019-04-01 2020-03-31 EMI Test Receiver Rohde & Schwarz ESCI SEM004-02 2019-04-01 2020-03-31 Conducted Peak Output Power Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz Electric and Magnetic Field Analyzer Electric Field Probe
(100KHz-3GHz) Narda WANDEL &
GOLTERMANN NRVS NBM-
550/EHP-50F SEM014-02 2018-09-25 2019-09-24 EMC2143 2018-02-07 2020-02-06 EMR-20 EMC0907 2019-05-21 2020-05-20 EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 20dB Bandwidth Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz Electric and Magnetic Field Analyzer Narda NRVS NBM-
550/EHP-50F SEM014-02 2018-09-25 2019-09-24 EMC2143 2018-02-07 2020-02-06 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 9 of 97 Electric Field Probe
(100KHz-3GHz) WANDEL &
GOLTERMANN EMR-20 EMC0907 2019-05-21 2020-05-20 EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Carrier Frequencies Separation Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz Electric and Magnetic Field Analyzer Electric Field Probe
(100KHz-3GHz) Narda WANDEL &
GOLTERMANN NRVS NBM-
550/EHP-50F SEM014-02 2018-09-25 2019-09-24 EMC2143 2018-02-07 2020-02-06 EMR-20 EMC0907 2019-05-21 2020-05-20 EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Hopping Channel Number Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz Electric and Magnetic Field Analyzer Electric Field Probe
(100KHz-3GHz) Narda WANDEL &
GOLTERMANN NRVS NBM-
550/EHP-50F SEM014-02 2018-09-25 2019-09-24 EMC2143 2018-02-07 2020-02-06 EMR-20 EMC0907 2019-05-21 2020-05-20 EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Dwell Time SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 10 of 97 Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz Electric and Magnetic Field Analyzer Electric Field Probe
(100KHz-3GHz) Narda WANDEL &
GOLTERMANN NRVS NBM-
550/EHP-50F SEM014-02 2018-09-25 2019-09-24 EMC2143 2018-02-07 2020-02-06 EMR-20 EMC0907 2019-05-21 2020-05-20 EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Conducted Band Edges Measurement Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz Electric and Magnetic Field Analyzer Electric Field Probe
(100KHz-3GHz) Narda WANDEL &
GOLTERMANN NRVS NBM-
550/EHP-50F SEM014-02 2018-09-25 2019-09-24 EMC2143 2018-02-07 2020-02-06 EMR-20 EMC0907 2019-05-21 2020-05-20 EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Conducted Spurious Emissions Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 11 of 97 Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz Electric and Magnetic Field Analyzer Electric Field Probe
(100KHz-3GHz) Narda WANDEL &
GOLTERMANN NRVS NBM-
550/EHP-50F SEM014-02 2018-09-25 2019-09-24 EMC2143 2018-02-07 2020-02-06 EMR-20 EMC0907 2019-05-21 2020-05-20 EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07 Radiated Emissions which fall in the restricted bands Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic Chamber AUDIX N/A SEM001-02 2018-03-13 2021-03-12 Measurement Software AUDIX Coaxial Cable SGS EXA Spectrum Analyzer AgilentTechnologies Inc e3 V8.2014-6-
27 N/A N/A N/A N/A SEM026-01 2019-07-11 2020-07-10 N9010A SEM004-12 2019-04-12 2020-04-11 Horn Antenna
(1-18GHz) Horn Antenna
(15GHz-40GHz) Pre-Amplifier
(0.1-26.5GHz) Rohde & Schwarz HF907 SEM003-07 2018-04-13 2021-04-12 Schwarzbeck BBHA 9170 SEM003-15 2017-10-17 2020-10-16 Compliance Directions Systems PAP-0126 SEM004-11 2018-11-12 2019-11-11 Inc. Pre-amplifier(18-26GHz) Rohde & Schwarz CH14-H052 SEM005-17 2019-04-01 2020-03-31 Pre-amplifier
(26GHz-40GHz) Compliance Directions Systems PAP-2640-50 SEM005-08 2019-04-01 2020-03-31 Inc. DC Power Supply Zhao Xin RXN-305D SEM011-02 2018-09-25 2019-09-24 Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 Radiated Spurious Emissions (Above 1GHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic Chamber AUDIX N/A SEM001-02 2018-03-13 2021-03-12 Measurement Software AUDIX Coaxial Cable SGS EXA Spectrum Analyzer AgilentTechnologies Inc e3 V8.2014-6-
27 N/A N/A N/A N/A SEM026-01 2019-07-11 2020-07-10 N9010A SEM004-12 2019-04-12 2020-04-11 Horn Antenna
(1-18GHz) Rohde & Schwarz HF907 SEM003-07 2018-04-13 2021-04-12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 12 of 97 Horn Antenna
(15GHz-40GHz) Pre-Amplifier
(0.1-26.5GHz) Schwarzbeck BBHA 9170 SEM003-15 2017-10-17 2020-10-16 Compliance Directions Systems PAP-0126 SEM004-11 2018-11-12 2019-11-11 Inc. Pre-amplifier(18-26GHz) Rohde & Schwarz CH14-H052 SEM005-17 2019-04-01 2020-03-31 Pre-amplifier
(26GHz-40GHz) Compliance Directions Systems PAP-2640-50 SEM005-08 2019-04-01 2020-03-31 Inc. DC Power Supply Zhao Xin RXN-305D SEM011-02 2018-09-25 2019-09-24 Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 Radiated Emissions (30MHz-1GHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic Chamber ETS-LINDGREN N/A SEM001-01 2017-08-05 2020-08-04 Measurement Software AUDIX Coaxial Cable SGS e3 V8.2014-6-
27 N/A N/A N/A N/A SEM025-01 2019-07-11 2020-07-10 EMI Test Receiver Agilent Technologies N9038A SEM004-05 2018-09-25 2019-09-24 BiConiLog Antenna
(26-3000MHz) Pre-amplifier
(0.1-1300MHz) ETS-LINDGREN 3142C SEM003-01 2017-06-27 2020-06-26 Agilent Technologies 8447D SEM005-01 2019-04-01 2020-03-31 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Humidity/ Temperature Indicator Humidity/ Temperature Indicator Humidity/ Temperature Indicator Barometer Shanghai Meteorological Industry Factory Shanghai Meteorological Industry Factory ZJ1-2B SEM002-03 2018-09-27 2019-09-26 ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Mingle N/A SEM002-08 2018-09-27 2019-09-26 Changchun Meteorological Industry Factory DYM3 SEM002-01 2019-04-04 2020-04-03 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 13 of 97 6 Radio Spectrum Technical Requirement 6.1 Antenna Requirement 6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) 6.1.2 Conclusion Standard Requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1),
(b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of the antenna is 0dBi. Antenna location: Refer to Appendix(Internal photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 14 of 97 6.2 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 6.2.1 Test Requirement:
47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) 6.2.2 Conclusion Standard Requirement:
The system shall hop to channel frequencies that are selected at the system hopping rate from a Pseudorandom ordered list of hopping frequencies. Each frequency must be used equally on the average by each transmitter. The system receivers shall have input bandwidths that match the hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in synchronization with the transmitted signals. Frequency hopping spread spectrum systems are not required to employ all available hopping channels during each transmission. However, the system, consisting of both the transmitter and the receiver, must be designed to comply with all of the regulations in this section should the transmitter be presented with a continuous data (or information) stream. In addition, a system employing short transmission bursts must comply with the definition of a frequency hopping system and must distribute its transmissions over the minimum number of hopping channels specified in this section. The incorporation of intelligence within a frequency hopping spread spectrum system that permits the system to recognize other users within the spectrum band so that it individually and independently chooses and adapts its hopsets to avoid hopping on occupied channels is permitted. The coordination of frequency hopping systems in any other manner for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not permitted. Compliance for section 15.247(a)(1):
According to Technical Specification, the pseudorandom sequence may be generated in a nine-stage shift register whose 5th and 9th stage outputs are added in a modulo-two addition stage. And the result is fed back to the input of the first stage. The sequence begins with the first ONE of 9 consecutive ONEs; i.e. the shift register is initialized with nine ones.
