FCC ID: Q6G-AP332CR Wireless Access Point

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6148756.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case WatchGuard AP332CR Hardware Guide WatchGuard AP332CR Outdoor Access Point WatchGuardTechnologies,Inc. 2 About This Guide Information in this guide is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of WatchGuard Technologies, Inc. Guide revised: 7/11/2022 Copyright, Trademark, and Patent Information Copyright 1998 2022 WatchGuard Technologies, Inc. All rights reserved. All trademarks or trade names mentioned herein, if any, are the property of their respective owners. Complete copyright, trademark, patent, and licensing information can be found in the Copyright and Licensing Guide, available online at https://www.watchguard.com/wgrd-help/documentation/overview. About WatchGuard WatchGuard Technologies, Inc. is a global leader in network security, providing best-in-class Unified Threat Management, Next Generation Firewall, secure Wi-Fi, and network intelligence products and services to more than 75,000 customers worldwide. The companys mission is to make enterprise-grade security accessible to companies of all types and sizes through simplicity, making WatchGuard an ideal solution for Distributed Enterprises and SMBs. WatchGuard is headquartered in Seattle, Washington, with offices throughout North America, Europe, Asia Pacific, and Latin America. To learn more, visit WatchGuard.com. For additional information, promotions and updates, follow WatchGuard on Twitter, @WatchGuard on Facebook, or on the LinkedIn Company page. Also, visit our InfoSec blog, Secplicity, for real-time information about the latest threats and how to cope with them at www.secplicity.org. Address 505 Fifth Avenue South Suite 500 Seattle, WA 98104 Support www.watchguard.com/support U.S. and Canada +877.232.3531 All Other Countries +1.206.521.3575 Sales U.S. and Canada +1.800.734.9905 All Other Countries +1.206.613.0895 WatchGuardTechnologies,Inc. 3 Contents WatchGuard AP332CR Hardware Guide Access Point Management About Your Hardware Hardware Specifications Environmental Requirements Hardware Description Bottom Panel Top Panel Rear Panel Side Panel Mount and Connect the Access Point Wall Mount Installation Pole Mount Installation Antenna Installation Connect the Ground Wire Connect the Access Point How to Assemble the Weatherproof Connector How to Disassemble the Weatherproof Connector Ethernet Power Injector (Optional) Notices Safety Warning FCC Certification CENotice Industry Canada Certification EUDeclaration of Conformity Brazil ANATEL 6 7 7 7 8 9 9 9 10 10 15 16 17 18 18 19 20 21 22 24 24 24 25 25 27 29 4 WatchGuardTechnologies,Inc. CISPR 22 Statement Mexico NOM Japan Statement Japan VCCIClass B Statement Taiwan NCCStatement RoHS Statement WEEE Statement REACH Certificate of Compliance Declaration of Conformity 29 29 29 29 29 30 30 30 32 WatchGuardTechnologies,Inc. 5 WatchGuardAP332CRHardwareGuide WatchGuard AP332CR Hardware Guide The WatchGuard AP332CR is designed for indoor or rugged outdoor deployment conditions and built with an industrial-rated IP67 enclosure. The AP332CR features 802.11ax 2x2 2.4 GHz and 5 GHz dual concurrent radios that support data rates up to 1148 Mbps on the 2.4 GHz band and 2402 Mbps on the 5 GHz band. Power is provided by a PoE+ (Power over Ethernet) power source. WatchGuardTechnologies,Inc. 6 WatchGuardAP332CRHardwareGuide Access Point Management You can manage the AP332CR with WatchGuard Cloud. WatchGuard Cloud delivers a simplified platform for Wi-Fi management to easily deploy, configure, and monitor your wireless networks. For more information on how to set up your access point with WatchGuard Cloud, see watchguard.com/start. About Your Hardware Hardware Specifications Hardware Processor Memory Radios Antennas Description Qualcomm Cypress IPQ6010-0 Cypress Quad-core A53 1.8GHz n NOR Flash 8MB n NAND Flash 256MB n RAM: DDR3L 512MB x 2 n Radio 1: 2.4 GHz 2x2 802.11b/g/n/ax n Radio 2: 5 GHz 2x2 802.11a/n/ac/ax n 2 x 2.4 GHz, 5 dBi n 2 x 5 GHz, 5 dBi 4 x omnidirectional antennas are included. Note:The device must have antennas connected for full range and functionality. Ethernet Interfaces 1 x 2.5 GbE Ethernet port Power Interface PoE+ 802.3at 48-57V DC Power Consumption n Average: 11.52W n Peak: 11.98W 25,000 hours at 25C / 77F MTBF

(Mean Time Between Failures) Dimensions 190mm x 124mm x 47mm (7.5 x 4.9 x 1.85) Weight 0.82 kg (1.8 lbs) 7 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Environmental Requirements To safely install your WatchGuard access point, we recommend that you:

n Install the device per local regulations n Make sure the device has adequate clearance for air flow and cooling This equipment is not suitable for use in locations where children are likely to be present. Other environmental requirements:

Operating Temperature

-20C to 60C (-4F to 140F) Operating Humidity 5% to 95% non-condensing Non-operating Temperature

-40C to 80C (-40F to 176F) Non-operating Humidity 5% to 95%, non-condensing WatchGuardTechnologies,Inc. 8 WatchGuardAP332CRHardwareGuide Hardware Description Bottom Panel 2.4GHz Antenna connector for the 2.4 GHz radio. LAN(PoE) The LAN (PoE) port is a 2.5 GbE port that connects the access point to a wired LAN connection through a switch or hub. This port also provides PoE+ (802.3at) power for the access point. 5GHz Antenna connector for the 5 GHz radio. Top Panel 5GHz Antenna connector for the 5 GHz radio. 2.4GHz Antenna connector for the 2.4 GHz radio. 9 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Rear Panel GroundConnector Use the included ground screw to attach the ground wire to the ground connector on the rear of the access point and attach the other end of the wire to a nearby grounding point. Side Panel LEDIndicators The access point has LED indicators that can show status conditions for the device connection to WatchGuard Cloud. The LED indicator status depends on the firmware version on the device. Access Point Firmware 1.1.7-0 and Higher Wi-Fi in WatchGuard Cloud access points that run firmware 1.1.7-0 and higher have LEDindicators that can show different status conditions while booting, activation validation, feature key download, WatchGuard Cloud device registration, and the connection to WatchGuard Cloud. The access point briefly passes through each stage until the device is connected to WatchGuard Cloud and shows a solid blue LEDindicator. If the access point remains in the same state for a long period of time without a solid blue LED indicator status, there might be a network issue, activation or feature key issue, or a problem with your WatchGuard Cloud account. Check the following table for the status of the LEDindicators and how to troubleshoot the issue. WatchGuardTechnologies,Inc. 10 WatchGuardAP332CRHardwareGuide LEDColor Status Troubleshooting Solid Red or Orange Device is booting If the access point remains in this state, the access point processes might not have started, or there might be an issue with the access point firmware. Flashing Red or Orange

(Fast:100 milliseconds) Validate access point activation and download feature key n Disconnect and reconnect power to reboot the access point to see whether the device connects. n Try to log in to the access point command line interface

(CLI) to check the device status, current firmware version, and run diagnostic tests. For more information, see AccessPoint Command Line Interface. If the access point remains in this state:

n Make sure you have activated your access point with a valid device serial number and license key in your WatchGuard account. The license key must be for a WatchGuard Standard or USP Wi-Fi license for Wi-Fi in WatchGuard Cloud. n Make sure the access point is connected to the network and has received an IPaddress from DHCP. n Make sure the access point can connect to

*.watchguard.iofor product activation and feature key updates. n If you set up an access point behind a firewall that performs inspection on HTTPS traffic, you must add

*.watchguard.ioto the content inspection exception /

bypass list to enable the access point to receive a feature key from WatchGuard servers. On the WatchGuard Firebox, this is enabled by default for cloud-managed Fireboxes in WatchGuard Cloud. n Use the access point command line interface (CLI) to check the feature key status, download a feature key, and run diagnostic tests. For more information, see AccessPoint Command Line Interface. Flashing Red or WatchGuard If the access point remains in this state:

Orange Cloud device

(Medium: 500 registration milliseconds) n Make sure access point can connect to

*.watchguard.comfor WatchGuard Cloud device registration. 11 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide LEDColor Status Troubleshooting n For service providers, make sure you have allocated the access point from your inventory to a subscriber account. For more information, see Access Point Allocation. n Make sure you have added the access point to your WatchGuard Cloud subscriber account. For more information, see Add an Access Point to WatchGuard Cloud. Flashing Red or Connection to If the access point remains in this state:

Orange

(Slow: 2 seconds) WatchGuard Cloud servers n Make sure the access point can connect to

*.watchguard.comfor WatchGuard Cloud management connections and is not blocked by a firewall or other network device. n Make sure you do not have an expired MSSPlicense for the access point. n Check the access point allocation status to see whether the device was deallocated from the subscriber account. Solid Blue Successfully Device is online and connected to WatchGuard Cloud. connected to WatchGuard Cloud Flashing Blue Flash LED LED flashes blue for 60 seconds for identification. action from WatchGuard Cloud Access Point Firmware 1.1.4-0 and Lower Wi-Fi in WatchGuard Cloud access points that run firmware 1.1.4-0 and lower have basic LEDindicators that can show if the device is successfully connected to WatchGuard Cloud. If the access point remains in the same state for a long period of time without a solid blue LED indicator status, there might be a network issue, activation or feature key issue, or a problem with your WatchGuard Cloud account. Check the following table for the status of the LEDindicators and how to troubleshoot the issue. WatchGuardTechnologies,Inc. 12 WatchGuardAP332CRHardwareGuide LEDColor Status Troubleshooting Solid Red or Orange Device is booting and connecting to WatchGuard Cloud A permanent solid red or orange LED after booting is very rarely a hardware issue. It might take several minutes before the access point successfully connects to WatchGuard Cloud. In most cases a network issue, blocked port, licensing, or WatchGuard Cloud account issue will result in the access point not connecting or appearing in your WatchGuard Cloud account. n Make sure you have activated your access point with a valid device serial number and license key in your WatchGuard account. n If you are a service provider, make sure you have allocated the activated access point to a subscriber account in WatchGuard Cloud. For more information, see Access Point Allocation. n Make sure you have added the access point device to your WatchGuard Cloud subscriber account. For more information, see Add an Access Point to WatchGuard Cloud. n If you have configured DHCP, make sure your access point has received an IP address from DHCP and can connect to the network. n Access points use TCP port 443 to connect to WatchGuard Cloud. Access points must also be able to connect to these destinations:

o *.watchguard.iofor product activation and feature key updates o *.watchguard.comfor WatchGuard Cloud registration and connections n If you set up an access point behind a firewall that performs inspection on HTTPS traffic, you must add

*.watchguard.ioto the content inspection exception /

bypass list to enable the access point to receive a feature key from WatchGuard servers. On the WatchGuard Firebox, this is enabled by default for cloud-managed Fireboxes in WatchGuard Cloud. Use the access point command line interface (CLI) to check the feature key status, download a feature key, and run diagnostic tests. For more information, see AccessPoint Command Line Interface. 13 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide LEDColor Status Troubleshooting Flashing Red or Orange Device cannot connect to WatchGuard Cloud This can occur for several reasons, for example:

n Device did not receive an IPaddress from DHCP n Device cannot connect to *.watchguard.comor

*.watchguard.iobecause of a network issue or blocked port Use the access point command line interface (CLI) to run network connectivity diagnostic tests. For more information, see AccessPoint Command Line Interface. Solid Blue Successfully Device is online and connected to WatchGuard Cloud. Flashing Blue connected to WatchGuard Cloud Flash LED action from WatchGuard Cloud LED flashes blue for 60 seconds for identification. Current factory default access points ship with firmware version 1.1.4-0 or lower. WatchGuardTechnologies,Inc. 14 WatchGuardAP332CRHardwareGuide Mount and Connect the Access Point Your package includes these accessories:

The MAC address and serial number of your access point are printed on a label on the back of the device. Make sure you record this information before you mount the device. 15 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Wall Mount Installation Use the supplied wall-mounting accessories to install the access point on a wall. 1. Mark the location on the wall surface for the four mounting holes of the wall mounting bracket. n Use an appropriate drill bit to drill holes that are 8.1mm diameter and 26mm depth in the markings and hammer the bolts into the openings. n Screw the anchors into the holes until they are flush with the wall. 2. Screw the included screws into the anchors. 3. Slide the mount bracket into the slot of the access point. WatchGuardTechnologies,Inc. 16 WatchGuardAP332CRHardwareGuide Pole Mount Installation Use the supplied pole mount accessories to install the access point on a pole. 1. Insert the pole mount clamps in the tabs on the mounting bracket and wrap the clamps around the pole. 2. Attach the access point to the mounting bracket and tighten the straps to make sure the access point is firmly attached to the pole. 17 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Antenna Installation The access point includes four antennas. n The access point requires two antennas for each radio. n On the top and bottom of the access point, there are two connectors for the 2.4 and 5 GHz radios n Insert the antennas into the connectors for each radio and turn clockwise to tighten. The device must have antennas connected for full range and functionality. You can use other third-party omnidirectional and directional antennas based on your deployment requirements. If you use other third-party antenna types, you are responsible for verifying compliance with regional-based regulations based on the peak gain values. Connect the Ground Wire To make sure your access point is safely protected from electrical events, we recommend you ground the access point according to your local regulations. Use the included screw to attach the ground wire to the ground connector on the access point and attach the other end of the wire to a nearby grounding point. WatchGuardTechnologies,Inc. 18 WatchGuardAP332CRHardwareGuide Connect the Access Point Plug one end of the Ethernet cable from your network into the LAN (PoE) port on the bottom panel of the access point. Make sure the other end of the Ethernet cable is connected to your network through a hub, switch, or injector with PoE+ (802.3at) power enabled. 19 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide How to Assemble the Weatherproof Connector Use these instructions to connect the Ethernet cable to the access point through the weatherproof connector. WatchGuardTechnologies,Inc. 20 WatchGuardAP332CRHardwareGuide How to Disassemble the Weatherproof Connector Use these instructions to disconnect the Ethernet cable from the weatherproof connector. 21 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Ethernet Power Injector (Optional) You can power the access point with an optional Ethernet Power Injector. The PoE+ power injector enables you to power the access point through an existing Ethernet connection. With this device, you do not have to position your access point near a power outlet. This device complies with IEEE 802.3at/af PoE specifications. Do not use any PoE adapters that are not IEEE 802.3at/af compliant as they may damage your device. To connect an Ethernet Power Injector to the WatchGuard access point:

1. Plug the Ethernet Power Injector into an AC power source. 2. Connect an Ethernet cable from your network backbone (for example, a PoE-capable router, switch, or hub) to the LAN connector on the Ethernet Power Injector. 3. Connect an Ethernet cable from the LAN (PoE) Ethernet interface on the access point to the PoE connector on the Ethernet Power Injector. The table provides the specifications for the power adapter. Ethernet Power Injector Specs WatchGuard Part Number 802.3at PoE+ Injector with AC cord (US/FCC) (WG8599) 802.3at PoE+ Injector with AC cord (CE) (WG8600) 802.3at PoE+ Injector with AC cord (UK) (WG8601) 802.3at PoE+ Injector with AC cord (AUS) (WG8602) Specification IEEE 802.3at/af AC Input Voltage Rating 100-240VAC Input Current 0.8A max for 100VAC WatchGuardTechnologies,Inc. 22 WatchGuardAP332CRHardwareGuide Ethernet Power Injector Specs Output Power 30W maximum Ethernet Interfaces LAN: RJ-45 for 10/100/1000/2500 Mbps data POE: RJ-45 for 10/100/1000/2500 Mbps data and power Voltage: Pin4, 5:54V, Pin7, 8:Return Indicator Power: Green Temperature Humidity Dimensions Operating: 0 - 40C (32 - 104F) Storage: -30 - 80C (-22 - 176F) 5% - 90% (Operating and storage) L = 99 mm (3.9") W = 68.5 mm (2.27") H = 33 mm(1.3") Weight 149.6 g (0.33 lbs) 23 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Please read these instructions carefully before operating the product, and refer to them as needed to ensure the continued safe operation of your product. For patent information, please visit http://www.watchguard.com/patents Safety Warning If protective earthing is used as a safeguard, the instructions shall require connection of the equipment protective earthing conductor to the installation protective earthing conductor (for example, by means of a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic interference (EMI) requirements, you must make sure the power source is connected to earth ground before you connect power to the access point. FCC Certification This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

n Reorient or relocate the receiving antenna. n Increase the separation between the equipment and receiver. n Connect the equipment into an outlet on a circuit different from that to which the receiver is n connected. n Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement:

WatchGuardTechnologies,Inc. 24 WatchGuardAP332CRHardwareGuide This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 40cm between the radiator &

your body. CENotice The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). Industry Canada Certification This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz must be such that the equipment still complies with the e.i.r.p. limit. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz must be such that the equipment still complies with the e.i.r.p. limits as appropriate. For systems that are capable of operating outdoors or with antennas mounted outdoors (where applicable antenna type(s), antenna models(s), and worst-case tilt angle(s)) are necessary to remain compliant with the e.i.r.p, therefore, the elevation mask requirement set forth in section 6.2.2.3 should be clearly indicated. Avertissement Pour les appareils avec antenne(s) amovible(s), le gain d'antenne maximal autoris pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 MHz doit tre tel que l'quipement soit toujours conforme la e.i.r.p. limite. Pour les appareils avec antenne(s) amovible(s), le gain d'antenne maximal autoris pour les appareils dans la bande 5725-5850 MHz doit tre tel que l'quipement soit toujours conforme la p.i.r.e. limites le cas chant. 25 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Lorsquil y a lieu, les types dantennes (sil y en a plusieurs), les numros de modle de lantenne et les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, nonce la section 6.2.2.3, doivent tre clairement indiqus Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 42cm between the radiator &

your body. Dclaration d'exposition aux radiations Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 42cm de distance entre la source de rayonnement et votre corps. WatchGuardTechnologies,Inc. 26 WatchGuardAP332CRHardwareGuide EUDeclaration of Conformity This device complies with the essential requirements of the RED Directive 2014/53/EU. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the RED Directive 2014/53/EU:

EN62368-1:2014+A11:2017 Safety of Information Technology Equipment (ITE) EN55024:2010+A1:2015 Immunity for Information Technology Equipment (ITE) EN55032:2015+A11:2020 Electromagnetic compatibility of multimedia equipment - Emission requirements. EN55035:2017/A11:2020 Electromagnetic compatibility of multimedia equipment Immunity Requirements EN61000-3-2:2014 Limits for harmonic current emissions. EN61000-3-3:2013 Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection. EN62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz). EN301489-1V2.2.3 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility

(EMC) standard for radio equipment and services; Part 1: Common technical requirements EN301489-17V3.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility

(EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems This device is a 5 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. 27 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide EN300328V2.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the RED Directive EN301893V2.1.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the RED Directive EN50385:2017 This product standard is related to human exposure to radio frequency electromagnetic fields transmitted by base station equipment in the frequency range 110 MHz to 100 GHz. WatchGuardTechnologies,Inc. 28 WatchGuardAP332CRHardwareGuide Brazil ANATEL Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. CISPR 22 Statement Este produto no apropriado para uso em ambientes domsticos, pois poder causar interferncias eletromagnticas que obrigam o usurio a tomar medidas necessrias para minimizar estas interferncias. This is a class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Mexico NOM La operacin de este equipo est sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y

(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Japan Statement This equipment contains specified radio equipment that has been certified to the Technical Regulation Conformity Certification under Radio Law. Japan VCCIClass B Statement B VCCI-B Taiwan NCCStatement 1.

(MPE) 1mW/cm2 0.571 mW/cm2 23cm 29 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide

RoHS Statement The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous Substances (RoHS directive) that became valid on July 1, 2006. It states that all new electrical and electronic equipment put on the market within the member states must not contain certain hazardous materials. This device complies with the European Unions R0HS directive 2002/95/EC and similar regulations that may be adopted by other countries for European Sales. WEEE Statement WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment

(WEEE). The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the reduction of WEEE through reuse, recovery, and recycling of WEEE. WatchGuard is working in partnership with our European Union (EU) distribution partners to ensure that our products are in compliance with the WEEE statutes, and that the recovery of our product per the specific EU country legislative requirements is seamless for our products end users. If you have a WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at:

U.S. Customers: 877.232.3531 International Customers: +1.206.613.0456 WatchGuard is reasonably confident that our products do not contain any substances or hazardous materials presently banned by any legislation, and do not present a risk due to hazardous materials. WEEE recovery professionals should also note that these products do not have any materials that are of particular high value in their individual form. REACH Certificate of Compliance The new EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of Chemicals) came into effect on June 1, 2007. REACH is Europe's new chemicals legislation, which is applicable in all 27 EU Member States as well as the EFTA European Economic Area (EEA). REACH creates a new system for gathering information, assessing risks to human health and the environment, and authorizing or restricting the marketing and use of chemicals produced or supplied in the EEA. REACH has an impact on EEA producers and importers of finished products and users of chemicals in the course of industrial or professional activities. WatchGuard supports the overall REACH objective of improving the protection of human health and the environment and will meet all applicable REACH requirements. WatchGuard is strongly committed to working with our customers and supply chain to define and implement the REACH requirements and ensure a smooth transition to compliance. WatchGuardTechnologies,Inc. 30 WatchGuardAP332CRHardwareGuide One of the REACH requirements is that manufacturers and importers have the duty to register substances they are producing or importing. In accordance with the regulations, the products of WatchGuard do not need to be registered for the following reasons:

n WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH. n WatchGuard products are non-chemical products that are not designed to release any substance under normal and reasonably predictable application. n Our products do not contain the listed substances at more than 0.1% by weight of the whole product/part. 31 WatchGuardTechnologies,Inc. WatchGuardAP332CRHardwareGuide Declaration of Conformity WatchGuardTechnologies,Inc. 32 WatchGuardTechnologies,Inc. 33

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6148746.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Label Sample & Label Location FCC ID: Q6G-AP332CR IC: 4657A-AP332CR Bottom of EUT Label Location

Cd ; ;

Wireless Access Point atchGuard zazia: seman

, Model/225i2 : AP332CR WatchGuard Technologies, Inc, 505 Fifth Avenue South Suite 500 Seattle, WA 98104 FCC ID : Q6G-AP332CR This device complies with Part 15 of the FCC. IC : 4657A-AP332CR Rules. Operation is subject to the following INPUT/#A. = 54V VDC two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation, IP67 @DANATEL XXXKX-KK-KKXXKK Siw st {UN NOM => FAL SIN: XXXXXXXXXXXXX 31490 men =-NYCE

- | OU FE hous C D5 MAG: XXXXXXXXXXXX Ll Made In Taiwan 277-4332-001 Rev.A For patent information, please visit http:/;www.watchguard.com/patents

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6167603.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States Date: 2022-09-05 FCC ID: Q6G-AP332CR Declaration for DFS master devices We, WatchGuard Technologies, Inc. hereby declare that the device meets all the other requirements specified in Part 15E Section 15.407. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Jay Lindenauer, Vice President of Product Delivery Operations WatchGuard Technologies, Inc. Tel: 2068768103 Fax: 2065211400 E-mail: jay.lindenauer@watchguard.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6167604.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States Date: 2022-09-02 FCC ID: Q6G-AP332CR To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours,

Jay Lindenauer, Vice President of Product Delivery Operations WatchGuard Technologies, Inc. Tel: 2068768103 Fax: 2065211400 E-mail: jay.lindenauer@watchguard.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6167605.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States Date: 2022-09-02 FCC ID: Q6G-AP332CR A U T H O R I Z A T I O N L E T T E R To Whom It May Concern:

WatchGuard Technologies, Inc. hereby authorizes Trista Tsai / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission

(FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Trista Tsai / Specialist of BV CPS Taoyuan on WatchGuard Technologies, Inc.s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours,

Jay Lindenauer, Vice President of Product Delivery Operations WatchGuard Technologies, Inc. Tel: 2068768103 Fax: 2065211400 E-mail: jay.lindenauer@watchguard.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6167606.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case FCC ID: Q6G-AP332CR Description of Permissive Change The application is prepared for FCC class II permissive change by adding frequency band through software enabling to its original parent application. The adding frequency band is from 5.26 to 5.32GHz, 5.50 to 5.72GHz. The device is electrically identical in all aspects except enabling frequency bands of 5260 ~ 5320 MHz and 5500 ~ 5720 MHz. Regards, Trista Tsai / Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 ext. 4311812 Fax: 886-3-327 0892 Email: trista.tsai@bureauveritas.com Data: 2022-09-05

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6148740.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States Date: September 27, 2022 We, WatchGuard Technologies, Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: Q6G-AP332CR If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Jay Lindenauer, Vice President of Product Delivery Operations WatchGuard Technologies, Inc. Tel: 2068768103 Fax: 2065211400 E-mail: jay.lindenauer@watchguard.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6148874.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States P R O F E S S I O N A L I N S T A L L A T I O N A T T E S T A T I O N Date: 2022-09-30 FCC ID: Q6G-AP332CR We, WatchGuard Technologies, Inc. hereby declare that requirements of KDB 353028 D01 Antennas Part 15 Transmitters v01 have been met and shown on the following questions. Further we declare that the info listed below are correct and represent the product in consideration under this filing. 1. Professional installation must be justified. Description: Device is outdoor Access Point and must need special trained professional in configuring and installing the product, more details please refer to user manual exhibit. 2. Professional installation does not permit use of any antenna with the transmitter; the permitted types of antenna specified as below. Description: Below listed of Antennas has been compliance FCC Rule Part 15 requirement, more details please refer to test reports. Ant. Type Connecter Dipole R-SMA Antenna Gain (dBi) Frequency (GHz) 2.4 5.17 5 5.17 3. The applicant should address the following items when justifying professional installation.

(1) To qualify for professional installation, please explain why the hardware is not readily available to average consumer. Description: Due to this product and will not be sold directly to the general public through retail store, therefore the hardware is not readily available to average consumer.

(2) Marketing Applicant must ensure device cannot be sold via retail to the general public or by mail order. Description: This product and will not be sold directly to the general public through retail store. It will be sold to authorized dealers or installers only. WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States

(3) Applicant must show that device intended use is not for consumers and general public. Description: Device is for industrial/commercial use.

(4) Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRES it to be installed by a professional installer?

Description: Device is outdoor Access Point and must need special trained professional in configuring and installing the product. Professional installation does not permit use of any antenna with the transmitter, the permitted types of antenna is specified. More details please refer to user manual exhibit. 4. Other professional installation requirements

(1) Installation must be controlled. Description: The product will be distributed through controlled distribution channel which has special trained professional to install this product

(2) Installed by licensed professionals. Description: Device sold to dealer who hires installers and need special trained professional in configuring and installing the product.

(3) Installation requires special training. Description: The product needs special programming, access to keypad, field strength measurements made, so must need special trained professional in configuring and installing the product. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Jay Lindenauer, Vice President of Product Delivery Operations WatchGuard Technologies, Inc. Tel: 2068768103 Fax: 2065211400 E-mail: jay.lindenauer@watchguard.com

EnGenius Technologies 1580 Scenic Avenue, Costa Mesa, California, 92626, United States Change In ID Authorization Letter Date: 2022-07-20 Re: Change of Identification Authorization, FCC ID: A8J-EWS850AP To Whom It May Concern:

This letter grants authorization for representative of WatchGuard Technologies, Inc. to apply to FCC for a change in identification as specified under 47CFR2.933 of the FCC rules. This authorization applies to EnGenius Technologies, FCC ID:

A8J-EWS850AP (08/13/2020). We are aware that WatchGuard Technologies, Inc. intends to market the above referenced product under their own FCC ID:

Q6G-AP332CR. Sincerely yours,

Meng Chee Leo / General Manager EnGenius Technologies Tel: 888.735.7888 Ext. 888 Fax: 714.432.8667 E-mail: mc.leo@engeniustech.com

WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner / Review Engineer Subject: Request to change in identification per section 2.933 of FCC rules Date: 2022-07-28 Reference: FCC ID: Q6G-AP332CR To The Commission:

This Change of Identification request applies for a new FCC ID: Q6G-AP332CR as established in 47CFR 2.933(b) for a currently approved device. This application by WatchGuard Technologies, Inc. will establish a new FCC ID under Q6G grantee code for purpose of marketing. The original grant to FCC ID: A8J-EWS850AP will remain in effect. An authorization letter by EnGenius Technologies is attached. Per 2.933(b) 1. The original identification is FCC ID: A8J-EWS850AP 2. The original grant date is 08/13/2020. 3. The equipment is electrically identical. Only the FCC ID number is 4. The original test results are applicable and representative of this changed different. device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

Cover Letter External Photos FCC ID label format and location Sincerely yours,

Jay Lindenauer, Vice President of Product Delivery Operations WatchGuard Technologies, Inc. Tel: 2068768103 Fax: 2065211400 WatchGuard Technologies, Inc. 505 Fifth Avenue South, Suite 500, Seattle, Washington, 98104, United States E-mail: jay.lindenauer@watchguard.com