FCC ID: VIX-AWSBT1 Portable Bluetooth Speaker

Portable bluetooth Speaker Model AWSBT1 Installation and Operation Manual Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to quali ed service personnel. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat. 8. Protect the power cord from being walked on or pinched particularly at plugs, con ve nience re cep ta cles, and the point where they exit from the apparatus. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been dam aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the ap pa ra tus has been exposed to rain or moisture, does not op er ate normally, or has been dropped. Care and Maintenance Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other solvents as they may damage the surface. Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock. If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage. Do not operate or store the system in extreme temperatures (below 32F/0C and above 122F/50C). Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These num bers are located on the product. Model No.: _____________________________________________________________________________________________ Purchase Date: _________________________________________________________________________________________ Dealer/Address/Phone: __________________________________________________________________________________ Introduction The Acoustic Research AWSBT1 portable wireless speaker makes it easy to take your music wherever you go and share it whenever you want, with Bluetooth wireless connectivity and an built-in auxiliary input. Its compact, easy-to-carry and simple to use, with a UV and water-

resistant exterior that lets you take it to the beach, tailgating, the basketball court, even on a camping trip, with no worries. Powering the Speaker System Powering the Speaker There are two options to power your wireless speaker: using the included AC power adapter or using 6 AA batteries (not included). This speaker even offers a protected storage space for your wallet, keys, etc., even for your MP3 player while its connected wirelessly to the speaker. So you can relax and enjoy. Speaker

(side panel) This manual covers various connection options and detailed operating instructions for making the Acoustic Research Portable Wireless Speaker a valued part of your lifestyle. If, after having reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or visit www.acoustic-research.com. 120V AC wall outlet AC Power Adapter AC Power Adapter 1. Insert the small, round plug from the speaker AC power adapter into the DC IN jack on the side panel of the speaker. 2. Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet. Note: The power unit should be plugged in so that it stays vertical or lies at. Tour of the Speaker Front Carrying handle Power and Pairing indicator shows the status of the speaker. Blue, slow blinking: The speaker is on but not paired or connected (like when you turn the speaker on for the rst time). Blue, fast blinking: The speaker is in Bluetooth pairing mode. See the Bluetooth Setup section for more information. Solid blue: The speaker is paired with a Bluetooth-

enabled device and ready to play audio. Solid green: The auxiliary audio input is selected. See the Using the Auxiliary Input section for more information. Side DC IN receives the small round end of the included 9V 1100mA AC power adapter; remove the protective cover to insert the adapter. Battery Compartment Cover Back Bottom Battery Compartment cover that help keep the speaker sealed against the elements. See the Powering the Speaker: AA Batteries section for instructions on removing this cover and inserting batteries. is held in place by two metal bolts Top turns the speaker on and off (press and hold for 3 seconds). It also toggles between Bluetooth and auxiliary input for the audio signal (press). Pair puts the speaker in pairing mode for Bluetooth setup (press and hold for 3 seconds). It also performs a fast reconnect with devices that have lost connection (press). See the Bluetooth setup section for more information. Volume +/ buttons adjust the speakers volume level AA Batteries 1. Twist the bolts on the bottom of the speaker counter-clockwise to loosen them completely. 2. Remove the bottom of the speaker to access the battery compartment. 3. Insert six (6) AA batteries (not included) into the battery compartment, following the polarity diagrams (+ and ). 4. Line the bolts on the compartment door up with the holes on either side of the battery compartment and place the speaker bottom back on the speaker. 5. Screw the bolts back in and tighten them. Note: Place the rubber cap in the speaker power input jack when using batteries. DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations. Setting Up Bluetooth Wireless Pairing Any Bluetooth-enabled device that you wish to stream audio to your speaker system must rst be paired to the speaker. The process is simple, and in most cases the pairing process needs to be done only once. To pair your Bluetooth-enabled device with the speaker:

1. Make sure your devices Bluetooth is turned on. See the wireless and/or network settings menu on your device to check. 2. If the speaker isnt already on, press and hold the button for 3 seconds to turn it on. You will hear 4 beeps to indicate the speaker is turned on. The indicator light on the front of the speaker starts ashing blue. 3. Press and hold for 3 seconds the Pair button to enter pairing mode. You will hear 2 beeps to indicate pairing mode is entered. The indicator on the front of the speaker starts blinking faster. 4. Open the Bluetooth settings menu on your device. Select AWSBT1 from the list of devices available (you might have to scan for devices). If your device asks for a password, enter 0000. 5. A con rmation screen will appear on your device once the speaker and the device are successfully paired. The blue indicator turns solid blue to indicate successful connection. The speaker is now ready for you to stream audio from your device. 6. Turn the volume on your device to at least 3/4 max, then start playing something on the device. Control the speaker volume on the speaker itself, using the +/ buttons on the top of the speaker. Storage compartment houses the built-in cable for the speakers auxiliary input. It also offers a closed compartment for your connected device or other items. See the Using the Auxiliary Input section for more information. Note:

If you notice the sound from the speaker is distorted, turn down your devices volume. You will hear a beep if you turn the speakers volume up to the maximum. Setting Up Bluetooth Wireless Troubleshooting Streaming Audio With Bluetooth Once youve paired and connected your device with the speaker, you can control music playback from the palm of your hand. Select your music, stop it, change songs and playlists, all right from your devices screen. To adjust volume: Press the Vol +/ buttons on top of the speaker. To disconnect from the speaker: Either turn Bluetooth off on your device or choose Disconnect from the list of options in your devices Bluetooth settings. To reconnect with the speaker: Just turn the speaker on and wait a few seconds for the speaker to nd and connect to your device. If the speaker still hasnt found your device (which may happen if, for instance, another device has been connected after yours) make sure the speaker isnt connected to another device currently. Then select the AWSBT1 from the list of Bluetooth connections available in your devices Bluetooth menu to connect to it or Fast Re-connect with press and release of the Pair button. Using the Auxiliary Input Connecting to an Audio Source Connecting to an MP3 player, CD player, or computer 1. Open the storage compartment on the back panel to show the attached 3.5mm cable. 2. Connect the cable to the headphone output on your MP3 player or CD player (or the audio output jack on your computer) and start playback. 3. Make sure the speaker is on. Then press the button on the top of the speaker. The light on the front of the speaker will change to solid green. You should hear sound coming from the speaker now. To switch back to the speakers Bluetooth connection, press the button again. Note: You may t your connected device, such as iPhone or iPod touch, inside the closed compartment while the speaker is playing. Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the speaker. Turning the Speaker Off 1. Press and hold the Power button on the top of the speaker to turn the speaker off. 2. Con rm that the speaker is off by verifying that the indicator light on the speakers front panel is no longer illuminated. Note: When you turn off the speaker in Bluetooth mode, you will hear 4 beeps to indicate Bluetooth mode is turned off. The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com. Issue:

No sound Cause and solution:

Check that the AC power adapter is fully inserted into the wall outlet and the power cord from the AC adapter is rmly connected to the speakers power input jack. or If youre using batteries for the speaker, check that they are fresh and inserted with correct polarity (+, ). Make sure the batteries are fresh and replace if necessary. Con rm that the speaker is turned on. RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Industry Canada Regulatory Information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Check that the audio source component (stereo, MP3 player, etc.) is turned on and This Class B digital apparatus complies with Canadian ICES-003. transmitting sound as it normally should. Make sure the volume on your audio source is turned up. Check that the speaker volume is turned up. Move the Bluetooth device and the speaker closer together. The Bluetooth wireless technology generally can operate within a range of 35 feet. However results may vary based on other factors such as room layout, wall material, weather conditions, etc. Make sure you have switched to the speakers Bluetooth connection when streaming audio with Bluetooth. Make sure you entered the correct passkey when pairing your device. Cannot pair the speaker with your Bluetooth device Make sure the Bluetooth capability of your device is turned on and discoverable. Move the Bluetooth device and the speaker closer together. The Bluetooth wireless technology generally can operate within a range of 35 feet. However results may vary based on other factors such as room layout, wall material, weather conditions, etc. Make sure your device supports audio transfer. Turn off all other nearby Bluetooth devices or disbale their Bluetooth functionality. Bluetooth Reset: Press and Hold the Pair Button for 12 seconds. (Fast double beep on reset). This resets the Bluetooth module in the speaker. Specifi cations Speaker Bluetooth wireless technology: Bluetooth v2.1 + A2DP pro le 2-way acoustic design: 3 driver, 1.5 tweeter Audio output power: 5W (Maximum) Audio line-in Distortion : 0.5%

S/N Ratio : 65dB (typical) Operation distance : Up to 10 meters (open area) Frequency response: 20Hz - 20kHz Operates using supplied AC adapter or six (6) AA batteries (not included)

*Maximum range; results may vary according to environment. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

FCC Regulations state that unauthorized changes or modi cations to this equipment may void the users authority to operate it. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiovox Accessories Corporation is under license. Other trademarks and trade names are those of their respective owners. 12 Month Limited Warranty Audiovox Accessories Corporation (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced

(at the Companys option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g. dated bill of sale), speci cation of defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer. This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static or noise, to costs incurred for the installation, removal or reinstallation of the product. The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or by leaving non-rechargeable batteries in the product while plugged into an AC outlet. THE EXTENT OF THE COMPANYS LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANYS LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you speci c legal rights and you may also have other rights which vary from state/province to state/province. U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788 CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 16, Mississauga Ontario L5T 3A5 Trademark(s) Registered www.Acoustic-Research.com MADE IN CHINA AWSBT1 US IB 01