FCC ID: 2AO37ATLASLOUD ProCom

Atlas Loud Mouth DIGITAL WIRELESS INTERCOM Table of Contents I Contents I Caution Certificate Introduction

---------------------------------------------02

-------------------------------------------03 Product Image

---------------------------------- 04 Function Power Volume Setting Channel Setting Mic Volume Level Mic Mute How to reset case of malfunction How to charge

----------------------------------------- 05

------------------------------- 06

------------------------------- 06

--------------------------- 07

----------------------------------- 07

----------- 08

------------------------------ 08 FAQ

----------------------------------------------- 09 Specifications and Caution

--------------------------10

-01-

Caution Atlas LM operates in the license-free 900MHz ISM band. Atlas LM subject to the Rules and Regulations of the FCC. This device complies with part 15 of the FCC rules. Operation is subject to th e following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interferenc e that may cause undesired operation. THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFI NOTE:

CATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICA TIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. NOTE: This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide re asonable protection against harmful interference in a residential installation. This equipment generates us es and can radiate radio frequency energy and, if not installed and used in ac cordance with the instructions, may cause harmful interference to radio com munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to whi ch the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

-02-

Caution

* Do not put sharp, hard materials into the connector hole when using this product.

* Do not put apart or repair Atlas LM yourself.

* Do not leave Atlas LM in a vehicle in hot or cold weather.

* Leaving Atlas LM in a closed area for a long period of time may result in deformation or malfunction of this product.

* For charging use only the provided charger & cable. Using a third party charger may cause explosion, fire or malfunction.

* Stop using Atlas LM immediately if you smell something like smoke from this.

* Stop using Atlas LM immediately when exposed to risk of fire and call the customer center and consult if you can use Atlas loud at the environment.

* Please do not use third partys components.

* If you use a third party component, it could cause breakdown or malfunction.

* Be careful not to apply strong pressure on this product, which may cause breakdown or damage to the product.

* If dirt slips in, the quality could decline, so make sure to clean the product with soft cloth often.

* If Atlas loud submerges under water, dont put apart or repair it yourself. Please turn the power off and call our customer service center. Certification :

Identification Code : Shown below Company Name:

Manufacturer/Country:

Date of manufacturing: Marked Separately Model Name: Shown Below Input Rating: Shown Below Date of Manufacture: Separately Shown Model Name Input Rating Identification Code

-03-

Introduction Product Image FRONT Power/Select Mute TOP & SIDE & BOTTOM Charging LED Link LED Mic Channel Up Volume Up Channel Down Volume Down Speaker Charging port Mount

-04-

Function Power 1. Power on, off with PWR button 2 sec Note If device is left in standby mode for half hour, it is automatically turned off for power-saving. Standby status means the device is ready for pairing (No connection)

-05-

Function 2. Volume Setting Volume level ranges from 0 to 8. Note Volume 0 means no audio volume 3. Channel Setting Devices should be set to same channel number for communication. If there are multiple communication groups in the same channel nearby, set channel number different from other groups to avoid potential interference. STEP 1 Choose between Channel 1 and Channel 6 Select a channel number by pressing Channel Up or Down button Note There should be one Master Device for group communication.

-06-

Function 4. Mic Level You can adjust the Microphone Volume level. With this function your voice transmission is clearer if you set it right, depending on your voice level. STEP 1 Press&hold button and Volume Up Button to control mic level

STEP 2 Choose between 0 and 8 (The higher number you choose, the higher microphone volume it transmits) Mic Level 0 means microphone is mute 5. Mic Mute User 1~12 can mute microphone by pressing M button shortly. Users only listen if they mute microphone. Push M button to activate/deactivate mute.

-07-

Function 6. How to reset in case of malfunction

Press these buttons together at the same time. Then the device goes off. Note Be careful not to press these buttons together during normal operation. 7. How to charge While on charge, red light on the lower display lights up and the green light becomes dimmer once the device is fully charged. Note Please use only the provided charging adapter or use 5V / 2A adapter or higher than that. The battery level indication while on charge could be different from the actual battery level. We dont recommend charging a device with power on. If you leave a device charged with power on for one day, it could self-discharge.

(When this happens, please make sure to re-charge it) Please make sure to turn off the device before charging it to get it fully charged.