> Number of shift register stages: 9
> Length of pseudo-random sequence: 29 -1 = 511 bits
> Longest sequence of zeros: 8 (non-inverted signal) Linear Feedback Shift Register for Generation of the PRBS sequence An example of Pseudorandom Frequency Hopping Sequence as follow:
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 15 of 97 Each frequency used equally on the average by each transmitter. According to Technical Specification, the receivers are designed to have input and IF bandwidths that match the hopping channel bandwidths of any transmitters and shift frequencies in synchronization with the transmitted signals. Compliance for section 15.247(g):
According to Technical Specification, the system transmits the packet with the pseudorandom hopping frequency with a continuous data and the short burst transmission from the Bluetooth system is also transmitted under the frequency hopping system with the pseudorandom hopping frequency system. Compliance for section 15.247(h):
According to Technical specification, the system incorporates with an adaptive system to detect other user within the spectrum band so that it individually and independently to avoid hopping on the occupied channels. The system is designed not have the ability to coordinated with other FHSS System in an effort to avoid the simultaneous occupancy of individual hopping frequencies by multiple transmitter. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 16 of 97 7 Radio Spectrum Matter Test Results 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Requirement 47 CFR Part 15, Subpart C 15.207 Test Method:
ANSI C63.10 (2013) Section 6.2 Limit:
Frequency of emission(MHz) 0.15-0.5 0.5-5 5-30 Conducted limit(dBV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50
*Decreases with the logarithm of the frequency. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 17 of 97 7.1.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 57.7 % RH 20.5 C f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) Atmospheric Pressure: 1005 mbar 7.1.2 Test Setup Diagram 7.1.3 Measurement Procedure and Data 1) The mains terminal disturbance voltage test was conducted in a shielded room. 2) The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization Network) which provides a 50ohm/50H + 5ohm linear impedance. The power cables of all other units of the EUT were connected to a second LISN 2, which was bonded to the ground reference plane in the same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was used to connect multiple power cables to a single LISN provided the rating of the LISN was not exceeded. 3) The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane. And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane, 4) The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0.4 m from the vertical ground reference plane. The vertical ground reference plane was bonded to the horizontal ground reference plane. The LISN 1 was placed 0.8 m from the boundary of the unit under test and bonded to a ground reference plane for LISNs mounted on top of the ground reference plane. This distance was between the closest points of the LISN 1 and the EUT. All other units of the EUT and associated equipment was at least 0.8 m from the LISN 2. 5) In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.10 on conducted measurement. Remark: LISN=Read Level+ Cable Loss+ LISN Factor Mode:f; Line:Live Line SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 18 of 97 Mode:f; Line:Neutral Line SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 19 of 97 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 20 of 97 7.2 Conducted Peak Output Power Test Requirement 47 CFR Part 15, Subpart C 15.247(b)(1) Test Method:
ANSI C63.10 (2013) Section 7.8.5 Limit:
Frequency range(MHz) Output power of the intentional radiator(watt) 902-928 0.25 for 25 hopping channels <50 1 for 50 hopping channels 1 for digital modulation 1 for 75 non-overlapping hopping channels 2400-2483.5 0.125 for all other frequency hopping systems 1 for digital modulation 5725-5850 1 for frequency hopping systems and digital modulation SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 21 of 97 7.2.1 E.U.T. Operation Operating Environment:
Temperature:
Pretest these modes to find the worst case:
Humidity: 43.8 % RH 25.2 C c:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) Atmospheric Pressure: 1005 mbar f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.2.2 Test Setup Diagram 7.2.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 22 of 97 7.3 20dB Bandwidth Test Requirement 47 CFR Part 15, Subpart C 15.247(a)(1) Test Method:
ANSI C63.10 (2013) Section 7.8.7 7.3.1 E.U.T. Operation Operating Environment:
Temperature:
Pretest these modes to find the worst case:
Humidity: 43.8 % RH 25.2 C c:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) Atmospheric Pressure: 1005 mbar f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.3.2 Test Setup Diagram 7.3.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 23 of 97 7.4 Carrier Frequencies Separation Test Requirement 47 CFR Part 15, Subpart C 15.247a(1) Test Method:
ANSI C63.10 (2013) Section 7.8.2 Limit:
2/3 of the 20dB bandwidth base on the transmission power is less than 0.125W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 24 of 97 7.4.1 E.U.T. Operation Operating Environment:
Temperature:
Pretest these modes to find the worst case:
Humidity: 43.8 % RH 25.2 C b:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) Atmospheric Pressure: 1005 mbar e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.4.2 Test Setup Diagram 7.4.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 25 of 97 7.5 Hopping Channel Number Test Requirement 47 CFR Part 15, Subpart C 15.247a(1)(iii) Test Method:
ANSI C63.10 (2013) Section 7.8.3 Limit:
Frequency range(MHz) Number of hopping channels (minimum) 902-928 2400-2483.5 5725-5850 50 for 20dB bandwidth <250kHz 25 for 20dB bandwidth 250kHz 15 75 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 26 of 97 7.5.1 E.U.T. Operation Operating Environment:
Temperature:
Pretest these modes to find the worst case:
