Firebox T40-CW Hardware Guide Firebox T40-CW BS4AE5CW About This Guide Information in this guide is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of WatchGuard Technologies, Inc. Guide revised: 1/24/2020 Copyright, Trademark, and Patent Information Copyright 1998 2020 WatchGuard Technologies, Inc. All rights reserved. All trademarks or trade names mentioned herein, if any, are the property of their respective owners. Complete copyright, trademark, patent, and licensing information can be found in the Copyright and Licensing Guide, available online at https://www.watchguard.com/wgrd-help/documentation/overview. About WatchGuard WatchGuard Technologies, Inc. is a global leader in network security, providing best-in-class Unified Threat Management, Next Generation Firewall, secure Wi-Fi, and network intelligence products and services to more than 75,000 customers worldwide. The companys mission is to make enterprise-grade security accessible to companies of all types and sizes through simplicity, making WatchGuard an ideal solution for Distributed Enterprises and SMBs. WatchGuard is headquartered in Seattle, Washington, with offices throughout North America, Europe, Asia Pacific, and Latin America. To learn more, visit WatchGuard.com. For additional information, promotions and updates, follow WatchGuard on Twitter, @WatchGuard on Facebook, or on the LinkedIn Company page. Also, visit our InfoSec blog, Secplicity, for real-time information about the latest threats and how to cope with them at www.secplicity.org. Address 505 Fifth Avenue South Suite 500 Seattle, WA 98104 Support www.watchguard.com/support U.S. and Canada +877.232.3531 All Other Countries +1.206.521.3575 Sales U.S. and Canada +1.800.734.9905 All Other Countries +1.206.613.0895 WatchGuardTechnologies,Inc. i Contents WatchGuard Firebox T40/T40-W Hardware Guide Fireware OS About Your Hardware Hardware Specifications Interface Specifications Environmental Requirements Hardware Description Front Rear AC Power Adapter Wall Mounting Plate Restore Factory-Default Settings Notices Product Safety Certification Safety Warning Disclaimer Hinweise Zur Sicherheit Sicherheitshinweis Aviso De Seguridad Certificacin de seguridad del producto Advertencia de seguridad Federal Communications Commission Interference Statement IMPORTANT NOTE:
FCC Radiation Exposure Statement: (Wireless) Europe EU Declaration of Conformity (Wireless) CE Notice iv iv iv iv v v vi vi viii ix ix x xi xi xi xi xi xii xii xii xii xiii xiii xiii xiii xiv ii WatchGuardTechnologies,Inc. RoHS Statement WEEE Statement REACH Industry Canada Statement Caution:(Wireless) Avertissement:
For Mobile Device Usage (Wireless) Radiation Exposure Statement Dclaration dexposition aux radiations:
France (Wireless) Japan VCCI Notice (Class A ITE) Taiwan RoHS (T40) Taiwan Class A Notice Taiwan NCC Mexico Notice Limited Hardware Warranty Declaration of Conformity xiv xiv xv xv xvi xvi xvi xvi xvi xvi xvi xvii xvii xvii xviii xviii xx WatchGuardTechnologies,Inc. iii WatchGuardFireboxT40/T40-WHardwareGuide WatchGuard Firebox T40-CW Hardware Guide WatchGuard Firebox security appliances deliver unparalleled unified threat management, superior performance, ease of use, and value for your small organization or branch office. Our security subscriptions give you fully integrated protection from spyware, spam, viruses, worms, trojans, web-based exploits, and blended threats. From firewall and VPN protection to secure remote access, WatchGuard Firebox appliances support a broad range of network environments. This guide introduces the Firebox T40 RoHS-compliant (lead-free) hardware product. The Firebox T40 network security appliance is designed for small organizations and branch offices. Fireware OS The Firebox T40 supports WatchGuards next generation UTM OSFireware OS. Each Firebox appliance includes Fireware OS and delivers exceptional protection against today's sophisticated threats to make sure that your business stays connected. For more information on the features of Fireware OS, see Fireware Help. About Your Hardware Hardware Specifications Processor NXP LS1043A, 1.0GHz, 4-Core Memory DDR4 4GB Storage mSATA 16GB Power Supply Input Ratings: 100-240V AC, MAX 1.2A, 50-60Hz Output: 54V DC Dimensions D = 205.5 mm (8") W = 217 mm (8.5") H = 43 mm(1.7") Weight T40: 0.88 kg(1.94 lbs) T40W: 0.9 kg (1.98 lbs) iv WatchGuardTechnologies,Inc. WatchGuardFireboxT40/T40-WHardwareGuide Interface Specifications Network Interfaces 5 RJ45 connectors, 1000Base-TX (10/100/1000Mbps) 1 Embedded 4G/LTE wireless wan module Radio Type and Frequency Band
