FCC ID: EW780-2594-00 DECT6.0 Cordless Phone with Bluetooth

Connect the telephone base Connect the charger 9 MUTE/DELETE 13 HOME/FLASH Go to www.vtechphones.com (US) to register your product for enhanced warranty support and latest VTech product news. Go to phones.vtechcanada.com (CA) for latest VTech product news. LS6381 LS6381-2 LS6381-3 LS6381-4 LS6381-5 VS324 VS324-2 VS324-3 VS324-4 VS324-5 Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1. 2. cords. 14. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:

When the power supply cord or plug is DECT 6.0 cordless telephone with BLUETOOTH wireless technology 3. 4. 5. 6. 7. 8. 9. 12. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. CAUTION: Do not install the telephone base at a height above 2 meters. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, or in a wet basement or shower. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other electrical devices. Protect your phone from moisture, dust, corrosive liquids and fumes. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home or office, consult your dealer or local power company. 10. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 11. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 13. Do not overload wall outlets and extension damaged or frayed. If liquid has been spilled onto the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. If the product has been dropped and the telephone base and/or handset has been damaged. If the product exhibits a distinct change in performance. 15. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases

(cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. 18. 17. Only put the handset of your telephone next to your ear when it is in normal talk mode. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. For pluggable equipment, the socket-

outlet shall be installed near the equipment and shall be easily accessible. 19. 20. CAUTION: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used for the handset. Use only the supplied rechargeable batteries or replacement batteries (BT162342/

BT262342) for the handset. Do not dispose of batteries in a fire. They may explode. Do not use the battery in following conditions:

High or low extreme temperature during use, storage or transportation. Replacement of a battery with an incorrect type that can defeat a safeguard. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a batteryin an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that can result in an explosion or the leakage of flammable liquid or gas. 21. Use only the adapter included with this product. Incorrect adapter polarity or voltage can seriously damage the product. SAVE THESE INSTRUCTIONS Battery Use only the batteries provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to phones.vtechcanada.com or call 1 (800) 267-7377. Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling batteries in order not to create a short circuit with conductive materials. Charge the battery provided with this product only in accordance with the instructions and limitations specified in this manual. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients Should keep wireless telephones at least six inches from the pacemaker. Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTRs evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. About cordless telephones Privacy: The same features that make a cordless telephone convenient create some limitations. Telephone calls are transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones. Electrical power: The telephone base of this cordless telephone must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to televisions and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference. Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with conducting material such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. Quick start guide Scan the QR code for support information US US CA Whats in the box 1 Connect and install Quick start guide Introducing Smart call blocker Bluetooth setup guide If you subscribe to digital subscriber line (DSL) high-

speed Internet service through your telephone line, make sure you connect a DSL filter (not included) to the telephone wall jack. THIS SIDE UP / CE CT VERS LE HAUT Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH) WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINRER OU PERCER LES PILES. Made in China / Fabriqu en chine CR2105 1 set for LS6381/VS324 2 sets for LS6381-2/VS324-2 3 sets for LS6381-3/VS324-3 4 sets for LS6381-4/VS324-4 5 sets for LS6381-5/VS324-5 Install the battery THIS SIDE UP 1 2 5 0 1 2 R C

. S T U E

. S L I E P I S

) H R E e T T L n i h N R A M E H E L

i h A S m A E c B n C E R e R u E V 0 0

T R E U P T 3 N U C V E O q i r b 4

. M N a U R F T 2 E S C 4 E

2

s e l i S R 3 T I 2 R O n i N h I C N C P E R a

C p E R 6 2

c T U V

P U E o B A l

2

T B S B A

k 4 G 3 N 2 6 I D c I a S P N N O 1 R N n I i e d a O M P N E S I H y B T D A r e t t W T a B 5 0 1 2 R C

. S T U E

. S L I E P I S e

) H R N R E T T L n i h A M E H E L

i h A S m R E V A E c B n C E R e 0 0

T R E U P T 3 N U C V E O 4

. M N U T 2 E S C 4

2

s P S R I O 3 1 set for LS6381-2/VS324-2 2 sets for LS6381-3/VS324-3 3 sets for LS6381-4/VS324-4 4 sets for LS6381-5/VS324-5 Charge the battery 12 hrs All rights reserved. 12/21. LS6381-X_VS324-X_QSG_V1 2021 VTech Technologies Canada Ltd. 2021 VTech Communications, Inc.|