Humidity: 43.8 % RH 25.2 C b:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) Atmospheric Pressure: 1005 mbar e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.5.2 Test Setup Diagram 7.5.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 27 of 97 7.6 Dwell Time Test Requirement 47 CFR Part 15, Subpart C 15.247a(1)(iii) Test Method:
ANSI C63.10 (2013) Section 7.8.4 Limit:
Frequency(MHz) Limit 902-928 2400-2483.5 5725-5850 0.4S within a 20S period(20dB bandwidth<250kHz) 0.4S within a 10S period(20dB bandwidth250kHz) 0.4S within a period of 0.4S multiplied by the number of hopping channels 0.4S within a 30S period SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 28 of 97 7.6.1 E.U.T. Operation Operating Environment:
Temperature:
Pretest these modes to find the worst case:
Humidity: 43.8 % RH 25.2 C b:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) Atmospheric Pressure: 1005 mbar e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.6.2 Test Setup Diagram 7.6.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 29 of 97 7.7 Conducted Band Edges Measurement Test Requirement 47 CFR Part 15, Subpart C 15.247(d) Test Method:
ANSI C63.10 (2013) Section 7.8.6 Limit:
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c) 7.7.1 E.U.T. Operation Operating Environment:
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 30 of 97 Temperature:
Pretest these modes to find the worst case:
Humidity: 43.8 % RH 25.2 C b:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) Atmospheric Pressure: 1005 mbar c:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
e:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.7.2 Test Setup Diagram 7.7.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 31 of 97 7.8 Conducted Spurious Emissions Test Requirement 47 CFR Part 15, Subpart C 15.247(d) Test Method:
ANSI C63.10 (2013) Section 7.8.8 Limit:
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 32 of 97 7.8.1 E.U.T. Operation Operating Environment:
Temperature:
Pretest these modes to find the worst case:
Humidity: 43.8 % RH 25.2 C c:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) Atmospheric Pressure: 1005 mbar f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.8.2 Test Setup Diagram 7.8.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 33 of 97 7.9 Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.205 & 15.209 Test Requirement Test Method:
ANSI C63.10 (2013) Section 6.10.5 Measurement Distance: 3m Limit:
Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 34 of 97 7.9.1 E.U.T. Operation Operating Environment:
Temperature:
22 C Humidity: 54 % RH Atmospheric Pressure: 1005 mbar Pretest these modes to find the worst case:
c:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.9.2 Test Setup Diagram SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 35 of 97 7.9.3 Measurement Procedure and Data a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. d. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. Test the EUT in the lowest channel, the middle channel, the Highest channel. i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and found the X axis positioning which it is the worst case. j. Repeat above procedures until all frequencies measured was complete. Remark 1: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor Remark 2: For frequencies above 1GHz, the field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For the emissions whose peak level is lower than the average limit, only the peak measurement is shown in the report. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 36 of 97 Mode:f; Polarization:Horizontal; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 37 of 97 Mode:f; Polarization:Vertical; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 38 of 97 Mode:f; Polarization:Horizontal; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 39 of 97 Mode:f; Polarization:Vertical; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 40 of 97 7.10 Radiated Spurious Emissions Test Requirement 47 CFR Part 15, Subpart C 15.205 & 15.209 Test Method:
ANSI C63.10 (2013) Section 6.4,6.5,6.6 Measurement Distance: 3m Limit:
Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 41 of 97 7.10.1 E.U.T. Operation Operating Environment:
Temperature:
22 C Humidity: 54 % RH Atmospheric Pressure: 1005 mbar Pretest these modes to find the worst case:
c:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report.(Battery supply) f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) The worst case for final test:
f:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK modulation, /4DQPSK modulation, 8DPSK modulation. All modes have been tested and only the data of worst case is recorded in the report. (Adapter supply) 7.10.2 Test Setup Diagram SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 42 of 97 7.10.3 Measurement Procedure and Data a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. d. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. Test the EUT in the lowest channel, the middle channel, the Highest channel. i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and found the X axis positioning which it is the worst case. j. Repeat above procedures until all frequencies measured was complete. Remark:
1) For emission below 1GHz, through pre-scan found the worst case is the lowest channel. Only the worst case is recorded in the report. 2) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor Preamplifier Factor 3) Scan from 9kHz to 25GHz, the disturbance above 18GHz and below 30MHz was very low. The points marked on above plots are the highest emissions could be found when testing, so only above points had been displayed. The amplitude of spurious emissions from the radiator which are attenuated more than 20dB below the limit need not be reported. 4) For frequencies above 1GHz, the field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For the emissions whose peak level is lower than the average limit, only the peak measurement is shown in the report. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 43 of 97 30MHz~1GHz QP value:
Mode: f; Polarization: Horizontal;
