FCC ID: VIXPNMDUALCAM WiFi Camera

DUAL CONNECT BABY MONITOR with Wi-Fi viewing and dedicated parent unit FP O Whats inside Welcome! .............................................................. xx Getting started .................................................... xx Tour of the system ............................................. xx Everyday use ........................................................ xx Motion detection ............................................ xx Sound detection ............................................. xx Auto-record time............................................ xx Battery life ......................................................... xx Temperature alarm ........................................ xx Music .................................................................... xx Share camera with friend ........................... xx Flip horizontally / vertically ....................... xx Camera time set ............................................. xx Camera info ...................................................... xx Delete Camera ................................................. xx Troubleshooting / FAQs .................................. xx User Guide PNMDUAL5 G e t t i n g S t a r t e d WELCOME!

This WiFi Baby Monitor makes it simple to keep your eyes and ears on your little one from home or from anywhere!

This guide takes you through the steps to get started!

Step 1: Unpack Check out our setup videos On your computer, go to http://bit.ly/pnwi-setup or scan the QR code here. FPO Before you start... Make sure you read the Important Information sheet included in this package. Rechargeable WiFi camera Parent monitor The accessories:

(2) charging cables

(2) power adapters

(2) Mounting screws

(1) 8GB Micro SD card

(pre-installed in the camera) 2 GETTING STARTED Step 2: Charge the monitor Step 3: Position the camera(s) d e t r a t S g n i t t e G Find one of the charging cables included in this package. Plug one end of this cable into the USB CHARGING jack on the side of the parent monitor. Find a location for the camera that gives you the best view of your baby in his or her crib. Plug the other end of the charging cable into one of the included charging adapters. Then plug the adapter into an outlet or surge protector. Place the camera on a at surface, like a dresser or shelf, or mount the camera to a wall using the keyhole slots on its bottom (see the mounting template included in this package). IMPORTANT: NEVER place the camera or cords of any kind inside the crib. NEVER place the camera or cords within reach of the baby. WARNING Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (0.9m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. 3 G e t t i n g S t a r t e d Step 4: Test your WiFi signal Step 5: Plug in the camera Plug one end of the included charging cable into the DC In jack on the back of the camera. Plug the other end into the included power adapter. Then plug the adapter into an outlet or surge protector. The camera turns on automatically when you plug it in (the indicator light on its back panel turns solid red). Your Project Nursery WiFi Camera needs strong enough signal from your WiFi router in order to send its video signal. Heres how to test the strength of your WiFi signal in your babys nursery using your smartphone or other portable wireless device

(like a tablet or iPod touch). First, go to where you want to put the camera. Make sure your smartphone or other portable wireless device is connected to the WiFi network you want to test. Look at the WiFi icon on your device screen to see the strength of the connection. For example, on iOS devices look in the upper left-hand corner of the screen for the WiFi icon (shown here). For best results, look for a location with at least 50% strength to use the WiFi camera. 4 Step 6: Download and install the Project Nursery Monitor App on your phone or tablet Step 8: Create a Project Nursery user name and password d e t r a t S g n i t t e G In the Google Play or Apple App Stores, search for PROJECT NURSERY MONITOR and look for the icon shown here. Then download and install the App. The rst time you launch the Project Nursery App, youll need to create a user name and password so that you can access your camera securely. Register Login Step 7: Launch the Project Nursery Monitor App Once the Project Nursery Monitor App has installed on your smarphone or tablet, press the icon to launch the App. IMPORTANT!

You must connect the WiFi camera through the App on your phone or tablet before you can connect it to the parent monitor. Username Email Address Password Confirm Password Sign Up Press the Register button to start, then follow the steps to set up your account. IMPORTANT: Make sure you give a valid email address that you have easy access to. The App will use this address if you ever need to recover or reset your password. Once youve nished creating your user name and password, the App will ask you to Login with the name and password you created. IMPORTANT: Your user name cannot contain special characters (like @)only letters and numbers. 5 G e t t i n g S t a r t e d Step 9: Pair the WiFi camera with the App. Make sure the Project Nursery App is open on your phone or tablet. Also make sure that your phone or tablet is connected to your WiFi network. In the Apps home screen, press the Camera) in the upper right corner of the screen. icon (Add Device List Message My Center Add Camera Add new camera with WiFi Add new camera with QR code Get shared camera from friend In the next screen, press the Add new camera with WiFi button. The App will prompt you to make sure your camera is on. If you havent already turned it on, press the POWER button on the right side of the camera (the cameras LED lights up), then press the Next step button in the App. 6 Add Camera Scan QR code located on bottom of camera Press to open QR code scanner ID:

Camera name:

Next step The next screen in the App lets you name the camera youre setting up and prompts you to scan the QR code on the bottom of the camera. To name the camera youre setting up: Press in the Camera name eld and enter the name you want to use. To scan the QR code on the WiFi camera: Find the QR code on the bottom of the WiFi camera. Position your smartphone or tablet so that its camera can scan this QR code. Then press where indicated in the App to scan this QR code. Configure WiFi 1. Your camera should be plugged in and turned ON. Press the Set button on the bottom of your camera for 1 second.You will hear one beep and the LED will start blinking red. 2. Choose WiFi SSID (or network name) and enter password below. Make sure you enter the info correctly. If your WiFi SSID does not have a password, you will need to create one. This is for your safety and security. Consult the user guide for your WiFi router/AP to add a password. Helpful Hint: Click on the lock icon in the password area to hide or display text. 3. After youve entered your WiFi info below, press Next step. Your camera will begin connecting to your WiFi network. This can take 23 minutes to complete. When you hear two beeps and the LED turns solid green, your camera is successfully connected and ready for you to use. Next step After youve scanned the QR code on the bottom of the WiFi Camera, the App will ask you to press the SET button on the bottom of the camera and enter the name (WIFI SSID) and password of your WiFi network. Find the SET button on the bottom of the WiFi camera. Press it for one second (until the camera gives an audio signal). Next step Enter the name (WIFI SSID) and password for your home WiFi network in the App. IMPORTANT: Double check that youve typed your network name and password correctly otherwise, the camera wont work with the App!

d e t r a t S g n i t t e G Once youve nished entering your network name and password, press the Next step button on the App screen. The indicator light on the back of the WiFi camera starts ashing the camera is trying to join your WiFi network. Congratulations!

Camera successfully added!

Once the WiFi camera has successfully connected to your WiFi network, youll see the Success screen in the App and the indicator light on the back of the camera will turn green. Congratulationsyouve just set up your rst camera!

IMPORTANT: If this WiFi setup option doesnt work, try the Add new camera with QR code option in the Add Camera screen. If the WiFi camera does not connect, follow the instructions in the App to troubleshoot. 7 G e t t i n g S t a r t e d Step 10: Choose the camera from the home screen Congratulations! Youve just set up the camera for viewing on your smartphone. Now its time to set it up with the local monitor. Connection Troubleshooting

+ Make sure your phone or tablet is connected to the WiFi network you want to use.

+ Make sure the camera is getting a good signal from your WiFi router. See step 3 for more information.

+ Test your WiFi network with other devices to make sure its working.

+ Double check that youve entered the correct password for your WiFi network in the Project Nursery App.

+ Make sure your router is broadcasting its SSID

(name). The Project Nursery WiFi camera does not support hidden SSIDs.

+ Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi.

+ Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method.

+ Make sure that there is no MAC lter on router or add MAC address to router whitelist.

+ Reset the camera to set up connection again. Press and hold SET key for 10 seconds. The camera gives a long beep when it is fully reset. Sallys nursery Device ID1234567891234560 Press the part of the home screen showing the camera you set up in order to choose this camera. The Camera View screen is your gateway to total control of your WiFi camera from virtually anywhere. The next chapter gives you a tour of the features available from this screen. Sallys nursery Device ID1234567891234560 Device List Message My Center Sallys nursery 0 0000000000000000000000000000000000000000000 2016-1-28-12:00 H D SD RECORD SNAPSHOT Swipe screen above to Pan/Tilt TALK SOUND ON 8 d e t r a t S g n i t t e G Step 11: Turn on the monitor Then press Password and use the on-screen keyboard to enter the password for this network. Press and hold the POWER button on the parent monitor to turn it on. Step 12: Connect the monitor to your WiFi network WiFi Network Password CONNECT WELCOME!

WiFi Network Home WiFi Sig_Guest Comcast_123 The rst time you turn on the parent monitor, youll be asked to choose your WiFi network and enter its password. Press WiFi Network and choose your network from the list that appears.

?

?

IMPORTANT: Make sure you use the same WiFi network you used to set up the camera with the App!

myNetwork netwkpass1 CONNECT WELCOME!

Once youve chosen your network and entered your password, press the CONNECT button to connect to it.

?

The process of connecting the monitor and camera to your WiFi network might take several minutes to complete. 72 10:30AM Once the monitor and camera have connected to your WiFi network, you should start seeing video from the camera on your monitor. 9 T o u r o f t h e s y s t e m TOUR OF THE SYSTEM Parent Monitor turns the monitor on and off (press and hold for 1 second). turns the screen on and off. Press and hold for 2 seconds to switch cameras. turn the volume down/up (you can and also do this through the touchscreen). In menu screens, these navigate left/right. zooms the camera in and out (you can also do this through the touchscreen). This button also selects items in menu screens. starts pan/tilt of the camera (you can also do this through the touchscreen). Use the arrows to pan and tilt once youve activated this function. This button also navigates up in menu screens. lets you talk through the cameras speaker

(you can also do this through the touchscreen). Press and hold while talking (release when youre done). This button also navigates down in menu screens. SOUND LEVEL indicators show you the level of sound from your babys room. USB CHARGING jack (side panel, not shown) plugs into your charging cable to recharge or power the parent monitor. Watching baby You can turn the display on and off without turning the monitor off (this can help extend battery life). Youll still hear your baby, but the display will be asleep until you awaken it. To turn the display on or off: Press the VIDEO ON/

OFF button on the parent monitor. 10 Parent Monitor Touchscreen 72 10:30AM Pan, Tilt, and Zoom To zoom the active camera: Touch the parent monitors touchscreen, then press also press the OK-ZOOM button. To pan or tilt the active camera: Touch the parent monitors touchscreen, then press one of the arrow icons. You can also press the PAN/TILT button and use the arrow buttons. You can Almost all of the parent monitors features are accessible through its touchscreen. Just tap the screen to see icons for each feature. and turn the volume down/up. pan and tilt the camera. accesses the parent monitors menu system. zooms in on the camera image. m e t s y s e h t f o r u o T lets you talk through the cameras speaker. Press and hold while talking. clears the icons from the screen. Listening to baby Talking to baby The SOUND LEVEL indicators on the parent monitor show you at a glance the sound level in your babys room, regardless of how loud the audio is on the parent monitor. To talk through the speaker on the active camera:

Touch the parent monitors touchscreen, then press and hold TALK button on the parent monitor. You can also press and hold the To increase or decrease the volume of the audio monitor: Press the VOL+ or VOL buttons on the parent monitor. Talk normally to the parent monitoryour voice will come out on the cameras speaker. Release the on-

screen microphone icon when youre done talking. 11 Sallys nursery 0 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000 2016-1-28-12:00 App Camera View Screen

(Settings) accesses the Settings menu for this camera. Press this icon to adjust the WiFi and other settings for this camera. Camera view shows you the image from your WiFi camera. Pan and tilt the camera by swiping on the screen left/right or up/down. Zoom the camera by double-tapping the screen. H D SD

(Multi-Camera View) lets you see multiple cameras at once on a single screen (if youve set up multiple cameras). Press this icon to access the multi-camera view screen (phone App only). RECORD SNAPSHOT H D SD (HD-SD Select) lets you switch between high- and standard-

denition video on the view screen. T o u r o f t h e s y s t e m

(Micro-SD Card) accesses any content stored on the cameras Micro-

SD Card (not included). Press this icon to start viewing or downloading motion/sound-activated videos or images from the cameras Micro-SD Card. (This is where youll see auto recordings.) RECORD (Record) starts/stops recording video. The video le is saved to your smartphone or tablet. SNAPSHOT (Snapshot) takes a still photo of the camera video. The snapshot le is saved to your smartphone or tablet. TALK (Talk) lets you speak through this cameras built-in speaker. Press and hold this icon to start speaking. SOUND ON (Sound On/Off) turns the sound from the camera on and off. Swipe screen above to Pan/Tilt TALK SOUND ON Pan, Tilt, and Zoom To zoom the active camera: Double-tap the camera view screen. To pan or tilt the active camera: Swipe the camera view screen left/

right or up/down. 12 Camera (front) Camera (bottom) Camera (back) Nighttime sensor adjusts the camera sensitivity to the amount of ambient light. Microphone picks up sound around the camera. POWER button

(right side) turns the camera on and off (press and hold). Mounting keyholes let you mount the camera on a wall (mounting screws included). DUAL MICRO-SD slot (left side) holds the pre-

installed micro-SD card for storage of automatic photos/

video. SET starts the WiFi setup process (press and hold). QR code passes the camera ID information to the App during the WiFi setup process. m e t s y s e h t f o r u o T Adjustable antenna communicates wirelessly with your WiFi network. DC In jack plugs into your charging cable to power the camera. Indicator light shows the power and connection status of the camera:

- off (camera not plugged in or powered on)

- solid red (on but not connected

- blinking red (in the process of connecting)

- solid green (connected to network and App)

- blinking green (camera being actively viewed on monitor or App). Thermal sensor detects the temperature around the camera. 13 3. EVERYDAY USE You customize your Dual-Connect Baby Monitor System to best t your needs and environment, including motion, sound, and temperature alerts that notify you automatically. Access these settings through the App on your phone/tablet or through the menu system on the parent monitor. This chapter takes you through the settings you can customize, one by one. Sallys nursery 2016-1-28-12:00 0 0000000000000000000000000000000000000 Settings H D SD RECORD SNAPSHOT Motion detection H Sound detection Battery Life M H L L OFF OFF Swipe screen above to Pan/Tilt Auto-record time 20s 60s 90s TALK SOUND ON Temperature alarm M i Whit N i To access the App menu system: In the Camera View screen, press the

(Settings) icon. 72 10:30AM 10:30AM To access the parent monitor menu system:

Touch the screen. Then press the icon. E v e r y d a y u s e 72 14 72 10:30AM 72 72 View Cameras Scan Cameras 10:30AM 1 3 2 4 View Cameras Scan Cameras 10:30AM 5 sces 15 sces 10 sces OFF Sound Activated Scan Cameras (Parent Monitor only) The Cameras menu on the parent monitor lets you change which camera youre viewing (if you have multiple cameras set up). It also offers several options for scanning through the cameras automatically. IN THE APP: If you have multiple cameras set up, you can view up to 4 at once on the App using the screen. button in the camera view ACCESSING CAMERAS ON THE PARENT MONITOR 1 Touch the parent monitors screen. Then press the 2 Press the Cameras icon. To view a different camera: In the Cameras menu, press View Cameras. Then press the icon for the camera you want to view. The screen switches to that camera, and the status bar at the top of the screen indicates the camera youre viewing:

icon.

, or

,

,

. e s u y a d y r e v E To scan through the cameras automatically: In the Cameras menu, press Scan Cameras. Select the scan option you want:

switch every 5, 10, or 15 seconds, or sound-activated scan. The screen switches to the rst camera, and the status bar at the top of the screen shows an indicator for scanning:

,

, or

. It also shows the camera youre viewing Note: You must have Sound Activated Video alerts turned on for the Sound Activated Scan to work. See the next page for details. To stop scanning cameras: select Scan Cameras in the Cameras menu. Then select Off. 15 Motion/Alerts The Dual Connect System lets you set up alerts that are activated by motion, sound, or temperature in your babys room. It also lets you set up an alert for when the monitors rechargeable battery needs to be recharged. You can set up these alerts through the parent monitor or through the App. SETTING ALERTS ON THE PARENT MONITOR 1 Touch the parent monitors screen. Then press the 2 Press the MOTION/ALERTS icon. 3 Select the kind of alert you would like to set. Motion Activated Video automatically shows video when the active camera detects movement. It has three levels of sensitivity: Low, Medium, and High. Once youve selected the level of sensitivity you want, the status bar at the top of the screen shows an indicator for motion activation:

When the active camera senses motion, this indicator ashes. icon. Sound Activated Video automatically shows video when the active camera detects sound. It has two levels of sensitivity:

Low and High. Once youve selected the level of sensitivity you want, the status bar at the top of the screen shows an indicator for sound activation:

. When the active camera senses sound, this indicator ashes. Temperature Alert noties you when your babys room is too hot or too cold. There are separate alerts for High and Low temperatures. Press the one you want to set, then use the + and on-screen buttons to set the temperatures you want. Once youve set these up, the status bar at the top of the screen shows an indicator for temperature alerts: . 72 10:30AM E v e r y d a y u s e 72 10:30AM Motion Activated Video Sound Activated Video Temperature Alert Low Battery Alert Out of Range Alert Note about alert sensitivity:

You might want to test different levels of sensitivity for motion, sound, and temperature alerts, to nd the best t for your environment and preference. 16 Notes about notications:

+ Motion, sound, and temperature alerts you set on the parent monitor will send notications on the App as well (if you have App notications turned on).

+ The App sends a maximum of 2 notications every 4 minutes. It prioritizes notications in the following order: temperature, sound, motion. If the temperature in your babys room goes beyond the limit(s) you set, the parent monitor displays an alert and the temperature alert indicator turns red in the status bar. Low Battery Alert tells you when the monitor needs to be recharged.. Once youve turned this alert on, the status bar at the top of the screen shows an indicator for low-battery alert: . Out of Range Alert tells you when the monitor is disconnected from or out of range of the camera (for example, if the cameras lost power). Once youve turned this alert on, the status bar at the top of the screen shows an indicator for out-of-range alert: . Sallys nursery 0 0000000000000000000000000000000000000000000000000 2016-1-28-12:00 Settings H D SD Motion detection H RECORD SNAPSHOT Sound detection Battery Life M H L L OFF OFF Swipe screen above to Pan/Tilt TALK SOUND ON Auto-record time 20s 60s 90s Temperature alarm Music White Noise Share camera with friend Flip horizontally Flip vertically Camera time set Camera info Delete Camera SETTING ALERTS ON THE APP 1 2 In the Camera View screen, press the In the Settings menu, set the sensitivity of the alerts you want to set.

(Settings) icon. e s u y a d y r e v E Motion detection sends a notication on your phone when the camera detects movement. It has three levels of sensitivity: H (high), M (medium), and L (low). Sound detection sends a notication on your phone when the camera detects sound. It has two levels of sensitivity: H

(high) and L (low). Battery life sends a push notication when the rechargeable battery in the WiFi camera gets to a certain level. Select Battery life, then press the switch next to Push Notications for Camera Battery and choose when you would like to be sent notications. 17 Auto-record time automatically records a certain amount of video when the camera detects a motion or sound alert.Select the amount of Auto-record time you want (in seconds) when a motion or sound alert is triggered: 20s, 60s, or 90s. IMPORTANT: You must keep the provided micro SD card in its slot on the camera to use this feature. Temperature Alarm sends a push notication to your phone when your babys room is too hot or too cold. Select Temperature alarm, then press Edit at the top of the screen to change the settings. To change from degrees Fahrenheit to Celsius:

Press the C. To set a high temperature alert: Press the switch next to High temperature alert. Then set the temperature you want for the high temperature alert. To set a low temperature alert: Press the switch next to Low temperature alert. Then set the temperature you want for the high temperature alert. Temperature alarm E v e r y d a y u s e 18 72 10:30AM NOTE: If theres a lullaby currently playing on a camera, a green arrow icon appears next to it. Music White Noise MusicMusic

"I Don't Want to Miss a Thing"

"Holiday"

"Jolene"

Rain Waves White Noise Lullabies This Project Nursery system comes with 3 lullabies, 2 nature sounds, and white noise ready to playsimply choose the one you want, and the camera youre on will play it back. CONTROLLING LULLABIES FROM THE PARENT MONITOR 1 Make sure the monitor is displaying the camera you want to play the lullaby on. If you want to play on a different camera, press the MENU button and select CAMERAS. Then select View Camera and choose the camera you want. 2 Press the MENU button to access the main menu. 3 Press the LULLABIES icon. 4 Press the option you want to play. The status bar at the top of the screen shows an indicator for lullabies:

. e s u y a d y r e v E CONTROLLING LULLABIES FROM THE APP To play a lullaby, nature sound, or white noise from the active camera: Press Music in the Setup menu. Then press the option you want to play. Note: Make sure youre displaying the camera you want to play the lullaby on. If you want to play on a different camera, go back to the Apps home screen and choose that camera. 19 Sleep Mode (Parent Monitor only) You can set up the parent monitor to turn off the display automatically after a set amount of time. SETTING SLEEP MODE 1 Press MENU on the parent monitor. 2 Press the Sleep Mode icon. 3 In the Sleep Mode menu, press Sleep Mode (video off, audio only) to turn sleep mode on. Then select the delay before the display turns off automatically: 5, 30, or 60 minutes. (The audio from your camera will stay on even when the display is off.) Playing Back Pictures and Videos You can access the videos or pictures stored on the cameras SD card from the parent monitor and from the App. IMPORTANT:

You must keep the provided micro SD card in its slot on the camera to use this featurethis is where motion and sound-

activated videos are stored. 72 10:30AM Sleep Mode(video off audio only) 5mins 30mins 60mins OFF E v e r y d a y u s e 20 ACCESSING PICTURES/VIDEOS FROM THE PARENT MONITOR 1 Press MENU on the parent monitor. 2 Press the Play icon. 3 Press the button for the kind of media you want to play back: Photo or Video. 4 The screen displays a list of the photos or videos on the cameras SD card. Press the name of the image or video you want to see on the display. 5 Use the on-screen controls to stop, play/pause, and exit the screen. ACCESSING PICTURES/VIDEOS FROM THE APP 1 Press 2 Choose the photo or video you want to start playing. on the camera view screen in the App e s u y a d y r e v E 72 Photo Video 10:30AM 201600309002.jpg 201600309003.jpg 201600309011.jpg 201600309012.jpg Sallys nursery 2016-1-28-12:00 0 000000000000000000000000000000000000000000000000000000000000000000000000000 H D SD RECORD SNAPSHOT Swipe screen above to Pan/Tilt TALK SOUND ON 21 Settings (Parent Menu only) The Settings menu lets you customize the monitor to match your preferences. It also gives you technical information about the monitor and support. ACCESSING THE PARENT MONITORS SETTINGS MENU 1 Press MENU on the parent monitor. 2 Press the Settings icon. 3 Press the setting youd like to adjust. (Press the arrow down at the bottom of the list if you dont see the setting you want.) Wi Set lets you enter the network name and password for your monitor and camera. IMPORTANT: This must be the same network you used to set up the camera through the App. If you want to change networks, delete the camara in the App and follow the setup instructions from the beginning with the new network. Adjust Brightness lets you adjust the level of brightness on the parent monitor. Press this option, then use the + and on-screen buttons to set the level desired. Auto Dimming lets you adjust the amount of time of inactivity before the parent monitor dims its display brightness to conserve energy. Press this option, then select the amount of time desired: 5, 10, or 15 minutes. Time Set lets you adjust the time displayed on the parent monitor. Press this option, then use the up and down on-

screen buttons to set the hours, minutes, and AM/PM. 72 10:30AM E v e r y d a y u s e 72 10:30AM Wifi Set Adjust Brightness Auto Dimming Time Set Temperature 22 72 10:30AM French English Language Select Factory Reset Support Temperature lets you select how youd like temperature to be displayed: in degrees Fahrenheit or Celsius. Language Select lets you select the language you want for the menu system on the parent monitor. Factory Reset lets you return the parent monitor to the settings it had when you got it out of the box. If youve tried all of the troubleshooting solutions to solve a problem, and nothing seems to work, you might need to reset the monitor to its factory settings and start setup again. WARNING:

Resetting to factory settings erases all of your custom settings. You will have to set up the monitor from scratch. Support gives you information about the rmware version used in your monitor and camera. It also provides customer support information. Share camera with friend Share camera with friend (App only) You can share video with friends and family, so that they can see whats happening with baby. These guest accounts have limited access to settingsthey can view and talk through cameras and record pictures and videos directly to their phone. 1 Make sure the person you want to share with has e s u y a d y r e v E Steps to share with friend Decice List Add Camera Add new camera with WiFi Add new camera with QR code Get shared camera from friend Step 1: Open App and click then Add camera button above in your friends mobile phone Step 2: Select the third option and scan the QR code above downloaded the Project Nursery App on their phone/tablet. 2 On your phone or tablet, go to the Settings menu and press Share camera with friend. Have the person you want to share with follow the steps shown. IMPORTANT: Your friend or family member will need to scan the QR code on the screen. If they are not physically present to do so, either print the screen or do a screenshot and send it to a phone they can scan with their phone. 23 Flip horizontally Flip vertically Flip horizontally / vertically (App only) Flip horizontally and vertically let you reverse the orientation of the Camera View video. Press the switches next to each to toggle these on and off. Camera time set Camera time set (App only) The camera time on the screen is from network. If you find the camera time is not the same with the mobile phone, please click the button below to synchronize time. Camera info Device name Serial #

MAC address IP Camera 215451516514 442412314575756 Hardware version 20130101 Software version BNHS5750101 E v e r y d a y u s e The WiFi cameras internal clock might need to be periodically syncronized with your phones clock. If you notice the two times dont match, choose Camera time set in the Apps Settings menu, and press the Camera time sync button at the bottom of the page. The App will sync the current WiFi cameras clock with your phone or tablets clock. Camera info (App only) The Device info screen gives you details about the current WiFi camera, including the amount of memory left on the micro-SD card if you have one installed. The Format SD card button at the bottom of the Camera info screen lets you format a micro-SD card before you use it for the rst time. Space capacity Use Available 3.0GB 2.0GB To format a micro-SD card: Insert the card into the WiFi cameras micro-SD card slot. Then press the Format SD card button at the bottom of the Camera info page. Delete Camera Delete Camera (App only) If youve tried all of the troubleshooting solutions to solve a problem, and nothing seems to work, you might need to reset the WiFi camera and App to their factory settings and start setup again. WARNING: Delete camera erases all of your custom settings. You will have to set up the WiFi camera from scratch. 24 4. TROUBLESHOOTING / FAQS Most issues with the Project Nursery baby monitoring system can be solved by following one of the troubleshooting tips below. For additional assistance, please call 1-844-393-7338. WiFi Issues I cant connect the WiFi camera to my network.

+ Make sure your phone or tablet is connected to the WiFi network you want to use.

+ Make sure the camera is getting a good signal from your WiFi router. See page xx for more information.

+ Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi.

+ Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method.

+ Make sure that there is no MAC lter on router or add MAC address to router whitelist.

+ Reset the camera to set up connection again. Press and hold SET key for 10 seconds. The camera will give a long beep when it is fully reset. The WiFi cameras indicator light remains red (connection to network failed).

+ Double check that youve entered the correct password for your WiFi network in the Project Nursery App.

+ Test your WiFi network with other devices to make sure its working.

+ Make sure the camera is getting a good signal from your WiFi router. See page xx for more information.

+ Make sure that Wi-Fi signal is 2.4GHz. The Project Nursery WiFi camera does not support 5GHz WiFi.

+ Make sure that your WiFi router uses either WPA2-PSK/WPA-PSK or AES as its encryption method. Camera Issues The WiFi cameras indicator light ashes green.

+ The camera is being actively viewed. g n i t o o h s e l b u o r T 25 I dont see video from the camera on my phone/tablet.

+ Make sure the camera is turned on and that it has enough charge or is plugged in to a working outlet.

+ Make sure the camera is within range of your WiFi router (certain kinds of signal obstacles, like large metal objects, might shorten the range somewhat).

+ Make sure your phone/tablet has an active data or WiFi connection and that the Project Nursery App is open and congured with the camera. I cant record video or pictures on the camera (for motion or sound alerts).

+ Make sure you have an Micro SD card (included) inserted in the MICRO SD card slot on the side of the camera.

+ Make sure auto-record is set to on and a motion or sound alert is set. App Issues I cant record video or pictures on my phone/tablet.

+ Make sure your phone/tablet has enough available memory to record video or pictures. My video feed is frozen.

+ Check the time stamp on the video feed screen to make sure the video is frozen. Then return to the camera home screen and reload that camera again.

+ Close the app and re-open. I cant pan/tilt the camera from my phone or tablet.

+ Make sure youre swiping on the video from the camera on your phone or tablet. Pan and tilt the camera by swiping on the screen left/right or up/down. Zoom the camera by double-tapping the screen.

+ Make sure the camera is moving freely. In certain positions, the camera might bump into the stand neck. If the neck is in the way, pan or tilt the camera in the other direction so that you have a free range of movement. The App is frozen.

+ Force close the App on your phone or tablet. Then re-open it. T r o u b l e s h o o t i n g 26 I cant hear sounds from babys room.

+ Make sure the volume on your phone or tablet is turned up.

+ Make sure sound is turned on in the Camera view screen.

+ Make sure the microphone on the camera is not blocked. The microphone is just below the lens. The lullabies/sounds arent playing.

+ If you have multiple cameras, make sure youve chosen the one you want the lullabies to play on before you start the lullaby. Go to the Home screen and choose the camera you want. Then go to Settings, then Music and select an option to play. The temperature alerts dont work.

+ Make sure youve set the temperature preference to the system you use, Fahrenheit (standard in the US) or Celsius (standard outside the US). To switch your temperature preference, go to Settings > Temperature alarm.