Specifications are subject to change without notice. Overview Handset display their respective owners. is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of of such marks by VTech Holdings Limited is under license. VTech Holdings Limited The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use STAR label indicating it meets the latest energy efficiency guidelines. environment. We are proud to mark this product with the ENERGY encourages the use of products that save energy and help protect our The ENERGY STAR program (www.energystar.gov) recognizes and the Telecommunications Industry Association. Used under license. cochlear implants. The TIA-1083 Compliant Logo is a trademark of interference when used with most T-coil equipped hearing aids and Telephones identified with this logo have reduced noise and TIA-1083 T Hearing Aid T-Coil Compatible with The handset battery is fully charged. Telephone base 6 7 8 9 HANDSET 1 ECO NEW ANS ON MSG #

10:30PM 10/16 The handset battery is low and needs charging. The handset battery is charging. Handset ringer is off. New voicemail received from your telephone service provider. The entry you are reviewing is new in the caller ID log. Displays when Home line is in use. Bluetooth device is paired and active. Bluetooth device / Cell line is in use. Answering system is on. Handset displays the current message number being played and the total number of new/old messages recorded. The ECO mode activates automatically to reduce power consumption when the handset is within range of the telephone base. Call block: 1000 entries up to 24 digits and 15 characters Caller ID log: 50 memory locations;

up to 30 digits and 15 characters Phonebook: 1000 memory locations;

Memory NEW Charger: 6V DC @ 0.4A Telephone base: 5V DC @ 1A Handset: 2.4V Ni-MH battery Power requirement environmental conditions at the time of use. Actual operating range may vary according to Maximum power allowed by FCC and IC. range Nominal effective 5 Channels Telephone base: 1921.536-1928.448 MHz Handset: 1921.536-1928.448 MHz Transmit frequency Crystal controlled PLL synthesizer Frequency control ANS ON MSG #

10/16 ECO Technical specifications 1 2 3 4 5 After you install your telephone or power returns following a power outage and battery depletion, the handset will prompt you to set the date and time, and to configure the Smart call blocker* and answering system through voice guide. Date and time Follow the steps below to set the date and time. For example, if the date is 25 April, 2022, and the time is 12:05 PM:

Voice guide for Smart call blocker / Answering system After setting the date and time, the handset will prompt if you want to set Smart call blocker, and the answering system. For more details, see Use voice guide to set Smart call blocker in the Introducing Smart call blocker leaflet and Use voice guide to set Answsering system in the online help topics. When the handset prompts you to set up the Smart call blocker via voice guide:

Date: MM/DD/YY Date: 04/2?/- -

Date: 04/25/22 Time: HH:MM - -

Time: 12:05 PM ECO ECO ECO ECO ECO 1 Enter the date. 2 Press SELECT. 3 Enter the time. 4 Press SELECT. Hello! This voice guide will assist you with the basic setup of Smart call blocker Setup your Smart call blocker by inputting the designated numbers as instructed in the voice guide. 6 7 8 9 1 Charging pole 2

(Volume up) Increase the bases speaker/ringer volume.

(Volume down) Decrease the bases speaker/ringer 3 4 volume.

(CELL) Answer a cell call. Flashes quickly when there is an incoming cell call. Flashes slowly when a cell call is on hold. 5

(HOME) Answer a home call. Flashes quickly when there is an incoming home call. Flashes slowly when a home call is on hold.

(PAGE) Page all system handsets.

(CELL 1 / CELL 2 slots) On when the telephone is paired and connected with a Bluetooth device. Flashes alternately while pairing a Bluetooth device.

(Answering system) Turn the built-in answering system on or off.

(MUTE) Mute the microphone during a call. Silence the ringer temporarily while the telephone base is ringing. HANDSET 1 Set date/time ECO ECO 10:30PM 11/20 Press MENU. 1 2 Press or scroll to Set date/time, then press SELECT. to Date: 04/25/22 Time: 10:59 AM 3 Enter the date, then press SELECT. 4 Enter the time, then press SELECT. LCD language setting If you accidentally set the LCD language to Spanish or French, you can change the LCD language back to English while the telephone is not in use:

On the telephone base, press MENU and then enter 364#. 364#. ECO ECO On the handset, press MENU and then enter This feature assists you to do the basic setup of the answering system. You can follow the voice guide to record your own announcement, set the number of rings and the message alert tone. When the handset prompts you to set up the answering system via voice guide:

Voice guide set Smart call blk?