Mode :f; Polarization: Vertical SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 44 of 97 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 45 of 97 Above 1GHz Mode:f; Polarization:Horizontal; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 46 of 97 Mode:f; Polarization:Vertical; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 47 of 97 Mode:f; Polarization:Horizontal; Modulation:GFSK; ; Channel:middle SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 48 of 97 Mode:f; Polarization:Vertical; Modulation:GFSK; ; Channel:middle SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 49 of 97 Mode:f; Polarization:Horizontal; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 50 of 97 Mode:f; Polarization:Vertical; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 51 of 97 8 Photographs 8.1 Test Setup Please refer to setup photos. 8.2 EUT Constructional Details (EUT Photos) Please refer to external and internal photos for details. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 52 of 97 9 Appendix 9.1 Appendix 15.247 1.20 dB Bandwidth Test Mode Test Channel EBW[MHz]
Limit[MHz]
Verdict DH5 DH5 DH5 2DH5 2DH5 2DH5 3DH5 3DH5 3DH5 2402 2441 2480 2402 2441 2480 2402 2441 2480 1.032 1.029 1.032 1.365 1.365 1.365 1.350 1.350 1.350
---
---
---
---
---
---
---
---
---
PASS PASS PASS PASS PASS PASS PASS PASS PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 53 of 97 20 dB Bandwidth_DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.402492000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-20.98 dBm Marker 1 [T1 ]
-0.53 dBm 2.402054000 GHz A 1 Marker 2 [T1 ]
-20.91 dBm 2.401460000 GHz 20 Offset 0.9 dB 1 PK VIEW 10 0
-10
-20 D1 -20.53 dBm 2 3
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 300 kHz/
Span 3 MHz 20 dB Bandwidth_DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.441489000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-20.87 dBm 20 Offset 0.9 dB 1 PK VIEW 10 0
-10 Marker 1 [T1 ]
-0.63 dBm 2.441057000 GHz A 1 Marker 2 [T1 ]
-20.96 dBm 2.440460000 GHz
-20 D1 -20.63 dBm 2 3
-30
-40
-50
-60
-70
-80 Center 2.441 GHz 300 kHz/
Span 3 MHz LVL 3DB LVL 3DB 1 PK VIEW 1 PK VIEW 10 0
-10
-20
-30
-40
-50
-60
-70
-80 10 0
-10
-20
-30
-40
-50
-60
-70
-80 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 54 of 97 20 dB Bandwidth_DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.480492000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-21.51 dBm 20 Offset 0.9 dB Marker 1 [T1 ]
-0.88 dBm 2.480057000 GHz A 1 Marker 2 [T1 ]
-21.10 dBm 2.479460000 GHz D1 -20.88 dBm 2 3 LVL 3DB Center 2.48 GHz 300 kHz/
Span 3 MHz 20 dB Bandwidth_2DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.402678000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-28.42 dBm 20 Offset 0.9 dB Marker 1 [T1 ]
-8.00 dBm 2.401814000 GHz A Marker 2 [T1 ]
-28.38 dBm 2.401313000 GHz 1 D1 -28 dBm 2 3 LVL 3DB Center 2.402 GHz 300 kHz/
Span 3 MHz 1 PK VIEW 1 PK VIEW 10 0
-10
-20
-30
-40
-50
-60
-70
-80 10 0
-10
-20
-30
-40
-50
-60
-70
-80 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 55 of 97 20 dB Bandwidth_2DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.441678000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-28.65 dBm 20 Offset 0.9 dB Marker 1 [T1 ]
-8.10 dBm 2.440814000 GHz A Marker 2 [T1 ]
-28.40 dBm 2.440313000 GHz 1 D1 -28.1 dBm 2 3 LVL 3DB Center 2.441 GHz 300 kHz/
Span 3 MHz 20 dB Bandwidth_2DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.480678000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-28.73 dBm 20 Offset 0.9 dB Marker 1 [T1 ]
-8.41 dBm 2.479811000 GHz A Marker 2 [T1 ]
-28.61 dBm 2.479313000 GHz 1 D1 -28.41 dBm 2 3 LVL 3DB Center 2.48 GHz 300 kHz/
Span 3 MHz 1 PK VIEW 1 PK VIEW 10 0
-10
-20
-30
-40
-50
-60
-70
-80 10 0
-10
-20
-30
-40
-50
-60
-70
-80 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 56 of 97 20 dB Bandwidth_3DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.402666000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-27.89 dBm 20 Offset 0.9 dB Marker 1 [T1 ]
-7.77 dBm 2.402114000 GHz A Marker 2 [T1 ]
-28.00 dBm 2.401316000 GHz 1 D1 -27.77 dBm 2 3 LVL 3DB Center 2.402 GHz 300 kHz/
Span 3 MHz 20 dB Bandwidth_3DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.441666000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-28.16 dBm 20 Offset 0.9 dB Marker 1 [T1 ]
-7.95 dBm 2.441099000 GHz A Marker 2 [T1 ]
-28.74 dBm 2.440316000 GHz 1 D1 -27.95 dBm 2 3 LVL 3DB Center 2.441 GHz 300 kHz/
Span 3 MHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 57 of 97 20 dB Bandwidth_3DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 15 ms 2.480666000 GHz
* RBW 30 kHz Marker 3 [T1 ]
* VBW 100 kHz
-28.31 dBm 20 Offset 0.9 dB Marker 1 [T1 ]
-8.10 dBm 2.480123000 GHz A Marker 2 [T1 ]
-28.39 dBm 2.479316000 GHz 1 D1 -28.1 dBm 2 3 LVL 3DB 1 PK VIEW 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.48 GHz 300 kHz/
Span 3 MHz 2.Conducted Peak Output Power Test Mode Test Channel Power[dBm]
Limit[dBm]
Verdict DH5 DH5 DH5 2DH5 2DH5 2DH5 3DH5 3DH5 3DH5 2402 2441 2480 2402 2441 2480 2402 2441 2480 2.89 2.76 2.51 0.68 0.54 0.27 1.21 1.08 0.8
<=20.97 PASS
<=20.97 PASS
<=20.97 PASS
<=20.97 PASS
<=20.97 PASS
<=20.97 PASS
<=20.97 PASS
<=20.97 PASS
<=20.97 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 58 of 97 Conducted Peak Output Power_DH5_2402 1 PK VIEW 1 PK VIEW Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.401975000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 2.89 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 2.5 MHz/
Span 25 MHz Conducted Peak Output Power_DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.440950000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 2.76 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.441 GHz 2.5 MHz/
Span 25 MHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 59 of 97 1 PK VIEW 1 PK VIEW Conducted Peak Output Power_DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.479850000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 2.51 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.48 GHz 2.5 MHz/
Span 25 MHz Conducted Peak Output Power_2DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.401775000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 0.68 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 2.5 MHz/
Span 25 MHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 60 of 97 1 PK VIEW 1 PK VIEW Conducted Peak Output Power_2DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.440875000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 0.54 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.441 GHz 2.5 MHz/