-08-

FAQ Following is the list of frequent questions and answers. 1 I cant communicate with other devices.

- Check if your device is paired with Master Device.

- In your group, check if Master Device exists. 2 I cannot join a group communication.

- Check if other users are connected on the display.

- Check if there is a Master Device in the group.

- You might be too far from Master Device to get the signal from it. 3 I cannot turn on the device.

- Put your device to the charger for charging and then turn it on. 4 I lost connections sometimes.

- Check if other users are connected on the display.

- Check if someone is using the same user number as mine 5 Other users voice sounds broken.

- Check if the distance between the users is too far. 6 Other users can barely hear my voice.

- Check if you set MIC level low.

- Check if the headset microphone is a little far from your mouth 7 8

-09-

Specification & Caution Frequency 902MHz~928MHz Transmission Distance 1Km (Line of Sight) Battery Lifetime 10Hour Battery Rechargeable Li-ion 3.7V Battery Transmission Output 250mW Weight 380g Size Width(w) : 105mm Height(h) : 105(117.1)mm Thickness(t) : 40.7(49.3)mm Working Temperature

-10/+50 Modulation System FSK Transmission Method TDMA The function may change without notice for product improvement purpose. Transmission distance may vary depending on the surroundings obstacles and humidity. I Caution I Please make sure to read through the below safety requirements before using this product. If these are not followed well, incidents like fire or explosion may happen.

- DO NOT separate / modify the antenna or DO NOT use the modified antenna. It degrades performance of the device, which results in serious breakdown as the intercom generates strong radio wave through the antenna.

- Only the provided charging adapter and headset are acceptable to use with this device, so DO NOT use a third-party adapter and headset. Otherwise, the battery will be damaged and there will be a malfunction of the device.

- Use this device only for communication (NOT for other purposes).

- Do not take apart or modify this device yourself. Otherwise, this could result in a malfunction which our warranty doesnt cover. Also, you might be subject to a penalty according to a relevant communication law.

- Do not change the frequency or use other frequency than the allowed frequency. Otherwise, you might be subject to a penalty according to a relevant communication law.

- A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements

* Try not to put strong physical shocking to this device.

* Keep it out of direct sunlight and high humidity.

* DO NOT leave the device in a car in the summer.

-10-

FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :

(1) This Device may not cause harmful interface, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Page 1 of 1 IDENTIFICATION LABEL:

PROPOSED LABEL The shall be permanently affixed in the rear side of the equipment

Westcom Wireless Inc. Section 2.911(d)(5)(ii) Certification Applicant (Covered List

) Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name: ProCom FCC ID: 2AO37ATLASLOUD Model(s): ATLAS LM 2.911(d)(5)(ii) Applicant filing We, Westcom Wireless Inc. (the applicant) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Frank Dominick Girardi Date: July 27, 2023 Title and Company name: President / Westcom Wireless Inc. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Westcom Wireless Inc. Section 2.911(d)(5)(i) Certification Equipment Type Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name: ProCom FCC ID: 2AO37ATLASLOUD Model(s): ATLAS LM 2.911(d)(5)(i) Equipment Type We, Westcom Wireless Inc. (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Frank Dominick Girardi Date: July 27, 2023 Title and Company name: President / Westcom Wireless Inc. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Letter of Authorization Company

: Westcom Wireless Inc. Address

: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name : ProCom Model Number : ATLAS LM FCC Identifier : 2AO37ATLASLOUD We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Frank Dominick Girardi Date: July 27, 2023 Title: President Signature of applicant:

Westcom Wireless Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AO37ATLASLOUD Date: July 27, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Frank Dominick Girardi Title: President

Westcom Wireless Inc. Section 2.911(d)(7) USA Agent for Service of Process

(Applicant is Both Grantee and U.S. Agent) Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name: ProCom Grantee code: 2AO37 Model(s): ATLAS LM 2.911(d)(7) USA Designated Agent for Service of Process This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. 2.911 (d)(7)USA Agent v1.3 Westcom Wireless Inc. Applicant / USA Agent Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States FCC Grantee Code: 2AO37 FRN No.: 0023758659 Contact Name: Frank Dominick Girardi Telephone No: 724-337-1400 Email: frank@2wayinc.com Signature:

Title: President Date: July 27, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.3