ECO 1 Press MENU on the handset to start voice guide setup. Voice guide to set up Ans sys?

ECO 2 Press MENU on the handset to start voice guide setup. 2 Setup When the handset prompts you to set the date and time:

Follow the following steps to set the date and time if you skipped the prompt. Overview Handset 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4 3 1 2 1 LCD display 1 2 CHARGE light 3 MENU/SELECT Display the menu. Select an item or save an entry or setting while in the menu. VOICE Activate the voice-controlled application of one of the connected cell phones when the system is in idle. Operate Make a home call Press Handset:

- OR -

Enter the phone number. Make a cell call Handset:

Press 2 Enter the phone number. Need help?

Press this key while the system is in idle and has no paired cell phone(s), then the handset will prompt Pair cell first to remind you for remote voice control activation. 5 OFF/CANCEL Hang up a call. Return to the previous menu or idle mode without making changes. Delete digits while predialing. Silence the handset ringer temporarily while the phone is ringing. Erase the missed call indicator while the handset is not in use. OPER 0 Enter space character during text editing. Press and hold to set and turn on the QUIET mode, or turn it off. When reviewing a caller ID log entry, press repeatedly to view other dialing options. CALL BLOCK Block the incoming call when the telephone is ringing. When on a call, press to block the call. Show the Smart call blocker menu when idle. 6 8 7 QUIET #

Mute the microphone during a call. Mute the ringer temporarily when the handset is ringing. Delete an individual entry while reviewing the caller ID log, the phonebook or the redial memory. Delete digits while predialing. Delete the playing message or the recorded announcement during message or announcement playback.

/ pVOLUMEq/ CID Show phonebook entries. Review the caller ID log. Move the cursor to the left or right while entering names or numbers. Increase or decrease the listening volume when on a call, or increase or decrease the message playback volume. 10 11 REDIAL/PAUSE Review the redial list. Insert a dialing pause while dialing or entering numbers into the phonebook. 12 CELL Make or answer a cell call. Answer an incoming cell call when you hear a call waiting alert during a cell call. Call back the caller if the callers number is available during message playback. Make or answer a home call. Answer an incoming home call when you hear a call waiting alert. Call back the caller if the callers number is available during message playback. 1 14 While reviewing a caller ID log entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the phonebook. Press and hold to set or dial your voicemail number. 15 TONE

/ aA Switch to tone dialing temporarily during a call if you have pulse service. Change the next letter to upper or lower case while entering names. 16 Make or answer a home call or cell call using the speakerphone. Turn on or off the handset speakerphone. Answer a home call Handset:

Press

- OR -

Telephone base:

Answer a cell call Handset:

Press

- OR -

Telephone base:

End a home call Handset:

Telephone base:

Press

- OR -

End a cell call Handset:

Press

- OR -

Telephone base:

Volume Handset:

Telephone base:

Press

- OR -

This voice guide will assist you with the basic setup of your answering system For operations and guides to help you using your telephone system, and for latest information and supports, go and check the online help topics and online FAQs. Tap the notification to trigger the redirection of the online help.

If the QR code is not clearly displayed, adjust your cameras focus by moving your device closer or further away until it is clear. Setup your answering system by inputting the designated numbers as instructed in the voice guide.

*Includes licenced QaltelTM technology. QaltelTM is a trademark of Truecall Group Limited. Use your smartphone or mobile device to access our online help. Go to https://help.vtechphones.com/ls6381;

https://help.vtechphones.com/vs324; OR Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the devices camera up to the QR code and frame it. You can also call our Customer Support at 1 (800) 595-9511 [in US] or 1 (800) 267-7377 [in Canada]

for help. US US CA If you subscribe to caller ID service, information about each caller appears after the first or second ring. The caller ID log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15 characters for the name. Review caller ID log entries Save a caller ID log entry to the phonebook When your desired caller ID entry displays on the handset:

Christine Smith 888-883-2445 To Phonebook ECO ECO 10:30PM 11/20 1 Press MENU. 2 Press SELECT to choose To Phonebook. Enter number 888-883-2445 Chris Saved ECO ECO ECO Caller ID HANDSET 1 ECO 1 10:30PM 11/20 1 Press

. Christine Smith 888-883-2445 ECO 10:30PM 11/20 2 Press browse the entries. or to Dial a caller ID log entry When your desired caller ID entry displays on the handset screen:

Christine Smith 888-883-2445 ECO 10:30PM 11/20 Press

- OR -

- OR -

3 Edit the number if needed, then press SELECT. 4 Edit the name if needed, then press SELECT. Delete a caller ID log entry When your desired caller ID entry displays on the handset screen:

Christine Smith 888-883-2445 ECO 10:30PM 11/20 Press MUTE/DELETE. Phonebook Phonebook The phonebook can store up to 1,000 entries, which are shared by all handsets and the telephone base. Each entry may consist of a telephone number up to 30 digits, and a name up to 15 characters. Add a phonebook entry Review phonebook entries HANDSET 1 Christine Smith 888-883-2445 ECO 1 ECO mtres. HANDSET 1 Phonebook Add new entry 10:30PM 11/20 10:30PM 11/20 ECO 1 ECO ECO 1 Press

. 2 Press browse the entries. or to 10:30PM 11/20 1 Press MENU. 2 Press or to scroll to Phonebook, then press SELECT. 3 Press SELECT to select Add new entry. Enter number 888-883-2445 ECO Chris Saved ECO ECO Dial a phonebook entry When your desired phonebook entry displays:

Christine Smith 888-883-2445 ECO Press

- OR -

- OR -

5 Enter the number, then press SELECT. 4 Enter the name, then press SELECT. Delete a phonebook entry When your desired phonebook entry displays:

Christine Smith 888-883-2445 ECO 10:30PM 11/20 1 Press MUTE/DELETE. ECO 2 Press SELECT. Delete entry?

Answering system About the built-in answering system and voicemail service For message recording, your telephone has a built-in answering system, and it also supports voicemail service offered by your telephone service provider (subscription is required, and fee may apply). Built-in answering system VS Voicemail service Built-in answering system Supported by Telephone system Subscription Fees No No Voicemail service Telephone service provider Yes May apply Answer incoming calls After 3 rings by default. It can be changed in the handset or the telephone base menu. Usually after 2 rings. It can be changed by contacting your telephone service provider. Storage Telephone system Server or System Display new messages Handset -

XX new messages Retrieve messages Press MENU, and then select Play messages on the handset; OR Access remotely with an access code. Handset -

or New voicemail Press on the dialpad, and enter an access number from your telephone service provider; OR Press and hold to dial if you have saved the access number. Turn the built-in answering system on or off Message playback HANDSET 1 Play messages Set number of rings HANDSET 1 Answering sys Press Press Telephone base:

Press Handset:

Press to turn on; press again to turn off. ECO 1 ECO 10:30PM 11/20 1 Press MENU. 2 Press or to scroll to Answering sys, then press SELECT. Answer on/off ECO On ECO ECO 1 ECO 10:30PM 11/20 1 Press MENU. 2 Press SELECT to select Play messages. You can set your answering system to answer calls at least two rings earlier than your voicemail service. For example, if your voicemail service answers after six rings, set your answering system to answer after four rings. Thus, if you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message. Options while message playback HANDSET 1 Answering sys Ans sys setup Skip a message Repeat the playing message ECO 1 ECO ECO 10:30PM 11/20 1 Press MENU. 2 Press or to 3 scroll to Answering sys, then press SELECT. Press to or scroll to Ans sys setup, then press SELECT. Play previous message Delete the playing message Press 1 2 Press Delete all messages