Span 25 MHz Conducted Peak Output Power_2DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.479875000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 0.27 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.48 GHz 2.5 MHz/
Span 25 MHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 61 of 97 1 PK VIEW 1 PK VIEW Conducted Peak Output Power_3DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.401850000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 1.21 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 2.5 MHz/
Span 25 MHz Conducted Peak Output Power_3DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.441025000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 1.08 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.441 GHz 2.5 MHz/
Span 25 MHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 62 of 97 Conducted Peak Output Power_3DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 5 ms 2.479850000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz 0.80 dBm 20 Offset 0.9 dB 1 A LVL 3DB 1 PK VIEW 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.48 GHz 2.5 MHz/
Span 25 MHz 3.Carrier Frequency Separation Test Mode Test Channel Result[MHz]
Limit[MHz]
Verdict DH5 2DH5 3DH5 2441 2441 2441 0.999 0.993 1.011
>=0.69 PASS
>=0.91 PASS
>=0.90 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 63 of 97 Carrier Frequency Separation_DH5_2441 1 PK VIEW 1 PK VIEW Ref 20 dBm
*
Att 20 dB SWT 5 ms 999.000000000 kHz
*
RBW 100 kHz Delta 1 [T1 ]
*
VBW 300 kHz 0.01 dB Marker 1 [T1 ]
1.89 dBm 2.440996000 GHz A 1 1 LVL 3DB 20 Offset 0.9 dB 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.44 GHz 300 kHz/
Stop 2.443 GHz Carrier Frequency Separation_2DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 5 ms 993.000000000 kHz
*
RBW 100 kHz Delta 1 [T1 ]
*
VBW 300 kHz 0.01 dB 1 1 Marker 1 [T1 ]
-3.72 dBm 2.441032000 GHz A LVL 3DB 20 Offset 0.9 dB 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.44 GHz 300 kHz/
Stop 2.443 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 64 of 97 Carrier Frequency Separation_3DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 5 ms 1.011000000 MHz
*
RBW 100 kHz Delta 1 [T1 ]
*
VBW 300 kHz 0.01 dB 1 1 Marker 1 [T1 ]
-3.80 dBm 2.441086000 GHz A LVL 3DB 20 Offset 0.9 dB 1 PK VIEW 10 0
-10
-20
-30
-40
-50
-60
-70
-80 4.Dwell Time Test Mode DH1 DH3 DH5 2DH1 2DH3 2DH5 3DH1 3DH3 3DH5 Start 2.44 GHz 300 kHz/
Stop 2.443 GHz Test Channel Burst Total Width[ms/hop/ch]
Hops[hop*ch]
Dwell Time[s]
Limit[s]
Verdict 2402 2402 2402 2402 2402 2402 2402 2402 2402 0.39 1.65 2.9 0.39 1.65 2.91 0.37 1.66 2.92 370 170 110 370 170 110 380 170 110 0.144
<0.4 PASS 0.281
<0.4 PASS 0.319
<0.4 PASS 0.144
<0.4 PASS 0.281
<0.4 PASS 0.320
<0.4 PASS 0.141
<0.4 PASS 0.282
<0.4 PASS 0.321
<0.4 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 65 of 97 Ref 20 dBm
*
Att 20 dB SWT 3 ms 387.000000 s RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-0.89 dB Dwell Time_DH1_2402 1 1 TRG -4 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 PK
*
CLRWR Center 2.402 GHz 300 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
Marker 1 [T1 ]
1.97 dBm 0.000000 s A SGL TRG 3DB A SGL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 66 of 97 Dwell Time_DH3_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 1.650000 ms RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-0.53 dB Marker 1 [T1 ]
1.91 dBm 10.000000 s A SGL TRG 3DB A SGL 3DB 1 1 TRG -4.1 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 500 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
1 PK
*
CLRWR SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 67 of 97 Dwell Time_DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 8 ms 2.904000 ms RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-0.47 dB Marker 1 [T1 ]
1.88 dBm 8.000000 s A SGL TRG 3DB A SGL 3DB 1 1 TRG -4.1 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 800 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
1 PK
*
CLRWR SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 68 of 97 Dwell Time_2DH1_2402 Ref 20 dBm
*
Att 20 dB SWT 3 ms 387.000000 s RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-0.23 dB Marker 1 [T1 ]
-1.64 dBm
-3.000000 s A SGL TRG 3DB A SGL 3DB 1 1 TRG -6.9 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 300 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
1 PK
*
CLRWR SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 69 of 97 Dwell Time_2DH3_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 1.650000 ms RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-2.50 dB Marker 1 [T1 ]
-0.98 dBm 10.000000 s A SGL TRG 3DB A SGL 3DB 1 TRG -6.9 dBm 1 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 500 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
1 PK
*
CLRWR SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 70 of 97 Dwell Time_2DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 8 ms 2.910256 ms RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-0.33 dB Marker 1 [T1 ]
-1.17 dBm 6.153846 s A SGL TRG 3DB A SGL 3DB 1 1 TRG -8.6 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 800 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
1 PK
*
CLRWR SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 71 of 97 Dwell Time_3DH1_2402 Ref 20 dBm
*
Att 20 dB SWT 3 ms 369.000000 s RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-1.48 dB Marker 1 [T1 ]
-1.28 dBm
-3.000000 s A SGL TRG 3DB A SGL 3DB 1 1 TRG -6.4 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 300 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
1 PK
*
CLRWR SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 72 of 97 Dwell Time_3DH3_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 1.655000 ms RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-1.17 dB Marker 1 [T1 ]
-0.46 dBm 10.000000 s A SGL TRG 3DB A SGL 3DB 1 1 TRG -6.4 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 500 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
1 PK
*
CLRWR SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 73 of 97 Dwell Time_3DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 8 ms 2.920000 ms RBW 1 MHz Delta 1 [T1 ]
*
VBW 3 MHz
-0.79 dB Marker 1 [T1 ]
-1.52 dBm 8.000000 s A SGL TRG 3DB A SGL 3DB 1 1 TRG -6.4 dBm 1 PK
*
VIEW 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 PK
