UA-220 User Manual Address: 4th floor No2 Building Xuzhuang Software Industry Base No 699 8 XuanWu Avenue Manufacture: Woxu Wireless Co,Ltd. Nanjing China Copyright Notice Copyright 2020 Woxu Wireless Co., Ltd. and its license all rights reserved, all rights reserved. Without prior written permission of the company, any unit or individual shall not be allowed to extract and copy all or part of the contents of this book, and shall not in any form of communication. This manual is likely to change as a result of product version upgrade or other reasons. Our company reserves the right to modify the contents of this manual without any notice or prompt. This manual is only for the use of guidance, I tried their best to in this manual provide accurate information, but our company does not ensure that the content of the manual no mistakes, the manual of all statements, information and advice does not constitute any express or implied warranty. Security notice Important! Before the product is started, please read the safety and compatibility information of this product. IMPORTANT!
See Compliance and Safety information for the product before connecting to the supply. Environmental protection This product meets the design requirements on environmental protection, product storage, use, and disposal shall comply with relevant national laws, regulations, requirements 2 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Preface Location Anchor is a kind of anchor based on UWB manufactured by Woxu Wireless Co.,Ltd., which is for human and goods indoor location with high precision. This document introduces the method to use and configure the anchor. ContentsReader, Appointment , Technical support Reader Appointment This manual is mainly applicable to the following engineers:
0. Students and teachers and developers 0. Engineer The book also uses a variety of eye-catching signs to indicate that in the operation of the process should pay special attention to the place, the significance of these signs are as follows:
Attention Use Only Power Supplies listed in the user instructions Use only power adaptor model UES12LZ supplied by UE Electronic The improper operation may result in loss of data or damage to equipment, which should be paid attention to in the operation. Description Description of the operation of the contents of the necessary complement and description Technical Support When you are installing or using this product, please contact me directly in accordance with the contact information provided in this document. FCC Caution:
authority to operate the equipment. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 3 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The operators should cease operation when the harmful Interference occurs to other users. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This equipment only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. This device may not be employed for the operation onboard an aircraft, a ship or a satellite is prohibited. 4 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved CONTENT Preface.................................................................................................................................................... 3 CONTENT ............................................................................................................................................. 5 1 Configuration ...................................................................................................................................... 6 1.1 WEB ......................................................................................................................................... 6 1.2 About page ............................................................................................................................... 8 1.3 status ........................................................................................................................................ 8 1.3.1 Wireless ......................................................................................................................... 8 1.3.2 Statistics ........................................................................................................................ 9 1.3.3 Network information ..................................................................................................... 9 1.3.4 Device information ....................................................................................................... 9 1.4 Set Wi-Fi network .................................................................................................................. 10 1.4.1 Basic configuration ..................................................................................................... 10 1.4.2 Wi-Fi scan ................................................................................................................... 12 1.5 Network set ............................................................................................................................ 12 1.6 Management ........................................................................................................................... 13 1.6.1 Basic setting ................................................................................................................ 13 1.6.2 FW Upgrade ................................................................................................................ 14 1.6.3 Configuration management ......................................................................................... 15 1.6.4 System log ................................................................................................................... 16 1.6.5 System service ............................................................................................................ 16 1.6.6 Reboot ......................................................................................................................... 17 1.7 UWB ...................................................................................................................................... 17 1.7.1 Basic settings .............................................................................................................. 18 1.7.2 Advanced..................................................................................................................... 18 1.7.3 Statistics ...................................................................................................................... 19 1.7.4 Upgrade ....................................................................................................................... 19 1.7.5 Gateway ...................................................................................................................... 20 5 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved 1 Configuration 1.1 WEB Web information in default is as below:
IP address User name Key Device information list Device information 192.168.1.9 woxuwireless woxuwireless note Changeable NOT Changeable Changeable 1. If you change the key, please save the key, if you really forgot it, please contact us or your seller. Attention Log in Web as below step
(1) Connect device and PC Connect the PC to the devices network over cable.
(2) Configure PCs IP address to make sure the device can communicate each other. Please change your local network IP as 192.168.1.110, see below picture:
6 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved
(3) Start up the browser and input log-in information, Start up the browser in PC, input the devices IP address in address bar, (default IP is 192.168.1.9),you can log in the Web pages, Input user name woxuwireless,Keywoxuwireless, click <login>. 7 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Login display page 1.2 About page Function selection Function Page list 1. Function selection, select the different function item, in the main function region, will 2. Function, Web pages are mainly presented and operated, such as status display, network About web page, there are three regions:
display the corresponding item. configuration, etc. 3. Status and configuration In this item, includes"WLAN","Statistics""Network","Device", display different information. Wireless information is used to display the relevant information. 1.3 status 1.3.1 Wireless 8 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved The wired part and the wireless part respectively count the number of packets received and sent and the number of errors. 1.3.3 Network information 1.3.2 Statistics Display device network information 1.3.4 Device information Display hardware and software information. 9 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Device display Friendly name: the device name you defined, in this device, it is displayed as UWB Gateway. Hardware version:current hardware version Software version: current running version Release time: the version released time Serial Number: current device serial number Wired MAC : current device wired physical address Wireless MAC:current device wireless address System time:current system time Uptime:current system running time Disable WLAN: If need to make the device connect Wi-Fi, do not select this frame. 1.4 Set Wi-Fi network 1.4.1 Basic configuration Wi-FiOnly support 5GHz. Wireless mode: CPE 1.4.1.1 CPE Mode Step:
1The device only supports CPE mode.SSID default is WX_RTLSAP MAC is 000000 000000Authentication & encryption mode is Open. If the device has previously been tied to AP or router, the SSID, AP MAC address, authentication / secret mode will retain the last bound status 10 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved record. 2Select wireless network scan. As below:
The device will scan the AP or router that can be searched, select the SSID that needs to be connected, and then confirm the selection button and automatically switch to the basic settings interface, just as the below picture:
1You can see that the Peer MAC address has been entered in the MAC of the destination AP, if the authentication & encryption mode does not enter the authentication & encryption mode of the destination AP, manually modify, click the application, and the binding can be generated. 2Enter status page about the wireless item to make sure the binding is successful. 11 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved 1.4.2 Wi-Fi scan You can see that the Peer MAC address has been entered in the MAC of the destination AP, if the authentication & encryption mode does not enter the authentication & encryption mode of the destination AP, manually modify, click the application, and the binding can be generated. The device will scan the AP or router that can be searched to display its MAC address, SSID, authentication and encryption mode, signal intensity, working channel and mode. Select any of them, automatically jump to the wireless settings page, and fill in the relevant information about SSID and identity. When click refresh, the device will scan on AP and display the scanning result. 1.5 Network set System network mode: IP address,subnet mask,default gateway,DNS server 1,DNS server 2 Network set 12 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Attention When modifying the device IP, note that the IP of PC is in the same network segment as device IP, but it cannot be the same. For example, the device IP is 192.168.1.3, and the IP of PC can be set to 192.168.1.1,192.168.1.254,192.168.1.3,Among them, 192.168.1.X represents the network segment and needs to be consistent. Modify IP address Modify the IP address IP address:its IP address about LAN port,default is 192.168.1.9, Subnet mask:its for LAN,default is 255.255.255.0, Default Gateway:It means network gateway configuration,default is 192.168.1.1, DNS server 1: DNS server configuration 1 in LAN port, default is 192.168.1.1 DNS server 2: DNS server configuration 2, default is 192.168.1.1 After configuration, click<Apply>. 1.6 Management 1.6.1 Basic setting Management includes"Basic settings","FW Upgrade","configuration management","system log","system server"and "Reboot". Basic setting is composed by three parts: device name, updated time interval, key management, language setting. 13 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Device name and updated time interval Modify device name and amend status updated time interval. Device namethe device name Status updated time interval: device status update time interval After configuration, click application, the result can be checked in the status page. Key management Amend user and password. Default user name is woxuwirelessKey is : woxuwireless. According to this page, you just need to input new key, click application. Language set Two choice: Chinese and English Select English in language settings, select USA in country. Select and click apply . 1.6.2 FW Upgrade Upgrade Wi-Fi 14 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Click <select file > to select one FW, click upload firmware, after successful upgrading, restart and display the version information. Attention In the process of upgrading firmware, power failure is not allowed. Power failure will result in unusable equipment. 1.6.3 Configuration management Three parts:backup configuration file,restore configurationand restore factory settings Backup: Backup the configuration file to an external file, and the backup file name is automatically generated into the "config" style. Restore configurationRead the contents of the external file configuration and modify the current configuration of the device. 15 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Restore factory configuration: click<factory configuration>, the configuration about the device will restored as default data. 1.6.4 System log Enable system logs to display important information about the system., select <Clear> to clear the log content. Enable remote system log, set server IP address and server port, can get the remote system log information. 1.6.5 System service Four parts SNMPNTP managementallow management HTTP port and enable TELNET 16 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved Enable SNMPis used to set up SNMP(simple network management protocol) NTP management: manual and NTP,to set system time;
Allow management HTTP port default allow, default port is 80 Enable TELNET default is enable, default port is 23. 1.6.6 Reboot Click <reboot>, the system will reboot. 1.7 UWB Five parts Basic settings, Advanced, Statistics,UWB Upgrade,RF Gateway 17 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved 1.7.1 Basic settings Display current devices UWB version about H/W and software , set its ID, others are set off from the server. It can be selected from 0 dBm, but it is not for end users, it is for technical personnel. When it sell to end users, it has been locked. 1.7.2 Advanced Used to set up sub-anchor list and team number. 18 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved 1.7.3 Statistics It is used to count the data of sending packets, sending successful data, and receiving message data. 1.7.4 Upgrade Upgrade step 1Open the Upgrade page, as below:
19 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved 2 Click select file and import bin file, such as UA220 APP V3.0.18.bin 3 Open the management page and click restart. 4 Open UWB page, check whether it is the updated version information. If it fails, restart the device and check UWB status, if it is not successful, repeat the above steps. If it always fails, please contact us. The whole software bundle is upgraded. Common users cannot modify the software. The software can be obtained by the website www.uwbleader.com or Woxu support team. The upgrade can be performed only by professional installers who have logged in to the device. 1.7.5 Gateway the gateway page As below picture,select is 192.168.1.110,server port is 44333. You can change the server IP and server port as you need, please make sure the device IP is in the same network segment, click enable log, make TAG and anchor range, will display the ranging information in log output frame. in UWB page,the server default IP 20 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved 21 Woxu Wireless Co.,Ltd. www.woxuwireless.com Copyright 2012- 2020 Woxu Wireless, All rights reserved