# of rings ECO 3 ECO HANDSET 1 Answering sys Delete all old ECO 1 ECO ECO 4 Press or to 5 Press scroll to # of rings, then press SELECT. or to scroll to desired number of rings, then press SELECT. 3 or Press to scroll to Answer on/off, then press SELECT. 3 Press or to scroll to On or Off, then press SELECT to confirm. 10:30PM 11/20 1 Press MENU. 2 Press or to scroll to Answering sys, then press SELECT. 3 to Press or scroll to Delete all old, then press SELECT. NOTE You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6 rings; or Toll saver. If you choose Toll saver, the answering system answers a call after two rings when you have new messages, or after four rings when you have no new messages. This enables you to check for new messages and avoid paying unnecessary long distance charges if you are calling from outside your local area. For C-UL compliance only Mesures de scurit importantes Afin de rduire les risques dincendie, de blessures corporelles ou dlectrocution, suivez toujours ces mesures prventives de base lorsque vous utilisez votre tlphone :

1. Lisez et comprenez bien toutes les instructions. 2. Observez toutes les instructions et mises en garde inscrites sur lappareil. 3. Dbranchez ce tlphone de la prise murale avant de le nettoyer. Nutilisez pas de nettoyeurs liquides ni en arosol. Nutilisez quun chiffon doux et lgrement humect. 4. ATTENTION: Ne pas installer le socle tlphonique une hauteur suprieure 2 5. Nutilisez pas ce produit prs de leau, tel que prs dun bain, dun lavabo, dun vier de cuisine, dun bac de lavage ou dune piscine, ou dans un sous-sol humide ou sous la douche. 6. Ne dposez pas ce tlphone sur un chariot, support ou table chancelants. Lappareil pourrait tomber et tre srieusement endommag. vitez dinstaller le systme tlphonique dans les endroits soumis une temprature extrme, la lumire directe du soleil ou proximit immdiate dautres appareils lectriques ou lectroniques. Protgez votre tlphone contre les sources dhumidit, la poussire, les vapeurs et les liquides corrosifs. 7. 8. Le botier de lappareil est dot de fentes et douvertures daration situes larrire ou en dessous. Afin dempcher la surchauffe, ces ouvertures ne doivent pas tre obstrues en plaant lappareil sur un lit, divan, tapis ou autre surface similaires. Ne placez pas cet appareil proximit dun lment de chauffage ni dune plinthe lectrique. De plus, ne linstallez pas dans une unit murale ou un cabinet ferm qui ne possde pas daration adquate. 9. Ne faites fonctionner cet appareil quavec le type dalimentation indiqu sur les tiquettes de lappareil. Si vous ne connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur dlectricit. 10. Ne dposez rien sur le cordon dalimentation. Installez cet appareil dans un endroit scuritaire, l o personne ne pourra trbucher sur la ligne dalimentation ni le cordon tlphonique modulaire. 11. Ninsrez jamais dobjets travers les fentes et ouvertures de cet appareil, car ils pourraient toucher des points de tension dangereux ou court-circuiter des pices, ce qui constituerait un risque dincendie ou dlectrocution. Nchappez pas de liquides dans lappareil. 12. Afin de rduire les risques dlectrocution, ne dmontez pas lappareil, mais apportez-le plutt un centre de service qualifi sil doit tre rpar. En enlevant le couvercle, vous vous exposez des tensions dangereuses ou autres dangers similaires. Un remontage inadquat peut tre lorigine dune lectrocution lors dune utilisation ultrieure de lappareil. Dbranchez lappareil avant de procder au nettoyage. Utilisez un chiffon humide et doux. 13. Ne surchargez pas les prises de courant et les rallonges. 14. Dbranchez cet appareil de la prise de courant et communiquez avec le dpartement de service la clientle de VTech dans les cas suivants :