*
CLRWR Center 2.402 GHz 800 s/
Ref 20 dBm
*
Att 20 dB SWT 3.16 s RBW 1 MHz
*
VBW 3 MHz 20 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center 2.402 GHz 316 ms/
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch 5.Hopping Channel Number Report No.: SZEM190701636902 Page: 74 of 97 Test Mode Test Channel Number of Hopping Channel[N]
Limit[N]
Verdict DH5 2DH5 3DH5 2402 2402 2402 79 79 79
>=15 PASS
>=15 PASS
>=15 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 75 of 97 Hopping Channel Number_DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 78.072500000 MHz
*
RBW 300 kHz Delta 1 [T1 ]
*
VBW 1 MHz
-0.32 dB Marker 1 [T1 ]
2.30 dBm 2.401837000 GHz A 1 LVL 3DB 20 Offset 0.9 dB 1 PK VIEW 10 1 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 8.35 MHz/
Stop 2.4835 GHz Hopping Channel Number_2DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 77.822000000 MHz
*
RBW 300 kHz Delta 1 [T1 ]
*
VBW 1 MHz
-0.35 dB Marker 1 [T1 ]
-1.93 dBm 2.402087500 GHz A 1 LVL 3DB 20 Offset 0.9 dB 10 1 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 8.35 MHz/
Stop 2.4835 GHz 1 PK VIEW SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 76 of 97 Hopping Channel Number_3DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 5 ms 78.239500000 MHz
*
RBW 300 kHz Delta 1 [T1 ]
*
VBW 1 MHz
-0.31 dB Marker 1 [T1 ]
-1.85 dBm 2.402004000 GHz A 1 LVL 3DB 20 Offset 0.9 dB 1 PK VIEW 10 1 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 8.35 MHz/
Stop 2.4835 GHz 6.Band-edge for RF Conducted Emissions Test Mode DH5 DH5 DH5 DH5 2DH5 2DH5 2DH5 2DH5 3DH5 3DH5 3DH5 3DH5 Test Channel Hopping Carrier Power[dBm]
2402 2402 2480 2480 2402 2402 2480 2480 2402 2402 2480 2480 On Off On Off On Off On Off On Off On Off 2.070 2.090 1.670 1.670
-4.120
-3.590
-4.110
-3.970
-3.680
-3.520
-4.210
-4.050 Limit[dBm]
Verdict
<-17.93 PASS
<-17.91 PASS
<-18.33 PASS
<-18.33 PASS
<-24.12 PASS
<-23.59 PASS
<-24.11 PASS
<-23.97 PASS
<-23.68 PASS
<-23.52 PASS
<-24.21 PASS
<-24.05 PASS Max. Spurious Level
[dBm]
-54.126
-54.441
-54.539
-48.115
-55.659
-55.648
-54.687
-50.759
-55.330
-55.287
-53.511
-50.289 1 PK VIEW 1 PK VIEW SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 77 of 97 Band-edge for RF Conducted Emissions_DH5_2402_Hopping On Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.368944000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-54.13 dBm 20 Offset 0.9 dB D1 -17.93 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
2.07 dBm 2.402064000 GHz A Marker 2 [T1 ]
-51.07 dBm 1 2.400000000 GHz LVL Marker 3 [T1 ]
-57.02 dBm 2.390000000 GHz 3DB 4 2 3 Start 2.31 GHz 9.6 MHz/
Stop 2.406 GHz Band-edge for RF Conducted Emissions_DH5_2402_Hopping Off Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.350032000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-54.44 dBm Marker 1 [T1 ]
2.09 dBm 2.402160000 GHz A Marker 2 [T1 ]
-41.68 dBm 1 2.400000000 GHz LVL Marker 3 [T1 ]
-57.66 dBm 2.390000000 GHz 3DB 2 4 3 20 Offset 0.9 dB D1 -17.91 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.31 GHz 9.6 MHz/
Stop 2.406 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 78 of 97 1 PK VIEW 1 PK VIEW Band-edge for RF Conducted Emissions_DH5_2480_Hopping On Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.483800000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-54.54 dBm 20 Offset 0.9 dB 1 10 0
-10
-20
-30
-40
-50
-60
-70
-80 D1 -18.33 dBm 4 2 Marker 1 [T1 ]
1.67 dBm 2.477992000 GHz A Marker 2 [T1 ]
-56.84 dBm 2.483500000 GHz Marker 3 [T1 ]
-57.54 dBm 2.500000000 GHz LVL 3DB 3 Start 2.476 GHz 2.4 MHz/
Stop 2.5 GHz Band-edge for RF Conducted Emissions_DH5_2480_Hopping Off Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.483632000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-48.11 dBm 20 Offset 0.9 dB 1 D1 -18.33 dBm 4 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
1.67 dBm 2.479984000 GHz A Marker 2 [T1 ]
-48.34 dBm 2.483500000 GHz Marker 3 [T1 ]
-57.63 dBm 2.500000000 GHz LVL 3DB 3 Start 2.476 GHz 2.4 MHz/
Stop 2.5 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 79 of 97 1 PK VIEW 1 PK VIEW Band-edge for RF Conducted Emissions_2DH5_2402_Hopping On Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.385456000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-55.66 dBm 20 Offset 0.9 dB D1 -24.12 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
-4.12 dBm 2.405232000 GHz A Marker 2 [T1 ]
-56.75 dBm 2.400000000 GHz 1 LVL Marker 3 [T1 ]
-57.89 dBm 2.390000000 GHz 3DB 4 3 2 Start 2.31 GHz 9.6 MHz/
Stop 2.406 GHz Band-edge for RF Conducted Emissions_2DH5_2402_Hopping Off Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.350416000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-55.65 dBm Marker 1 [T1 ]
-3.59 dBm 2.402064000 GHz A Marker 2 [T1 ]
-44.37 dBm 2.400000000 GHz 1 LVL Marker 3 [T1 ]
-57.83 dBm 2.390000000 GHz 3DB 2 4 3 20 Offset 0.9 dB D1 -23.59 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.31 GHz 9.6 MHz/
Stop 2.406 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 80 of 97 1 PK VIEW 1 PK VIEW Band-edge for RF Conducted Emissions_2DH5_2480_Hopping On Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.484304000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-54.69 dBm 20 Offset 0.9 dB 1 D1 -24.11 dBm 4 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
-4.11 dBm 2.479000000 GHz A Marker 2 [T1 ]
-57.99 dBm 2.483500000 GHz Marker 3 [T1 ]
-56.73 dBm 2.500000000 GHz LVL 3DB 3 Start 2.476 GHz 2.4 MHz/
Stop 2.5 GHz Band-edge for RF Conducted Emissions_2DH5_2480_Hopping Off Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.484064000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-50.76 dBm 20 Offset 0.9 dB 1 D1 -23.97 dBm 4 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
-3.97 dBm 2.480032000 GHz A Marker 2 [T1 ]
-53.21 dBm 2.483500000 GHz Marker 3 [T1 ]
-56.96 dBm 2.500000000 GHz LVL 3DB 3 Start 2.476 GHz 2.4 MHz/
Stop 2.5 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 81 of 97 1 PK VIEW 1 PK VIEW Band-edge for RF Conducted Emissions_3DH5_2402_Hopping On Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.316048000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-55.33 dBm 20 Offset 0.9 dB D1 -23.68 dBm 10 0
-10
-20
-30
-40
-50 4
-60
-70
-80 Marker 1 [T1 ]
-3.68 dBm 2.403024000 GHz A Marker 2 [T1 ]