+ Make sure youve set the right kind of temperature alertfor example, if you want to make sure your babys room does not get below 68 degrees Fahrenheit, set the Low Temperature Alert to 68. If you want to make sure your babys room doesnt get above a certain temperature, set the High Temperature Alert to that temperature. Motion alerts dont work.

+ You might need to adjust the sensitivity of the alertsfor example, if Motion detection is set to Low, the monitor will not come on as often as when Motion detection is set to Medium or High. To adjust this setting, go to Settings > Motion detection.

+ If you have multiple cameras, you might need to set an alert for the camera youre usingmotion alerts need to be set separately for each camera.

+ The App gives a maximum of 2 notications every 4 minutes. Sound alerts dont work.

+ You might need to adjust the sensitivity of the alertsfor example, if Sound detection is set to Low, the monitor will not come on as often as when Sound detection is set to High. To adjust this setting, go to Settings > Sound detection.

+ If you have multiple cameras, you might need to set an alert for the camera youre usingsound alerts need to be set separately for each camera.

+ The App gives a maximum of 2 notications every 4 minutes. g n i t o o h s e l b u o r T 27 Id like to stop sharing the camera view with a friend/family member.

+ Go to the Settings menu in the Project Nursery App on your phone/tablet and select Delete camera at the bottom of the menu. This will stop all sharing, but youll need to set up the camera again on your phone. Id like to give someone full access to my camera (including settings).

+ Guess accounts have limited access to settings. If you want to give someone full access, you will need to give them your account log-in info and password (not recommended!). I cant access the camera from my computer.

+ The Project Nursery WiFi camera works with the Project Nursery App on iOS and Android devices only. It does not support computers or other mobile device operating systems. I cant open the App on my Android tablet.

+ The Project Nursery App is not compatible with some makes and models of Android tablets. Contact our customer service at 1-844-393-7338 to see if your Android tablet is compatible with the Project Nursery App. Parent Monitor Issues I dont see video from the camera on my monitor.

+ Make sure your monitor is turned on (press the Power button). If it is, press the VIDEO ON/OFF button

(VIDEO on the mini monitor) to make sure the monitors display is awake. Make sure the camera is plugged in to a working outlet and turned on. icon on the screen. I see the

+ Make sure the camera youre trying to view is plugged in to a working outlet and turned on.

+ Make sure the monitor is on the same WiFi network as the camera was set up on in the App. I cant record video or pictures.

+ Make sure you have an Micro SD card (included) inserted in the MICRO SD card slot on the side of the camera. I cant pan/tilt the camera from my monitor.

+ Make sure youre in pan modepress and hold OK/ZOOM until you see arrows on the monitor display. Then use the arrows or joystick to pan the camera.

+ Make sure youre not zoomed in on the imagepress OK/ZOOM to zoom out if you are. Then press and hold OK/ZOOM to enter pan mode. T r o u b l e s h o o t i n g 28

+ Make sure the camera is moving freely. In certain positions, the camera might bump into stand neck. If the neck is in the way, pan or tilt the camera in the other direction so that you have a free range of movement. I cant hear sounds from babys room.

+ Make sure the monitor is turned up. Press the VOL+ button until you hear sounds from your babys room.

+ Make sure the microphone on the camera is not blocked. The microphone is just above the lens. The lullabies arent playing.

+ If you have multiple cameras, make sure youve chosen the one you want the lullabies to play on before you start the lullaby. Go to Cameras > Select Camera and choose the camera you want. Then go to Lullabies and select an option to play. The temperature alerts dont work.

+ Make sure youve set the temperature preference to the system you use, Fahrenheit (standard in the US) or Celsius (standard outside the US). To switch your temperature preference, go to Settings > Temperature.

+ Make sure youve set the right kind of temperature alertfor example, if you want to make sure your babys room does not get below 68 degrees Fahrenheit, set the Low Temp Temperature Alert to 68. If you want to make sure your babys room doesnt get above a certain temperature, set the High Temp Temperature Alert to that temperature. Motion alerts dont work.

+ You might need to adjust the sensitivity of the alertsfor example, if Motion Activated Video is set to ON:

Low, the monitor will not come on as often as when Motion Activated Video is set to ON: Medium or ON:

High. To adjust this setting, go to Motion/Alerts > Motion Activated Video.

+ If you have multiple cameras, you might need to change the active cameramotion alerts work for the active camera only. Press VIDEO ON/OFF (VIDEO on the mini monitor) to make sure the camera you want to use for motion alertsthe one with the clearest view of your baby, for exampleis the one displayed. Sound alerts dont work.

+ You might need to adjust the sensitivity of the alertsfor example, if Sound Activated Video is set to ON:

Low, the monitor will not come on as often as when Sound Activated Video is set to ON: Medium or ON:

High. To adjust this setting, go to Motion/Alerts > Sound Activated Video.

+ If you have multiple cameras, you might need to change the active camerasound alerts work for the active camera only. Press VIDEO ON/OFF (VIDEO on the mini monitor) to make sure the camera you want to use for sound alertsthe one closest to your baby, for exampleis the one displayed. g n i t o o h s e l b u o r T 29 2017 Voxx Accessories Corp. 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268 PNMDUAL5 IB 00

IMPORTANT INFORMATION for Project Nursery PNMDUAL5 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING:

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. Baby Unit SET UP & USE:

Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand. NEVER place the Baby Unit or cords within the crib. Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away). For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. The power unit for this device should be plugged in so that it stays vertical or lies flat. WARNING This digital video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the Users Guide, safe to use. Therefore, always read the instructions in this Users Guide carefully before using the device. Adult assembly is required. Keep small parts away from children when assembling. This product is not a toy. Do not allow children to play with it. This Baby Monitor is not a substitute for responsible adult supervision. Keep this Users Guide for future reference. Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away) Keep the cords out of reach of children. Do not cover the Baby Monitor with a towel or blanket. Never use extension cords with power adapters. Only use the power adapters provided. Test this monitor and all its functions so that you are familiar with it prior to actual use. Do not use the Baby Monitor near water. Do not install the Baby Monitor near a heat source. Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device. Do not touch the plug contacts with sharp or metal objects. CAUTION The Unit shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 8 inches (20 cm) or more. The camera should be installed and operated with a minimum distance of 20cm between the radiator and your body. The USB Port is for charging only. Ecology At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, users guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. Keep the Baby Monitor away from hot, humid areas or strong sunlight, and dont let it get wet. Every effort has been made to ensure high standards of reliability for your Baby Monitor. However, if something does go wrong, please do not try to repair it yourself - contact Customer Service for assistance. FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B) Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No.: _____________________________________________________________________ Purchase Date: _________________________________________________________________ Dealer/Address/Phone: ___________________________________________________________ 12 Month Limited Warranty Voxx Accessories Corporation (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Companys option) without charge for parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. For the location of the nearest warranty station to you, call toll-free to our control office:

1-844-393-7338. This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The warranty does not extend to the elimination of externally generated static, noise, or loss of range or audio/video quality due to external factors, to costs incurred for the installation, removal or reinstallation of the product, or to damage to digital media devices or memory. The warranty does not apply to any product or part thereof which, in the opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product or by removal or defacement of factory serial number/barcode labels. THE EXTENT OF THE COMPANYS LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANYS LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state/

province to state/province. 2017 Voxx Accessories Corp. For customer service, call 1-844-393-7338 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268 PNMDUAL5 Safety/Warranty 03 INFORMATIONS IMPORTANTES pour Project Nursery PNMDUAL5 AVERTISSEMENT Mise en garde : Afin de rduire les risques de choc lectrique, ne pas RISQUE DE CHOC LECTRIQUE enlever le couvercle (ou larrire). Aucune pice interne ne peut tre rpare par lutilisateur. Confier la rparation un personnel de service qualifi. NE PAS OUVRIR. AVERTISSEMENT :