Lorsque le cordon dalimentation est endommag ou corch. Si du liquide a t chapp dans lappareil. Si lappareil a t expos une source dhumidit telle que la pluie ou leau. Si le produit ne fonctionne pas normalement en respectant les instructions de fonctionnement. Rglez uniquement les commandes indiques dans le les instructions de fonctionnement. Les rglages incorrects des autres commandes pourraient provoquer un dommage qui pourrait exiger un travail exhaustif de la part dun technicien autoris afin de rtablir le fonctionnement normal de lappareil. Si le produit a t chapp et que le socle et/ou le combin a t endommag. Si le produit affiche une nette diminution de sa performance. 15. vitez dutiliser un tlphone (autre quun sans fil) pendant un orage. Les clairs peuvent tre lorigine dune lectrocution. 16. Nutilisez pas le tlphone pour rapporter une fuite de gaz proximit de la fuite. En certaines circonstances, une flammche pourrait tre provoque lorsque ladaptateur est branch une prise de courant, ou lorsque le combin est dpos sur le socle. Ceci est un vnement commun associ la fermeture dun circuit lectrique. Lutilisateur ne devrait pas brancher le tlphone une prise de courant, et ne devrait pas dposer le combin charg sur le socle, si le tlphone se trouve proximit dun endroit comportant des concentrations de gaz inflammables, moins que la ventilation soit adquate. Une flammche dans un tel endroit pourrait provoquer un incendie ou une explosion. De tels environnements peuvent comprendre: des endroits o lon utilise de loxygne mdical sans ventilation adquate; des gaz industriels (dissolvants de nettoyage, des vapeurs dessence, etc.); une fuite de gaz naturel, etc. 17. Ne placez que le combin de votre tlphone prs de votre oreille lorsquen mode de conversation. 18. Ces adaptateurs ont t conus pour tre orients en position verticale ou monts au sol. Les broches ne sont pas conues pour maintenir ladaptateur en place si celui-ci est barnch dans une prise au plafond ou sous une table/ armoire. 19. Pour le MATERIEL RACCORDE PAR PRISE DE COURANT, le socle de prise de courant doit etre installe a proximite du materiel et doit etre aisement accessible. 20. MISE EN GARDE: Il peut y avoir un risque dexplosion si vous utilisez le mauvais type de piles pour le tlphone. Nutilisez que les piles rechargeable inclus ou les piles de rechange (BT162342/BT262342). Nincinrez pas les piles. Celles-ci risqueraient dexploser. vite dutiliser la batterie dans les conditions suivantes:

des tempratures extrmes faibles ou leves auxquelles une batterie peut tre soumise pendant lutilisation, le stockage ou le transport;

Remplacement dune batterie par un type incorrect pouvant supprimer une protection;

mise au rebut dune batterie dans un feu ou dans un four chaud, ou crasement mcanique ou coupure dune batterie, susceptible de provoquer une explosion;

maintien dune batterie dans un environnement trs haute temprature pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables;

batterie soumise une pression de lair extrmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables. 21. Nutilisez que les adaptateurs inclus avec ce produit. Lutilisation dun adaptateur dont la polarit ou la tension serait inadquate risque dendommager srieusement le produit et mettre votre scurit en pril. CONSERVEZ CES INSTRUCTIONS Pile Nutilisez que la pile incluse ou lquivalent. Pour commander une pile de recharge, visitez notre site Web au www.vtechphones.com ou composez le 800-595-9511. Au Canada, visitez le phones. phones.vtechcanada.com ou composez le 800-267-7377. Ne jetez pas la pile au feu. Vrifiez les instructions spcifiques de mise aux rebus auprs des autorits locales. Nouvrez pas et ne mutilez pas la pile. Llectrolyte qui sen chapperait est corrosif et pourrait causer des brlures ou des blessures aux yeux ou la peau. Llectrolyte est toxique si aval. Soyez prudents lorsque vous manipulez les piles afin dviter les courts-circuits provoqus par des matriaux conducteurs. Rechargez la pile incluse avec cet appareil, selon les instructions et limites spcifies dans ce guide dutilisation. Stimulateurs cardiaques implants dans lorganisme Les simulateurs cardiaques (sapplique uniquement aux tlphones numriques sans fil) :

Lorganisme Wireless Technology Research, LLC (WTR), une firme de recherche indpendante, a men une valuation pluridisciplinaire des interfrences entre les tlphones sans fil portatifs et les stimulateurs cardiaques implants dans lorganisme. Appuye par lAdministration des aliments et drogues (FDA) des tats-Unis, la firme WTR recommande aux mdecins :

Avis aux dtenteurs de stimulateurs cardiaques Ils doivent tenir le tlphone sans fil une distance dau moins six pouces du stimulateur cardiaque. Ils ne doivent PAS placer le tlphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche. Ils doivent utiliser le tlphone sans fil en lappuyant sur loreille qui se trouve dans la direction oppose au stimulateur cardiaque. Ltude effectue par lorganisme WRS na pas identifi de risque pour les dtenteurs de simulateurs cardiaques causs par les gens qui utilisent un tlphone sans fil proximit de ceux-ci. propos des tlphones sans fil Confidentialit : Les mmes caractristiques qui constituent des avantages pour les tlphones sans fil affichent galement des restrictions. Les appels tlphoniques sont transmis entre le combin sans fil et le socle par le biais dondes radio ; il y a donc la possibilit que vos conversations tlphoniques sans fil soient interceptes par des quipements de rception radio se trouvant dans la porte du combin sans fil. Pour cette raison, vous ne devez pas percevoir les communications tlphoniques sans fil comme tant aussi confidentielles que celles des tlphones cordons. Alimentation lectrique : Le socle de ce tlphone sans fil doit tre branch une prise lectrique fonctionnelle. La prise lectrique ne doit pas tre contrle par un interrupteur mural. Les appels ne pourront pas tre effectus du combin sans fil si le socle est dbranch ou mis hors tension ou si le courant est coup. Possibilit dinterfrences aux tlviseurs : Certains tlphones sans fil fonctionnent sur des frquences pouvant causer des interfrences aux tlviseurs et aux magntoscopes. Pour rduire ou prvenir de telles interfrences, ne placez pas le socle du tlphone sans fil prs ou sur un tlviseur ou magntoscope. Sil y a prsence de parasites, il est conseill dloigner le tlphone sans fil du tlviseur ou du magntoscope afin de rduire possiblement les interfrences. Piles rechargeables : Manipulez les piles avec soin afin de ne pas les court-circuiter avec des bagues, bracelets ou cls. Les piles ou le conducteur peut surchauffer et causer des blessures. Respectez la polarit adquate entre la pile et le chargeur. Les bloc-piles rechargeables lhydrure mtallique de nickel : Jetez ces blocs-piles de manire cologique et scuritaire. Ne les incinrez pas et ne les percez pas. Tel que les autres piles de ce type, elles pourraient dgager une matire toxique qui peut causer des blessures corporelles si elles sont brles ou perces. This Class B digital apparatus complies with Canadian requirement:

CAN ICES-3 (B)/NMB-3(B). FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request. The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line. See the installation instructions in the users manual. The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US:

in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider. This equipment must not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Replacement to this telephone equipment can only be made by the manufacturer or its authorized agents. For replacement procedures, follow the instructions outlined under the Limited warranty. If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled. To activate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged batteries before proceeding. 2. While you press and hold

, plug the telephone base power adapter back to the power outlet. 3. After about 20 seconds, when the and then press it again within two seconds. You hear a confirmation tone. The light turns off and all handsets display To register HS... see manual alternately. Allow up to one minute for the process to complete. light starts flashing, release If the phone fails to enter this mode, repeat all the steps mentioned above. The telephone base will be powered up as normal if you fail to press in Step 3. within two seconds To deactivate the CEC battery charging testing mode:

1. Unplug the telephone base power adapter from the power outlet, and then plug it back in. Then the telephone base is powered up as normal. 2. Put the handsets on the telephone base cradle to begin registration. 3. The handset shows Registering... If the registration is successful, the handset screen displays Registered and beeps. The handset is registered with the telephone base. Limited Warranty What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase

(Consumer or you) that the Product and all accessories provided in the sales package

(Product) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (Materially Defective Product)?

During the limited warranty period, VTechs authorized service representative will replace at VTechs option, without charge, a Materially Defective Product. If we replace the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Replacement of the Product, at VTechs option, is your exclusive remedy. VTech will return the replacement Products to you in working condition. You should expect the replacement to take approximately 30 days. How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the replacement Product for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer. What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion. Product that has been subjected to contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like; but then only to the extent the damage was not caused by incorrectly securing the waterproof handsets protective elements, for example, failing to properly close a seal), or such protective elements are damaged or missing (e.g. a cracked battery door), or subjecting a Product to conditions beyond its stated specifications or limits (e.g. 30 minutes in 1 meter of fresh water). Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech;

Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems;

Product to the extent that the problem is caused by use with non-VTech accessories;

Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible;

Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes

(including but not limited to Products used for rental purposes);

Product returned without a valid proof of purchase (see item 2 below); or Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. 2. 3. 4. 5. 6. 7. 8. 9. How do you get warranty service?

To obtain warranty service in the United States of America, please visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to phones.vtechcanada.com or dial 1 (800) 267-7377. The RBRC seal The RBRC seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The program provides a convenient alternative to placing used nickel-

metal hydride batteries into the trash or municipal waste, which may be illegal in your area. VTechs participation makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY for information on Ni-MH battery recycling and disposal bans/

restrictions in your area. VTechs involvement in this program is part of its commitment to protecting our environment and conserving natural resources. The RBRC Seal and 1 (800) 8 BATTERY are registered trademarks of Call2recycle, Inc. FCC, ACTA and IC regulations FCC Part 15 NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission

(FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone. To ensure safety of users, the FCC/ISEDC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC/ISEDC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. 2. 3. NOTE: Before calling for service, please review the users manual - a check of the Products controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of replacement prior to any further replacement activity. You must pay for the cost of replacement and return shipping costs for the replacement of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and Include a valid proof of purchase (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and Provide your name, complete and correct mailing address, and telephone number. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTechs responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please retain your original sales receipt as proof of purchase Disclaimer and Limitation of Liability VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this users manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS211119-59628E-RF FCC ID Label Label 1 Label 2 FCC ID Label Location Information Label 1 Label 2 The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: Michael_Tsui@vtech.com FCC Confidential Authorization Date: 2021/12/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EW780-2594-00 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, VTech Telecommunications Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: Michael_Tsui@vtech.com FCC Authorization Date: 2021/12/31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, VTech Telecommunications Ltd, the undersigned, Hereby authorizes Shenzhen Accurate Technology Co., Ltd.to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, This authorization is valid until further written notice from the applicant. 21 U.S.C. 862. Sincerely Yours, Signature Michael Tsui Approbation Supervisor QA-FR-170-B

VTech Telecommunications Ltd Dec. 02, 2021 To whom it may concern, FCC-Multiple Models Confirmation Letter I, the undersigned, hereby confirm that the family models are listed in the following table. These models are identical as follows:

Electrical designs, including software & firmware PCB layout Others, please specify Construction design/Physical design/Enclosure The only differences between these models are the follows for marketing purpose:

Color Trade name Others, please specify Package type, no. of Handset and Charger. Cosmetic details Model number Suffix ( X,Y, Z) represents Color code Others, please specify Packing configuration Z= any alphanumeric character is presenting different package type (material). X= any alphanumeric character or blank is presenting number of Handset and extra Charger. Y= any alphanumeric character or blank is presenting different color of enclosure. X,Y,Z

) are identical in:

,but models with suffix (

Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify For the product subject to authorization under FCC Declaration of Conformity:

In addition, it is to confirm that all the below information 1) The U.S. responsible party, 2) FCC label artworks and location, 3) FCC required statement in the user manual Are the same but different in the following model numbers only:

Package type, no. of Handset and Charger. Item # New Model Model Number YES YES YES YES YES YES YES YES YES YES LS6381 LS6381-2 LS6381-3 LS6381-4 LS6381-5 LS638Z-XY LS6300 LS630Z-XY VS324 VS324-2 Trade Name vtech vtech vtech vtech vtech vtech vtech vtech vtech vtech Remarks 1 base + 1 handset 1 base + 2 handsets + 1 charger 1 base + 3 handsets + 2 chargers 1 base + 4 handsets + 3 chargers 1 base + 5 handsets + 4 chargers 1 base + X handsets + (X-1) chargers 1 handset + 1 charger 1 handset + 1 charger 1 base + 1 handset 1 base + 2 handsets + 1 charger 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 YES YES YES YES YES YES VS324-3 VS324-4 VS324-5 VS324-XY VS324-0 VS324-0Y VTech Telecommunications Ltd 1 base + 3 handsets + 2 chargers 1 base + 4 handsets + 3 chargers 1 base + 5 handsets + 4 chargers 1 base + X handsets + (X-1) chargers 1 handset + 1 charger 1 handset + 1 charger vtech vtech vtech vtech vtech vtech The sample(s) being submitted to Shenzhen Accurate Technology Co., Ltd. for conformity assessment is LS6381-2 of the above list. All above model's FCC ID: EW780-2594-00 Regards, Michael Tsui Approbation Supervisor vtech 1 handset + 1 charger