-54.22 dBm 2.400000000 GHz 1 LVL Marker 3 [T1 ]
-56.35 dBm 2.390000000 GHz 3DB 3 2 Start 2.31 GHz 9.6 MHz/
Stop 2.406 GHz Band-edge for RF Conducted Emissions_3DH5_2402_Hopping Off Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.374032000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-55.29 dBm 20 Offset 0.9 dB D1 -23.52 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
-3.52 dBm 2.402160000 GHz A Marker 2 [T1 ]
-43.58 dBm 2.400000000 GHz 1 LVL Marker 3 [T1 ]
-57.83 dBm 2.390000000 GHz 3DB 2 4 3 Start 2.31 GHz 9.6 MHz/
Stop 2.406 GHz 1 PK VIEW 1 PK VIEW SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 82 of 97 Band-edge for RF Conducted Emissions_3DH5_2480_Hopping On Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.483704000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-53.51 dBm 20 Offset 0.9 dB 1 D1 -24.21 dBm 4 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
-4.21 dBm 2.478784000 GHz A Marker 2 [T1 ]
-58.05 dBm 2.483500000 GHz Marker 3 [T1 ]
-57.96 dBm 2.500000000 GHz LVL 3DB 3 Start 2.476 GHz 2.4 MHz/
Stop 2.5 GHz Band-edge for RF Conducted Emissions_3DH5_2480_Hopping Off Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.483584000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-50.29 dBm 20 Offset 0.9 dB 1 D1 -24.05 dBm 4 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Marker 1 [T1 ]
-4.05 dBm 2.480080000 GHz A Marker 2 [T1 ]
-52.25 dBm 2.483500000 GHz Marker 3 [T1 ]
-55.67 dBm 2.500000000 GHz LVL 3DB 3 Start 2.476 GHz 2.4 MHz/
Stop 2.5 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch 7.RF Conducted Spurious Emissions Report No.: SZEM190701636902 Page: 83 of 97 Test Mode Test StartFre StopFre RBW Channel
[MHz]
[MHz]
[kHz]
VBW
[kHz]
Pref[dBm]
Max. Level
[dBm]
Limit
[dBm]
Verdict DH5 DH5 DH5 DH5 DH5 DH5 2DH5 2DH5 2DH5 2DH5 2DH5 2DH5 3DH5 3DH5 3DH5 3DH5 3DH5 3DH5 2402 2402 2441 2441 2480 2480 2402 2402 2441 2441 2480 2480 2402 2402 2441 2441 2480 2480 30 10000 1000 3000 2.19
-38.670 <-17.81 PASS 10000 25000 1000 3000 2.19
-55.020 <-17.81 PASS 30 10000 1000 3000 2.14
-37.730 <-17.86 PASS 10000 25000 1000 3000 2.14
-54.950 <-17.86 PASS 30 10000 1000 3000 1.88
-37.240 <-18.12 PASS 10000 25000 1000 3000 1.88
-54.790 <-18.12 PASS 30 10000 1000 3000
-3.57
-41.770 <-23.57 PASS 10000 25000 1000 3000
-3.57
-54.950 <-23.57 PASS 30 10000 1000 3000
-3.53
-41.150 <-23.53 PASS 10000 25000 1000 3000
-3.53
-53.830 <-23.53 PASS 30 10000 1000 3000
-4.04
-40.760 <-24.04 PASS 10000 25000 1000 3000
-4.04
-55.100 <-24.04 PASS 30 10000 1000 3000
-3.59
-41.070 <-23.59 PASS 10000 25000 1000 3000
-3.59
-54.540 <-23.59 PASS 30 10000 1000 3000
-3.74
-41.460 <-23.74 PASS 10000 25000 1000 3000
-3.74
-54.800 <-23.74 PASS 30 10000 1000 3000
-3.97
-40.400 <-23.97 PASS 10000 25000 1000 3000
-3.97
-55.040 <-23.97 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 84 of 97 RF Conducted Spurious Emissions_DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.402000000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz 2.19 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW Pref CSE_1 D2 -17.81 dBm 10 1 0
-10
-20
-30
-40
-50
-60
-70
-80 A LVL 3DB Start 2.4 GHz 10 MHz/
Stop 2.5 GHz Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.804383750 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-38.67 dBm Marker 1 [T1 ]
2.65 dBm 2.401613750 GHz A LVL 3DB 20 Offset 0.9 dB 1 D2 -17.81 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 85 of 97 Ref 20 dBm
*
Att 20 dB SWT 90 ms 12.010000000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-55.02 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW CSE_2 Pref 10 0
-10
-20
-30
-40
-50
-60
-70
-80 D2 -17.81 dBm 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz RF Conducted Spurious Emissions_DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.441000000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz 2.14 dBm 20 Offset 0.9 dB 1 D2 -17.86 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 10 MHz/
Stop 2.5 GHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 86 of 97 Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.882897500 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-37.73 dBm Marker 1 [T1 ]
2.55 dBm 2.441493750 GHz A 1 PK VIEW 1 PK VIEW CSE_1 CSE_2 20 Offset 0.9 dB 1 D2 -17.86 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz Ref 20 dBm
*
Att 20 dB SWT 90 ms 21.523750000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-54.95 dBm 20 Offset 0.9 dB D2 -17.86 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 87 of 97 RF Conducted Spurious Emissions_DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.480100000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz 1.88 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW Pref CSE_1 1 A LVL 3DB D2 -18.12 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 10 MHz/
Stop 2.5 GHz Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.960165000 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-37.24 dBm Marker 1 [T1 ]
2.32 dBm 2.480127500 GHz A LVL 3DB 20 Offset 0.9 dB 1 D2 -18.12 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 88 of 97 Ref 20 dBm
*
Att 20 dB SWT 90 ms 22.883125000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-54.79 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW CSE_2 Pref D2 -18.12 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz RF Conducted Spurious Emissions_2DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.402000000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-3.57 dBm 20 Offset 0.9 dB D2 -23.57 dBm 10 0 1
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 10 MHz/
Stop 2.5 GHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 89 of 97 Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.804383750 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-41.77 dBm Marker 1 [T1 ]
0.10 dBm 2.402860000 GHz A 1 PK VIEW 1 PK VIEW CSE_1 CSE_2 20 Offset 0.9 dB 1 D2 -23.57 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz Ref 20 dBm
*
Att 20 dB SWT 90 ms 22.815625000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-54.95 dBm 20 Offset 0.9 dB D2 -23.57 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 90 of 97 RF Conducted Spurious Emissions_2DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.441000000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-3.53 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW Pref CSE_1 1 D2 -23.53 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 A LVL 3DB Start 2.4 GHz 10 MHz/