Risque dtranglement

: Des enfants se sont TRANGLS avec des cordons. Garder ce cordon hors de porte des enfants [ plus de 1 m]. Ne jamais utiliser de rallonge lectrique avec les adaptateurs c.a.. Nutiliser que les adaptateurs c.a. fournis. PARAMTRAGE ET UTILISATION de lappareil pour bb :

Dterminer lemplacement de lappareil pour bb qui donne la meilleure vue de bb dans son berceau. Poser lappareil pour bb sur une surface plane, comme un buffet, un bureau ou une tagre, ou fixer la camra sur un mur laide des orifices en forme de trou de serrure sur le support. NE JAMAIS placer lappareil pour bb ou les cordons dans le berceau. Ne pas placer lappareil pour bb ou les cordons dans le berceau ou porte du bb [lappareil et les cordons doivent tre loigns plus de 1 m]. Pour lQUIPEMENT ENFICHABLE, la prise secteur doit tre installe prs de lquipement et tre facile daccs. Lunit dalimentation de cet appareil doit tre branche de manire rester en position verticale ou plat. AVERTISSEMENT Ce moniteur vido numrique pour bb est conforme toutes les normes pertinentes relatives aux champs lectromagntiques et son utilisation est scuritaire lorsquil est manipul comme indiqu dans le guide de lutilisateur. Par consquent, toujours lire attentivement les instructions contenues dans le guide de lutilisateur. Lassemblage par un adulte est ncessaire. Garder les petites pices hors de porte des enfants lors de lassemblage. Ce produit nest pas un jouet. Ne pas permettre aux enfants de jouer avec. Ce moniteur pour bb ne constitue pas un substitut la surveillance par un adulte responsable. Conserver le prsent guide de lutilisateur titre de rfrence future. Ne pas placer lappareil pour bb ou les cordons dans le berceau ou porte du bb [lappareil et les cordons doivent tre loigns plus de 1 m (3 pi)]. Garder les cordons hors de porte des enfants. Ne pas recouvrir le moniteur pour bb avec une serviette ou une couverture. Ne jamais utiliser des rallonges lectriques avec des adaptateurs dalimentation. Nutiliser que les adaptateurs c.a. fournis. Essayer ce moniteur ainsi que toutes ses fonctions et se familiariser avec lui avant son utilisation effective. Ne pas utiliser le moniteur pour bb proximit de leau. Ne pas installer le moniteur pour bb proximit dune source de chaleur. AVERTISSEMENT Lappareil doit tre install et utilis de telle sorte que les parties du corps de lutilisateur autre que les mains soient maintenues une distance denviron 20 cm (8 po) ou plus. La camra doit tre installe et utilise en respectant une distance minimale de 20 cm entre le radiateur et le corps. Le port USB est uniquement affect la recharge. cologie la fin du cycle de vie du produit, celui-ci ne doit pas tre jet avec les ordures mnagres. Emmener ce produit un point de recyclage de matriels lectriques et lectroniques. Le symbole sur le produit, sur le guide de lutilisateur et/ou lemballage indique cette obligation. Certains des matriaux du produit peuvent tre rutiliss sils sont achemins vers un point de recyclage. La rutilisation de certaines pices ou matires premires des produits usags contribue de manire importante la protection de lenvironnement. Veuillez contacter les autorits locales au cas o vous avez besoin de plus dinformations sur les points de collecte dans votre rgion. liminer la batterie dune manire respectueuse de lenvironnement conformment la rglementation locale. Nettoyage Nettoyer le moniteur pour bb avec un chiffon lgrement humide ou avec un chiffon antistatique. Ne jamais utiliser dagent de nettoyage ou de solvants abrasifs. Nettoyage et entretien Ne pas nettoyer toute partie du produit avec des diluants ou dautres solvants et produits chimiques - cela peut causer des dommages permanents au produit qui ne sont pas couverts par la garantie. Garder le moniteur pour bb lcart de zones chaudes et humides ou fortement ensoleilles, et ne pas le laisser se mouiller. Tous les efforts ont t accomplis pour garantir des normes leves de fiabilit pour votre moniteur pour bb. Toutefois, si quelque chose ne fonctionne pas, ne pas essayer de le rparer soi-mme - contacter le Service la clientle pour assistance Rglementations FCC et IC FCC Partie l5 REMARQUE : Cet quipement a t soumis des essais et a t dclar conforme aux limites stipules pour un appareil numrique de classe B, conformment aux spcifications de la partie 15 du rglement de la Federal Communications Commission (FCC). Ces limites ont pour but dassurer une protection raisonnable contre le brouillage nuisible dans une installation rsidentielle. Cet quipement produit, utilise et peut dgager une nergie de frquence radio et, sil nest pas install et utilis conformment aux instructions, il peut causer des interfrences nuisibles aux communications radio. Cependant, il est impossible de garantir quaucun brouillage ne se produira dans une installation particulire. Si cet quipement provoque effectivement du brouillage nuisible la rception de la radio ou de la tlvision, ce qui peut tre dtermin en teignant et rallumant lquipement, lutilisateur est invit essayer de corriger le brouillage par une ou plusieurs des mesures suivantes :

Rorienter ou dplacer lantenne de rception. Augmenter la distance sparant lquipement du rcepteur. Brancher lquipement sur une prise dont le circuit est diffrent de celui o est branch le rcepteur. Consulter le revendeur ou un technicien expriment de radio/tlvision. Des cbles blinds doivent tre utiliss avec cet appareil pour se conformer aux limitations de la classe B du rglement de la FCC. Les changements ou modifications apportes cet quipement non expressment approuvs par la partie responsable de la conformit pourraient annuler lautorisation de lutilisateur dutiliser cet quipement. Cet appareil est conforme la partie 15 de la rglementation de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer de brouillage prjudiciable et

(2) cet appareil doit accepter tout brouillage reu, y compris le brouillage susceptible de provoquer un fonctionnement indsirable. La confidentialit des communications peut ne pas tre assure lors de lutilisation de cet appareil. Afin dassurer la scurit des usagers, la FCC a tabli des critres pour la quantit dnergie de radiofrquence qui peut tre absorbe sans danger par un utilisateur ou un tiers selon lutilisation prvue du produit. Cet quipement a t soumis des essais et a t dclar conforme aux critres de la FCC. Industrie Canada Cet appareil est conforme aux normes dexemption de licence RSS dIndustrie Canada : son fonctionnement est assujetti aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer de brouillage prjudiciable et (2) cet appareil doit accepter tout brouillage reu, y compris le brouillage susceptible de provoquer un fonctionnement indsirable. Le terme IC: avant le numro de certification / denregistrement signifie seulement que les spcifications techniques dIndustrie Canada ont t respectes. Ce produit est conforme aux spcifications techniques applicables dIndustrie Canada. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet appareil numrique de la classe B est conforme la norme ICES-003 du Canada. CAN ICES-3 (B)/NMB-3 (B) Informations sur le produit Conserver la facture comme preuve dachat, ainsi que pour obtenir des pices et toute rparation couverte par la garantie. Attacher la facture ici et inscrire le numro de srie et de modle comme rfrence en cas de besoin. Ces numros se trouvent sur le produit. Modle n : ____________________________________________________________________ Date dachat : __________________________________________________________________ Adresse/tlphone du revendeur : __________________________________________________ Garantie limite de 12 mois Voxx Accessories Corporation (l Entreprise ) garantit lacheteur au dtail dorigine de ce produit que si, dans les 12 mois suivant la date dachat dorigine, ce produit ou lune quelconque de ses pices, sous rserve dutilisation et de conditions normales, prsente un ou des dfauts de matriau ou de fabrication, ce ou ces dfauts feront lobjet dune rparation ou dun remplacement avec un produit reconditionn ( la discrtion de lEntreprise) sans frais pour les pices et pour la main-duvre. Pour obtenir une rparation ou un remplacement en vertu des termes de la garantie, le produit doit tre livr avec preuve de couverture de garantie (cest--dire une preuve dachat date), une description du ou des dfauts, et les frais de transport pays davance, un centre de rparation agr. Pour connatre lemplacement du centre de rparation le plus proche de chez vous, veuillez appeler sans frais notre bureau de contrle au : 1-800-645-7338. La prsente garantie ne peut pas tre transfre et ne couvre pas les produits achets, rpars ou utiliss lextrieur des tats-Unis ou du Canada. La prsente garantie ne couvre ni llimination de llectricit statique gnre de manire externe, ni la perte de porte ou la dtrioration de la qualit audio/vido due des facteurs externes, ni les frais encourus pour linstallation, lenlvement ou la rinstallation du produit, ni les dommages causs aux appareils multimdias numriques ou la mmoire. La garantie ne sapplique pas tout produit ou toute pice du produit qui selon lavis de lEntreprise, a subi des dommages suite une altration, une installation incorrecte, une manipulation incorrecte, une mauvaise utilisation, une ngligence, un accident ou une exposition de lhumidit. La prsente garantie ne couvre pas les dommages occasionns par un adaptateur c.a. non fourni avec le produit ni par lenlvement ou la dgradation des tiquettes de numro de srie/codes-barres dusine. LTENDUE DE LA RESPONSABILIT DE LENTREPRISE EN VERTU DE LA PRSENTE GARANTIE EST LIMITE LA RPARATION OU AU REMPLACEMENT INDIQUS CI-DESSUS ET, EN AUCUN CAS, LA RESPONSABILIT DE LENTREPRISE NE PEUT DPASSER LE PRIX DACHAT PAY PAR LACHETEUR POUR LE PRODUIT. La prsente garantie remplace toute autre garantie ou responsabilit expresse. TOUTE GARANTIE IMPLICITE, INCLUANT TOUTE GARANTIE IMPLICITE DE QUALIT MARCHANDE OU DADAPTATION UN USAGE PARTICULIER EST LIMITE LA DURE DE LA PRSENTE GARANTIE. TOUTE ACTION POUR VIOLATION DE TOUTE GARANTIE MENTIONNE DANS LES PRSENTES, INCLUANT TOUTE GARANTIE IMPLICITE, DOIT TRE PRSENTE DANS LES 24 MOIS SUIVANT LA DATE DE LACHAT DORIGINE. EN AUCUN CAS LENTREPRISE NE PEUT TRE TENUE RESPONSABLE DUN QUELCONQUE DOMMAGE CONSCUTIF OU INDIRECT. Aucune personne ni aucun reprsentant nest autoris assumer pour lEntreprise une quelconque responsabilit autre que celle exprime dans les prsentes en relation avec la vente de ce produit. Certaines juridictions nautorisent pas de limites quant la dure dune garantie implicite ou quant lexclusion ou la limitation de dommages indirects ou conscutifs; les limitations et exclusions indiques dans les prsentes pourraient donc ne pas sappliquer votre cas. La prsente garantie vous donne des droits lgaux spcifiques et vous pourriez galement bnficier dautres droits qui varient selon ltat, de province tat, selon la province. 2017 Voxx Accessories Corp. 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268 Pour le service la clientle, composer le 1-844-393-7338. INFORMACIN IMPORTANTE para Project Nursery PNMDUAL5 ATENCIN RIESGO DE CHOQUE ELCTRICO. NO ABRIR. Atencin: Para reducir el riesgo de un choque elctrico, no retire la tapa

(ni la parte posterior). No contiene piezas que el usuario pueda reparar. Slo personal de servicio calificado puede hacer reparaciones. ADVERTENCIA:

Peligro de estrangulacin:

Los nios se han ESTRANGULADO con cables. Mantenga este cable fuera del alcance de los nios

(ms de 3 pies (1 m) de distancia). Nunca use cables de extensin con adaptadores de CA. Use slo los adaptadores de CA suministrados. CONFIGURACIN Y USO de la Unidad de Beb Determine un lugar para la Unidad de Beb que le brinde la mejor vista de su beb en su cuna. Coloque la Unidad de Beb sobre una superficie plana, tal como un vestidor, escritorio o un estante, o monte la Unidad en una pared de forma segura usando las ranuras de montaje que estn debajo del soporte. NUNCA coloque la Unidad de Beb ni los cables dentro de la cuna. No coloque la Unidad de Beb ni los cables en la cuna o al alcance del beb (la unidad y los cables debern estar a ms de 3 pies (1 m) de distancia). Para EQUIPO ENCHUFABLE, el conector-tomacorriente debe instalarse cerca del equipo y ser de fcil acceso. La unidad de alimentacin para este dispositivo debe enchufarse de manera que permanezca en posicin vertical o plana. ADVERTENCIA El Monitor de Beb con video digital cumple con todas las normas pertinentes que conciernen a campos electromagnticos y es seguro para usar cuando se maneja como se describe en la Gua del Usuario. Por tanto, siempre lea cuidadosamente las instrucciones en esta Gua del Usuario antes de usar el dispositivo. Requiere montaje realizado por un adulto. Mantenga las partes pequeas alejadas de los nios cuando realice el montaje. Este producto no es un juguete. No permita que los nios jueguen con este producto. Este Monitor de Beb no es un sustituto para una supervisin responsable por adultos. Guarde esta Gua del Usuario para referencia en el futuro. No coloque la Unidad de Beb ni los cables en la cuna o al alcance del beb (la unidad y los cables debern estar a ms de 3 pies (1 m) de distancia). Mantenga los cables fuera del alcance de los nios. No cubra el Monitor de Beb con una toalla o manta. Nunca use cables de extensin con adaptadores de potencia. Use slo los adaptadores de potencia suministrados. Pruebe este monitor y todas sus funciones para familiarizarse con l antes de su uso real. No use el Monitor de Beb cerca de agua. No instale el Monitor de Beb cerca de una fuente de calor. ATENCIN La unidad debe instalarse y usarse de manera que las partes del cuerpo del usuario aparte de las manos se mantengan a una distancia de aproximadamente 8 pulgadas (20 cm) o ms. La cmara debe instalarse y utilizarse con una distancia mnima de 20 cm entre el radiador y su cuerpo. El puerto USB es para cargar nicamente. Ecologa Al final del ciclo de vida til del producto, usted no debe desechar este producto con los desperdicios domsticos normales. Lleve este producto a un punto de recoleccin para el reciclaje de equipos elctricos y electrnicos. El smbolo en el producto, la gua del usuario y/o la caja indica esto. Algunos de los materiales del producto pueden volverse a usar si usted los lleva a un punto de reciclaje. Al reutilizar algunas partes o materias primas de productos usados, usted hace una contribucin importante para la proteccin del medio ambiente. Pngase en contacto con las autoridades de su localidad en caso que necesite ms informacin sobre los puntos de recoleccin en su rea. Deseche el paquete de bateras de manera respetuosa con el medioambiente, segn los reglamentos de su localidad. Limpieza Limpie el Monitor de Beb con un pao ligeramente hmedo o con un pao antiesttico. Nunca utilice agentes de limpieza ni disolventes abrasivos. Limpieza y cuidado No limpie ninguna parte del producto con diluyentes u otros disolventes y productos qumicos - esto podra causar dao permanente al producto, lo cual no est cubierto por la garanta. Mantenga el Monitor de Beb lejos de reas calientes, hmedas o la luz solar intensa, y no permita que se moje. Se ha hecho todo lo posible para garantizar altos estndares de confiabilidad para su Monitor de Beb. Sin embargo, si algo se malogra, no trate de repararlo usted mismo - comunquese con el Servicio al cliente para solicitar asistencia. Reglamentos de la FCC e IC FCC Parte 15 AVISO: Este equipo ha sido sometido a pruebas y cumple con los lmites de los aparatos digitales de Clase B, de acuerdo con las especificaciones de la Parte 15 de las reglas de la Comisin Federal de Comunicaciones

(FCC). El objetivo de estos lmites es ofrecer una proteccin razonable contra interferencias nocivas en una instalacin residencial. Este equipo genera, utiliza y puede radiar energa de radiofrecuencia y, si no se instala y utiliza de acuerdo con estas instrucciones, puede generar interferencia perjudicial para las radiocomunicaciones. Sin embargo, no se garantiza que no se producir interferencia en una instalacin en particular. Si su equipo causa interferencia perjudicial para la recepcin de radio o televisin, que se puede determinar apagando y encendiendo el equipo, intente corregirla mediante uno o varios de los siguientes procedimientos:

Vuelva a orientar o cambie de lugar la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte este equipo a un tomacorriente en un circuito diferente al que est conectado el receptor. Consulte al distribuidor o a un tcnico experimentado de radio y televisin para solicitar asistencia. Deben utilizarse cables blindados con esta unidad para garantizar el cumplimiento con los lmites de Clase B de la FCC. Los cambios o modificaciones a este equipo no aprobados expresamente por la parte responsable para el cumplimiento podran anular la autoridad del usuario para usar el equipo. Este aparato cumple con la parte 15 de las normas de la FCC. Su funcionamiento est sujeto a las siguientes dos condiciones: (1) este dispositivo no debe causar interferencia nociva y (2) este dispositivo debe aceptar toda interferencia recibida, incluida aqulla que puede causar un funcionamiento no deseado. Es posible que no se pueda garantizar la privacidad de las comunicaciones cuando se utilice este dispositivo. Para garantizar la seguridad de los usuarios, la FCC ha establecido los criterios para la cantidad de energa de radiofrecuencia que puede ser absorbida sin peligro por un usuario o una persona circundante segn el uso del producto para el cual ha sido diseado. Este producto ha sido sometido a pruebas y cumple con los criterios de la FCC. Industria Canadiense Este dispositivo cumple con los estndares RSS que no exigen licencia de la Industria Canadiense: Su funcionamiento est sujeto a las siguientes dos condiciones: (1) este dispositivo no debe causar interferencia, y (2) este dispositivo debe aceptar toda interferencia recibida, incluida aqulla que puede causar un funcionamiento no deseado del dispositivo. El trmino IC: antes del nmero de certificacin/registro slo significa que las especificaciones tcnicas de la Industria Canadiense fueron satisfechas. Este producto cumple con las especificaciones tcnicas aplicables de la Industria Canadiense. Este aparato digital Clase B cumple con la norma canadiense ICES-003. CAN ICES-3(B)/NMB-3(B) Informacin sobre el producto Guarde el recibo como prueba de su compra y presntelo para obtener repuestos o solicitar servicio bajo garanta. Anxelo aqu y anote los nmeros de serie y de modelo para referencia en caso necesario. Estos nmeros se encuentran en el producto. Nmero de modelo: _____________________________________________________________ Fecha de compra: _______________________________________________________________ Distribuidor/Direccin/Telfono: ___________________________________________________ Garanta limitada de 12 meses Voxx Accessories Corporation (la Compaa) le garantiza a usted, el comprador original de este producto que si, bajo condiciones y uso normales, se encontrara que este producto o alguna pieza del mismo presenta defectos materiales o de mano de obra dentro de los primeros 12 meses a partir de la fecha de compra original, tales defectos sern reparados o reemplazados con un producto nuevo o renovado (a opcin de la Compaa) sin cargo alguno por las piezas y el trabajo de reparacin. Para obtener los servicios de reparacin o reemplazo dentro de los trminos de esta garanta, el producto se entregar con prueba de cobertura de garanta (por ejemplo, factura con fecha de venta), especificacin de los defectos, transporte prepagado, a una estacin de garanta aprobada. Para ubicar la estacin de garanta ms cercana a su domicilio, llame libre de cargo a nuestra oficina de control al: 1-844-393-7338. Esta Garanta no es transferible y no cubre un producto adquirido, mantenido o utilizado fuera de los Estados Unidos o Canad. La garanta no incluye la eliminacin de esttica o ruido generados externamente, ni la prdida de alcance o de calidad de audio/video debido a factores externos, ni los costos incurridos en la instalacin, retirada o reinstalacin del producto, ni los daos a los dispositivos de medios digitales o a la memoria. La garanta no aplica a ningn producto o pieza que, en opinin de la compaa, haya sufrido daos debido a alteraciones, instalacin inadecuada, abuso, uso indebido, negligencia, accidente o exposicin a la humedad. Esta garanta no aplica a daos ocasionados por un adaptador de CA no suministrado con el producto o por la eliminacin o degradacin de las etiquetas de fbrica de cdigo de barras o nmero de serie. EL ALCANCE DE LA RESPONSABILIDAD DE LA COMPAA BAJO ESTA GARANTA EST LIMITADO A LA REPARACIN O EL REEMPLAZO PROVISTO ARRIBA Y, EN NINGN CASO, DEBER LA RESPONSABILIDAD DE LA COMPAA EXCEDER EL PRECIO DE COMPRA PAGADO POR EL COMPRADOR POR ESTE PRODUCTO. Esta Garanta reemplaza cualesquiera otras responsabilidades o garantas expresas. CUALESQUIERA GARANTAS IMPLCITAS, INCLUYENDO CUALQUIER GARANTA IMPLCITA DE COMERCIABILIDAD O ADAPTABILIDAD PARA UN PROPSITO EN PARTICULAR, ESTARN LIMITADAS A LA DURACIN DE ESTA GARANTA. CUALQUIER ACCIN POR INCUMPLIMIENTO DE CUALQUIER GARANTA EN EL PRESENTE, INCLUYENDO CUALQUIER GARANTA IMPLCITA, DEBER PRESENTARSE DENTRO DE UN PERODO DE 24 MESES A PARTIR DE LA FECHA DE COMPRA ORIGINAL. EN NINGN CASO LA COMPAA SER RESPONSABLE POR DAOS EMERGENTES O INCIDENTALES. Ninguna persona ni representante estn autorizados a asumir, en nombre de la Compaa, ninguna responsabilidad salvo la expresada aqu en conexin con la venta de este producto. Algunos estados/provincias no permiten limitaciones sobre la duracin de una garanta implcita o la exclusin o la limitacin de daos incidentales o emergentes, de modo que es posible que las limitaciones o exclusiones anteriores no apliquen en su caso. Esta Garanta le confiere derechos legales especficos y es posible adems que usted tenga otros derechos que pueden variar segn el estado/provincia. 2017 Voxx Accessories Corp. Para servicio al cliente, llame al 1-844-393-7338 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268 PNMDUAL5 Safety/Warranty 03 PNMDUAL5 Safety/Warranty 03