(T40CW) I/O Interfaces Dual radios, one dedicated to 2.4 GHz for 2x2, the other to 5 GHz for 4x4. Both radios operate in 802.11ac
2x USB3.0, Type-A 1 RJ45 Serial Port Environmental Requirements To safely install your Firebox, we recommend that you:
n Install it indoors. n Put it in a secure area, such as a locked room, to block the device from people who do not have permission to use it. n Connect it to a conditioned power supply to prevent damage from sudden power changes. Other environmental requirements:
n Operating temperature: 0 to 40C (32 to 104F) n Operating humidity: 5% to 90% non-condensing n Non-operating temperature: 25 to 75C (-13 to 167F) n Non-operating humidity: 0% to 95% non-condensing WatchGuardTechnologies,Inc. v WatchGuardFireboxT40/T40-WHardwareGuide Hardware Description Front Front view of the Firebox:
Failover The Failover indicator is lit when there is a WAN failover from the primary external interface to the backup interface. After the external interface connection fails back to the primary external interface, the indicator is not lit. WAP On the Firebox T40-W model, the WAP indicator is lit when the appliance is activated as a wireless access point or a wireless client. The color indicates the active wireless radio band. The light blinks when data is sent and received. The speed of the blink increases as the data flow increases. Indicator Indicator Color Wireless Band WAP Yellow Green 2.4 GHz radio band 5 GHz radio band vi WatchGuardTechnologies,Inc. WatchGuardFireboxT40/T40-WHardwareGuide NetworkInterfaceStatusIndicators The Firebox T40 has five network interfaces. There are two status indicators for each interface. Indicator Indicator Color On Interface Status Link speed: 1000 Mbps 1000 Yellow 10/100 Green Blinks (speed of blink increases as the data flow Data sent and received increases) On Link speed: 10 Mbps or 100 Mbps Blinks (speed of blink increases as the data flow Data sent and received increases) Status Mode Attn The Status indicator is lit when there is a management connection to the device. The Status indicator is lit for 30 seconds after you connect to the device with the Fireware Web UI or the command line interface. It is also lit when the device is polled by WatchGuard System Manager. The Mode indicator shows the status of the external network connection. If the device can connect to the external network and send traffic, the indicator is green. The indicator flashes if the device cannot send traffic to the external network. The Attn indicator is yellow when you start the device with the Reset button pressed. For more information, see RestoreFactory-DefaultSettings. Power( ) The Power indicator is lit to indicate power status. It is green when the Firebox is powered on. WatchGuardTechnologies,Inc. vii WatchGuardFireboxT40/T40-WHardwareGuide Rear Rear view of the Firebox:
SerialPort(Console) The leftmost port is an RJ45 serial console port. An RJ45 serial cable is not included with the device. USBInterfaces The device includes two USB 3.0 interfaces. Connect a USB storage device for USB backup and restore, or to store a support snapshot. For more information, see Fireware Help. NetworkInterfaces The Ethernet interfaces have standard RJ45 connectors and support link speeds of 10, 100, or 1000 Mbps. The Firebox T40 has five network interfaces. These interfaces are labeled 0/WAN, 1/LAN, 2, 3,
& 4
. Reset Button This resets the device. To restore the device to factory-default settings, see RestoreFactory-Default Settings. PowerSwitch Controls the power supplied to the device. Move the switch to position 1 to power on the device, or position 0 to power it off. PowerInput An AC power adapter is included with your device. Connect the AC adapter to the device and to a power source. Use only the supplied AC power adapter. viii WatchGuardTechnologies,Inc. WatchGuardFireboxT40/T40-WHardwareGuide AC Power Adapter The AC power adapter supplies power for the Firebox. Before you connect the adapter, verify that the color band on the cord matches the color ring around the power plug on the Firebox. To safely disconnect the power supply:
Slide the black plastic external housing away from the Firebox to expose the internal silver metal connector. With the internal silver connector exposed, continue to pull to disconnect the cord. A Firebox shipped outside the United States includes four power cables to connect to the AC power adapter. Use the correct power cable for the power source used in your country. WatchGuardTechnologies,Inc. ix WatchGuardFireboxT40/T40-WHardwareGuide Restore Factory-Default Settings If you have a problem in your configuration file that you cannot correct, you can restore the factory-default settings and start from a new configuration file. For example, if you do not know the administrator account passphrase, or if a power interruption causes damage to the Fireware OS, you can restore the Firebox to the factory-default settings and build your configuration again. These steps are necessary because the login, password and configuration are all kept in the system storage. All settings will remain on your firewall once set up by an administrator (when powered down or otherwise) until these Factory-Default steps are followed. To reset the Firebox to factory-default settings:
1. Power off the Firebox. 2. Press and hold the Reset button on the back of the Firebox. 3. Power on the Firebox while you continue to hold the Reset button. 4. Continue to hold the Reset button until the Attn indicator on the front of the Firebox begins to flash. 5. Release the Reset button. 6. Wait until the Attn indicator stays lit and does not flash. This can take 75 seconds or more. You must start the device again before you can connect to it. If you do not, when you try to connect to the device, a web page appears with the message, "Your device is running from a backup copy of firmware." This message also appears if the Reset button is stuck in the depressed position. If you continue to see this message, check the Reset button and start the device again. 7. Power off the Firebox. 8. Power on the Firebox. The Firebox restarts with factory-default settings. x WatchGuardTechnologies,Inc. Notices Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Please read the following instructions carefully before operating the product, and refer to them as needed to ensure the continued safe operation of your product. Product Safety Certification The WatchGuard product is safety certified under the following standards:
n CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10 n UL 60950-1, Second Edition 2014-10-14 n IEC 60950-1, 2005+A1:2009+A2:2013 n IEC 62368-1: 2014 2nd edition n EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Safety Warning n Do not place objects on the power cord. n Do not obstruct the ventilation openings. These openings prevent overheating of the machine. n Never push objects of any kind into slots or openings on this equipment. Making a contact with a voltage point or shorting out a part may result in fire or electrical shock. n When removing or installing an appliance, follow the general installation safety instructions. n You must disconnect the AC power cord from the Firebox before you remove the cover of the Firebox for any reason. n There is risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the manufacturers instructions. n Disclaimer WatchGuard shall not be held liable if the end user alters, modifies, or repairs any WatchGuard hardware appliance. Hinweise Zur Sicherheit Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu erfllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale Compliance-
Standards. Bitte lesen Sie die folgenden Anweisungen sorgfltig, bevor Sie das Produkt, und bezeichnen sie als notwendig, um den sicheren Betrieb des Gerts zu gewhrleisten. Weitere Informationen finden Sie WatchGuardTechnologies,Inc. xi Notices in der elektronischen Hardware Guide. Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert n CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10 n UL 60950-1, Second Edition 2014-10-14 n IEC 60950-1:2005+A1:2009+A2:2013 n IEC 62368-1: 2014 2nd edition n EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Sicherheitshinweis n Legen Sie keine Gegenstnde auf das Netzkabel. n Verdecken Sie nicht die Lftungsffnungen. Diese ffnungen verhindern eine berhitzung der Maschine. n Stecken Sie niemals Gegenstnde jeglicher Art in die Schlitze oder ffnungen des Gerts stecken. Der Kontakt mit einem spannungsfhrenden Punkt oder das Kurzschlieen eines Bauteils kann zu einem Brand oder elektrischen Schlag fhren. n Beim Entfernen oder Installieren eines Gertes, nach den allgemeinen Installation Sicherheitshinweise. Aviso De Seguridad Todos los productos WatchGuard estn diseados y probados para satisfacer estrictos requisitos de seguridad. Estos requisitos incluyen la homologacin de productos de seguridad y otras normas de cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el producto, y se refieren a ellos como sea necesario para garantizar el funcionamiento seguro y continuo de su producto. Informacin adicional se puede encontrar en la Gua del usuario electrnica. Certificacin de seguridad del producto El producto tiene certificacin de seguridad WatchGuard bajo las siguientes normas:
n CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10 n UL 60950-1, Second Edition 2014-10-14 n IEC 60950-1:2005+A1:2009+A2:2013 n IEC 62368-1: 2014 2nd edition n EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Advertencia de seguridad n No coloque objetos sobre el cable de alimentacin. n No obstruya las aberturas de ventilacin. Estas aberturas evitan el sobrecalentamiento de la mquina. n Nunca introduzca objetos de ningn tipo en las ranuras o aberturas del equipo. El contacto con puntos de voltaje o el cortocircuito de una pieza podra provocar un incendio o una descarga elctrica. n Al extraer o instalar un electrodomstico, siga las instrucciones generales de instalacin de seguridad. xii WatchGuardTechnologies,Inc. Notices FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted to indoor use. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This radio transmitter [FCC ID: Q6G-BS4AE5CW] has been approved by FCC to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Model Name 5718A0602300 5718A0603300 5718A0604300 5718A0605300 5718A0605300 5718A0606300 98619ZSAX031 Dipole WWAN 2.97 (band 2, 4) Support Max Peak Gain 3.0 3.3 4.4 4.5 4.6 3.9 Ant. Type PCB PCB PCB PCB PCB PCB 2.4G 2.4G 5G 5G 5G 5G 98619ZSAX031 Dipole WWAN 2.97 (band 2, 4) 2.82 (band 5, 12, 13) 2.82 (band 5, 12, 13) ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. 2. This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. 2. compromettre le fonctionnement. Lappareil ne doit pas produire de brouillage;
Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den WatchGuardTechnologies,Inc. xvii Notices The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 24cm de distance entre la source de rayonnement et votre corps The transmitter module may not be co-located with any other transmitter or antenna. Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. CAN ICES-003 (B)/NMB-003(B) The Country Code Selection feature is disabled for products marketed in the US/Canada. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. This radio transmitter [IC: 4657A-BS4AE5CW] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Model Name Ant. Type Support Max Peak Gain 5718A0602300 5718A0603300 5718A0604300 5718A0605300 5718A0605300 5718A0606300 98619ZSAX031 PCB PCB PCB PCB PCB PCB Dipole WWAN 2.4G 2.4G 5G 5G 5G 5G 98619ZSAX031 Dipole WWAN 3.0 3.3 4.4 4.5 4.6 3.9 2.97 (band 2, 4) 2.82 (band 5, 12, 13) 2.97 (band 2, 4) 2.82 (band 5, 12, 13) WatchGuardTechnologies,Inc. xvii Notices Le prsent metteur radio [IC: 4657A-BS4AE5CW] a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'metteur. Model Name Ant. Type Support Max Peak Gain 5718A0602300 5718A0603300 5718A0604300 5718A0605300 5718A0605300 5718A0606300 98619ZSAX031 PCB PCB PCB PCB PCB PCB Dipole WWAN 2.4G 2.4G 5G 5G 5G 5G 98619ZSAX031 Dipole WWAN 3.0 3.3 4.4 4.5 4.6 3.9 2.97 (band 2, 4) 2.82 (band 5, 12, 13) 2.97 (band 2, 4) 2.82 (band 5, 12, 13) CE Radiation Exposure Statement:
This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 24cm between the radiator & your body. Europe EU Declaration of Conformity (Wireless) This device complies with the essential requirements of the RED 2014/53/EU. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the RED 2014/53/EU:
n EN 60950-1 - Safety of Information Technology Equipment n EN 50385 - Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) n EN 62368-1:2014+A11:2017 - Safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards. WatchGuardTechnologies,Inc. xiii Notices n EN 300 328 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the RED Directive n EN 301 893 - Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;
Harmonized EN covering essential requirements of article 3.2 of the RED Directive n EN 301 489-1 - Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements n EN 301 489-17 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. CE Notice symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the The Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union
(EU). RoHS Statement The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous Substances (RoHS directive) that became valid on July 1, 2006. It states that all new electrical and electronic equipment put on the market within the member states must not contain certain hazardous materials. This device complies with the European Unions R0HS directive 2002/95/EC and similar regulations that may be adopted by other countries for European Sales. WEEE Statement WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment
(WEEE). The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the reduction of WEEE through reuse, recovery, and recycling of WEEE. xiv WatchGuardTechnologies,Inc. Notices WatchGuard is working in partnership with our European Union (EU) distribution partners to ensure that our products are in compliance with the WEEE statutes, and that the recovery of our product per the specific EU country legislative requirements is seamless for our products end users. If you have a WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at:
U.S. Customers: 877.232.3531 International Customers: +1.206.613.0456 WatchGuard is reasonably confident that our products do not contain any substances or hazardous materials presently banned by any legislation, and do not present a risk due to hazardous materials. WEEE recovery professionals should also note that these products do not have any materials that are of particular high value in their individual form. REACH The new EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of Chemicals) came into effect on June 1, 2007. REACH is Europes new chemicals legislation, which is applicable in all 27 EU Member States as well as the EFTA European Economic Area (EEA). REACH creates a new system for gathering information, assessing risks to human health and the environment, and authorizing or restricting the marketing and use of chemicals produced or supplied in the EEA. REACH has an impact on EEA producers and importers of finished products and users of chemicals in the course of industrial or professional activities. WatchGuard supports the overall REACH objective of improving the protection of human health and the environment and will meet all applicable REACH requirements. WatchGuard is strongly committed to working with our customers and supply chain to define and implement the REACH requirements and ensure a smooth transition to compliance. One of the REACH requirements is that manufacturers and importers have the duty to register substances they are producing or importing. In accordance with the regulations, the products of WatchGuard do not need to be registered for the following reasons:
n WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH. n WatchGuard products are non-chemical products that are not designed to release any substance under normal and reasonably predictable application. n Our products do not contain the listed substances at more than 0.1% by weight of the whole product/part. Industry Canada Statement This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3
(B) Ce dispositif est conforme la norme CNR-247 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. WatchGuardTechnologies,Inc. xv Notices Caution:(Wireless)
(i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
Les dispositifs fonctionnant dans la bande 5150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. For Mobile Device Usage (Wireless) Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. France (Wireless) Les dispositifs fonctionnant dans la bande 5150-5250 MHz est rserv une utilisation en intrieur pour rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite utilisant les mmes canaux;
propia operacin no deseada. Japan VCCI Notice (Class A ITE) VCCI A VCCI-A Taiwan Wireless Statement xvi WatchGuardTechnologies,Inc. Taiwan RoHS (T40) Notices Taiwan Class A Notice Taiwan NCC MPE (MPE) 1mW/cm2 0.369 mW/cm2 Lithium-Ion Battery Warning CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions. This system should placed only in locations where it is unlikely that children will be present. WatchGuardTechnologies,Inc. xvii Notices Mexico Notice La operacin de este equipo est sujeta a las siguientes dos condiciones:
(i) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(ii) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Limited Hardware Warranty This Limited Hardware Warranty (the Warranty) applies to the enclosed hardware product, not including any associated software, which is licensed pursuant to a separate end-user license agreement and warranty (the Product). BY USING THE PRODUCT, YOU (either an individual or a single entity) AGREE TO THE TERMS HEREOF. If you do not agree to these terms, please return this package, along with proof of purchase, to the authorized dealer from which you purchased it for a full refund. WatchGuard Technologies, Inc.
(WatchGuard) and you agree as set forth below or on the reverse side of this card, as applicable. 1. LIMITED WARRANTY. WatchGuard warrants that upon delivery and for one (1) year thereafter (the Warranty Period): (a) the Product will be free from material defects in materials and workmanship, and
(b) the Product, when properly installed and used for its intended purpose and in its intended operating environment, will perform substantially in accordance with WatchGuard applicable specifications. This warranty does not apply to any Product that has been: (i) altered, repaired or modified by any party other than WatchGuard except for the replacement or inclusion of specified components authorized in, and performed in strict accordance with, documentation provided by WatchGuard; or (ii) damaged or destroyed by force majeure events, accidents, power spikes or similar events or by any intentional, reckless or negligent acts or omissions of any party. You may have additional warranties with respect to the Product from the manufacturers of Product components. However, you agree not to look to WatchGuard for, and hereby release WatchGuard from any liability for, performance of, enforcement of, or damages or other relief on account of, any such warranties or any breach thereof. 2. REMEDIES. If any Product does not comply with the WatchGuard warranties set forth in Section 1 above, WatchGuard will, following the receipt of the product you claim is defective and at its option, either (a) repair the Product, or (b) replace the Product with a like or similar product; provided, that you will be responsible for returning the Product and for all costs of shipping and handling. Repair or replacement of the Product shall not extend the Warranty Period. Any Product, component, part or other item replaced by WatchGuard becomes the property of WatchGuard. WatchGuard shall not be responsible for return of or damage to any software, firmware, information or data contained in, stored on, or integrated with any returned Products. 3. DISCLAIMER AND RELEASE. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD, AND YOUR REMEDIES, SET FORTH IN PARAGRAPHS 1 AND 2 ABOVE ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND YOU HEREBY WAIVE, DISCLAIM AND RELEASE ANY AND ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD AND ALL OTHER RIGHTS, CLAIMS AND REMEDIES YOU MAY HAVE AGAINST WATCHGUARD, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH xviii WatchGuardTechnologies,Inc. Notices RESPECT TO ANY NONCONFORMANCE OR DEFECT IN THE PRODUCT (INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE, ANY WARRANTY O NONINFRINGEMENT, ANY WARRANTY OF UNINTERRUPTED OR ERROR-FREE OPERATION, ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE (WHETHER ACTIVE, PASSIVE OR IMPUTED) OR FAULT OF WATCHGUARD OR FROM PRODUCT LIABILITY, STRICT LIABILITY OR OTHER THEORY, AND ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY, THE PRODUCT). 4. LIMITATION AND LIABILITY. WATCHGUARDS LIABILITY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE LIABLE TO YOU OR ANY THIRD PARTY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) FOR COST OF COVER OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS OF PROFITS, BUSINESS, OR DATA) ARISING OUT OF OR IN CONNECTION WITH THIS WARRANTY OR THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF WATCHGUARD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. 5. MISCELLANEOUS PROVISIONS. This Warranty will be governed by the laws of the state of Washington, U.S.A., without reference to its choice of law rules. The provisions of the 1980 United Nations Convention on Contracts for the International Sales of Goods, as amended, shall not apply. You agree not to directly or indirectly transfer the Product or use of the product or associated documentation to any country to which such transfer would be prohibited by the U.S. Export laws and regulations. If any provision of this Warranty is found to be invalid or unenforceable, then the remainder shall have full force and effect and the invalid provision shall be modified or partially enforced to the maximum extent permitted by law to effectuate the purpose of this Warranty. This is the entire agreement between WatchGuard and you relating to the Product, and supersedes any prior purchase order, communications, advertising or representations concerning the Product AND BY USING THE PRODUCT YOU AGREE TO THESE TERMS. IF THE PRODUCT IS BEING USED BY AN ENTITY, THE INDIVIDUAL INDICATING AGREEMENT TO THESE TERMS BY USING THE PRODUCT REPRESENTS AND WARRANTS THAT (A) SUCH INDIVIDUAL IS DULY AUTHORIZED TO ACCEPT THE WARRANTY ON BEHALF OF THE ENTITY AND TO BIND THE ENTITY TO THE TERMS OF THIS WARRANTY; (B) THE ENTITY HAS THE FULL POWER, CORPORATE OR OTHERWISE, TO ENTER INTO THE WARRANTY AND PERFORM ITS OBLIGATIONS UNDER THE WARRANTY AND; (C) THE WARRANTY AND THE PERFORMANCE OF THE ENTITYS OBLIGATIONS UNDER THE WARRANTY DO NOT VIOLATE ANY THIRD-PARTY AGREEMENT TO WHICH THE ENTITY IS A PARTY. No change or modification of the Warranty will be valid unless it is in writing and is signed by WatchGuard. WatchGuardTechnologies,Inc. xix DeclarationofConformity Declaration of Conformity xx WatchGuardTechnologies,Inc.