Stop 2.5 GHz Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.882897500 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-41.15 dBm Marker 1 [T1 ]
0.06 dBm 2.440247500 GHz A LVL 3DB 20 Offset 0.9 dB 1 D2 -23.53 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 91 of 97 Ref 20 dBm
*
Att 20 dB SWT 90 ms 22.307500000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-53.83 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW CSE_2 Pref D2 -23.53 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz RF Conducted Spurious Emissions_2DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.480100000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-4.04 dBm 20 Offset 0.9 dB 1 D2 -24.04 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 10 MHz/
Stop 2.5 GHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 92 of 97 Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.960165000 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-40.76 dBm Marker 1 [T1 ]
-0.44 dBm 2.480127500 GHz A 1 PK VIEW 1 PK VIEW CSE_1 CSE_2 20 Offset 0.9 dB 1 D2 -24.04 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz Ref 20 dBm
*
Att 20 dB SWT 90 ms 22.808125000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-55.10 dBm 20 Offset 0.9 dB D2 -24.04 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 93 of 97 RF Conducted Spurious Emissions_3DH5_2402 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.401900000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-3.59 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW Pref CSE_1 D2 -23.59 dBm 10 0 1
-10
-20
-30
-40
-50
-60
-70
-80 A LVL 3DB Start 2.4 GHz 10 MHz/
Stop 2.5 GHz Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.804383750 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-41.07 dBm Marker 1 [T1 ]
0.19 dBm 2.401613750 GHz A LVL 3DB 20 Offset 0.9 dB 1 D2 -23.59 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 94 of 97 Ref 20 dBm
*
Att 20 dB SWT 90 ms 21.831250000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-54.54 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW CSE_2 Pref D2 -23.59 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz RF Conducted Spurious Emissions_3DH5_2441 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.441100000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-3.74 dBm 20 Offset 0.9 dB 1 D2 -23.74 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 10 MHz/
Stop 2.5 GHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 95 of 97 Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.882897500 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-41.46 dBm Marker 1 [T1 ]
0.28 dBm 2.441493750 GHz A 1 PK VIEW 1 PK VIEW CSE_1 CSE_2 20 Offset 0.9 dB 1 D2 -23.74 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz Ref 20 dBm
*
Att 20 dB SWT 90 ms 22.864375000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-54.80 dBm 20 Offset 0.9 dB D2 -23.74 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 96 of 97 RF Conducted Spurious Emissions_3DH5_2480 Ref 20 dBm
*
Att 20 dB SWT 10 ms 2.480100000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-3.97 dBm 20 Offset 0.9 dB 1 PK VIEW 1 PK VIEW Pref CSE_1 1 A LVL 3DB D2 -23.97 dBm 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 2.4 GHz 10 MHz/
Stop 2.5 GHz Ref 20 dBm
*
Att 20 dB SWT 60 ms 4.960165000 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-40.40 dBm Marker 1 [T1 ]
-0.22 dBm 2.480127500 GHz A LVL 3DB 20 Offset 0.9 dB 1 D2 -23.97 dBm 2 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Start 30 MHz 997 MHz/
Stop 10 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701636902 Page: 97 of 97 Ref 20 dBm
*
Att 20 dB SWT 90 ms 22.843750000 GHz
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-55.04 dBm 20 Offset 0.9 dB CSE_2 D2 -23.97 dBm 1 PK VIEW 10 0
-10
-20
-30
-40
-50
-60
-70
-80 A LVL 3DB 1 Start 10 GHz 1.5 GHz/
Stop 25 GHz
- End of the Report -
| 1 | Test Setup Photos | Test Setup Photos | 852.48 KiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Setup Photos for SZEM1907016369CR FCC ID: VIXSPKA25 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 Photographs 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 1.2 Radiated Emissions which fall in the restricted bands Test Setup 1.3 Radiated Spurious Emissions Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2019-08-08 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2019-08-08
|
||||
| 1 | Applicant's complete, legal business name |
Voxx Accessories Corp.
|
||||
| 1 | FCC Registration Number (FRN) |
0016753550
|
||||
| 1 | Physical Address |
3502 Woodview Trace suite 220
|
||||
| 1 |
3502 Woodview Trace
|
|||||
| 1 |
Indianapolis, IN
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
U******@SGS.COM
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
VIX
|
||||
| 1 | Equipment Product Code |
SPKA25
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
P****** T********
|
||||
| 1 | Title |
VP engineering
|
||||
| 1 | Telephone Number |
(317)******** Extension:
|
||||
| 1 | Fax Number |
317 5********
|
||||
| 1 |
p******@voxxintl.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
| 1 | Name |
K******** X********
|
||||
| 1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
| 1 |
Shenzhen, 518057
|
|||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
86 75********
|
||||
| 1 | Fax Number |
86 75********
|
||||
| 1 |
k******@sgs.com
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
| 1 | Name |
J****** S****
|
||||
| 1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
| 1 |
Shenzhen, 518057
|
|||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
86 75********
|
||||
| 1 | Fax Number |
86 75********
|
||||
| 1 |
J******@sgs.com
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Karaoke System | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | The listed output power is conducted. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd
|
||||
| 1 | Name |
K******** X********
|
||||
| 1 | Telephone Number |
+86 (********
|
||||
| 1 |
K******@sgs.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0019000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC